Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.6 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹19.7 L+₹4.9 L (33.4%)Rejected-Finance NIVADA TIVAYA ROAD TIVYA MUST BUS STOP VILLAGE KHATAULI SAHARANPUR UP 247001 | SAHARANPUR | SAHARANPUR | UP | 247001 | L2 | Rejected-Finance Not Lowest Tenderer | |
| 3 | L3₹21.3 L+₹6.5 L (44.1%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Tenderer |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Delhi Cantt 10
Garrison Engineer South Delhi Cantt 110010
PETTY REPAIRS OF B/R ITEMS AND MISC B/R WORK AND SEWAGE CLEANING/MAINT OF SEWAGE SYSTEM OF 274 T/CAMP AT KHANPUR UNDER AGE B/R-I (S) OF GE (SOUTH) DELHI CANTT-10
2022_MES_533256_1
GE/DS-37/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE South Delhi Cantt
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
GE South Delhi Cantt
₹60,000
Yes
20 Sept 2022
24 Jun 2022
28 Jul 2022
24 Jun 2022
26 Jul 2022
8 Jul 2022
Amount
Attending complaint for petty repair to leaking water in bib tap, pillar tap, stop cock, angle valve, flushing cistern, WHB, Sink, wall mixer etc. of any description any size by changing the washers(s)/jumper(s) etc, by adjusting/replacing the washer(s) and adjustment of lever required for making the flushing cistern functional, by tighting the leaking waste pipe of WHB/Sink and providing 'M' seal to stop leakage as required. Removal of air lock/blockage of water in GI water tubing and cleaning the pipe or fittings etc. (excluding replacement of defective items) complete all as specified and directed by Engr-in-Charge.
Note:- 1. The contractor shall make all arrangement for attending the different types of complaints area on day to day basis. Any major item required to be replaced with new one, to make the system functional shall be measured and paid for separately as "M&L or S&F" under respective item of this schedule. Old retrieved item(s) as considered in 'Schedule of Credit' shall become property of the contractor. Contractor has to provide minimum one plumber with helper including all necessary T&P on all working days from 9AM to 5PM. Additional workers can be engaged if nature of work required to be completed within fix time frame as desired by the GE. Rate shall be quoted accordingly against these items, keeping in mind above said provisions. 2. Contractor shall provide minimum one plumber with helper including all necessary T&P on all working days from 9AM to 5 PM .Additional workers can be engaged if nature of work required to be completed with in fixed time as desired by GE . Rate shall be quoted accordingly . Keeping in mind above said provisions. 3. Where material provided shall be paid as "S&F underrespective item of Sch. 'A' the payment of complaint under this item shall not be paid. 4. Based on complaint received from users. Concerned JEs shall deploy the tradesmen in same day through Job slip (complaint slip) and the contractor shall ensure that the complaint are to be attended and rectified in same day and complain slip shall be got signed by users with date. Non compliance (not attending) the complaint in same day a panel recover of Rs.100/Per complaint shall be made from contractors due (claims). 5. The contractor shall provide job slip serially machine numbered, attendance register and complaint registered, and the rate quoted by the tender shall deemed to be included for these provision. 6. These document may be asked to produce at the time of payment of RAR/Bill.
S&F in repairs chromium plated bib tap long body with flange fixed in 15mm bore of pipe, cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and directed by Engr-in-Charge.
S&F in repairs bib tap ISI marked cast copper alloy with crutch or butterly handle screwed down high pressure and screwed for iron pipe of 15mm bore complete all as specified and directed by Engr-in-Charge.
S&F in repairs bib tap standard 15 mm dia of PTMT any colour for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and directed by Engr-in-Charge.
S&F in repairs Chromium plated Pillar tap 15 mm bore cast copper alloy with capstan heads chromium plated screwed down high pressure screwed in iron pipe complete all as specified and directed by Engr-in-Charge.
S&F in repairs stop cock ISI marked cast copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore complete all as specified and directed by Engr-in-Charge.
S&F in repairs PVC connection 15 mm dia 45 cm long with 2 Nos PVC check nuts with washer complete all as specified and directed by Engr-in-Charge.
S&F in repairs chromium plated Stop valve/angle valves cast copper alloy, screwed down both, high pressure, with crutch or butterfly handle, screwed both end fixed, 15mm internal bore complete all as specified and directed by Engr-in-Charge.
S&F in repairs PTMT overhead shower with arm any colourt any size, including fixing to steel pipe or union for 15mm bore pipe complete all as specified and directed by Engr-in-Charge.
S&F in repairs brass jumper washer, brass head, face and spindle for bib cock/pillar cock/stop cock 15 mm bore any type complete all as specified and directed by Engr-in-Charge.
S&F in repairs 15mm dia stop valve concealed type cast copper alloy, screwed down, high pressure chromium plated with long shank including making good dismantled portion complete all as specified and directed by Engr-in-Charge.
S&F in repairs 32 mm to 40mm dia PVC waste pipe for WHB & sink, 60 cm long with union complete all as specified and directed by Engr-in-Charge.
S&F in repairs waste fittings brass chromium plated 32 mm dia for wash hand basin complete all as specified and directed by Engr-in-Charge.
S&F in repairs waste fittings brass chromium plated 40 mm to 50 mm dia for stainless steel sink complete all as specified and directed by Engr-in-Charge.
S&F in repairs gun metal globe or gate valve 'ISI Marked' with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 15 mm complete all as specified and directed by Engr-in-Charge.
S&F in repairs gun metal globe or gate valve 'ISI' Marked, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 20 mm complete all as specified and directed by Engr-in-Charge.
S&F in repairs small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 15 mm bore pipe (ISI marked) complete all as specified and directed by Engr-in-Charge.
S&F in repairs small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 20 mm bore pipe (ISI marked) complete all as specified and directed by Engr-in-Charge.
S&F in repairs small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 50 mm bore pipe (ISI marked) complete all as specified and directed by Engr-in-Charge.
S&F in repairs CI bracket of exiting size, for WHB or Kitchen Sink etc including cutting, necessary fitments for pinning in brackets complete all as specified and directed by Engr-in-Charge.
S&F in repairs PVC syphone with handle complete for low level flushing cistern complete all as specified and directed by Engr-in-Charge.
S&F in repairs PVC handle heavy duty, for low level flushing cistern complete all as specified and directed by Engr-in-Charge.
S&F in repairs 10 ltrs capacity PVC Low level flushing cistern including PVC syphon and float valve with float, PVC long bend for out let connection of cistern with WC complete fixing and connecting bend with WC complete all as specified and directed by Engr-in-Charge.
S&F in repairs PVC polyplast float valve for cistern tank complete all as specified and directed by Engr-in-Charge.
S&F in repairs plastic water closet seat cover (for Anglo Indian) white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodised hinging device complete all as specified and directed by Engr-in-Charge.
S&F in repairs CP Health faucet for Europeon type WC with 1.5m long pipe as per approved sample complete all as specified and directed by Engr-in-Charge.
S&F in repairs CP grating 127 mm dia with/without hole round, fixed on floor / nahani trap, fixed with cement mortar(1:3) complete all as specified and directed by Engr-in-Charge.
S&F in repairs chromium plated Jet for WC with 1.00 Mtr long PVC pipe including necessary GI fitting as required like toe, nipple etc complete all as specified and directed by Engr-in-Charge.
S&F in repairs soap dish Chromium plated brass fancy type complete all as specified and directed by Engr-in-Charge.
S&F in repairs, Toilet paper holder Chromium plated brass fancy type complete all as specified and as directed by Engr-in-Charge.
S&F in repairs , towel ring chromium plated brass fancy type complete all as specified and as directed by Engr-in-Charge.
S&F in repairs, CP towel rail 60Cm long complete all as specified and directed by Engr-in-Charge.
S&F in repairs glass Shelf Corner with frame Chromium plated brass fancy type complete all as specified and as directed by Engr-in-Charge.
S&F in repairs HDPE PVC lid (cover) for 1000 to 2000 Ltrs capacity PVC tank complete all as specified and directed by Engr-in-Charge.
S&F in repairs HDPE PVC lid (cover) for 500 Ltrs capacity PVC tank complete all as specified and directed by Engr-in-Charge.
Attending complaint for petty repair to easing of Doors/Window/Cup Board shutters by tightening of hinges/handles/Al-drop bolt/tower bolt/knobs, hasp and stapple etc of any size/any number of panels for easy closing/opening or changing the position of hinges, adjustments of tower bolts,sliding bolts, replacement of looking mirror etc complete (excluding replacement of defective item) complete all as specified and directed by Engr-in-Charge.
Note:- 1. The contractor shall make all arrangement for attending the different types of complaints area on day to day basis. Any major item required to be replaced with new one, to make the system functional shall be measured and paid for separately as "M&L or S&F" under respective item of this schedule. Old retrieved item(s) as considered in 'Schedule of Credit' shall become property of the contractor. Contractor has to provide minimum one carpenter with helper including all necessary T&P on all working days from 9AM to 5PM. Additional workers can be engaged if nature of work required to be completed within fix time frame as desired by the GE. Rate shall be quoted accordingly against these items, keeping in mind above said provisions. 2. Contractor shall provide minimum one carpenter with helper including all necessary T & P on all working days from 9AM to 5 PM .Additional workers can be engaged if nature of work required to be completed with in fixed time as desired by GE . Rate shall be quoted accordingly . Keeping in mind above said provisions. 3. Where material provided shall be paid as "S&F underrespective item of Sch. 'A' the payment of complaint under this item shall not be paid. 4. Based on complaint received from users. Concerned JEs shall deploy the tradesmen in same day through Job slip (complaint slip) and the contractor shall ensure that the complaint are to be attended and rectified in same day and complain slip shall be got signed by users with date. Non compliance (not attending) the complaint in same day a panel recover of Rs.100/Per complaint shall be made from contractors due (claims). 5. The contractor shall provide job slip serially machine numbered, attendance register and complaint registered, and the rate quoted by the tender shall deemed to be included for these provision. 6. These document may be asked to produce at the time of payment of RAR/Bill.
S&F in repairs 9mm Plywood, grade BWR, type BB,nexc.1.50 Sqm fixed with nail/screw to timber frame work complete all as specified and directed by Engr-in-Charge.
S&F in repairs magic eye for panelled/flush shutter 35mm thick complete all as specified and directed by Engr-in-Charge.
S&F in repairs CP Peg set of 06 hanging complete all as specified and directed by Engr-in-Charge. Make:- As per sample kept in GE's office.
S&F in repairs sliding door bolts 300 mm long clip type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repairs MS barrel tower bolt, stove enamelled black 200mm long complete all as specified and directed by Engr-in-Charge.
S&F in repairs 100 mm long MS butt hinges 'medium weight' cold rolled welded to steel frame work complete all as specified and directed by Engr-in-Charge.
S&F in repairs steel window handles(right & left) and peg stays etc as per sample complete all as specified and directed by Engr-in-Charge.
S&F in repairs 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge.
S&F in repairs 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge.
S&F in repairs 125 mm mild steel pressed handle oval type, stove enamelled black complete all as specified and directed by Engr-in-Charge.
Taking up or down GI steel water tubing 15mm bore and connections including cleaning complete all as specified and directed by Engr-in-Charge.
Taking up or down GI steel water tubing 20mm bore and connections including cleaning complete all as specified and directed by Engr-in-Charge.
Taking up or down GI steel water tubing 50mm bore and connections including cleaning complete all as specified and directed by Engr-in-Charge.
S&F galvanised steel water tubing 15mm bore 'medium grade' with and including all fittings and fixed to walls or laid in floors complete all as specified and directed by Engr-in-Charge.
S&F galvanised steel water tubing 20mm bore 'medium grade' with and including all fittings and fixed to walls or laid in floors complete all as specified and directed by Engr-in-Charge.
S&F galvanised steel water tubing 50mm bore 'medium grade' with and including all fittings and fixed to walls or laid in floors complete all as specified and directed by Engr-in-Charge.
All as per Srl item No.51 here-in-before but except pipe.
All as per Srl item No.52 here-in-before but except pipe.
All as per Srl item No.53 here-in-before but except pipe.
S&F in repairs stainless steel sink with drainage board of 1 mm thick sheet for kitchen with plug washer, waste pipe, cast iron cantilever brackets connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm fixed in position complete all as specified and directed by Engr-in-Charge.
S&F in repairs sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including fixing cantilever brackets and connecting union to pipe, over all size 495mm x 420mm bowl size 410mm x330mm x160mm complete all as specified and directed by Engr-in-Charge.
S&F in repairss 0.8mm thick stainless steel plate rack overall size (31X36X10 inch) fixed with steel screws complete all as specified and directed by Engr-in-Charge.
S&F in repairs for vitreous china wash hand basin flat back size 550x400 mm size white excluding taps waste chain and plug and porcelain stopper but including brackets and 32 mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32MM X 600 MM long PVC waste pipe complete flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge.
M&L for manual Sealing of traps,WCs (manually) with neat cement paste after removal of water from it, to prevent or make up the leakage including cementing in cement mortar (1:3) from inside and outside both & refixing grating, plasters etc complete all as specified and directed by Engr-in-Charge.
S&F in repairs vitreous china squatting pan (Orissa pattern white) long pan fixed size 580x440mm white with integral footrest with 100 mm bore Cast iron `P' or `S' trap (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge.
S&F in repairss viterous china wash down water closet pan Pedestal pattern (Anglo Indian WC) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and directed by Engr-in-Charge.
Taking down 100 mm bore cast iron pipes including fittings by burning out lead joints etc to facilitate dismantling old serviceable fittings/pipes laid in trenches,floors or fixed to walls all as directed including earth work, demolition of PCC / Brick work complete all as specified and directed by Engr-in-Charge.
All as per Srl item No. 64 above but 75 mm bore of pipe.
S&F 100 mm bore cast iron sand soil waste or vent pipes (ISI Marked), in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors or fixed to walls all as directed including making good to match with existing surfaces complete all as specified and directed by Engr-in-Charge.
All as per Srl item No. 66 above but 75 mm bore of pipe.
S&F in repairs, 100mm bore cast iron branch pieces (ISI Marked), single (equal or unequal) ordinary of inverted spigot or socket type complete all as specified and directed by Engr-in-Charge.
All as per Srl item No.68 above but 75 mm bore of pipe.
S&F in repairs, 100 mm bore cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engr-in-Charge.
All as per Srl item No.70 above but 75 mm bore of pipe.
S&F in repairs 100 mm bore CI bends/branch pieces (any radius) for oval access doors complete all as specified and directed by Engr-in-Charge.
All as per Srl item No.72 above but 75 mm bore of pipe.
S&F in repairs, CI floor trap with grating including jointing to waste pipe in run lead, dia of outlet 75 mm including floor around to required depth and burning lead joints etc to facilitate dismantling old CI trap and making good complete all as specified and directed by Engr-in-Charge.
Extra over cast iron pipe and fitting if lead joint are provided in lieu of cement joints complete all as specified and directed by Engr-in-Charge.
All as per Srl item No.75 above but 75 mm bore of pipe.
S&F in repairs, MS clamps for CI pipes 100 mm bore made out of 50mm x 5 mm flat and 16 mm dia round bars, including bolts and nuts and securing to wall in PCC (1:2:4) and making good in cement mortar (1:3) complete all as specified and directed by Engr-in-Charge.
Dismantling water tanks exc 250 litre but not exceeding 500 litre and removal from site complete all as specified and directed by Engr-in-Charge.
S&F rotational moulded polyethelene water storage tank capacity 500 litres 'ISI Marked' cylindrical vertical with closed top hoisted and fixed in position complete all as specified and directed by Engr-in-Charge. Make:- Polyplast/Sintex/Rotex.
Taking down rain water pipes (any size or pattern) including all fittings bends etc complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, 110mm bore of pipe complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) bends any radius for 110mm bore of pipe complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster on brick walls, concrete surfaces, raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.
M&L for 15mm thick rendering with redimix plaster (as per manufacturer's instruction) on fair faces of brick work or concrete surfaces finished even and smooth surface without using extra on wall and ceiling of up to four stories bldg. make of ready mix plaster: Birla Aerocon/Ultratech radiplast/ACC acoplast complete all as specified and directed by Engr-in-Charge. Make of ready mix plaster : Birla Aerocon/Ultratech radiplast/ACC acoplast.
M&L for 10 mm thick rendering with redimix plaster (as per manufaturer's instruction) in ceiling on concrete surface finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge. Make of ready mix plaster: Birla Aerocon/Ultratech radiplast/ACC acoplast Notes for Srl No. 84 & 85 :- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech readiplast/ACC Accoplast/Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE) 2. The readymix plaster shall be procured directly from the manufacturer or their authorised dealer. 3 The contractor shall produced original purchase voucher alongwith test certificate of readymix plaster while claiming RAR/ Final Bill. 4. The Engr-in-Charge shall verify the genuiness of these vouchers before endorcing the purchase vouchers.
Demolition of cement concrete in ground floor and paving etc not exc 15 cm thick above or below ground level complete all as specified and directed by Engr-in-Charge.
M&L for PCC (1:2:4) Type B-1 (using 20 mm graded stone aggregate), 40 mm thick as in floors etc finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for PCC (1:3:6) type C-2 (using 40 mm graded aggregate) 75 mm thick as in floor / plinth protection finished even and smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for Preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including a coat of wall care Putty complete all as specified and directed by Engr-in-Charge.
M&L preparing new plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) over a coat of primer of same make including scaffolding for four storey building complete all as specified and directed by Engr-in-Charge.
Disconnecting existing tanks of capacity exc 250 litre but n.exc 500 litre litre setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt etc., from tanks and from mouths of circulating pipes etc. including writing letters Date of cleaning of tank in figures & in block Roman Italic or Indian n.exc 10 cm high with synthetic enamel paint as shade approved by Engr-in-charge complete all as specified and directed by Engr-in-Charge. Note :- After cleaning the date of cleaning shall be written over tank and the rate quoted by the tenderer shall deemed to be included for the same.
Disconnecting existing tanks of capacity exc 500 litre but n.exc 2000 litre setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt etc., from tanks and from mouths of circulating pipes etc. including writing letters Date of cleaning of tank in figures & in block Roman Italic or Indian n.exc 10 cm high with synthetic enamel paint as shade approved by Engr-in-charge complete all as specified and directed by Engr-in-Charge. Note :- After cleaning the date of cleaning shall be written over tank and the rate quoted by the tenderer shall deemed to be included for the same.
Disconnecting existing tanks of capacity exc 2000 litre but n.exc 4000 litre setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt etc., from tanks and from mouths of circulating pipes etc. including writing letters Date of cleaning of tank in figures & in block Roman Italic or Indian n.exc 10 cm high with synthetic enamel paint as shade approved by Engr-in-charge complete all as specified and directed by Engr-in-Charge. Note :- After cleaning the date of cleaning shall be written over tank and the rate quoted by the tenderer shall deemed to be included for the same.
M&L for cutting trees including cutting of trunks and branches and digging out roots from floor or roof and walls making good the dismantled portion in cement mortar (1:3) girth of trees 30 cm, complete all as specified and directed by Engr-in-Charge.
S&F in repairs, 25 mm bore mild steel 0.8mm thick conduit pipe with PVC ribbed lamination of required length for curtain rods including two fixing mild steel powder coated matching colour full round or half round with fixing nuts (bracket holders),& PVC golden finish end knobs(Two noumber for each curtain rod of any length) and PVC gold finish curtain ring @ 3 nos/feet complete all as specified and directed by Engr-in-Charge.
S&F in repairs, aluminium sheeting 0.50 mm thick, fixed to wooden shutters with CP screws including cutting to required size etc complete all as specified and directed by Engr-in-Charge.
S&F in repair mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tracks or galvanised wire staple complete all as specified and directed by Engr-in-Charge.
Hacking out old broken glass of any thickness/size of any description from steel/wooden frame glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed by Engr-in-Charge.
S&F 4mm thick Figured glass, pin head type and glazing with oil putty in sqr n exc 0.5 sqm in each pane etc. complete all as specified and directed by Engr-in-Charge.
S&F in repairs block board grade 2 quality, exterior grade commercial type 18/19 mm thick fixed in repair in copboard shutter & parations including 0.90 mm thick decorative laminate type 1 on one side surface finish of colour and pattern as approved fixed with approved adhesive complete all as specified and directed by Engr-in-Charge.
M&L for prepration of new wood or wood based surface not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.
M&L welding in repairs n.exc 2.5cm in length in any situation and in any position such as hinges and similar articles etc for steel door, gates, window, ventilatiors and grills etc for upto four stoery building complete all as specified and directed by Engr-in-Charge.
Taking down shutter of any description exc 1.00 sqm nexc 2.00 sqm each complete all as specified and directed by Engr-in-Charge.
S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge.
M&L 35mm thick 2nd cl hardwood glazed and skelton shutter open rabated and prepare to receive gauge etc divided into square with plain, chamfered or rounded fixed with cut : mitered beads for receiving gauge etc complete all as specified and directed by Engr-in-Charge.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be coloured with heat mould plain coloured PVC'C channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stills and plain colour PVC sheet for top rail lock and botton rail either side and as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading. And jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.
S&F solid PVC doors & frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm MS square tube of 19 guage s&f in opening as per specification & drg in SSR 2004 Part II complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub base of floors etc. complete all as specified and directed by Engr-in-Charge.
M&L non skid coloured ceramic tiles jointless 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match over and including 15mm thick screed bed in cm 1:6 for laying floor finish complete all as specified and directed by Engr-in-Charge.
Glazed ceramic coloured tiles as per IS-13753, 350mm x 250mm x 7 mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match in vertical surfaces such as skirting /dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10m thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing coat complete all as specified and directed by Engr-in-Charge.
M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 complete all as specified and directed by Engr-in-Charge. Make: Somany/Orient/Kazaria or equivalent
S&F in repairs rotational moulded polythelene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 2000 ltr capacity including taking down old with and incl 25mm brass float valve complete all as specified and directed by Engr-in-Charge.
S&F in repairs rotational moulded polythelene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltr capacity including taking down old with and incl 25mm brass float valve complete all as specified and directed by Engr-in-Charge.
Sewage Works:- M&L for attending day to day complaints of cleaning of all blockages of Nahni traps/floor traps/bottle traps, blockages of WC's, Bath, Toilets, Cook House, Dining Halls, Rain water pipes,open drains, Rain water spouts at roof level, 100 mm dia CI pipes upto 1st manhole/GT in shafts, vertical CI soil/waste pipe stacks, CI Tee/door bends etc & cleaning of drain pipes 150 mm (internal dia) by rodding and manholes upto 3.0 metre in depth and removal of sludge/silt/liquid mud sand (in foul conditions) etc, out of MOD premises (at the location notified by the local Municipal Corporation/Cantt board) complete all as specified and directed by the Engineer-in-Charge, to maintain internal & external sewage system in functional state at all the time by engaging/deploying minimum one safaiwala, daily from 0900 hours to 1700 hours at Complaint cell of the 274 TC Khanpur area of AGE B/R-I (South), with manual/pressure cleaning pump and flexible rods and other necessary equipments (as per rules of public health), including digging the required Nos of pits for depositing sludge and furture capping the pit with 25 cm thick layer of soil, complete all as specified and directed by Engineer-in-Charge. Note:- Proper records (date wise) of complaints received & rectified by the contractor and attendance register of trademen shall be maintained and shall be produced for verification at the time of payment of each RAR/Bill.
Cleaning of manhole by super succer machine of any size but upto 1.5 m depth and removal of sludge silt/liquid/mud/sand/water etc in foul position to out side the MOD land complete all as specified and directed by the Engineer-in-Charge.
All as per item No.118 above but exceeding 1.5m and not exceeding 2.5m in depth.
De-silting of sewer line upto 200mm internal dia with connected manholes of any depth by mechanical device like super sucker machine, high pressure jetting machine/gantry machine. incl taking out debris, installation of adequate number of over pumping system leak proof stanching arrangement of upstream and downstream side of working length, temporary raising main etc for smooth flow of sewage system to avoid flood in the area. Supply of all material, labour, tool & plants temporary power connection with stand by generator set of capacity of at least 62.5 KVA, gas detector for air ventilators etc & provn of safety equipments as per guide lines laid in IS : 11972 (1987)/(international standard), traffic control arrangement and proper lighting at night barricading display of sign boards, insurances of workmen & cleaning of site complete all as specified and directed by Engineer-in-Charge.
All as per item No.120 above but upto 300mm internal dia of sewage lines.
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50 m in depth for manholes & sewage lines and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge.
All as per item No.122 above but depth exceeding 1.50 m and not exceeding 3.00 m.
Demolition & breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 150 mm complete all as specified and directed by Engineer-in-Charge.
Demolition and breaking up drain pipes, 200 mm internal dia (Salt glazed stoneware, AC or reinforced concrete) 100mm (internal dia) set in cement mortar including haunching and bed concrete.
M&L concrete bed to 150 mm bore drain pipes in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregates including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed by Engineer-in-Charge.
All as per item No.126 above but bore of pipe 200 mm.
M&L 150 mm internal dia salt glazed stone ware drain pipes laid in trenches and jointed complete all as specified and directed by Engineer-in-Charge.
M&L for providing reinforced concrete pipes, class NP2 laid and jointed complete with collars 200 mm dia (internal) laid in trenches & jointed etc complete all as specified and directed by Engineer-in-Charge.
Demolition of brick wok built in cement mortor complete all as specified and directed by Engineer-in-Charge.
M&L burnt brick work with sub class 'B' old size bricks,class designation 7.5N, built in cement mortar (1:6) straight or curved on plan exc 6m mean radius complete all as specified and directed by Engineer-in-Charge.
Cutting into existing manholes for connecting new drains of 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No.132 but box of pipe 200mm.
Demolition of cement concrete (reinforced) of any description and any thickness complete all as specified and directed by Engineer-in-Charge.
M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.
M&L for providing cement concrete 1:2:4, type B1, using 20 mm graded stone aggregates as in coping and benching etc including necessary form work complete all as specified and directed by Engineer-in-Charge.
S&F in repairs cast iron Nahani trap with grating including jointing to waste pipe, fixed in cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregate, dia of outlet 75 mm complete all as specified and directed by Engineer-in-Charge.
S&F SFRC manhole cover size 600mm dia x 70mm thick with frame set in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Notes:- (i) Make of SFRC Manhole/drain cover and frame :- (a) M/s PS Concrete. (b) M/s KK Manhole or equivalent as approved by GE” (ii) Contractor will provide manufactuerer test certificate of SFRC cover & frame.
S&F SFRC manhole cover size 750mm x 750mm x 65mm thick with frame set in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame :- (a) M/s PS Concrete. (b) M/s KK Manhole or equivalent as approved by GE” (ii) Contractor will provide manufactuerer test certificate of SFRC cover & frame
S&F steel fibre reinforced (SFRC) Gully trap cover with frames of size 300mm x 300mm x 50mm thick set in cement motar (1:6) complete all as specified. Notes: - (i) Make of SFRC Manhole/drain cover and frame :- (a) M/s PS Concrete. (b) M/s KK Manhole or equivalent as approved by GE” (ii) Contractor will provide manufactuerer test certificate of SFRC cover & frame.
M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in surface channels, drains (forming fair finished channel shall be measured and paid for separately) complete all as specified and as directed by Engineer-in-Charge.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends, etc complete all as specified and as directed by Engineer-in-Charge. Note : Inner girth will be measured only.
Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm complete all as specified and as directed by Engineer-in-Charge.
Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs rotational moulded polythelene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltr capacity including taking down old with and incl 25mm brass float valve complete all as specified and directed by Engr-in-Charge.
Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.
Chaudhary Constructions
kailash chawla
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .