Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L2₹11.3 LAccepted-Finance | L2 | Accepted-Finance Ok | |
| 2 | L2₹11.8 LAccepted-Finance | L2 | Accepted-Finance Ok | |
| 3 | L3₹12.0 LAccepted-Finance | L3 | Accepted-Finance Ok | |
| 4 | L4₹15.9 LAccepted-Finance | L4 | Accepted-Finance Ok |
Tender Value
₹14.7 L
EMD Value
₹29,400
Closing Date
2 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I CG
Noida
PROVN OF FIRE STARICASE OF CGKG SCHOOL AT COAST GUARD SECTOR-23 NOIDA
2023_MES_626833_1
AGE I CGN 57 23 24
Open Tender
Civil Works
Item Rate
180 days
Noida
E a i
8 documents required · 8 mandatory
₹500
AGE I CG
₹29,400
21 Dec 2023
4 Nov 2023
4 Dec 2023
4 Nov 2023
2 Dec 2023
18 Nov 2023
Amount
Excavation in trenches in soft/loose soil n exc 1.5m wide and n exc 1.5 m depth for foundation etc n exc 10 sqm on plan and getting out complete.
All as per Srl item No. 01.00, for each additional 1.5m or part there of in depth beyond the first 1.5 m .
M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft /loose soil
M&L for Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed in soft /loose soil
M&L cement concrete in foundation filling and mass concrete type D2 1:4:8 (40 mm gradded Agg.)
M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and as directed.
M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finish complete all as specified and directed.
M&L for 10mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
All as per Srl Item No. 08.00 but 6mm to 8mm dia.
M&L for providing Reinforced Cement Concrete design mix M-25 using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed.
M&L for providing Reinforced Cement Concrete design mix M-25 using 20 mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.
S&F Plate (plain or chequered) channel or square cut or notched (ordinary and counter sunk) forming holes, without any attachment
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one and screwed both ands, each screwed and to be fitted with washers and one hexagonal or square but length of bolt exc 30cm long of dia 20 mm.
S&F roof trusses Fe 410W grade E250 quality 4 (framed) trussed Purlins, crane (quanties, rails and fastening (Beam, tea ange, channel or flat section) including distance pieces, cleats etc
Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core.
M&L for rendering 10 mm thick cement plaster with cement mortar (1:6) on other than fair faces of brick work or concrete surfaces and finished even and fair.
Preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper (white/tinted) over one oat of primer all as specified and directed.
M&L for rendering 15mm thick cement plaster with cement mortar(1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement .
Supply only Liquid water proofing compound Make : pidilite /sika/ fosroc/stp
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces and Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.
S&F for Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately)
S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed
S&F for SS butt hinges 100mm medium weight cold rolled mild steel.
M & L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165
S&F aluminium anodised barrel tower bolts extruded section of size 200 mm, all as specified and directed
S&F aluminium handle extruded fabricate type anodised of size 150 mm complete all as spd and directed.
S&F MS helical door spring including roller & roller plate complete 300 mm size complete all as specified & directed.
S&F 150 mm long floor door stopper of alu alloy body and tongue, anodised with hard drawn steel spring complete.
S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof coverings/claddings to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M & L for Mild steel sheet 1.00 mm thick eaves gutters 100 mm dia, galvanised class 3, half round with rounded edges all as specified and directed.
Supply and fixing 110 mm bore PVC (SWR) pipes incl necessary joints like union, elbow, tee etc laid in trenches and jointed as specified
All as per Item No 33.00 above but fixed to walls.
M&L for painting to steel surface of any description of woodtech PU palette (Polyuretheane Coating) over two coat of woodtech PU palette primer including sanding as per manufacturer instruction and directed by Engr-in-charge.
Note: Immediately after acceptance of contract, the contractor shall get the design of MS structure for Fire staircase with foundation design, suitably designed by structural consultant and vetted from Govt Engineering college NIT/IIT before execution of work. The Contractor shall consider aspect of payment of fee to consultant while quoting and no extra whatsoever will be paid. DESIGN DATA: SBC = 100 KN/m2 at 1.5 m depth Wind terrain category 4 as per IS-875 Part-III
Shree Ganpati Enterprises
M/S R.S. Builders
AMBEY CONSTRUCTION
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .