Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹4.8 L
EMD Value
₹9,514
Closing Date
14 Sept 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DIRECTOR TMC
Office of Engineering services, Second Floor, Khanolkar Shodhika , ACTREC Kharghar, Node, Navi Mumbai - 410210
Construction of Toilet Facility in the ground floor of Service Block of Proton Therapy Centre
2022_TMC_709392_1
Construction of Toilet Facility in the ground floo
Open Tender
Civil Works
Item Rate
60 days
ACTREC-Kharghar
As per tender document
2 documents required · 2 mandatory
₹0
₹9,514
Yes
ACTREC, KHARGHAR
12 Dec 2022
30 Aug 2022
15 Sept 2022
30 Aug 2022
14 Sept 2022
30 Aug 2022
30 Aug 2022 - 14 Sept 2022
6 Sept 2022
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge
Removing existing any thickness paver blocks & refixing the same with necessary sand cement mortar etc with proper line & level as directed by Engg-incharge.
Demolishing Block work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material out of ACTREC as per direction of Engineer-in-charge.
PLASTER BREAKING: Labour charges only for removing existing metal/ damaged / cracked / loosened cement / neeru /rough casts and faced plaster or tile work with back coat at all floors and levels including leaning the surfaces clear of all loose concrete/mortar foreign materials, carting away the debris out of hospital premises including scaffolding raking concrete surfaces etc. complete with quantities to be executed as and when required and as directed by the Engineer- In-Charge.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:3 (1 cement :3 coarse sand)
PLAIN CEMENT CONCRETE:(PCC) Providing and laying in position cement concrete of specified grade : 1:2:4 excluding the cost of centering and shuttering - All work up to plinth level
Brick work with common burnt clay machine moulded perforated modular bricks of class designation 12.5 conforming to IS : 2222 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand)
Plastering 20mm (1:4)
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
Providing and laying water-proofing treatment for sunk slabs of toilets and wherever necessary at all the levels with brick / stone aggregates (brick bat coba), with layer of 20 mm thick cement mortar 1:3 (1 part cement : 3 part coarse sand) mixed with water proofing compound of BASF, SUNANDA, FOSROC or approved make and as specified by the manufacturer, laying brick bats of required size in 100mm layers and providing cement mortar in between such that brick bat is impregnating in to the base mortar bed with gap of 12 mm all around according to slope, level and curing the same, the gaps around brick bats filled with cement mortar 1:3 (1 part cement : 3 part coarse sand) mixed with waterproofing compound, 20-30 mm layer above brick bats and finishing top with neat cement @ 2.75 Kg/Sq.M. screeding and curing etc. in line, level and plumb / slope, complete. (Note : The above rates shall be inclusive of Providing and mixing of waterproofing compound as per manufacturer's specifications and as decided by the Engineer incharge)
Providing and laying Vitrified tiles Matt/Antiskid finish of in floor in Size of 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
Providing and laying vitrified DADO tiles of in different sizes ranging from 500mm to 800mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
Providing and fixing 18mm Granite as door and window frame
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
Providing and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, including tower bolt, SS grab handle,good quality aldrops and all necessary fittings complete as per direction of Engineer-in-charge.
Providing & fixing in position aluminium openable Sqm 2014 window shutter with frame fully glazed /aluminium grills with using 5.5mm thick glass sheet of approved make and quality plain / frusted / bajari glass of approved make Triveni / Shri Vallabh /J / A/ G/ pilkinten fixed with aluminium beeding channels with two way rubber gasket / PVC lining to ensure water tightness and Nos rattling for aluminium grill fixing with F channel beeding using satin finish aNosdized 15 micron jindaL sections for shutters and frame of required size and section including using aluminium / S.S. hinges of required size of Archies make, tower bolt of required size of Archies make ,C type alum handle for shutter of Archies make and other necessary hardware as per requirement etc. complete all as per specified and directed by Engineer in charge.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 20 mm nominal dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes
P.V.C. PIPES:Providing, laying, jointing, fitting, testing heavy quality P.V.C. pipes of Prince, Supreme etc. make & of required dia including all fittings required as per site requirement & laying the same at any floor levels including scaffolding all jointing materials & clamping in wooden blocks if required etc. complete as directed & specified by Engineer-In-Charge. - 50mm
P.V.C. PIPES:Providing, laying, jointing, fitting, testing heavy quality P.V.C. pipes of Prince, Supreme etc. make & of required dia including all fittings required as per site requirement & laying the same at any floor levels including scaffolding all jointing materials & clamping in wooden blocks if required etc. complete as directed & specified by Engineer-In-Charge. - 75mm
P.V.C. PIPES:Providing, laying, jointing, fitting, testing heavy quality P.V.C. pipes of Prince, Supreme etc. make & of required dia including all fittings required as per site requirement & laying the same at any floor levels including scaffolding all jointing materials & clamping in wooden blocks if required etc. complete as directed & specified by Engineer-In-Charge. - 110mm
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
WASH BASIN: Providing and fixing white vitreous china counter wash basin including making all connections but excluding the cost of fittings white colour angle back wash basin of size 630 X 450 mm
E.W.C.:Providing and fixing white vitreous type water closet (European type W.C. pan) with white solid plastic seat and lid, level white P.V.C. flushing cistern with capacity as mentioned below,including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. It should include 'P' or 'S' trap as per approved make with left or right vent in position including fixing it on chair brakcet or wall bracket. With necessary C.P. brass screws & plugs etc. Make : Hindware/Parry ware/cera Wall mounted EWC Universal with 5 to 7 Ltrs Cistern - white colour
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter including cutting on wall and making good all complete.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
Providing & fixing 75mm dia PVC nahani trap as per the instruction of engineer incharge.
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
Providing and fixing C.P. brass long body Pillar cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
Providing and fixing Fancy Angle Stop Cock including all fittings required to fix it as per the instruction of Engineer incharge.
Providing and fixing brass TWO WAY bib cock of approved quality :20 mm nominal bore
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.Mirror
TOWEL ROD: Providing & fixing approved C.P. brass towel rods of size 600mm x 20mm heavy duty with a pair of C.P. brass brackets wall flanges etc. fixed to wall with C.P. screwed on the raw plugs etc. complete as and when required and as directed by the Engineer-In-Charge.
Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :150 mm dia. R.C.C. pipe
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation and foot rests to be paid separately) including 12mm thick cement plaster at the external surface : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.
Providing and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putti of average thickness of 1 mm or 2 mm of approved thickness, brand and manufacture, over the plastered wall surface to prepare the surface even and smooth ready for painting purpose etc complete ( Rate inclusive of Scaffolding Matetrial, Labour Charges) Etc.
Providing & Applying two coats of primer & thereafter two or more coats of paint. Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade as per the instruction of Engineer incharge.
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two coats of synthetic enamel paint all complete.
ELECTRICAL WORKS
SITC of LED tubelight 22W , 4feet
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
1 or 2 Module (75mmX75mm)
3 Module (100mmX75mm)
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 A switch
3 pin 5/6 A socket outlet
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire including conduicts , bends , and all fixing accessories
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire including conduicts , bends , and all fixing accessories
SITC of exhaust fan 300mm metal body
RAJSHREE CONSTRUCTION CONSORTIUM
Bombay Construction
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .