REPAIR CLEANING TO SEWAGE LINES MANHOLES SEPTIC TANKS DRAINS HARDSTANDING FENCING ETC IN TECH AREA AND MD OTM ACCN AT DIAT AND MILIT GIRINAGAR PUNE

Amount

Cleaning of manhole of any description, any size and depth including removing sludge and deposited outside MD land etc including re-fixing of manholes covers and coping complete all as directed.

Mechanically pumping out sewage water from septic tanks/sump well where required and as directed with taking precautionary measurer including tools & plants as required and removing to place out side MD land from the site complete(working in foul condition) complete all as specified and directed.

Cleaning of septic tanks of any capacity by dewatering all the water, taking out the sludge/night soil. Flushing the septic tank with clean water in order to remove all stacked mud/sludge etc cleaning the choked inlets. and outlets of septic tank, removing all the sludge to the outside MD land including surface dressing of the septic tank around to a distance not less than 3mtr complete all as specified and directed. Note: The night soil/sludge including water obtained by cleaning of the septic tank shall be taken out in closed container and desposed off out side MD land by excavating a pit of adequate size depth not exc 1.5 mtr.

Excavation in trenches n.exc 1.5m deep & n.exc1.5m wide for foundaton etc.in hard dense soil and getting out complete all as specified and directed.

Add to item 4.00 for each additional 1.5 m or part thereof in depth beyond the first 1.5 Mtr complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n. exe 15cm thick below or above GL cleaning premises complete all as specified & directed.

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar incl arches, pillars complete all as specified and directed.

Demolition and breaking up 150 mm bore drain pipes (SWG, AC or RCC pipes) set in cement mortar complete all as specified and directed.

Demolition and breaking up 200 mm bore drain pipes (SWG, AC or RCC pipes) set in cement mortar complete all as specified and directed.

Demolition and breaking up 300 mm bore drain pipes (SWG, AC or RCC pipes) set in cement mortar complete all as specified and directed.

M&L for providing plain cement concrete 1:4:8 type D2 using 40mm grade agg as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C1(using 20mm graded aggregate) as in surface channels and drains complete all as specified and directed.

M&L for precast cement concrete block walling exc.10 cm width with solid block PCC 1:3:6 type C1 grade design mix and setting in cement mortar (1:6) complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick or concrete surfaces in CM (1:4) finishing even and smooth without using exta cement complete all as specified and directed.

Cutting into existing manholes for connecting new drains internal dia of pipe 150mm making good to pipe & to or finished and reforming benching as required. 3/4 section in cement concrete (1:2:4) type B-1, smoothcutting out existing benching for forming branch channel (1/2) rendering complete all as specified and directed.

Cutting into existing manholes for connecting new drains internal dia of pipe 200mm making good to pipe & to or finished and reforming benching as required. 3/4 section in cement concrete (1:2:4) type B-1, smoothcutting out existing benching for forming branch channel (1/2) rendering complete all as specified and directed.

All as per item No 16.00 above but 300mm dia pipe complete all as specified and directed.

Extra for forming fair finished drain or channel girth not exc 30cm in cement concrete using extra cement including form mounds etc complete all as specified and directed.

M&L for provided reinforced cement concrete pipe 150mm bore class NP-2 with collars laid and jointed with cement complete all as specified and directed.

M&L for provided reinforced cement concrete pipe 200mm bore class NP-2 with collars laid and jointed with cement complete all as specified and directed.

M&L for provided reinforced cement concrete pipe 300mm bore class NP-2 with collars laid and jointed with cement complete all as specified and directed.

M & L for providing bed to drain pipes 150 mm dia in cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipe after they are laid & tested complete all as specified and directed.

All as per item No 22.00 above but for 200 mm dia pipes.

All as per item No 22.00 above but for 300 mm dia pipes.

Returning filling in soil including spreading levelling, watering & well ramming in layers n. exe 25cm (hard dense soil) complete all as specified and directed.

Removing excavated material not exc 50mtr and depositing where directed at a level not exc 1.50mtr above the starting points in any type soil complete all as specified and directed.

M&L for providing cast iron, soil & waste and vent pipes in any length, with or without ears with cement joints fixed to walls using pipes 75 mm bore including dismantling of old existing pipe complete all as specified and directed.

M&L for providing cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls using pipes 100 mm bore including dismantling of old existing pipe complete all as specified and directed.

S&F of CI bends (any radius) diminishing pieces or taper,100mm bore in repairs complete all as specified and directed.

S&F of CI bends (any radius) diminishing pieces or taper fitted with oval access doors 100 mm bore in repairs complete all as specified and directed.

S&F of CI bends (any radius) diminishing pieces or taper, 75 mm bore in repairs complete all as specified and directed.

S&F of CI bends (any radius) diminishing pieces or taper fitted with oval access doors 75 mm dia, in repairs complete all as specified and directed.

S&F of CI branch pieces single (equal or unequal) ordinary or inverted (Spigot or socket type) or with parallel branches 100 mm bore complete all as specified and directed.

S&F in repairs for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall or floor etc using synthetic rubber adhesive cement solvent complete all as specified and directed.

S&F in repairs for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall or floor etc using synthetic rubber adhesive cement solvent complete all as specified and directed.

S&F for 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F for 75mm dia PVC (SWR) junction single(single T) complete all as specified and directed.

S&F for 75mm dia PVC (SWR) branch piece single(single Y) equal or unequal complete all as specified and directed.

S&F for 75mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F for 110mm dia PVC (SWR) junction single(single T) complete all as specified and directed.

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed.

Rectifying the defects and removing the blockage of WHB, WC, sinks, urinals, floor, Nahani traps, gully trap, vertical CI pipe/PVC pipes of any dia (upto four story bldg),taking out (desludge) silt brick bats, debris,liquid waste sludge in solid semi-solid state from manhloles incl pumping the flow in the drain if necessary plugging, diverting the flow in the drain if necessary and stacking the removed slit away from the edges of manholes as directed incl use of safety belts dry cell tourch for lighting inside the manholes and taking precautionarty measure and removing the sludge to a distance exceeding 50m and not exceeding 250m and leaving the manhloles cleaned and flushed with water etc incl taking out and refixing the manholes covers etc in any depth and Removing of blockage in sewage lines in any length and systematically cleaning the same using necessary tools, mechanically and /or manually such as passing rope knots, bamboo kasui and disc of required size with the help of one plumber and one helper/safaiwala per day including Sunday & holiday i.e from 0900 hrs to 1700 hrs all as specified and directed by Engineer-in-charge. NOTE: (i) The unit rate quoted shall be demed to be included the elements of labour only for rectifying and making the fittings and fixture functional. If replacment of part/items is required to make the fitting functional,the cost for labour and material for the same will be measured and paid for as 'S&F in repairs' under relevent items of this schedule here in after and in such cases this item will not be measured and paid for.ii) The contractor will deploy minimum one plumber and one helper from 0900 Hrs to 1700 Hrs iii) Plumber and helper shall be employed all working days incl sundays and holidays they will report to JE(Civil) concern at 0900 Hrs at AGE B/R Office.iv) The unit rate quoted by the contractor shall be inclusive of working & attending the complaints as diected by Je(civil) or Engr in Charge.v) The plumber who is on duty must be provided with common mobile cell to faciliate and render good services to the users and the same shall be deemed to be included in the unit rate.vi) Complaints slip to be collected daily from complaints cell/AGE B/R Girinagar. vii)Contractor shall provided all tools/Ladder etc required for attending complaints with proper tool bag.viii) If individual remains absent on site,contractor shall make an alternative arrangment if contractor fails to make such arrangment recovery shall be made at Rs 1000/- for plumber and for Rs 750/- for helper/safaiwala per day.

S&F factory made 50mm thick 900 x 450mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) finished the surface even and fair including reinforcement as per manufacturer's design and set in CM 1:4 and handles including demolition of old existing RCC cover (Reinforcement required to cut as facilitate to domolition) of any description and in any position complete all as specified and directed.

S&F factory made 50mm thick 900 x 600mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) finished the surface even and fair including reinforcement as per manufacturer's design and set in CM 1:4 and handles including demolition of old existing RCC cover (Reinforcement required to cut as facilitate to domolition) of any description and in any position complete all as specified and directed.

Demolition of reinforced cement concrete (reinforced cut to required to facilitate demolition) in any description and in any position not otherwise specifically provided for including removing debris outside of Md land complete all as directed.

M & L for precast RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in cover slabs set in cement mortar (1:4) complete all as specified and as directed.(Note : Reinforcement to be measured and paid separately). complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate), as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating,complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for Framed MS work as in doors or gates of angle or other section with gusset plates, rails braces etc, complete drilled for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings also fastening and fixing complete with locking arrangement complete all as specified and directed.

M&L for Mild steel black sheet in door 1.60mm thick in steel gate and similar work cut to size, holes punched, including round headed screws, cut nails or revets and fixed to wood or steel framing with plain 40mm lap joints with reveted or welded seams including or turning up, mitred complete all as specified and directed.

M&L for preparing new steel surface of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Dismantling stone slab of any description or thickness in floors, approns etc complete all as specified and directed.

M&L for 30mm to 40mm thick rough dressed sahabad stone slab flooring bedded and jointed in cement mortar (1:6) and pointed in CM (1:3) complete all as specified and directed.

All as per Item Ser No 56.00 here-in-before but except sahabad stone.

M & L for 18 to 20 mm thick granite stone slab (of any type ) work (table rubbed and polished ) as in floor, gate/pillars/columns,steps, platform in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and making good for disturbed surfaces and chamfering for exposed edges,surfaces fixed in repairs all as directed . (Colour decided by Engr-in-Charge/GE)

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for 75 mm thick plain cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection all as specified and directed.

M&L for 100mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in flooring/hardstanding/path etc. or similar work using dewatering trimix method laid in alternate bay finished even and smooth without using extra cement including construction joint at each 2mtr interval. The Joint shall be filled with sealing compound Grade 'A' (to full depth) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling/ chequered tile/interlocking tile including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S&F for glossy finished chequered cement concrete tiles 30cmx30cmx30mm/20cm x 20cm x 25 mm (as approved) thick set jointed with grey cement and pigment and pointed in neat cement slurry with and including 15 mm thick screed bed of CM(1:6) in floors complete all as specified and as directed.

All as per item No 63.00 above but except tiles.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand incl fixing to the edges in CM (1:4) complete all as specified and as directed.

All as per item No 65.00 above but except paver blocks.

M&L for Road cutting and repair to disturbed road with PCC (1:2:4) type B2, 100 mm thick over and including 150 mm hard core of broken stone of gauge n exc 63 mm over rammed earth etc complete all including cutting of road portion complete all as specified and as directed.

Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc complete all as specified and as directed.

M&L for rendering 15 mm thick plaster in CM (1:6) on wall surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortor 1:6 complete all specified and directed.

All as per item No. 70.00 above but except stone.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge n.exc 20mm and dressing face beds and joints as specified to random rubble walling brought upto courses complete all specified and directed.

M & L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1: 4 complete all specified and directed.

Dismantling fencing wire mesh,any type complete all as specified and as directed.

Supply only, chain link fencing of MS galvanized fencing, any size or type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh , size and type fixed to any type of standards, rails, straining bolts, etc., including provision of binding wire complete all as specified and directed Note : Supply only chain link fencing and line wire will be measeured and paid separetly.

S&F mild steel round bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooking ends stiffeners confirming to FE-410-W ( Gde E 250) quality-A or Fe 290 (Gde E-165) complete all as specified and as directed.

M&L Mild steel flat iron fillets (for securing wire mesh) including all necessary drilling, bolting or riveting etc and similar work conforming to FE-290 Gde E-165 complete all as specified and as directed.

S&F in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt n exc 5cm long and dia of neck 11 to 15mm complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Excavating in posts holes (or similar holes) in hard/dense soil each n.exc 0.50 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm complete all as specified and as directed.

M & L for plain cement concrete in 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling or mass concrete or simillar work complete all as specified and as directed.

S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming complete all as specified and as directed.

Supply and fixing welded steel wire fabric weight nexc 4 kg per square meter complete to steel/wooden members any type of required iron fillets or necessary welding ( for securing wire mesh etc) including all necessary welding etc complete all as specified and directed.

M/S OMSAI ENTERPRISES

Sky Vision Construction