Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹51.0 LAccepted-AOC D 16 OF HQ ADG P CHENNAI PLOT NO 97 SANTOSH NAGAR BALAJI NAGAR NEAR CURRENT OFFICE MEDCHAL MALKAJGIRI TELANGANA 500087 | MEDCHAL MALKAJGIRI | TELANGANA | 500087 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹52.7 L+₹34,680.82 (0.66%)Rejected-Finance SECUNDERABAD | WARANGAL | TELANGANA | 506350 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹54.2 L+₹1.8 L (3.47%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹57.2 L+₹4.8 L (9.19%)Rejected-Finance | L4 | Rejected-Finance Other than L1 |
Tender Value
₹58.4 L
EMD Value
₹1.1 L
Closing Date
23 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (ARMY) SECUNDERABAD
Commander Works Engineers Mudfort, MES Office Complex Secunderabad-500 003
SPL REPAIRS TO BLOCK NO P 368 (12 X QTRS) OR MD ACCN KOWKOOR AREA OF 1 TRG BN 1 EME CENTRE UNDER GE(NORTH) SECUNDERABAD
2023_MES_633458_1
84578
Open Tender
Civil Works
Item Rate
180 days
Secunderabad
As per NIT
7 documents required · 7 mandatory
₹1,000
GE (North) Secunderabad
₹1.1 L
Yes
29 Feb 2024
19 Dec 2023
30 Jan 2024
19 Dec 2023
23 Jan 2024
9 Jan 2024
Amount
Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed.
Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius in half brick thick walls built in cement mortar 1:6 complete all as specified and as directed
Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed
Taking down of old bituminous tarfelt or any other type of roof treatment from roof/ concrete surfaces removal to distance exceeding 250 metres and not exceeding 500 metres from the site and cleaning of the roof surface with wire brush to make it free from dust, dirt etc complete all as specified and as directed
Demolition of cement concrete of any description and in any position not otherwise specifically provided in roof padding concrete etc complete incl removal of demolished material to a distance as specified.
M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate with 2% by weight of cement or as per manufacturer's instructions water proofing as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamferred on edges and formwork etc all as specified and directed. Note: Water proofing compound will be measured and paid separately under relevant item in this schedule
Material and labour for rendering 10mm thick on roof surfaces in cement mortar 1:4 duly mixing with water proofing compound at the rate of 3% by weight of cement and finished even and smooth complete all as specified and as directed Note: Water proofing compound will be measured and paid separately under relevant item in this schedule
Material and labour for application of one coat of water based bitumen emulsion primer at the rate of 0.3 litres per square metre after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP based polymeric membrane of weight 3.5 Kilogram per square metre and minimum 3 mm thick reinforced with polyester non wove fabric (weight not less than 150 grams per square metre) as per IS 3384 on primed surface by forced application over roof surfaces with the over laps of 10 centimetres APP, membrane on roof slab all as per manufacturer's instructions and zonal specification etc complete all as specified and as directed.
Supply only water proofing compound of ISI marked complete all as specified and as directed.
M&L for making the grooves to 'V' section in existing parapet walls/columns over RCC roofs, cleaning out and tacked the polymeric membrane in to the grooves and sealed solidly with a hot mixture of bitumen and clean dry sand in the ratio of 1:1 by weight etc complete all as specified and directed.
Demolition of lime concrete in sunken floor incl removal of filling etc complete incl removal of demolished material to a distance as specified.
Material and labour for rendering 10 mm thick on fair face of brickwork or concrete surfaces of sunken floors duly mixed with water proofing compound as per manufacturer's instructions in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed Note : Water proofing compound shall be measured and paid separately under relevant items in this schedule.
Material and labour for application of one coat of water based bitumen emulsion primer at the rate of 0.3 litre per SQM after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP polymeric membrane of weight 3 kilogram per SQM and minimum 3mm thick reinforced with polyster non oven fabric (weight not less than 150 gm/SQM) over that a coat of blown bitumen of 85 / 25 at the rate of 1.2 kilogram per SQM over that providing a sand layer of 25mm thick thick in sunken floors complete all as specified and as directed.
M&L for plain cement concrete, Type E2 (1:5:10) mix (Using 40 mm graded stone aggregates) for filling in sunken floor and mass concrete complete all as specified and as directed.
Cutting holes into or through cement concrete slabs, chajjas, etc reinforced or otherwise superficial area n exc 100 sq cm all as specified as directed.
Taking down cement plaster of any description and thickness on brick walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed
Material and labour for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed
M&L for rendering in two coats (10 + 5 mm) 10mm thick in CM 1:6 for first coat and 5mm thick in CM1:4,for second coat on fair faces of brick work or concrete surfaces only second coat mixed with integral water proofing compound ISI Marked @ 2% by the weight of cement and finishing the surface even and fair complete all as specified and directed Note - WPC shall be measured and paid separately
M&L for removal of loose and disintegrated concrete of RCC structural members viz slab, beam, column and lintel etc by low impact hammer including removal of debris outside MD land. Cleaning the surface by high pressure water jet or by air blast and exposed reinforcement bars with wire brush and apply two coats of anti-rust protective chemical at suitable intervals all as per manufacturer's instructions to resist further deteoration of reinforcement bars , including use and waste form work and providing welded wire mesh size 100 x 100 mm of wire 3,and using spry gun pressure guniting in CM 1:3, 30mm thick finishing the guiniting surfaces in cement mortar 1:3, 10mm including using water proofing compound 2% by weight of cement and finishing even and smooth without using extra cement to match the existing surface, and unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works complete all as specified and as directed.
M & L for rendering 10 mm thick on concrete surfaces such as ceiling or soffits of chhajas etc; in CM 1:3 finished even and smooth without using extra cement all as specified
M & L for preparing newly plasterd wall surfaces of walls and applying two coats of distemper oil emulsion over 3 mm thick wall care putty and a coat of primer etc complete all as specified and as directed.
M&L for complete removal of existing treatment on wall surfaces and applying two coats of oil bound distemper over a coat of primer over a coat of 3mm thick birla care wall putty etc all as specified and as directed.
M & L for preparing newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.
M & L for preparing the old plastered or unplastered decorated surfaces of walls and applying two coat of white wash all as specified and as directed.
M & L for preparing newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.
M & L for preparing old plastered ceiling surfaces and applying two coats of white wash complete all as specified and as directed.
M&L for preparation of new plastered surfaces on walls, chajjas,filling of hair line cracks with white cement and applying two coats of apex ultima weather proof paint over a coat of apex ultima primer including preparation of surfaces etc all as specified and as directed.
Material and labour for complete removal of the existing surfaces of walls/bands/slabs up to any height and applying two coats of weather proof paint of any colour (ACE Paint) over a coat of smooth external putty finish complete all as specified and as directed
M&L 75 mm thick PCC 1:3:6, type C1 (using 20mm graded stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction
M&L fo filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as complete all as specified and as directed
M&L for PCC 1:2:4 type B1 (using 20mm graded aggregate) in copings, kerbs, channels, and back filling Hollow portion for chowkhats water through and the like including weathering, slightly rounded or chamfered angles and throating as directed chamfered necessary for work
Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.
Material and labour for Non skid coloured ceramic tiles of size exceeding .0.06 square metre but not exceeding 0.11 square metre of 7 to 8mm thick in floor set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including cement screed bed of cement mortar 1:6 of 15 mm thick complete all as specified and as directed.
Material and labour for glazed ceramic coloured wall tiles of approved colour of size 350x 250x 7/ 450x300x7 mm thick on vertical surfaces as in dado/wall set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and as directed
Material and labour for non-skid ceramic coloured tiles of size exceeding 0.11 sqm but not exceeding 0.18 sqm of 7 to 8 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed
Material and labour for non-skid ceramic coloured tiles of size exceeding 0.11 sqm but not exceeding 0.18 sqm of 7 to 8 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match laid over and including 10 mm thick screed in cement mortar 1:4 as in skirting / raisers complete all as specified and as directed
M&L for machine cut kota stone slab 20-25 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 6 for laying floor finishes complete.
M&L 20-25 mm thick machine cut Polished kota stone as in skirting / riser of staircase laying down and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over backing coat of 10mm thick in CM 1:4 complete all as specified and as directed.
Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified.
Drilling holes of suitable size for passing tubes of any description into or through RCC cooking platform slab with stone or brick wall etc. and the like of thickness not more than 250 mm by electric drilling machine and making good complete.
Material and labour for 20 mm thick granite tiles (of any size) machine cut, jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone duly grinding and polishing laid over and including 15mm thick screed bed of 1:6 in steps, jambs, pillars, window cills, cooking platforms and like complete all as specified and as directed
Demolition of RCC water tank ,chajja of any description and in any position not otherwise specifically provided rainforced (rainforcement of cut as required to facilasite demolition etc) complete all as specifed and directed.
M&L for RCC M25 using 20MM graded granite/tap stone aggregate as in Lintle band including form work etc complete.
Diasmantling wrought iron or mild steel work of any description not otherwise provided for.
S&F framed work such as ladders gates,grills, gratings,hook and Pintle higes for large steel gates ,railing etc including round headed screws or welding seams including bending or turning up mitred angles etc as required etc, with ends of bars shouldered and/or riveted, or forged into spiles; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; gates, railings,rollers etc and similar work conforming to Fe 290 or Gde-E165 and complete all as specifed and directed
Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 Sqms each complete all as specified and as directed
Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed
Taking down shutter of any description exc 1Sqm and n.exc 2 Sqm each complete
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified
Supply and fix Solid PVC door frame of size 50 x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, all as specified and shown in Section 8 of MES Schedule Part-II 2010 complete all as specified and as directed
Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawings given in Section 8 of MES Schedule Part-II 2010 as applicable complete all as specified and as directed
Supply and fix steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and ave width of aperture 1.4mm shall be used for fly proofing . 4mm thick plain sheet glass to be used for glazing of glazed shutters including 10mm powder coated square saftey grills, locking arrangement and all necessery accessories etc, completed all as specified Make NCL Alltech
S & F PVC solid ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, mitre cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube the two vatted profiles are to be reinforced with 19 x 19mm MS squre tube the 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc all as per specified and directed (Make SINTEX or epuivalent seetings in RAJSHRI , NANDI make as approved by accepting officer) complete all as specified and as directed
S&F Pressed steel frames of size 105x47mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate ,etc complete all as specified as directed.
S&F Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate ,etc complete all as specified as directed.
S&F Galvanised mild steel woire cloth 0.56mm niminal dia of wire abd average width of aperature 1.00mm allas specified and directed
Cutting holes in brick wall built in cement mortor for inserting hold fast and making good the disturbed portion in cement mortor 1:3 depth of embeded portion exc half brick & N.exc one brick.
S & F 35 mm thick factory made second class hardwood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated. complete all as directed and specified.
S & F 35 mm 2nd class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24(a) etc completed all as specified and directed.
M&L for preparation of new surfaces of steel, of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
M & L preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint on steel surfaces over 10 cm width or girth.
M & L applying new wood surface two coats of synthetic enamel paint over a coat of prink primer on wood or wood based material over 10 cm width or girth including preparation of new wood surface
S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.
S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
Supply and fix butt hinges of 100mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and as directed
S&F 300 Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified
S&F for Mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete
Supply and fix in repairs 2nd class hard wood plain small fittings such as brackets of any type , latch and hinge blocks, shaped door and window stopes and the like , including all necessary labours, articales not exc 200cum each complete all as specified and as directed
S&F in repair aluminium powder coated (fancy type) tubular curtain rod and bracket 25mm dia complete all as specified and as directed.
Dismnatling Boarding , any discreption , fixed in any position with nails complete all as specified and directed
M&L in repairs 18mm thick Plywood grade BWR type BB , fixed with screws to frame work , fixed with svrews to timber frame work all as specified and directed as in repairs.
M&L in repairs 12 mm thick Plywood grade BWR type BB , fixed with screws to frame work , fixed with svrews to timber frame work all as specified and directed as in repairs.
M&L Decorative laminate 0.9mm thick Type I of texture surface finish , colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction complete all as specified and as directed.
M&L in repairs MDF board, 18/19 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed.
M&L in repairs MDF board, 12 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed.
S & F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised 40mm width of flap fixed with screws as in repairs
Dismantling water tanks n. exc 500 litres and removing to store recovery from the contractor as schedule of credit, all as specified and directed.
S&F rotational moulded polyethyiene water storage tanks (cylindrical vertical with closed top) of 500 liters including tank Nipple suitable for water tank (mininmum weight 15 mm-38gms/20mm-45gms/25mm-65gms capcacity complete 25mm dia bore all as specified .
S & F in repairs 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 20mm-210 gms.
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed.
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed.
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25mm complete all as specified and directed.
Cutting and grooving of wall for fixing of CPVC pipe lines and after fixing of CPVC pipe line and making good of all cutting surfaces etc complete all as specified and directed.
S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions ,sockets ,Threaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed.
S&F Tubes, ‘medium grade’ galvanised, 25 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
S&F Tubes, ‘medium grade’ galvanised, 20 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
S&F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 25 mm bore complete all as specified and directed.
S&F for 20mm gun meteal,globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed complete all as directed.
Cutting holes into or through brick wall built in cement mortar of superficial area n exc 150 Sq.cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed
S&F in repairs CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed.
Supply and fixed in repairs stop valve / angle cock fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron pipe.
S&F in repairs chromium plated shower roses 125mm size with or without swivel joint including fixing to steel pipe or union etc.complete all as specified and directed.
S&F PVC connections, 15mm size with PTMT nuts of length 450mm
Supply & fix in repairs Vitreous China Squatting pan, "Orissa" pattern, size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete complete including making good to floor.
S & F in repairs PVC 10 ltrs capacity symphonic action type low level flushing cistern including flush pipe, cantilever brackets incluiding taking down existing cistern etc complete fixed in repairs complete .
S&F in repairs vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittings with long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed.
S&F in repair stainles steel sink, bowl size 600mm x 450mm x 225mm without drainage board , 1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers and wastes including bedding in cement morter to dwarf wall or including fixing CI cantilever bracket, connecting union to pipe etc., complete all as specified and directed. Make : Nirali, Bule star ISI marked.
S&F in repair stainless steel plate rack, wall mounted of size 750mm X 900mm X 200 mm of approved quality made of 1.00mm thick stainless steel for kitchen with necessary fixing material complete all as directed by Engr-in-charge.
S & F in repairs Towel rail 600mm long of brass chromium plated fixed with and including CP brass screws and wooden/plastic cleats. (Minimum weight 190 gms)
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches including taking down of old pipes.
Supply & fixing PVC (SWR) junction single (single T ) equal or unequal 110mm dia with access doors complete
S&F 110mm dia vent cowl PVC (SWR)
S & F 110mm bore PVC (SWR) plain bends with access door of any radius complete all as specified and directed.
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches including taking down of old pipes.
Supply & fixing PVC (SWR) junction single (single T ) equal or unequal5mm dia with access doors complete
S & F 75mm bore PVC (SWR) plain bends with access door.
S&F in repair PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing of stainless steel grating in ground shape etc complete all as specified and as directed.
Demolition of concrete in ground floors (un re-inforced) and paving n.exc. 15 cm thickness (below or above ground level) and including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.
M&L for 75 mm thick plain cement concrete 1:4:8 mix,type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed.
M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade etc complete all as specified and as directed.
Spreading and levelling of Sand/ grit cushioning below interlocking tiles.
M&L rubber moulded chequered cement concrete tile of size 300 x 300 x 20mm or 20CM x 20CM x 25 mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes. Conforming to IS. (Tiles shall not be add at site. Items shall be got tested at NTH at contractors cost) complete all as specified and directed.
Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.
Material and labour for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade HRFR conforming to IS - 694 multistranded CONCEALED with new sunk type pressed steel terminal boxes suitable for MODULAR switches including fixing/grouting sunken/ surface as per site requirement covered with suitable modular white cover plate for suitable size for mounting of MODULAR switches, regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade HRFR conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces complete all as specified and as directed for the following :-
(a) One light/ Bell point controlled by one, one way switch 5 amps, SP
(b) One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator
(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .
(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.
(e) One light point controlled by two, two way switch 5 amps, single pole
Description as per item No. 2 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor
Supply and fix MODULAR switch 1 way 6 A, 1 Module capacity 230 volts complete all as specified and as directed.
Supply and fix MODULAR socket 5 pin 6 amps 2 MODULE, 230 Volts complete all as specified and directed.
Supply and fix MODULAR socket 6 pin 6/16 amps 2 MODULE, 230 Volts complete all as specified and as directed.
Supply and fix Switch MODULAR 1 WAY 16 amps, 230 Volts complete all as specified and as directed.
Supply and fix electronic ceiling fan regulator MODULAR 5 stepped type heavy duty suitable to work on 230 volts complete all as specified and as directed.
Supply and fix Modular bell push of 6 Amps SP, 230 volts AC complete all as specified and directed.
Supply and fix Switch MODULAR two way 6 amps, 230 volts, 1 module complete all as specified and directed.
S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks all as specified.
S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified.
S & F ding dong Bell AC,230 Volts,single pole
S & F wall mounted Indus plus LED Batten,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1x20 w watts, 230 volts, bipin holders, DIFFUSED TYPE connector block, internally pre wired etc with necessary mounting arrangements including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting all as directed
Supply anf fix LED security light luminaire fitting of 1x35 watts with deep drawn housing including all accessories with suitable 40 mm dia GI pipe 0.60 Mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as sepcified and as directed.
S&F Wall mounted type LED light fitting 1x10 Watt complete with all accessories incl of new 3 core multi stranded copper conductor of size 23/0.193 from ceiling rose to light fitting complete all as specified and directed.
S & F wall mounted Indus plus LED Batten,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1x10 w watts, 230 volts, bipin holders, DIFFUSED TYPE connector block, internally pre wired etc with necessary mounting arrangements including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting all as directed by Engineer-in-charge.Make:Havells cat No-LHEWEBP51N1W010 or equilent in Philips/CG/C&S
S & F in replacement of sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with magnetic locking system complete all as specified .
S & F MCB SPN 40 Amps 240 volts for fixing on MCB DB's all as specified.
S & F MCB SP 6 to 32 Amps 240 volts for fixing on MCB DB's all as specified.
M & L Submain wiring with 2 runs of single core 6 sqmm HRFR PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit concealed and conduit accessories of medium grade not not less than 25 mm dia including one run of single core 6 sqmm HRFR PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain wiring complete all as specified and as directed.
S & F in replacement of Environmental fridendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED wattage of 1x10 watt luminaire comprising of high brightness LEDs of Make Havells RUGBYNEONFT10WLED860SSYMTOPC or equivalent to Bajaj/Wipro.
Material and labour in replacement of earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanised iron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plate of SSR Pt - I connected to earthing test point and including testing on completion complete all as specified and as directed. NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate in pit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia TMT bars @ 100mm centre to centre both ways, galvanised iron funnel with watering pipe, wire mesh, complete.
S&F in replacement of sheet steel MS enclosure earth plug socket 2 pin 20 amps with MCB 20 amps complete, all as specified and as directed by Engr-in-charge
Supply and fixing in replacement of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed Note : Old unsv ceiling fan & exhaust fan will be deposited to MES store yard.
Supply and fix in replacement of exhaust fan complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm all as specified and directed. Note : Old unsv ceiling fan & exhaust fan will be deposited to MES store yard.
Dismantling/taking down old/UNSV distribution panel and supply, fixing and testing of out door 3 phase LT distribution panel board factory, made out of 3.15mm thick CRCA sheet CPRI approved of size not less than 600x450x200mm duly powder coated wall mounted/semi grouted in wall with locking arrangement single door type, compartmentalised and provision for tapping incomming & outgoing electric connections with suitable size of copper nut bolts & lugs, glands, one MCCB will be pre fitted/mounted on proper din rails and with earth link at top/bottom detachable plates and suitable for accomdating the following items :- (a) Copper busbar strips for TPN of 200 amps rating (min length of 250mm) and connected with MCCB by spreader terminals. ( set of 4 strips). (b) Phase indicating lamp LED type - one set of 3. (c) MCCB 4 pole, 63 Amps rating 16 KA breaking capacity, 415 volts - 01 No.
Supply & fix in replacement of storage type Water heater (Geyser) 5 STAR of Cap 25 Ltrs working on 230 volts AC supply with in and out going water connection pipe (Hot & Cold) fixing arrangement with nut bolts and making good the disturbed surface all as specified and as directed. Make - Hevells Cat No GHWAMGTWH025/Racold/V-Guard. Note : Old unsv geyser will be deposited to MES store yard.
Taking down carefully by unscrewing from boards / outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc for reuse or carrying to the store.
SAI RUPA CONSTRUCTIONS
PAVAN ENTERPRISES
M/s GM Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .