WORK TENDER

Amount

PART-I (WORK)

Carriage of Main & Auxiliary structure from Electy., fabrication unit Naini Prayagraj To 132 KV S/S Baghpat.

Sorting, counting, stacking mark wise and head loading of structure (approx 3.7 MT) on truck at electy., fabrication unit Naini Prayagraj.

Safe carriage of following loaded structure from electy. fabrication unit Naini Prayagraj To 132 KV S/S Baghpat, under ETD-Baraut (Distance approx. 730 km).

1. CCR - (2 No.) Column 2. CGR - (1 No.) Beam 3. CPR - (1 No.) Peak 4. TMR - (1 No.) Mast 5. ALP - (13 No.) 6. ABL - (2 No.)

Unloading of carriage structure (approx 3.7 MT) from truck its Sorting, Counting and proper Stacking at the S/Ss premises as per direction of super visioning engineer.

Dismantling of old and used lettic type main structure as CCR-01 No. (approx weight- 485.96 Kg.), CGR-01 N. (approx weight-304.76 Kg), CPR-01 No. (approx wieght-58.62 Kg) and TMR-01 No. (approx wieght-28.88 Kg)

Erection of 120 Watt LED light fitting complete of standard make as Bajaj/Havells/Crompton make with MCB box and GI bend pipe using control cable of size 4cx2.5sqmm.

Laying of GI Pipe "B" Class 25 NB at 33 KV CT, PT with help bend, socket, etc. for pilfer proofing.

Erection of new 33 KV bus bar One nos span of 14 meter section by laying and stringing of ACSR single Zebra conductor including hoisting of disc insulator strings & tension fitting etc. to be provided by department after due cutting/fixing of conductors of required size etc. including shifting of all materials from store to switchyard (01 job. Per phase per section) with all associated work to complete the job satisfactorily.

Erection of 33 KV lattic type main & Auxiliary Structure as ALP-13 Nos (approx weight- 121Kg), ABL-02Nos (approx weight-341 Kg), CCR-02Nos (approx weight-485.96 Kg), CGR-01Nos (approx weight-304.76 Kg), CPR-01Nos (approx weight-58.62 Kg) and TMR-01Nos (approx weight-28.88 Kg) and 33 KV Circuit Breaker related structure installing as per drawing with the help of G.I. nut & bolt, flat, spring washer, matching the hole.

Erection of old and used 33 KV lettic type main structure as CCR-01 No. (approx weight- 485.96 Kg.), CGR-01 N. (approx weight-304.76 Kg), CPR-01 No. (approx wieght-58.62 Kg) and TMR-01 No. (approx wieght-28.88 Kg) with the help of G.I. nut & bolt, flat, spring washer, matching the hole including modification (if required).

Erection of 33 KV equipments including shifting of equipments and accessories from store to erection site, fixing of required clamps, all related cable termination with cable glands according schedule, welding and other related associated works with testing and commissioning.

36 KV Bus Isolator (1250 Amp)

36 KV Line Isolator

36 KV CTs (400/200/1A)

36 KV CT Junction box

33 KV P.Ts.

33 KV Junction Box (P.T)

33 KV VCB

33 KV Tripple feeder control and relay panel (Conventional Type).

Fixing of metering cubical and ABT meter set and other related associated works.

Jumpering of old 33 KV Main Bus to new 33 KV Main Bus with ACSR Zebra conductor with the help of suitable clamps and required cutting and bending of conductors and all other works to complete the job satisfactory.

Jumpering of all equipments of 33 KV Bay with ACSR Panther conductor in between 33 KV Main Bus to Bus Isolator, BI to CB, CB to CT, CT to CT, CT to PT, PT to LA, LA to LI etc. with the help of suitable clamps and required cutting and bending of conductors and all other works to complete the job satisfactory.

Earthing of Structure, Equipments, metering cubicle & Panel. a) Cutting, straightening & laying of following MS flat 750 mm below inside ground and above ground of 50 mm x 6 mm size and 25 mm x 6 mm size MS Flats for earthing of main auxiliary structures, equipment and cable trenches including welding with main earthmat and with the object to be earthed excavation of trenches its back filling painting and all other associated work to complete the earthing work satisfactorily as per technical specification.

Fresh Earthing, Connected with Earthmat 50x6mm

Fresh Earthing, Connected with Earthmat 25x6mm

Laying of following size of control cables in the cable trenches/GI pipe for 33 KV CB, CT, PT, Isolator, tripple feeder panel and Metering cubical etc. in switchyard/ control room as per cable schedule including carriage of cable drums from stores to work site and shifting back to store with all other associated works to complete the job satisfactorily as per technical specifications: - 40 mm dia MS Round Bar (600 RMT) from 400 KV S/S Muradnagar-II. (Approximate Distance is 70 KM) (Hydra/ other conventional methods shall be arranged by the contractor at his own cost).

Laying/terminate, control cable 2cx2.5sqmm

Laying/terminate, control cable 4cx2.5sqmm (in GI pipe if required)

Laying/terminate, control cable 6cx2.5sqmm

Making delta earthing for 30 KV LA with the help of 3 Mtr. long electrodes in the shape of triangle with 1.5 mtr. made by 40 mm M.S. rod and 50x6mm M.S. flat to be connected with earthmat grid and as per technical specification. (MS Flat and rod will be provided the Department)

PART-II (SUPPLY)

Supply of 33 KV bolted type Single tenson fitting for single Zebra conductor for 1x4 No disc insulator complete with hardware fitting d-shackle. D socket. Ball hook, yoke plate d-clip it tenson clamp etc. as per technical specification.

33 KV Isolator clamp for twin panther conductor made of aluminium alloy LM-6.

33 KV CT clamp for twin panther conductor made of aluminium alloy LM-6.

33 KV PT clamp for panther conductor made of aluminium alloy LM-6.

30 KV LA connector made of aluminium alloy LM-6 suitable for single Panther conductor one side connecting the single Panther conductor and another side connecting a plate with 04 Nos. 12 mm dia hole complete with HDG nut bolt & washer as per technical specification.

GI Pipe (1 inch dia "B" Class) and accessories for pilfer proofing of metring CT and PT cable.

4 Bolted type PG clamp made of Aluminum alloy LM-6 with GI Nuts, Bolts & Washer suitable for Zebra to panther.

4 Bolted type PG clamp made of Aluminum alloy LM-6 with GI Nuts, Bolts & Washer suitable for Panther to Panther.

4 Bolted type PG clamp made of Aluminum alloy LM-6 with GI Nuts, Bolts & Washer suitable for Zebra to Zebra.

Galvanized U Bolted 20 mm dia with double nut and washer.

Supply of flexible copper bond made of electrolyte copper rope of size 16 mm dia and having Length 750 mm tinned copper and lug shall be pressed jointed both end of copper bond as per technical specification.

120 Watt LED light fitting complete of standard make as Bajaj/Havells/Crompton make with MCB box and suitable size of GI bend pipe.

Perfect Power Transformer Associates (BID ID -4799406)

M/S DHARMENDRA CHAUDHARY (BID ID -4799259)

M/S AJAY TOMAR CONTRACTOR (BID ID -4799286)