SPECIAL REPAIR OF E/M INSTALLATION AND REPLACEMENT OF BER E AND M ITEMS OF EXTERNAL SERVICES AT AF STATION JAIPUR

Amount

Demolition of Concrete(un reinforced)in ground floor and pavings n exc 15 cm all as specified and directed

M&L Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) avg. 25 mm thick in levelling course for laying floor finish complete.

Dismantling floor, health or wall tilling and kota stones including cement mortar bedding (bur not backing), removing rubbish off the premises complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc.0.11 sqm but not exc 0.18 Sqm,, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M & L for glazed ceramic coloured tiles 7 to 8mm thick area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including rendering 10 mm thick in cement plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces for backing coat of tiles complete all as specified and directed.

M&L for light shade Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for light shade Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Taking down Chowkatts or frames n exc 1.5 sq m each with shutters complete all as specified and directed

Taking down Chowkatts or frames exc 1.5 sq. m but n exc 4 sq m each with shutters complete all as specified and directed

S&F 2nd class hardwood, 30mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats..

S&F 35 mm thick 2nd class HW, glazed and skeleton shutters, open rebated & prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass,gauze etc .

S&F galvanized galvanised stainless steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned teaks galvanised wire staples fixed all as specified

S&F 100 mm size type B-21 Mild steel butt hinges fixed complete all as specified and directed.

S&F Stainless Steel handles each 125 mm long complete.

S&F Stainless stell barrel tower bolt 125 mm size complete.

S&F Stainless steel sliding door bolts, size 300 mm plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolt sand nuts, four on bolt plate and two on staple plate and fixed

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150 mm long fixed in floor complete

M&L preparing new steel surfaces over 10 cm in width or girth of any description and applying two coat of synthetic enamel paint over a coat of red oxide primer complete.

M&L preparing old steel surfaces over 10 cm in width or girth of any description and applying one coat of synthetic enamel paint complete.

M&L preparation of new wooden surfaces of any description, over 10 cm in width or girth, applying two coats synthetic enamel paint over a coat of pink primer complete.

S&F, in repair, Steel windows with side hung shutters includig projecting typehinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete.

S&F 9 mm thick both side pre laminated particle board (medium density) commercial type fixed to wooden frame / shelf complete all as specified and directed.

Supply and fixing 2nd class hard wood in scantling clean sawn, timber framed fixed in any position as framed work with nails and including dismantaling all as specifed

S&F 2nd class hard wood Plain fillets exc 6 not exc 13 sq. cm but bull nosed, splayed,chamfered or rounded on one edge or face.

S & F of 30 mm wide flap when open, mild steel bright finish or electro galvanised continuous (Piano) hinge complete all as specified and directed.

S&F Stainless steel Hasp & staple safety type stove enameled black including bolt to hinge plate and fixed with with screws 75 mm in size.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, bright finished

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete.

S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming toFe 410-W (Gde E- 250) quality A. complete.

Excavating in posts holes (or similar holes) in hard/dense soil each n.exc. 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25 cm, watering, and removing surplus soil to a distance n.exc. 50 m and making good surface as specified and directed.

M/L for providing PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete as specified and directed.

S&F hand rails, half round or other stock section as in posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) incl all necessary drilling, bol;ting or riveting, etc, and similar work conforming to Fe-290 ( E-165) as specified and directed.

Restraining and resecuring including making good staples etc of existing old galvenised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm complete all as specified and directed.

S&F mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooking ends stiffeners confirming to Fe-410-W (Gde. E-250) quality A or Fe-290 (Gde-E-165) as specified and directed.

S&F mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other, or screwed bolh ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt n.exc. 5 cm, diameter of neck 5 to 10 mm as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layer n.exc. 25 cm in soil as specified and directed.

Removing excavated material n.exc. 50 mtr & deposited where directed at a level n.exc. 1.5 m above the starting point as specified and directed.

Preparation of new steel surfaces of any description, n exc 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer as specified and directed.

Preparation of old steel surfaces of any description, n exc 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint as specified and directed.

S&F GI chain link fencing wire or mesh size 100 x 100 mm and dia of GI wire 3 mm fixed to any type of standard flat iron straining bolts etc including binding with wire incl taking down existing fencing complete all as specified and directed.

S&F galvenised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staple or steel pins, etc as specified and directed.

Demolition of cement Concrete(un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) as specified and directed.

M&L, PCC 1:4:8 type D-2, ( using 40mm graded stone aggregate) 100 mm thick as in sub base of floor complete all as specified and directed.

Supply and spreading fine aggregate (sand) for sand cusioning to receive interlocking tile , complete all as specified and directed.

M&L machine pressed precast coloured Interlocking paver block / tiles any shape and size 60 mm thick confirming to IS- 15658-2006 of M-35 grade chemically treated rubber moulded complete all as specified and directed.

M&L for preparation of surfaces plastered or unplastered old surfaces on walls and applying one coast of distemper oil emulsion complete all as specified and directed.

M&L for preparation to existing old plastered surfaces of wall and applying one coat of cement based paint complete all as specified and directed.

M&L for preparation to old plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

Taking down cement plaster on old brick or stone walls , including raking out joints, hacking for key, scrubbing down with water, etc. and replastering 15mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for preparation to new plastered surfaces of wall etc and applying two coats of oil bound distemper on walls over a coat of 3 mm thick wall care putty all as specified.

M&L for preparation to new plastered surfaces of wall and applying two coat of cement based paint complete..

Supply, testing and commissioning of submersible pump borewell type set of discharge capacity 300 LPM at 45 mtr head of 5 HP, 3 phase 415 volts, 50 Hz,No of stages 06 Nos ,outlet size 65mm made of high grade stainless steel SS304 construction resist corrosion and withstand tough operating condition ,voltage range 250-440V and including high thrust capacity and consisit of IE4 super presium efficient motor complete all as specified and directed.

Supply, testing and commissioning of submersible pump borewell type set of discharge capacity 230 LPM at 48 mtr head of 3 HP, 3 phase 415 volts, 50 Hz,No of stages 04 Nos ,outlet size 65mm made of high grade stainless steel SS304 construction resist corrosion and withstand tough operating condition ,voltage range 250-440V and including high thrust capacity and consisit of IE4 super presium efficient motor complete all as specified and directed.

Supply, testing and commissioning of centrifugal pump set of discharge capacity 1290 LPM at 30 mtr head of 15 HP, 3 phase 415 volts, 50 Hz, with IE4 super premium efficient motor ,F class insulation ,dynamically balanced rotating parts ,suction size-80mm ,delivery size-65mm ,mounted on MS chanel/common base plate and fixed with suitable bolts, grouted in PCC foundation , 30 CM above floor level including PVC insulated single core unsheathed copper conductor of 10 sqmm size drawn in PVC conduit for connection from starter to motor terminal, including the following accessories. Make - Kirloskar/Crompton /CRI/KSB. (i) Barss foot valve - 01 No of size suitable for suction of pump.

Supply, testing and commissioning of centrifugal pump set of discharge capacity 650 LPM at 30 mtr head of 7.5 HP, 3 phase 415 volts, 50 Hz, with IE4 super premium efficient motor ,F class insulation ,dynamically balanced rotating parts ,suction size-65mm ,delivery size-50mm ,mounted on MS chanel/common base plate and fixed with suitable bolts, grouted in PCC foundation , 30 CM above floor level including PVC insulated single core unsheathed copper conductor of 06 sqmm size drawn in PVC conduit for connection from starter to motor terminal, including the following accessories. Make - Kirloskar/Crompton /CRI/KSB. (i) Brass foot valve - 01 No of size suitable for suction of pump.

S&F in replacement Pressure booster pump (stainless steel monoblock pumpset self priming with automatic pump controller) 1HP, Min Head 30 metre, Single phase, 230 V, 50Hz complete all as specified and directed.

S&F in replacement Cable with copper conductor PVC round sheathed (flexible) of size 6 sqmm 3 core for submersible pump connection complete all as specified and directed.

S&F in replacement direct on Line (DOL) alloy steel starter of rating 4 - 6 Amps, suitable for 3 HP submersible pump 415 Volt, 50Hz with overload protection complete all as specified and directed. Make: L&T/ Havells/ Siemens/C&S

S&F in replacement direct on Line (DOL) alloy steel starter of rating 7 to 10 Amps, suitable for 5 HP submersible pump 415 Volt, 50Hz with overload protection complete all as specified and directed. Make: L&T/ Havells/ Siemens/C&S

S&F in replacement star delta fully automatic starter for 15HP centrifugal monoset pump, 415 Volt, 50Hz with overload protection complete all as specified and directed. Make: L&T/ Havells/ Siemens/C&S

S&F in replacement star delta fully automatic starter for 7.5 HP centrifugal monoset pump, 415 Volt, 50Hz with overload protection complete all as specified and directed. Make: L&T/ Havells/ Siemens/C&S

Dismantling and Disconnecting the cables from LT Panel and moving to MES store for issue as schedule of credit complete all as spd and directed.

Supply installation and testing 3 phase and neutral, 415 volts factory made, Indoor type, mounted on 50x50x6 mm angle iron stand of height 45 cm embedded in suitable PCC foundation, dust and vermin proof cubical type, LT panel fabricated from 2.0 mm thick ( minimum) CRCA sheet steel powder coated with Grey shade (RAL-7035) after seven tank process fully compartmentalized design with 4 Nos of busbars made of copper suitable for 800 amps TPN pre-wired with suitable size of copper strip, including complete wiring and comprising of INCOMMING (a) MCCB 630 A FP 36KA with Microprocessor based release for O/C + S/C, spreader link and Ext Rotary Handle. (b ) Digital Ampere Meter (c) Indicating light RYB LED 230 V AC (d) Digital Volt meter (e) Control MCB 6A, 10 KA (f) CT 630/5A tape wound. OUTGOING (a) MCCB 400A,FP, 36 KA with TM release for O/C + S/C, spreader link and Ext Rotary Handle-01 Nos (b) MCCB 320A , FP, 36 KA with TM release for O/C + S/C, spreader link and Ext Rotary Handle-01 Nos. (c) MCCB 100A,FP, 25 KA with TM release for O/C + S/C, spreader link and Ext Rotary Handle-04 Nos

Supply installation and testing in replacement 3 phase and neutral, 415 volts factory made, Outdoor type, mounted on 50x50x6 mm angle iron stand of heigh 45 Cm above ground level and 45 cm embeded in suitable PCC foundtion, dust and vermin proof cubical type, LT panel fabricated from 3.15 mm thick ( minimum) CRCA sheet steel powder coated with Grey shade (RAL-7035) after seven tank process having thickness of 50-6- microns fully compartmentalized design with 4 Nos of busbars made of high conductivity 99.9% pure copper of ETP grade suitable for 600 amps pre-wired with suitable size of copper strip, including complete wiring and comprising of INCOMMING (a) MCCB 400 A FP 36KA with Microprocessor based release for O/C + S/C, spreader link and Ext Rotary Handle. (b ) Digital Ampere Meter (c) Indicating light RYB LED 230 V AC (d) Digital Volt meter (e) Control MCB 6A, 10 KA (f) CT 400/5A tape wound. OUTGOING (a) MCCB 320A,FP, 36 KA with TM release for O/C + S/C, spreader link and Ext Rotary Handle-01 Nos (b) MCCB 200A , FP, 25 KA with TM release for O/C + S/C, spreader link and Ext Rotary Handle-01 Nos. (c) MCB TPN 63 A,FP, 10 KA -03 Nos

Supply installation and testing in replacement 3 phase and neutral, 415 volts factory made, Outdoor type, mounted on 50x50x6 mm angle iron stand of heigh 45 Cm above ground level and 45 cm embeded in suitable PCC foundtion, dust and vermin proof cubical type, LT panel fabricated from 3.15 mm thick ( minimum) CRCA sheet steel powder coated with Grey shade (RAL-7035) after seven tank process having thickness of 50-6- microns fully compartmentalized design with 4 Nos of busbars made of high conductivity 99.9% pure copper of ETP grade suitable for 600 amps pre-wired with suitable size of copper strip, including complete wiring and comprising of INCOMMING (a) MCCB 400 A FP 36KA with Microprocessor based release for O/C + S/C, spreader link and Ext Rotary Handle. (b ) Digital Ampere Meter (c) Indicating light RYB LED 230 V AC (d) Digital Volt meter (e) Control MCB 6A, 10 KA (f) CT 400/5A tape wound. OUTGOING (a) MCCB 320A,FP, 36 KA with TM release for O/C + S/C, spreader link and Ext Rotary Handle-01 Nos (b) MCCB 200A , FP, 25 KA with TM release for O/C + S/C, spreader link and Ext Rotary Handle-01 Nos. (c) MCB TPN 63 A,FP, 10 KA -08 Nos

LAKSHMI ASSOCIATES

M.S. ENTERPRISES