Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.8 CrAccepted-Finance | ₹12.8 Cr | L1 | Accepted-Finance Responsive |
| 2 | L2₹13.4 CrAccepted-Finance | ₹13.4 Cr | L2 | Accepted-Finance Responsive |
| 3 | L3₹15.9 CrAccepted-Finance | ₹15.9 Cr | L3 | Accepted-Finance Responsive |
Tender Value
₹11.3 Cr
Closing Date
26 Jul 2021, 4:00 pmClosed
Er Zulfiqar Ali
Executive Engineer Jal Shakti (PHE) Division Qazigund
Design Construction Testing Successful Commissioning of WS Scheme Tengpora Khargund under JJM including maintenance for a period of three years which includes 12 months DLP
2021_PHE_129626_1
13/EE/JSD/Qazigund/2021-22
Open Tender
Civil Works - Water Works
18 days
Chowgam Khargund
Please refer NIT
7 documents required · 7 mandatory
₹15,000
MH 0215
Exempted
Chief Engineer Jal Shakti PHE Deptt Srinagar
24 Aug 2021
6 Jul 2021
27 Jul 2021
6 Jul 2021
26 Jul 2021
6 Jul 2021
6 Jul 2021 - 17 Jul 2021
17 Jul 2021
Amount
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:
All kinds of soil
Ordinary Rock
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
All kinds of soil
Ordinary Rock
Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329 including fitting viz. Tees; Bends & other allied accessories and carriage from source up to road site by mechanical transport complete job.
250 mm dia Ductile Iron Class K - 7 Pipes
200 mm dia Ductile Iron Class K - 7 Pipes
150 mm dia Ductile Iron Class K - 7 Pipes
Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:-
250 mm dia pipes
200 mm dia pipes
150 mm dia pipes
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work):- light-A including carriage by mechanical transport:-
100 mm dia. nominal bore
80 mm dia. nominal bore
65 mm dia. nominal bore
50 mm dia. nominal bore
40 mm dia. nominal bore
25 mm dia. nominal bore
20 mm dia. nominal bore
15mm dia nominal bore
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete:-
15 to 40 mm nominal bore
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).
50 mm dia.
80 mm dia.
100 mm dia.
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:
1:3:6 or richer mix (i/c equivalent design mix)
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with:-
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing and fixing of regulating valves/air valves at various spots for regulation of water supply (complete Job) :- Class-1
250 mm dia Sluice valves
200 mm dia Sluice valves
150 mm dia Sluice valves
100/80/65 mm dia gate valves/Sluice valves
Removal of trees, surface boulders/ clearance of silt by engaging manual labours.
Preparation of subgrade by excavating earth to an average of 22.5 cmdepth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus earth upto 50 meters.
Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 mtr in width as well as 10 sqm on plan) including disposal of excavated earth upto 50 mtr and lift upto 1.50 mtr, as directed by Engineer-In- Charge:-
All kinds of soil :
Ordinary Rock :
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) includingdisposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.
All kinds of soil :
Ordinary Rock :
Extra for every additional lift of 1.5 m or part there of in excavation/banking excavated or stacked material. All kinds of soil.
Extra for levelling & neatly dressing of disposed soil completely as directed byEngineer-in-charge.
Supplying and stacking at site Graded crushed stone aggregate:-
size 90 mm to 45 mm
63mm to 45mm
53mm to 22.4 mm
Supplying and stacking of stone screening/ chipping at site:-
Grade-1
Grade-2
Grade-3
Supply and stacking of stone dust/Moorum at site:-
Grade-1
Grade-2
Grade-3
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill up interstices of coarse aggregate, watering andcompacting to the required density:-
Grade-1
Grade-2
Grade-3
Providing and laying of dry stone solling tightly hand picked on horizontal levels
Providing and laying of dry stone boulder tightly hand picked on horizontal levels
Providing and Hand packing of Quarry stone boulders of required size into the wire crates excluding the cost of wire crates.
Dry random rubble masonry with hard stone (Quarry) in foundation and plinth: With bond stone.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses,string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills,fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement of mix 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stoneaggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete.50 mm thick with 20mm nominal size stone aggregate.
Extra for R.C.C./B.M.C./R.M.C. work above floor V level for each four floors or part thereof.
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above/upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)
Centering and shuttering including strutting, propping etc. and removal of form for:
Foundations, footings, bases of columns etc. for mass concrete.
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
Suspended floors, roofs, landings, balconies and access platforms
Edges of slabs and breaks in floors and walls Under 20 cm wide.
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
Columns, pillars, piers, abutments, posts and struts.
Stairs (excluding landings) except spiral staircases.
Arches, domes, vaults upto 6 m span
Extra for shuttering in circular works (20 % of respective quantity):-
Foundations, footings, bases of columns etc. for mass concrete.
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
Columns, pillars, piers, abutments, posts and struts.
Suspended floors, roofs, landings, balconies and access platforms
Extra for arches, domes, vaults exceeding 6 m span
12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 fine sand).
12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand)
12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 coarse sand)
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm.
Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
Structural steel work in single section fixed with or without connecting plate, including cutting, hoisting, fixing in position & applying a priming coat
Providing and incorporating (during conc.) GP sheet strips water seal 0.63 mm thick at construction joints including jointing of ends so as to form a continous berries
Providing colour coated corrugated G.S sheet roofing inlcuding vertical/curved surface fixed with poilymner coated J/L hooks, bolts and nuts 8 mm dia with bitumen and GI limpet washers or with GI limpet washers filled with white lead complete (upto any pitch in horizontal/vertical of curved surface) excl. the cost of purlins and including cutting to size and shape wherever required
Providing ridge or hips of width 60 cm over all width plain G.S.sheets fixed with polymer coated J or L hooks, bolts & nuts, 8mm dia GI limpet & bitumen washers complete. 0.63mm thick with zinc coating not less than 275 gm/sqm.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class kail wood
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First class kail wood
Providing and fixing panelling or panelling and glazing in panelled or panelledand glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to bemeasured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick. First lass Kail wood
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : . First class kail wood
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick top cover
Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete
Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work sqm
Finishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm)
Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: (Agaria White 16mm thick)
Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing of eves boarding coloured CGI 300 mm vide
Providing and fixing of glass panes 4mm thick with wooden fillets
Providing and laying of filter media effective size of sand varies from 0.45 mm to 0.70 mm having uniformity coefficient between 1.30 to 1.75 and should be dust free from other organic impurities to be obtained from Ganderbal and the size of gravel should varry from 2mm to 40 mm including all carriages complete.
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces
Supply and fixing of lightening conductor complete job
Supply and fixing of level indicator complete job
Providing and fixing of DF CI sluice valves confirming IS 780 read upto date amendments standard make (kirloskar/Vag) meant for pipe gallery in filler beds required to be operated from operating platform height 3.5 m. Hence suitable arrangement for manual operations to be provided the job include providing and fixing and fabrication of MS 6mm thick tail pieces as per site requirement, nuts bolts and seals the sluice valves should be fitted with extension roads, pedestrial etc (Filter beds, inlety and outlet). Complete job 250 mm Dia.
Providing and fixing of 80mm Dia PVC under drainage laterals 8mm thick fabricated out of Korean Foam or Prince make with 9mm perforations as per design in the bed provided at 60 along with PVC TEES and End caps to be grouted in M25 grade cement at ends. the pressure rating 10kg/ cm2
Providing installation testing commissioning of rate of flow metre reliable make from 50 to 150 rating of recording type Mahindra make complete job.
Providing installation testing commissioning of loss of head assembly reliable make from 100 to 500 rating complete job.
Providing installation testing commissioning of double Flanged MS Pipes of 6mm thick. The Job includes cutting welding and fabrication complete job:-
250mm dia.
150mm dia.
100mm dia.
Providing installation testing commissioning of double Flanged DI sluice valves complete job.
300 dia. (Wash out CF)
Providing installation testing commissioning of double Flanged MS Pipes for back wash 250 mm Dia.
Providing fixing air blower (Everest makeor Kay make) capable for providing compression @ 12.6 cum per minute @ 0.35kg/SM suitable 3 phase induction motor with auxilary pipe system upto Filter beds filling pressure guage nozels cement concrete block base plate air check valve non return valve cement concrete block in M20 grade foundation bolts base frame fabricated out of 100mm MS channels the job also includes PRV Pipe and pipe fittings staters aqnd PVC 19/18 copper wire complete job and other electrical controlling devices fitted on pannell board complete job.
Providing installation testing commissioning of kirloskar make mono block pumping equipment capable of lifting of 50 cum per hour for a height of 20 mtr. With 3 phase appropriate rating power induction mover with stater assembly suction and delivery fittings upto back wash. the job includes all electrical operating devices fitted in pannell board.
Providing and fixing of mechanical equipements required for Alum solution tank with electrically driven paddle assembly fitted with suitable reduction gear mechanism coupled with 3 phase electrical motor 1 HP Capacity kirlosker/ Cramptan greaves make along with 40mm dia PVC Pipe andpipe fittings upto point of application in the flash mixer along with washout arrangement plus 25mm Dia GI inlet water line from back wash tank to Alum tank with GI pipe specials and Gate Valves (B CLASS PIPE) including electrical operating devices complete job
Providing fixing of mechanical equipments required for Bleach solution tank with electrically driven paddle assembly fitted with suitable reduction gear mechanism coupled with 3 phase electric motor 1HP capacity KIRLOSKAR /CRAMPTON Greaves make). Along with 40mm Dia PVC pipe and pipe fittings upto point of application in the flash mixer along with washout arrangement plus 25mm dia GI inlet waterline from backwash tank to alum tanl with GI pipe specials and gate valves (B-Class pipe) including electrical operating devices complete job.
Providing and fixing of MS rotating bridge fabricated out of ISA 50x50x6mm suitable for bearing silt load of clarifloculator (clarifier radius = 8.0m and floculation chamber radius =3.5m). The job includes central bearing assembly shaft assembly MS WHEELS O-STOP WHEELS, end carriages with adequate rating prime mover 3 phase 440 volts 50 HZ including fly Wheel plus MS Rail ISLC-100 on fish plate grounted on top base of calrifloculator in cement concrete 6mm thick chequreds floring over full span of bridge. the job includes providing and installation of 3 phase cubical electrical pannel having capacity of 63 AMP with one incomming feeder and one out going feeder including of auxilary system fitted with appropriate rating 3 phase MCCB, OCB and MLI (L&T make) Starters of electrical motors and end carriage system. the job also includes connceting pole system and appropriate guage PVC Copper wire complete job.
Providing installation testing commissioning of flash mixer assembly suitable for a Dia of 1.5m comprising of SS churners with vertical type hollow shaft prime mover 3 phase 450 RPM. The job includes constant bleed assembly with reduction gear box and operational gear to regulate the bleed. Complete job
Providing installation testing commissioning of 3 phase oil immersed 30 KVA VOLTAGE STABLIZER (SERVO make) capable to operate incoming voltage of 180 Volts and out going voltage 410+- 10% volt complete job.
Providing laying of 19/18 PVC Copper conductor to be laid as service line from nearest LT pole upto main pannel board including 40mm PVC rubber sleeve to be laid underground
Providing and fixing heating points in 4.0 mm PVC Copper wire.
Providing and fixing of lighting points inm 2.5/1.5mm PVC Copper wire ,LED conical type of handles/ SYSKA make of 8 WATT including push buttons etc complete job.
Providing and fixing of Philips make high mass security lights to be fitted inside filtration plant premises with high mass GI Poles complete job
Providing and laying of bulk head electrical points in 1.5mm PVC copper wire fitted with 8 WATT LED blubs.
Providing and fixing of exhaust fan in the chemical house complete job.(HAVELLS, USHA, CROMPTON GREAVES make)
Providing and fixing of CEILING fan in the operating room complete job.(HAVELLS, USHA, CROMPTON GREAVES make)
Providing necessary earthing for motor pannels lighting and heating networks as per prevailing electric rules with latest amendments with necessary medium including refilling complete job. (Electrode type) complete job
Providing and laying of shock proof 20mm thick rubber mating of JOTHI make
Providing and fixing of 50 KVA DG set Kirloskar green air cooled complete job.
Providing installation and succesful testing of voltage stablizer of reputed make 50 KVA capacity.
Supply and filling in plinth with fine sand under floors including watering ramming consolidating and dressing complete.
Electrical sub station 100 KVA including poles and conductor other allied fittings and fixtures, channel, nuts, bolts, including LT and HT poles and conductor complete job.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
Painting steel work with deluxe multi surface paint ofrequired shade to give an even shade. Two or more coats applied @0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture.
Providing of wire crates including all carriage complete job.
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall:-
15 mm dia. nominal bore
20 mm dia. nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :-
20 mm nominal bore
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) :-
15 mm nominal bore
20 mm nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:-
Long pan pattern white vitreous china W.C. pan of size 580 mm.
Providing and fixing Salem Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 19.10A1 Kitchen sink with drain board
Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing:-
Rectangular shape 300x450 mm
Providing and fixing soil, waste and vent pipes : PVC type-B :
100 mm dia
75 mm dia
Providing and fixing CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:-
Providing and fixing bright finished brass handles with screws etc. complete :-
Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete:-
200 mm weighing not less than 240 gms.
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931
19.43 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in?charge.
Providing and fixing of 50 ltr capacity geysers of Venus, ReCold or equivalent including fittings, and complete job
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 20 mm dia
Providing and fixing of superior quality wall to wall matting as per the direction of engineer incharge including 12 mm polystyreng fom.
Construction of RCC ring type soakage pit of standard size & 6 mtr depth complete job.
Carriage of material from sourse to dumping site at road by mechanical transport:-
Cement & steel for avg. lead of 10 Km
Sand for avg. lead of 30 Km
20mm Aggregate for avg. lead of 15 Km
40mm Aggregate for avg. lead of 15 Km
Stone solling For avg lead of 10 km
Quarry stone for avg lead of 30 km
Bricks 10 Km
Extra Carriage of pipes material from dumping site upto actual site of work by manual labour for avg lead of 500mtrs:-
250 mm dia DI pipe
200 mm dia DI pipe
150 mm dia DI pipe
100 mm dia DI pipe
80/65/50/40/25/20/15 mm dia GI pipe
Extra Carriage of material by manual labour from dumping site upto actual site of work . For Avg. lead of 100 mtr:-
Cement
Steel
Sand and 20mm agg.
40mm Aggregate
Stone solling/quarry stone
Extra Carriage of material by manual labour from dumping site upto actual site of work for Avg. lead of 300 mtr:-
Cement
Steel
Sand and 20mm
40mm Aggregate
Stone solling/quarry stone
Bricks
Shree Contractor
M/s Prakash Builders
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid