Repair to R.I. Office Building at Ramagiri_Building

Supplying fitting & fixing of G.C.I sheet in roofdrilling holes in wind ties including fixing of ridges valleys wind ties with all T&P etc completeincluding cost of fittings and all materials, labour,with T & P,Cess etc required for the work complete as per direction of Engineer-in-Charge.

Providing HYSD bar reinforcement for R.C.C. work including Straightening,Cutting, bending, binding and tying the grills and placing in proper position as per drawing and design including cost, conveyance and taxes of M.S rods and binding wire with all labour T&P and cess required for the work etc. complete in all respect in all floors (weight of binding wires will not be considered as measurement of M.S rods) as per specification and direction of the Engineer-in-Charge.

Earth work excavation in ordinary soil in road embankment with all leads and lifts including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30 (1’-0”) in depth with all labour, Cess and T&P etc. complete in all respect as per specification and direction of Engineer-In-Charge.

Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, Cess & taxes of all materials & cost of all labour required for the work etc complete as per specification & direction of Engineer-in Charge.

Providing Cement Concrete (1:3:6) with 40mm size clean hand broken granite metal of approved quality from approved quarry includinghoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where neCessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance royality, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, labour of all materials and including hire & running charges of machineries required for the work including supplying & working of pumps and Cess as per the specifiction and direction of Engineer-in- charge.

Providing cement concrete (1:11/2:3) with 12mm size clean crusher broken granite chips aggregate of approved quality from approved quarry including hoisting, lowering & levelling in position to required level in each layer not exceeding 15cm thick including frame work where neCessary ramming using vibrator to proper slope and levelling curing dewatering if neCessary with cost, conveyanceroyalty labour of all materials and including hire and running charges of machinaries T&P required for the work including supplying and working of pumps and Cess as per the specification and direction of Engineer-in-charge.

Fly Ash brick masonary in Cement Mortar (1:6) in foundation/Superstructure using-fly ash-brick of 23cm X 11cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & labour & cess etc required for the work complete in all respect as per the direction of Engineer-in-charge. Foundation

12mm (1/2") thick cement plaster in C.M (1:4) finsihed smooth brick work with neat cement punning watering & curing for seven daysand two coats of bitumen painting over top of walls and below the bearing of roof slab including cost and conveyance of all materials DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, labour with T&P required for the work including Cess with alland royalties etc, complete in all respects in all floors as per direction of Engineer-in-Charge.

6mm thick cement plaster in cement mortar (1:4) to ceilling of roof lintel and chajjas after chipping and chiselling the same and clearing the surface by wire brush finished smooth watering and curing for 7 days including cost,conveyance of all materials and labour with T&P & Cess required for the work withand royality, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, etc complete in all respects in all floors as per direction of Engineer-in-Charge.

Wall painting one coats with plastic emulsion paint of approved quality & shade on old work to give an even shade with brush to interior walls suraface after cleaning the surface including cost of plastic emulsion paint with cost, conveyance andof all materials and labour with T&P required for the work with Cess etc complete as per direction of Engineer-in-charge