Underground cable laying work of new HT/LT line, conversion of overhead HT/LT line into underground cable lines and other associated works in Ayodhya city (Ayodhya NPP) of EDC Ayodhya MVVNL under IPDS on turnkey

Construction of new 33KV UG Line & Conversion of 33KV O/H existing Line into UG (in Double Circuit)

Supply of 33 KV XLPE Insulated armoured Al. Cable of size 3x300 mm2

Supply & erection of Heat Shrinkable Jointing Kit Outdoor for 33 KV 3x300 sq. mm XLPE Cable

Supply & erection of Heat Shrinkable Jointing Straight Through Kit for 33 KV 3x300 sq. mm XLPE Cable

Supply & laying of 160 mm dia. PE 80 PN 6 HDPE pipe by Horizontal drilling by HDD method as per site condition, for underground piping (trenchless) as per TS & Road Restoration with permission from competent Authority.

Laying of 33 KV 3x300 Sqmm. XLPE Cable underground through PE 80 PN 6 HDPE Pipe at 1050 mm below the ground surface.(by HDD method) as per TS.

Drilling of Earth & Laying of Cable of sizes 3x300 sq. mm using HDD Method Without using PE 80 PN 6 HDPE Pipe as per TS & Road Restoration with permission from competent Authority.

Digging of Trench by excavation of earth, laying of bricks to cover the cable and filling of sand & earth ramming and dressing properly with complete job for laying 33 KV XLPE cables of sizes 3x300 sq. mm including cost of Bricks, sand, clamps and back filling as per Technical specification with permission from competent Authority.

Supply & laying of 160 mm dia. PE 80 PN 6 HDPE pipe in Trenches

Laying of 3x300 Sq. mm 33 KV XLPE insulated cable underground in trenches through PE 80 PN 6 HDPE as per TS.

Supply and laying of G.I. pipe 6" dia with clamp and nut & bolts

Supply & Erection of 11 Mtr. long Steel Tubulor Pole( 540 SP-52) on Section double pole

Supply & Erection of MS Galvanised Angle Iron 65x65x6mm, 4300 mm long bracing with 4 clamps

Supply & Erection of MS Galvanised Top Channel 125x65mm, 3200 mm (10.7kg/mt) with clamp, bolts, nuts and washers

Supply & Erection of Stone Pad (300x300x75mm)

Supply & Erection of 33 KV Danger Board(250x200 mm) with Clamp and Nuts & Bolts.

Supply & Erection of G.I. Barbed Wire.

Supply & Erection of Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG GI wire etc. together with fixing arrangement as per TS.

Grouting of 11 mtr STP Pole of depth 1.8 meter with 300 mm Muffing. As per TS

Supply & Erection of 33 KV Stay Complete (GI Stay Rod 20x1800 mm, 10 Kg. Stay Wire 7/8, Guy Insulator (Type-C) Stay Clamps, Anchor Plate, Bolt, Nuts & Washers with concrete grouting)

Supply & Erection of Alluminium paint

Supply & Erection of Red Oxide paints.

Supply and Placing of Pre-cast Concrete Manhole Chambers of size 900mm x 900mm Internal Dimension x 800mm Height & 100mm wall thickness (Heavy Duty) with Concrete Cover of 100mm thickness in the specified locations in the trench.

Supply & Erection of Cable warning tape

Supply & Erection of Cable route marker

Dismantling of Old Existing line and carriage of dismentalled Pole/Conductor/all other material upto utility Store as per site condition.

Supply & Erection of Single core PVC Insulated Aluminium cable 300 sqmm for jumpering

Supply & Erection of Aluminum lugs -300 Sq.mm.

Supply & Erection of ACSR Dog Conductor

Supply & Erection of 33 KV Porcelain Pin Insulator as per MVVNL Spec

Supply & Erection of 33 KV G. I. Pin 10 KN with Nuts- Bolts & Washers.

Supply & Erection of PG (Parallel Groove) Clamps for ACSR Dog

Supply & Erection of E- Bracket for 33 KV line

Supply & Erection of Alluminium binding wire - 6 SWG ( Suitable for ACSR DOG Conductor) for 33 KV Pin Insulator

Supply & Erection of 33 KV Porcelain Lightning Arrestors

Construction of new 11KV UG Line & Conversion of 11KV O/H existing Line into UG (in Double Circuit)

Supply of 11 kV XLPE insulated armoured Al. cable of size 3Cx185 sq.mm

Supply & erection of Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable

Supply & erection of Heat Shrinkable Jointing Kit Straight through for 11 KV 3x185 sq. mm XLPE Cable

Supply & laying of 160 mm dia. PE 80 PN 6 HDPE pipe by Horizontal drilling by HDD method as per site condition, for underground piping (trenchless) as per TS & Road Restoration with permission from competent Authority.

Laying of 11 KV 3C x 185 sq.mm XLPE Cable underground through PE 80 PN 6 HDPE Pipe at 950 mm below the ground surface. (by HDD method) as per TS.

Drilling of earth & Laying of Cable of sizes 3x185 sq. mm using HDD Method Without using PE 80 PN 6 HDPE Pipe as per TS & Road Restoration with permission from competent Authority.

Digging of Trench by excavation of earth, laying of bricks to cover the cable and filling of sand & earth ramming and dressing properly with complete job for laying 11 KV XLPE cables of sizes 3Cx185 sq. mm including cost of Bricks, sand, clamps and back filling as per Technical specification with permission from competent Authority.

Supply & laying of 160 mm dia. PE 80 PN 6 HDPE pipe in Trenches

Laying of 3Cx185 sq.mm 11 KV XLPE insulated cable underground in trenches through PE 80 PN 6 HDPE Pipe as per TS.

Supply and laying of G.I. pipe 6" dia with height of 3 meter with clamps, Nut and Bolts.

Supply & Erection of 11 Mtr. long. Steel Tubular Poles.(540 Sp-52)

Supply & Erection of M.S Galvanised Angle 65x65x6 mm, 2250 mm long bracing complete with 4 clamps

Supply & Erection of M.S.Galvanised Top channel 100x50x6 mm., 2240 mm long with clamp, nuts & bolts.

Supply & Erection of Stone Pad (300x300x75mm).

Supply & Erection of 11 KV SMC Danger Board (250x200mm) with Clamps and Bolts.

Supply & Erection of G.I. Barbed wire.

Supply & Erection of Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.

Grouting of 11 mtr STP Pole of depth 1.8 meter with 300 mm Muffing As per TS

Supply & Erection of 11 KV Stay Complete (GI Stay Rod 16x1800 mm, 8.5 Kg. Stay Wire 7/10, Guy Insulator, Stay Clamps, Anchor Plate, Bolt, Nuts & Washers with concrete grouting)

Supply & Erection of Alluminium paint.

Supply & Erection of Red Oxide paints .

Supply & Erection of Alluminium binding wire - 6 SWG( Suitable for ACSR DOG Conductor) for 11 KV Pin Insulator

Supply and Placing of Pre-cast Concrete Manhole Chambers of size 900mm x 900mm Internal Dimension x 800mm Height & 100mm wall thickness (Heavy Duty) with Concrete Cover of 100mm thickness in the specified locations in the trench.

Supply & Erection of Cable warning tape

Supply & Erection of Cable route marker

Dismantling of Old Existing line and carriage of dismentalled Pole/Conductor/all other material upto utility Store as per site condition.

Supply & Erection of Single core PVC Insulated Aluminium cable 185 sqmm for jumpering

Supply & Erection of Aluminum lugs -185 Sq.mm.

Supply & Erection of 11 KV AB Switch Set with complete set of Assembly

Supply & Erection of 9 kV, 5 kA, Porcelain Housing Lightning Arrestors with Disconnector for DT as per TS.

Installation of New 250 KVA /400 KVA Distribution Transformer

Supply & Erection of Earthing complete for T/F Neutral, T/F Body and Lightening Arrestor (Chemical pipe earthing) with GI Flat earthing strip as per Technical specification..

Supply & Erection of 11 Meter long Steel Tubular Pole.(540 SP-52)

Supply & Erection of M.S. Galvanised Top channel 100x50mm, 2240 mm with clamp, nuts & bolts.

Supply & Erection of Stone Pad(300x330x75 mm)

Supply & Erection of 11 KV Porcelain Pin Insulators(5KN), pin with N&B

Supply & Erection of 11 KV Danger Board(250x200mm) with Clamp and Nuts & Bolts

Supply & Erection of MS Galvanised Channel (For AB Switch & Fuse set)

Supply & Erection of Holding clamps for top channel of AB Switch & fuse set etc. with bolts & nuts.

Supply & Erection of 11KV AB Switch with fixing clamps.

Supply & Erection of 11KV Fuse Set (Drop out) with clamps.

Supply & Erection of G.I. Barbed Wire.

Concreting of supports with plinth as per MVVNL Spec

Supply & Erection of Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG GI wire etc. together with fixing arrangement as per TS.

Supply & Erection of 11 KV Stay Complete (GI Stay Rod 16x1800 mm, 8.5 Kg. Stay Wire 7/10, Guy Insulator,Stay Clamps, Anchor Plate, Bolt, Nuts & Washers with concrete grouting)

Supply & Erection of 9 kV, 5 kA, Porcelain Housing Lightning Arrestors with Disconnector for DT as per TS.

Supply & Erection of LT Aluminium XLPE insulated Cable of size 1Cx50 Sq.mm.

Supply & Erection of Alluminium paint

Supply & Erection of Red Oxide Paint

Supply & Erection of 11/0.44 kV 250KVA Transformer (Level-II) as per Technical Specification.

Supply & Erection of 11/0.44 kV 400 KVA Transformer (Level-II) as per Technical Specification.

Supply & Erection of LT Aluminium XLPE Cable 1Cx400 Sq.mm.

Supply & Erection of LT Aluminium XLPE Cable 1Cx240 Sq.mm

Plinth of Distribution T/F with RCC Top of Size 2x2x1.6Mtr. Including 2 Nos. MS Galvanised Channel.

Supply & Erection of Al. crimping lugs 400 sq.mm.

Supply & Erection of Al. crimping lugs 240 sq.mm.

Supply & Erection of Al. crimping lugs 50 sq.mm.

Supply & Erection of FRP Fencing with gate for DT S/S as per specification.

Supply & Erection of 3 Phase 4 Wire LT CT Metering Cubicle alongwith set of 4 CTs 600/5A for metering of 250 kV DT with fixing arrrangment as per TS.

Supply & Erection of 3 Phase 4 Wire LT CT Metering Cubicle alongwith set of 4 CTs 600/5A for metering of 400 kV DT with fixing arrrangment as per TS.

Supply & Erection of Electronics LT Trivector Meter (DLMS)

Supply of Sundry items including Nuts, Bolts and Washers Etc.

Augmentation of pole/plinth mounted 11/0.4 KV Distribution Sub Station

Supply & Erection of 11/0.4 KV Transformer Cu wound 250 KVA (New)

Supply & Erection of 11/0.4 KV Transformer Cu Wound 400 KVA (New)

LT Aluminium XLPE Cable 1X400 Sq.mm.

LT Aluminium XLPE Cable 1X50 Sq.mm.

LT Aluminium XLPE Cable 3.5X240/120 Sq.mm.

Al. crimping lugs 400 sq.mm.

Al. crimping lugs 240 sq.mm.

Al. crimping lugs 120 sq.mm.

Al. crimping lugs 50 sq.mm.

11KV TPMO

11KV Fuse Set

MS Channel 100x50x6 mm 2240mm long (For TPMO & Fuse set)

Holding clamps for top channel, TPMO & Fuse set etc. with bolts & nuts

Plinth of Distribution T/F with RCC Top of Size 2x2x1.6Mtr. Including 2 Nos. MS Galvanised Channel.

Supply & Erection of 3 Phase 4 Wire LT CT Metering Cubicle alongwith set of 4 CTs 600/5A for metering of 250 kV DT with fixing arrrangment as per TS.

Supply & Erection of Electronics LT Trivector Meter (DLMS)

Painting of DP & Fencing

Supply & Erection of Earthing complete for T/F Neutral, T/F Body and Lightening Arrestor (Chemical pipe earthing) with GI Flat earthing strip as per Technical specification.

Supply of Sundry items including Nuts, Bolts and Washers Etc.

Dismentaling of Existing transformer and cartage to Stores

Construction of new LT UG Line & Conversion of LT O/H existing Line to UG (in Double Circuit upto DPBox)

Supply of 3 ½ Core ,240 sqmm. Armoured Al conductor XLPE insulated 1.1 kV grade armoured Power cable as per Technical specification

Supply of 3 ½ Core ,150 sqmm. Armoured Al conductor XLPE insulated 1.1 kV grade armoured Power cable as per Technical specification.

Supply of 3 ½ Core ,25 sqmm. Armoured Al conductor XLPE insulated 1.1 kV grade armoured Power cable as per Technical specification.

Supply & laying of LT Aluminium XLPE Cable 1Cx630 Sq.mm.

Supply & laying of LT Aluminium XLPE Cable 1Cx400 Sq.mm.

Supply & laying of PE 80 PN 6 HDPE Pipe 160 mm Suitable for 3.5 C x 240 sqmm Cable by HDD Method along with cable pulling and back filling of pit as per Technical specification with permission from competent Authority.

Supply & laying of PE 80 PN 6 HDPE Pipe 160 mm Suitable for 3.5 C x 240 sqmm Cable by Manual Method along with cable pulling and back filling of trench as per Technical specification with permission from competent Authority.

Supply & laying of PE 80 PN 6 HDPE Pipe 110 mm Suitable for 3.5 C x 150 sqmm Cable HDD Method along with cable pulling and back filling of pit as per Technical specification with permission from competent Authority.

Supply & laying of PE 80 PN 6 HDPE Pipe 110 mm Suitable for 3.5 C x 150 sqmm Cable Manual Method along with cable pulling and back filling of trench as per Technical specification with permission from competent Authority.

Supply & laying of PE 80 PN 6 HDPE Pipe 50 mm Suitable for 3.5 C x 25 sqmm Cable with HDD Method along with cable pulling and back filling of pit as per Technical specification with permission from competent Authority.

Supply & laying of PE 80 PN 6 HDPE Pipe 50 mm Suitable for 3.5 C x 25 sqmm Cable Manual Method along with cable pulling and back filling of trench as per Technical specification with permission from competent Authority.

Digging of Trench by excavation of earth, laying of bricks to cover the cable and filling of sand & earth ramming and dressing properly with complete job for laying of LT XLPE insulated cable and back filling as per Technical specification with permission from competent Authority.

Dismantling of Old Existing LT line and carriage of dismentalled Pole/Conductor/all other material upto utility Store as per site condition.

Supply & Erection of Cable end termination using Al. Lugs of suitable size along with all accessories

Supply & Erection of Cable gland of suitable size along with all accessories

Supply, Erection, Testing, & Commissioning of of 7 – Distribution feeder pillar Type-B, TP & N, 3 phase 415 v , 400 Amps incoming rating type suitable for outdoor installation , in accordance with Technical Specification Incomer-1 set of 250A TP MCCB with Spreader & Extended handle Outgoing- 5 Set of 63 Amp. TP MCCB Outgoing 1 Set of 25 Amp. TP MCCB (with provision of 3Ph. meter installation inside the panel). The Cubicle should be weather proof, dust proof, vermin Proof and enclosure protection shall be IP-55 as per IS 2147-1962 and IS: 8623.The panels/switches boards shall be fabricated out of 14-SWG CRCA sheet steel and provided with 16 SWG hinged doors including suitable foundation.

Supply, Erection, Testing, & Commissioning of Lockable 3-ph 415 V , Distribution Service Piller (Type-C) for LT 100 Amp MCCB Incoming, 4 nos 32 Amp TP MCB outgoing12 Nos 16 Amp SP MCB outgoing Rating Feeder Type Distribution Service Piller suitable for Outdoor Installation. The Cubicle should be weather proof, dust proof, vermin Proof and enclosure protection shall be IP-55 as per IS 2147-1962 and IS: 8623. The panels/switches boards shall be fabricated out of 14-SWG CRCA sheet steel and provided with 16 SWG hinged doors including suitable foundation.

Supply & Erection of Outdoor type LT Disribution Boards with a rupturing capacity of 50KA at 415V or as called for individual items (CPRI Approved manufacturer), openable in front and back suitable for 3 plase, 4 wire, 50Hz AC supply and an ambient temperature of 45 deg. C. The Cubicle should be weather proof, dust proof, vermin Proof and enclosure protection shall be IP-55 as per IS 2147-1962 and IS: 8623. The panels/switches boards shall be fabricated out of 14-SWG CRCA sheet steel and provided with 16 SWG hinged doors including suitable foundation. MAIN LT PANEL AT SUB STATION (Type A) Incomer- 1 Set of 800 Amp. TP MCCB with Spreader & Extended handleMetering on Incomer - 1 Set of Digital Ammeter with ASS - 1 Set of Digital Voltmeter with VSS - 1 Set of LED type Phase Indicating Light (22.5 mm.) with Control MCBsOutgoing- 6 Set of 250 Amp. TP MCCB with Spreader & Extended handle ( 5 Nos. + 1 No. for capacitor panel) - 2 Set of 100 Amp. TP MCCB with Spreader & Extended handle

Supply & erection of Plinth for Outdoor type LT Disribution Sevice Pillar (C-type)

Supply & erection of Plinth for Outdoor type LT Disribution Boards (A-type)and Distribution feeder pillar Box ( B Type)

Supply & Erection of Chemical earthing of Outdoor type LT Disribution Boards (A-type) and Distribution feeder pillar Box ( B Type)(80 mm dia,3 M long) using GI Strip

Supply & Erection of Earthing of Distribution Service Pillar Box by MS earthing rod of 20x2500 mm. and 6 SWG GI wire etc. together with fixing arrangement as per TS. (C-Type)

RCC TRENCH

Supply & Erection of material for Construction of RCC Cable Trench 850 X 800 X 150 mm with RCC Cover

Metering

Supply & Erection of 1-Ph Consumer meter

Supply & Erection of 3-Ph Consumer meter

Supply & Erection of 3 Phase TVM Meter (CT Connected)

Supply & laying of of Single Phase two wire Al, LT armoured PVC cable (2x10 Sq.mm.) incl. Clamp & Assessories with laying as per TS & Road Restoration with permission from competent Authority.

Supply & laying of Three Phase Four wire Al LT armoured PVC cable (4x25 Sq.mm.) for Street Lighting purpose incl. Clamp & Assessories with laying as per TS & Road Restoration with permission from competent Authority.

Supply & laying of Three Phase Four wire Al LT armoured PVC cable (4x10 Sq.mm.) incl. Clamp & Assessories with laying as per TS & Road Restoration with permission from competent Authority.

Supply & Laying of PE 80 PN 6 HDPE Pipe 50 mm.

Supply PVC pipe Heavy Gauge 3" dia. Incl. all necessaory Assesories for LT Cosumers with laying & Restoration as per TS.

Supply PVC pipe Heavy Gauge 2" dia. Incl. all necessaory Assesories for LT Cosumers with laying & Restorationas per TS.

Supply and errection of GI pipe 40/50 mm Incl. all necessaory Assesories for LT Cosumers and Type-C boxes with laying & Restoration as per TS.

RMU 33 KV

Supply of 33 KV SF6 type extensible 3 way Ring Main Unit SCADA Compatible complete including associated cables and accessories and its installation as per TS.

Supply & Erection of Heat Shrinkable termination jointing kit indoor for 33 KV 3x300 Sq. mm. XLPE Cable

Foundation of Structure for RMU for Cable Entry Etc.(Concrete 1:3:6)

Supply & Erection of Earthing to equipment with Bentonite, earthing strip Etc.

Supply & Erection of Sundries such as Nuts, Bolts, Washers etc.

RMU 11 KV

Supply of 11 KV SF6 type extensible 3 way Ring Main Unit SCADA Compatible complete including associated cables and accessories and its installation as per TS

Supply & Erection of Heat Shrinkable termination jointing kit indoor for 11 kV 3x185 Sq. mm. XLPE Cable

Foundation of Structure for RMU for Cable Entry Etc.(Concrete 1:3:6)

Supply & Erection of Earthing to equipment with Bentonite, earthing strip Etc.

Supply & Erection of Sundries such as Nuts, Bolts, Washers etc.

R & M of Existing DT Substations

Reconditioning of DT (Arresting of oil leakages, change of damaged gaskets, and Reparing of Plinth etc.)

Painting of DT & Structure including cost of all material

Supply & Erection of 9 kV, 5 KA porcelain housing Lightning Arrestor with Disconnector for DT as per TS

Supply & Erection of 11KV Fuse Set

Supply & Erection of 11KV TPMO

Supply & Erection of MS Galvanised Channel 100x50x6 mm 2240 mm long (Dropper for fuse set and TPMO)

Supply & Erection of Holding clamps for fuse set with bolts & nuts

R & M of Existing Power Substations

Supply & Erection Terminal Gantry

Supply & Erection Main Bus Bar complete with Structure

Supply & Erection 33 KV 1250 A -3P Indoor VCB I/C

Supply & Erection 33 KV 1250 A -3P Indoor VCB O/G

Supply & Erection 33 KV 1250 A -3P Indoor VCB Bus Coupler

Supply & Erection of 33 KV Porcelain Lightning Arrestors

Supply & Erection of 33 KV Line Isolator, Structure & Foundation

Supply & Erection 33 KV 1250 A Outdoor VCB

Supply & Erection of Plinth & Foundation for VCB

Supply & Erection of 33 KV CT 200/100/1A

Supply & Erection of 33kV/110 V PT

Supply & Erection of Control Panel 33 KV Single T/F

Supply & Erection of Control Panel 33 KV Double T/F

Painting of MS auxilliary structure and Associated Renovation work

Supply & Erection of 24V battery and Charger with cabinet

Supply & Erection of 11 KV VCB I/C CTR 600/300/5A 350 MVA

Supply & Erection of 11 KV VCB O/G CTR 200/100/5A 350 MVA

Supply & Erection of 11 KV B/C 350 MVA

Supply & Erection of 33/11 SS Auxillary Power & Circuit Panel as per MVVNL Design (DCDB)

Supply & Erection of 33 KV Secondary Source Auto Change Over Arrangement (2 Nos 33 KV Line Isolator , 1 No 33 KV VCB with T/F Control panel & CT , Support Gantry Structure And Fencing ) in all respect.

Supply & Erection of 33/0.4 KV 400 KVA Transformer

RENOVATION & EXTENSION OF CONROL ROOM

Supply & Erection of material for Extension of Existing Control Room for installation of new VCBs and Equipments as per the Approved Drawing of MVVNL

R&M of Substation (Civil Work)-

Supply & Erection of material for Construction of Store Room, office sitting area with toilet (Area - 100 sq mtr)

Supply & Erection of material for Construction officer's office sitting area Area - 60 sq mtr)

Supply & Erection of material for Floor Repair Work (100 Sq mtr)

Supply & Erection of material for Tiles Interlocking Work (100 Sq mtr)

Agumentation of Power Transformer 5 MVA to 10 MVA

Supply and Erection of 33/11 KV 10 MVA Power Transformer as per the MVVNL Specification

Supply & Erection of 33 KV CT 200/100/1A

Chemical Earthing with GI Strip complete for Power Transformer

Supply & Erection of 33 KV XLPE Insulated armoured Al. Cable of size 3x300 mm2

Supply & erection of Heat Shrinkable Jointing Kit Outdoor for 33 KV 3x300 sq. mm XLPE Cable

Supply & Erection of 11 kV XLPE insulated armoured Al. cable of size 3Cx185 sq.mm

Supply & erection of Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable

Strengthning of Transformer plinth as per MVVNL Specification

KEI Industries Limited

NCC LIMITED

NCC LIMITED

LARSEN AND TOUBRO LIMITED