Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.2 LAccepted-AOC FLAT NO 4 C GH 39 MANSA DEVI COMPLEX SECTOR 05 PANCHKULA 134 109 HRY | PANCHKULA | PANCHKULA | HARYANA | 134109 | ₹23.2 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹29.7 LRejected-Finance | ₹29.7 L | L2 | Rejected-Finance Other than lowest |
| 3 | L3₹30.4 LRejected-Finance | ₹30.4 L | L3 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | Babu Ram Sud and Sons L1 | N.N.CONSTRUCTION L2 | KUNDRA CONSTRUCTIONS L3 |
|---|---|---|---|---|---|---|
| 1.00 | Material and Labour for 10 mm thick rendering in CM 1:3 on concrete surface (edges of chajjas, roof, roof projections and similar work over 10 mm thick dubbing out average on irregular face of walls) in two layers, finished the surface even and smooth without using extra cement, including taking down loose/damaged concrete from the surface complete all as specified and directed.
Note:- Double scaffolding and necessary shuttering shall be deemed to be included in the quoted rates against this item. | 70 | Sqm | 320.17 ₹22,411.90 | 245 ₹17,150 | 232 ₹16,240 |
| 2.00 | Demolition Of RCC (reinforcement cut as required to faciliate demolition) of roof, floor ( other than ground floor) , beam , staircases, landing , chajjas and similar suspended works complete all as specified and directed. | 0.4 | Cum | 147.5 ₹59 | 2,500 ₹1,000 | 1,000 ₹400 |
| 3.00 | Material and Labour for exterior painting work including complete removal of existing loose paint layers by using jet pressure washer and crack filling up to 3 mm by using crack seal & up to 10mm by using textured crack filler/repair mortar. Touch-up by using wall putty with silicon additives to obtain required surfaces as directed followed by application of one coat of Smartcare Damp prime exterior primer on entire walls and Chajjas and then applying two coats of modified acrylic smooth emulsion exterior grade with silicon having anti-algal and Dust pickup resistance properties,(Nano technology) Material should be applied (Dilution, Recoating period etc..) as per manufacturer instructions by using fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSI complete all as specified and directed.
Make: Asian Apex Suprema or equivanet duly approved by AGE(I) Highground.
Note: The above specification is guaranteed for 7 years Performance Warranty. | 4,010 | Sqm | 197 ₹7.9 L | 305 ₹12.2 L | 315 ₹12.6 L |
| 4.00 | Material and Labour for complete removal of existing paint by scraping and sanding with mechanical wall sander (Having mechanical vacuum mechanism) sanding pad using a 80 grit sanding paper to make surface free from dust, or loose paint by skilled labour. Crack filling up to 3mm by using crack seal & up to 10mm by using textured crack filler. Applying upto 2mm thick wall putty with silicon additives (Water proof putty).Then done sanding as per requirement. Followed by application of one coat of interior wall primer on walls and ceiling and then applying two coats of distemper. Material should be applied (Dilution, Recoating period etc..) as per manufacturer instructions by using Roller/fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSI complete all as specified and directed.
Make: Asian Tractor Distemper or equivanet duly approved by AGE(I) Highground. | 4,000 | Sqm | 197 ₹7.9 L | 195 ₹7.8 L | 205 ₹8.2 L |
| 5.00 | Material and Labour for applying upto 2mm thick wall putty with silicon additives (Water proof putty) over cured plaster. Then sanding with mechanical wall sander (Having mechanical vacuum mechanism) by using variable grit sanding paper to make surface free from dust, or loose particles by skilled labour. Followed by application of one coat of interior wall primer on walls and ceiling and then applying two coats of distemper. Material should be applied (Dilution, Recoating period etc..) as per manufacturer instructions by using fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSIcomplete all as specified and directed.
Make: Asian Tractor Distemper or equivanet duly approved by AGE(I) Highground. | 560 | Sqm | 97 ₹54,320 | 180 ₹1.0 L | 195 ₹1.1 L |
| 6.00 | Material and Labour for applying upto 2mm thick wall putty with silicon additives (Waterproof putty). Then sanding with mechanical wall sander (Having mechanical vacuum mechanism) by using variable grit sanding paper to make surface free from dust, or loose particles by skilled labour. Followed by application of one coat of Smartcae Damp prime exterior primer on walls and Chajjas and then applying two coats of modified acrylic smooth emulsion exterior grade with silicon having anti-algal and Dust pickup resistance properties,(Nano technology). Material should be applied (Dilution, Recoating period etc..) as per manufacturer instructions by using fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSI complete all as specified and directed.
Make: Asian Apex Suprema or equivanet duly approved by AGE(I) Highground. | 880 | Sqm | 125 ₹1.1 L | 305 ₹2.7 L | 315 ₹2.8 L |
| 7.00 | Taking down cement plaster on brick or stone walls or concrete surfaces, etc, any description including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish outside MoD land, complete all as specified and directed.
Note : Rate quoted by contractor shall be deemed to include to necessary scaffolding etc. | 1,640 | Sqm | 25 ₹41,000 | 45 ₹73,800 | 30 ₹49,200 |
| 8.00 | Material and Labour for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:6 finished even and fair without using extra cement, complete all as specified as per directed (Internal plaster). | 640 | Sqm | 265 ₹1.7 L | 230 ₹1.5 L | 225 ₹1.4 L |
| 9.00 | Material and Labour for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified (External plaster).
Note:- The rate quoted by contractor is deemed to be included necessary scaffolding and form work upto 12Mtr height or (G+2) storey building. | 880 | Sqm | 297 ₹2.6 L | 295 ₹2.6 L | 285 ₹2.5 L |
| 10.00 | Material and Labour for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces in ceiling (such as chajja,beams, roof projection, balcony, mumty and staircase flight ceiling, roof slab etc.) finished even and fair without using extra cement, complete all as specified and directed by Engineer - in -Charge.
NoteThe rate quoted by contractor is deemed to be included necessary scaffolding and form work upto 12Mtr height or (G+2) storey building. | 120 | Sqm | 320 ₹38,400 | 195 ₹23,400 | 200 ₹24,000 |
Updated dates
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
21 Feb 2026, 6:00 pmClosed
AGE (I) Highground
AGE (I) Highground Chandigarh
MISC REPAIR AND SMART PERIODICAL SERVICES TO BUILDING AT AIR FORCE STATION HIGHGROUND AND AT AIR FORCE STATION BARWALA UNDER AGE (I) HIGHGROUND CHANDIGARH
2026_MES_748929_1
AGE (I)/HG CHD/T-36/2025-26
Open Tender
Civil Works
270 days
AGE (I) Highground Chandigarh
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) Highground
₹60,000
Yes
21 May 2026
17 Jan 2026
28 Feb 2026
17 Jan 2026
21 Feb 2026
31 Jan 2026
Demolition Of RCC (reinforcement cut as required to faciliate demolition) of roof, floor ( other than ground floor) , beam , staircases, landing , chajjas and similar suspended works complete all as specified and directed.
Material and Labour for exterior painting work including complete removal of existing loose paint layers by using jet pressure washer and crack filling up to 3 mm by using crack seal & up to 10mm by using textured crack filler/repair mortar. Touch-up by using wall putty with silicon additives followed by application of one coat of Smartcare Damp prime exterior primer on entire walls and Chajjas and then applying two coats of modified acrylic smooth emulsion exterior grade with silicon having anti-algal and Dust pickup resistance properties,(Nano technology) Material should be applied (Dilution, Recoating period etc..) as per manufacturer instructions by using Roller/fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSI complete all as specified and directed. Make: Asian Apex Suprema or equivanet duly approved by AGE(I) Highground. Note: The above specification is guaranteed for 7 years Performance Warranty.
Material and Labour for complete removal of existing paint by scraping and sanding with mechanical wall sander (Having mechanical vacuum mechanism) sanding pad using a 80 grit sanding paper to make surface free from dust, or loose paint by skilled labour. Crack filling up to 3mm by using crack seal & up to 10mm by using textured crack filler. Applying two coats of wall putty with silicon additives (Water proof putty).Then done sanding as per requirement. Followed by application of one coat of interior wall primer on walls and ceiling and then applying two coats of distemper. Material should be applied (Dilution, Recoating period etc..) as per manufacturer instructions by using Roller/fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSI complete all as specified and directed. Make: Asian Tractor Distemper or equivanet duly approved by AGE(I) Highground.
Material and Labour for applying two coats of wall putty with silicon additives (Water proof putty) over cured plaster. Then sanding with mechanical wall sander (Having mechanical vacuum mechanism) by using variable grit sanding paper to make surface free from dust, or loose particles by skilled labour. Followed by application of one coat of interior wall primer on walls and ceiling and then applying two coats of distemper. Material should be applied (Dilution, Recoating period etc..) as per manufacturer instructions by using fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSIcomplete all as specified and directed. Make: Asian Tractor Distemper or equivanet duly approved by AGE(I) Highground.
Material and Labour for applying two coat of wall putty with silicon additives (Waterproof putty). Then sanding with mechanical wall sander (Having mechanical vacuum mechanism) by using variable grit sanding paper to make surface free from dust, or loose particles by skilled labour. Followed by application of one coat of Smartcae Damp prime exterior primer on walls and Chajjas and then applying two coats of modified acrylic smooth emulsion exterior grade with silicon having anti-algal and Dust pickup resistance properties,(Nano technology). Material should be applied (Dilution, Recoating period etc..) as per manufacturer instructions by using fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSI complete all as specified and directed. Make: Asian Apex Suprema or equivanet duly approved by AGE(I) Highground.
Taking down cement plaster on brick or stone walls or concrete surfaces, etc, any description including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish outside MoD land, complete all as specified and directed. Note : Rate quoted by contractor shall be deemed to include to necessary scaffolding etc.
Material and Labour for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:6 finished even and fair without using extra cement, complete all as specified as per directed (Internal plaster).
Material and Labour for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified (External plaster). Note:- The rate quoted by contractor is deemed to be included necessary scaffolding and form work upto 12Mtr height or (G+2) storey building.
Material and Labour for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces in ceiling (such as chajja,beams, roof projection, balcony, mumty and staircase flight ceiling, roof slab etc.) finished even and fair without using extra cement, complete all as specified and directed by Engineer - in -Charge. NoteThe rate quoted by contractor is deemed to be included necessary scaffolding and form work upto 12Mtr height or (G+2) storey building.
Material and Labour for preparation of old plastered or unplastered surfaces of Ceiling by brooming down with steel brushing, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spot etc and applying two coat of white wash on Ceiling, complete all as specified and directed.
Material and Labour for preparation of new plastered surfaces of Ceiling by brooming down with steel brushing, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spot etc and applying three coat of white wash on Ceiling, complete all as specified and directed.
Material and Labour for complete removal of existing treatment from internal surfaces on walls by wire brushes and applying two coat of wash on wall, complete all as specified and directed.
Material and Labour for preparation of new plastered surfaces of walls and applying three coat of wash on wall, complete all as specified and directed.
Material and labour for preparation of old wooden surfaces over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.
Material and labour for preparation of old steel surfaces over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.
Material and Labour for providing and fixing 300mm X 200mm acrylic name plate of 3mm thick acrylic sheet, laser engraved/printed with building/ quarter number as per approved design, including all necessary fixtures, adhesive, and hardware for proper fixing as designated location, complete in all respect as directed.
Notes: The work for periodical services shall include the following elements and the rates quoted by the bidders shall be deemed to include for the same:- (a) The work pertaining to periodical services shall be executed by the contractor through authorised applicator of manufacturer of the materials like Exterior Emulsion paint & putty etc after prior approval of the AGE(I) in writing. A MOU to this effect shall be submitted with bid. (b) The Contractor shall upload the "Memoradum of Understanding" (MOU) entered into, with at least one of the approved manufacturers/ manufacturers mentioned in the contract , under cover-I of the e bid , failing which the bid shall be liable to be rejected and no claim whatsoever shall be entertained on this account. (c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures and safety norms as required. (d) Removing of Nails, making good holes, cracks etc (e) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (f) Spreading and removing protective covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery, electric fittings , wirings etc. Drops and splashes of paint/putty to be cleaned to the entire satisfaction of Engineer-in-Charge. (h) Sample patch of 10 Sqm area shall be prepared considering all the items of periodical and shall be got approved from AGE(I) prior to carrying out further work.
Note: The total amount shall subject to adjustment of credit of Rs 0.00 for old Materials as per Schedule of Credit
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.71 MB
07tenderdocT36.pdf
Tender Documents • 1.39 MB
BOQ_838719.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid