Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | H3₹5.6 LAccepted-AOC GOVT CONT VILLAGE AND P O NANIKHAD TEHSIL BHATTIYAT AND DISTT CHAMBA H P | ₹5.6 L Quoted ₹7.5 L | H3 | Accepted-AOC Work Awarded |
| 2 | H1₹8 LRejected-Finance | ₹8 L | H1 | Rejected-Finance First Highest |
| 3 | H2₹7.8 LRejected-Finance HIMACHAL PRADESH HP | ₹7.8 L | H2 | Rejected-Finance Second Highest |
| Sl No | Description | Qty | Unit | VIDAL SHARMA H1 | A.R ENTERPRISES H3 | Ajay Kumar H2 |
|---|---|---|---|---|---|---|
| 1.00 | Supply installation Testing & commissioning of horizontal spindle, horizontal/radial split casing and suction /(Back-pull out arrangements) single/double/multistages star rated Centrifugal pumps of combination of pumps in series/parrelled of recommended make such as Mather and Platt/KBS/Beacon Weir/Kirloskar/BE/Jyoti or of approved make by JSV (HP) list attached as per BIS 1520-1980 with upto date ammendments, read with IS:9137-1978 as per latest edition suitable for lifting water for under mentioned characterestice with implellers / priming funnels, casing ring and shaft sleeves, shaft with cast iron casing coupled directly through a flexible coupling on a common MS/ cast steel base plate (base plate to be from the manufacturer of the pumping unit only) to slip ring / squirrel cage screen protected drip proof induction motor / motors of standard make such as Kiriosker/ BHEL/Crompton/NGEF/GEC/Siemens/Jyoti/ABB and suitable for operation on 415 (+/-)15 volts, 50 cycles / second 3 phase AC electric supply. The power of electric motor/motors should be at +10% in excess of the maximum power required by the pump/ pumps in the operation range of (+) 10% and (-)15% of the duty point head. The motor/ motors as per ISI: 325:1978 with upto date amendments read with IS 900:1972. It should include cost of bearing nuts, bolts and painting etc. and should meet the following requirements: including pump sets (working+standby), necessary piping and control valves alongwith electrical works including all taxes, insurance, transportattion, freight charges, inspection charges, loading, unloading, conveyance to Departmental stores/ site, stacking etc. including earthing, specials and wastage etc:complete. | 1 | Job | 8,00,000 ₹8 L | 7,50,000 ₹7.5 L | 7,80,000 ₹7.8 L |
Tender Value
₹5.0 L
EMD Value
₹10,002
Closing Date
4 Oct 2025, 12:00 pmClosed
Executive Engineer JS Division Salooni
EE JS Division Salooni
AR MO LWSS Okhali Ghatta Ohra Banetu in GP Ohra Simni Tehsil Salooni Distt Chamba HP SH Prividing installation testing of centrifugal pump motor 1 no set 25 HP
2025_HPIPH_115834_1
EE-JSD-GA-Tender 5534-5603 dt 24-9-2025
Open Tender
Pumps/Motors
EE JSD Division Salooni
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
₹10,002
11 Dec 2025
25 Sept 2025
4 Oct 2025
25 Sept 2025
4 Oct 2025
25 Sept 2025
Amount
Supply installation Testing & commissioning of horizontal spindle, horizontal/radial split casing and suction /(Back-pull out arrangements) single/double/multistages star rated Centrifugal pumps of combination of pumps in series/parrelled of recommended make such as Mather and Platt/KBS/Beacon Weir/Kirloskar/BE/Jyoti or of approved make by JSV (HP) list attached as per BIS 1520-1980 with upto date ammendments, read with IS:9137-1978 as per latest edition suitable for lifting water for under mentioned characterestice with implellers / priming funnels, casing ring and shaft sleeves, shaft with cast iron casing coupled directly through a flexible coupling on a common MS/ cast steel base plate (base plate to be from the manufacturer of the pumping unit only) to slip ring / squirrel cage screen protected drip proof induction motor / motors of standard make such as Kiriosker/ BHEL/Crompton/NGEF/GEC/Siemens/Jyoti/ABB and suitable for operation on 415 (+/-)15 volts, 50 cycles / second 3 phase AC electric supply. The power of electric motor/motors should be at +10% in excess of the maximum power required by the pump/ pumps in the operation range of (+) 10% and (-)15% of the duty point head. The motor/ motors as per ISI: 325:1978 with upto date amendments read with IS 900:1972. It should include cost of bearing nuts, bolts and painting etc. and should meet the following requirements: including pump sets (working+standby), necessary piping and control valves alongwith electrical works including all taxes, insurance, transportattion, freight charges, inspection charges, loading, unloading, conveyance to Departmental stores/ site, stacking etc. including earthing, specials and wastage etc:complete.
Ajay Kumar (BID ID -561238)
A.R ENTERPRISES (BID ID -561222)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid