C/O SubTehsil Office Building Jole Tehsil Jole,Distt Una

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.(Make:- Legrand (Myrius), L&T (Oris),Anchor(Roma plus)

(a) Group C.

(b) Group A

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.(Finolex,KEI,Anchor,L&T make)

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.(Finolex,KEI,Anchor,L&T make)

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.(Finolex,KEI,Anchor,L&T make)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.(Finolex,KEI,Anchor,L&T make)

(a) 2x1.5 Sq. mm.

(b) 4x1.5 Sq. mm.

(c) 2x6 Sq. mm.

(d) 2x10 sq.mm.

(e) 2x2.5 Sq. mm.

(f) 4x2.5 Sq. mm.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.(Finolex,KEI,Anchor,L&T make)

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.(Finolex,KEI,Anchor,L&T make)

(a) 3x1.5 Sq. mm.

(b) 3X4 Sq.mm.

Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-(Diplast,Polycab make)

25 mm. dia

50 mm. dia

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.(Make:- Legrand (Myrius), L&T (Oris),Anchor(Roma plus)

S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

Supplying & fixing Modular blanking plate on the existing modular metal box as required:-

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.(Make:- Legrand (Myrius), L&T (Oris),Anchor(Roma plus) .

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required..(Make:- Legrand (Myrius), L&T (Oris), Anchor(Roma plus)

Supplying and fixing Power plug socket with MCB Protection 25 Amps with Plug top and 4 Module box including making connections,testing etc,as required.(Philips model no. 9137082339101 HSN Code 85369010/Anchor/ L&T make)

Supplying and fixing bakelite batten/angle holder including connections etc. as required:- (SSK,Anchor make)

Supplying and fixing call bell / buzzer, suitable for D.C./A.C.single phase,230 volts complete as required:-(SSK,Anchor make)

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-(SSK,Anchor make)

Supplying and fixing Indicating bell Red & Green with 3 module box on the existing main door wall complete with connections etc. as required.

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron (35 mm x 35 mm x 6 mm thick) with sufficient numbers of horizontal and vertical intermediate members (25mm x 6mm thick) flat iron including painting and bonding to the existing earth as required:-

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation made from (50 mm x 50 mm x 6 mm thick) M.S. angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides & front side hinged, complete with locking arrangement with sufficient No. vertical and horizontal intermediate switchgear supporting members each of M.S. flat 50mmx6mm thick of suitable length duly welded. The cubical pedestal shall have cable entry box at one or two sides and 4 No. legs of suitable length duly welded. The cubical pedestal shall have cable entry box at one or two sides and 4 No. legs of 50mmx50mmx6mm thick M.S. angle iron each 60 cm long including, powder coated painting and bonding to the existing earth etc., the same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:-(EVA,Power & control,Supertech make or its equivalent approved make). The panel should be approved/tested from the CPRI lab and should be confirmed to IS :-64139

(a) 300 mm deep (nominal)

Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx3.17mm),in the existing enclosure with all accessories including connections etc. as required:-

Supplying and fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required.

Providing and fixing following rating, four pole, 415 volts, On-Load change over switch unit, panel mounting, front handle operation, including drilling holes in the cubical, making connections, etc. as required.(L&T,ABB & Siemens make)

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.(L&T,ABB & Siemens make)

63 Amp. -63 KA

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Hagger,ABB,L&T make)

40 Amps. Cat-A.

63 Amps. Cat-A.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- (Hagger,ABB,L&T make)

(a) Single pole. 6 Amps.Cat-A.

(b) Single pole. 16 Amps.Cat-A.

(c) Single pole. 25 Amps.Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- (Hagger,ABB,L&T make)

(b) Double door-12 way

(c) Double door-16 way

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Providing and fixing 8 SWG (4 mm dia.) copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub-main wiring/cable as required.

Providing and fixing M.V.danger notice plate of 200 mm x 150mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:-(Finolex,Havells,L&T,KEI or its equivalent make)

(a) Armoured cable 25 sq. mm (3.5 core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-(Finolex,Havells,L&T,KEI or its equivalent make)

(a) Armoured cable 25 sq. mm (3.5 core)

Providing, Installation, testing and commissioning of ceiling fan without step type fan regulator modular, air delivery 215m3/min power input 43 watts speed 330RPM , including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- Tech. specfications:-100-240V,50 Hz,speed 330 rpm,power consumption 43 watt

Usha Technix plus BEE 3 Star rated model/crompton/Bajaj make) (Minimum 3 star rating)

(a) Ceiling Fan 1200 mm sweep, Category-A (Minmum 3 star rating)

b) Ceiling fan 1400mm sweep ISI energia Category-A (Usha/Crompton/Bajaj make, Tech. specfications:-100-240V,50 Hz,speed 330 rpm,power consumption 50 watt

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- (Usha Turbo HDEF 900rpm ISI or its equivalent make) as approved by Engineer in charge

Exhaust Fan, Light duty, 300 mm sweep

S/F of exhaust fan louver shutter i/c covering with ply board for 300 mm.exhaust fan on the existing wall,painting etc,as required (HSBC, National or its equivalent make)

S/F of Exhaust fan (Plastic) with louver shutter 300mm,1000rpm,power 55 watt,air delivery1125 Cmh suitable for 240 volts A.C.supply, 50 Hz,Bajaj maxima Dxl model on the existing opening including making proper hole complete with connections etc. as required

Supplying and fixing Fan box made of M.S.sheet with iron rod Hook 12 mm.in place of Junction box complete with bakelite Round sheet as required.in/c carriage of material with in all leads and lifts.(National or its equivalent make)

S/F of Cabin/wall fan 400 mm.sweep A.C supply 240 volts 50 HZ WF Mist Air Icy blue,1280RPM,55WATT,No. of speed=3, Air flow 67 CMM including connections, testing and commissioning etc. as required:-Usha/.Crompton Greaves or its equivalent make),

S/F Ebrit digital mounting voltmeter 0 to 500 volts 3 phase of 0.5Cl.size 96x96 sq.mm.flush mounting in existing pannel cat.No. WL132020OOOO (L&T make) or its equivalent make complete with connections etc as required.

S/F Ebrit digital mounting Ammeter 0.5 Cl. 3 phase of size 96x96 sq.mm.flush mounting in existing pannel cat.No.WL131020OOOO (L&T make) or its equivalent make complete with connections etc,as required.

S/F The Coolio Fuzi Led Panel Indicator Lights (R,Y & B) with 3. nos. Kit Kat (Neon type) to shown the three phase indicating in the existing pannel complete with connections etc,as required.

S/F Electic shock treatment chart size 24x18" in main pannel room on the existing wall etc as required.in/c carriage of material with in all leads and lifts.

S/F shock C.T.coil of rating 100/5 Amps.(YOKINS) In the existing pannel etc as required.in/c carriage of material with in all leads and lifts

S/F of Rubber mate 1 x 2 mtrs.long 2.5mm thick(JYOTI) in the front main pannel etc as required.in/c carriage of material with in all leads and lifts.

Supplying and drawing Lan cable,1000Mbps speed,Unshielded Cat 6, D-Link make,Twisted pair(UTP) soild copper conductor protected with PVC. Sheath in the existing surface/recessed Steel/PVC conduit as required.

Providing and fixing ADSL Modem Netgear R6350 AC 1750 Smart Wi Fi Router (Black) for net cabling of computer on the existing wall including connections etc,as required.

Supplying and fixing 24 port fast Ethernet Switch D-Link make, 10/100Mbps .DES1024D Unmanaged switchas required

Providing and fixing Patch cable each 2 mtrs.long D-Link make for net cabling of of computer in the existing RJ-45 connector including connections etc,as required.

S/Fcomputer board comprising 3 no.5 Amps switch(modular) and 3 no. 5 Amps socket outlet(modular) and 1 no. 12 Modular switch board with cover plate and 1 no. computer Jack with shutter including connections etc. as required complete in all respects(Make:- Legrand (Myrius), L&T (Oris),Anchor(Roma plus)

Supplying and fixing surface LED 12 watt Round down lighter with high efficacy .Housing made of extruded aluminium with high translucent HET diffuser and it should be compatible with specifications i.e.Power factor >0.9,Harmonic distortion <10% & efficacy >100 Lumen per watts,CRI >80 ,6500 K suitable for input voltage 220-240 Volts,50 Hz,IP rating 20,Surge rating up to 2 KV,Dia 140mm complete with connections etc,as required. Wipro Iris Slim Surface mounted LD-80-101-XXX-60-SM (TIsva,Philips or its equivalent make)

Supplying and fixing of surface mounting LED 36 watts metal square down Light for soft diffuser Lighting cool white and it should be compatible with specification i.e Power factor >0.9, Harmonic distortion < 10% & efficacy> 100 Lumen per watts, CRI > 80, 6500K suitable for input voltage 220-240 volts 5-0 HZ IP rating 20 Surge rating upto 3 KV, diamensions 595X565x80 mm complete with connections etc. as required (Wipro Cat No.CRCO10S038HP57GL1/Tisva/ Philips make or its equivalent),

Supplying and fixing LED Tube fixture 30 watts surface pendent mounting extruded aluminium coated body and it should be compatible with specification i.e Power factor >0.9, Harmonic distortion < 10% & efficacy> 100 Lumen per watts, CRI > 80, 5700 K suitable for input voltage 220-240 volts 50 HZ IP rating 20 Surge rating upto 3 KV, diamensions 1195x295mm complete with all accessories connections, testing and commissioning etc. as required (Wipro cat no. CRCO13S038HP57G1 Auro / Philips/Tisva make ),

Supplying and fixing LED Tube fixture20 watts surface mounting extruded aluminium coated body and it should be compatible with specification i.e 4000 Lumen output,80, 6500 K,length 4 feet Beam angle120 degree suitable for input voltage130-270 volts 50 HZ, Surge rating upto 3 KV, complete with all accessories connections, testing and commissioning etc. as required (Wipro Trim Neo LL20-281-XX-65AL1/Philips/ Tisva make ),

Supplying and fixing LED Lamp 9 watts ,825 Lumens 240 volts AC.supply 50 Hz in the existing batten holder,pendent holder,wall bracket & bulk head fitting etc, as required.(Philips Ace Saver HSN CODE 85395000/Tisva/Panasonic make)

Supplying and fixing Pendent Light LED.9 watts 3000K,240V,50Hz,0.8p.f size 272x170x170 mm.blue and metal commercial code 33389 Philips make 12NC code 919215850196/Wipro/K-Lite or its equivalent make complete with connections etc,as required.

Supplying and fixing of Bed light adjustable head LED 4 watts,230lm Philips make Model No.915004354001 Cat NO.56240/31 star wall/single spot complete with connections etc,as required(Philips/Decon or its equivalent tmake)

Supplying and fixing Fancy wall bracket Philips make Model Corel LED48029 HSN Code 94051020,sleek and modern design,premium material and finish CCT, 6000/3000K,10W,500lm including making connections, testing etc. as required.(Decon,Tisva make)

Supplying and fixing LED Tube fixture20 watts surface mounting extruded aluminium coated body and it should be compatible with specification i.e 4000 Lumen output,80, 6500 K,length 4 feet Beam angle120 degree suitable for input voltage130-270 volts 50 HZ, Surge rating upto 3 KV, complete with all accessories connections, testing and commissioning etc. as required (Wipro Trim Neo LL20-221-XX-65NE3/Philips/ Tisva make ),

Providing and fixing LED streetLight 25 watts CCT5700K ,CRI>80,Surge rating 5kv, IP 66 Dimensions A-39.9 B-12.05 C-8.5, input voltage140V-270v,50Hz,A.C.Supply with M.S.bracket 62 mm.dia withpowder coated aluminium housing on the existing pole including connections complete in all respects and best satisfaction of Engineer -in-charge at site (Wipro Skyline + LR06-311-XX-57-XX/Philips/Tisva make)

Providing and fixing LED Step light 3 watts with aluminium housing,high durability and IP 65 Protection and it should be compatible with specifications i.e.Power factor >0.9,Harmonic distortion <10% & efficacy >100 Lumen per watts,CRI >80 ,6500 K suitable for input voltage 220-240 Volts,50 HZ,Surge rating up to 3 KV and diamensions 58x114.8 mm.on the 4 module box complete with all accessories,connections,testing and commissioning etc,as required. (Panasonic code No.ASE010034/Tisva/Philips/Jaquor make)

Supplying and fixing LED Batten 10 watts Mirror Light and it should be compatible with specifications i.e power factor>0.9.Harmonic distortion<10%& efficacy>100, lumen per watts,CRI>80, CCT 6500K suitable for input voltage 220-240 volts,50Hz,IP rating20,surge rating 3.0kv, and length 59.5 cm complete with connections etc. as required ( Wipro Trim Neo LL-20-111-XXX-65NE3/Tisva /Philips make)

Supplying and fixing of 1.5 ton Split type (Inverter type) 4 star Air conditioner hot and Cold with intelligence heating LCD operated, Advance Filter, E Saver mode, Quit mode, dual display / auto clean Anti Bacteria filter jet cool ON/OFF timer sleep mode compressor cordless remote alongwith voltage stablizer (EM4150) 150V to 285V complete in all respects comprising to ISI with latest amendment suitable to operate on 150-270 volts +/- 10% A.C. supply operating ambient temperature range -7oC to 52oC, compressure type high EER rotary BLDC Refergrqant R4109, filter quadra filter protection with sleek mode capable to perform the function of cooling dehumidification Air circulation, ventilation and fitting in the size of nominal cooling capacity complete with drain pipe 20mm dia approximately 3 Mrs. Long, 2 Nos copper pipe with insulator for inlet and outlet approximately 3 mtrs. Long and M.S. power coated frame/stand for erection of outdoor unit of split type A.C. including carriage of material within all leads and lifts. Make: Voltas (Model SAC184VZS Floral(R32))/Blue star/O-General/Daikin.as approved by the Engineer-in-charge.

Supplying and fixing of sub main wiring with 10 sq.mm.weather proof twin core aluminium conductor cable on the G.I.bearer wire etc,as required..(.Polycab,KEI,Havells,Finolex)

harsh electronic electrical