Construction of 4ACR (2GF+2FF) Work of school building At P.S. Gogchak, Block- Tarapur, District- Munger

Bihar State Educational Infrastructure Development Corporation Ltd.

Bill of Quantity for Construction of 4ACR (2GF+2FF) Work of school building At P.S. Gogchak, Block- Tarapur, District- Munger

Amount of B.O.Q. for Schedule Item (In Rs.) :- ₹ 9,653,514.00

Amount of E.M.D. (In Rs.) :- ₹ 193,000.00

Tender Fee- 10,000/- Time of Completion- 06 Months

Rate based on BCD SOR 2022 effective from 01.01.2022 & BCD ELE 2023

Sl . No. SOR Item No. Item of Work Unit Quantity Rate (Rs.) Amount (Rs.)

1 OL 01 Un Skilled labour to clean the site --- No. 2.00 410.00 820.00

2 2.8.1 Earth work excavation in Foundation trenches including dressing of sides and ramming of bottoms including getting out the excavated soil and disposal of surplus excavated soil within a lead of 50 mt do - do all complete job --- M3 137.40 360.70 49,560.00

3 2.28 Supplying and Filling in foundation trenches with Local Sand and dressing do - do all complete job --- M3 94.88 281.40 26,699.00

4 11.72 Providing Bricks designation 100 A one Brick flat soling in foundation trenches, joints filled with local sand do - do all complete job --- M2 225.88 283.30 63,992.00

5 5.1.2 Providing and laying in position cement concrete of specified grade P.C.C. work (1:4:8) exluding the cost of centring and shuttering do - do all complete job --- M3 38.21 4688.30 179,140.00

6 6.1.12/1 Brick work with bricks of class designation 100A in Foundations and plinth in Cement mortar (1:4) do-do all complete job --- M3 25.35 5017.90 127,204.00

7 4.11 Providing R.C.C. work (1:1.5:3) in Plinth Band excluding the cost of centring, shuttering, finishing and reinforcement do - do all complete job --- M3 19.48 4688.30 91,328.00

8 1549 Providing G.I. pipes 40 mm dia in Ramp railing do - do all complete job --- Mtr 4.78 290.00 1,386.00

9 5.2.2 Providing R.C.C. work (1:1.5:3) in Columns excluding cost of centring, shuttering, finishing and reinforcement do - do all complete job --- M3 69.28 5670.00 392,818.00

10 6.18.4A + 6.19A Providing Half brick masonry with bricks of class designation 100A in Cement mortar (1:4) in superstructure do - do all complete job --- M2 20.35 689.00 14,021.00

11 6.1.14A + 6.3A Providing Brick work with designation 100A in Cement mortar (1:6) in Super - Structure above plinth level do - do all complete job --- M3 63.62 5662.10 360,223.00

12 13.24.2 + 13.26 + 13.70.1 Providing 6 mm cement plaster on Roof level of mix (1:4) with neat cement punning and three coat of white washing with lime do - do all complete job --- M2 38.96 185.00 7,208.00

13 10.17 Providing and fixing MS Fan clamp of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop as per standard design do - do all complete job --- No. 20.00 174.60 3,492.00

14 13.11.1 + 13.36.1 Providing 12 mm thick cement plaster of mix (1:3) with mixing Water proofing material in required proportion do - do all complete job --- M2 284.20 173.30 49,252.00

15 5.22.7A Providing Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding do - do all complete job --- Kg 7501.50 94.50 708,892.00

16 12.80.1 Providing and fixing 75 mm U-PVC pipe as Rain water pipe by means of (50x50x50) mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) and making good the wall do - do all complete job --- No. 8.00 184.10 1,473.00

17 10.5.1 Providing and fixing 1 mm thick MS sheet door and window with frame of 40x40x6 mm angle and 3 mm MS gusset plates at the junction and corners all necessary fittings complete including applying a priming coat of approved steel primer using flats (30x6) mm for diagonal braces and central cross piece do - do all complete job --- M2 22.86 3653.00 83,508.00

18 9.48.1 Providing and fixing MS grills of required pattern in frames of windows etc. with MS square of 10 mm including priming coat with approved steel primer and to fix steel windows by welding do - do all complete job --- Kg 174.00 144.50 25,143.00

19 13.13.2 + 13.26 Providing 20 mm cement plaster of mix (1:4) with neat cement punning for Black board do - do all complete job --- M2 17.84 250.40 4,467.00

20 13.11.4 Providing 12 mm Cement plaster of mix (1:6) do - do all complete job --- M2 898.85 141.50 127,187.00

21 13.11.4 + 13.26 Providing 12 mm cement plaster of mix (1:6) with Neat cement punning do - do all complete job --- M2 42.21 182.00 7,682.00

22 13.24.2 Providing 6 mm cement plaster to ceiling of mix (1:4) do - do all complete job --- M2 318.63 125.60 40,020.00

23 4.1.3 Providing and laying in position cement concrete of specified grade P.C.C. work (1:2:4) exluding the cost of centring and shuttering do - do all complete job --- M3 6.65 3998.10 26,587.00

24 11.26.1 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing do - do all complete job --- M2 332.82 1252.70 416,924.00

25 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm average thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing do - do all complete job --- M2 24.23 1334.90 32,349.00

26 7271 Providing 2nd class Teak wood lipping 25 mm wide x 12 mm thick fix it by screw at lintel level in class room for chart paper presentation do - do all complete job --- Mtr 45.73 33.93 1,552.00

27 13.80A.2 Providing two or more coats of Distempering with dry distemper over one coat of Distemper primer on new work including priming coat of whiting to give an even shade do - do all complete job --- M2 808.46 105.40 85,212.00

28 13.78.1 + 13.79.1 Providing three coats of Water proofing cement paint over one coat of cement primer on well finished walls in required shade for outer part plaster do-do all complete job --- M2 408.82 119.80 48,977.00

29 13.94.1 Applying Two coat painting over one coat of primer with synthetic enamel paint of required colour to give an even shade on steel works do - do all complete job --- M2 59.15 116.50 6,891.00

30 5.9.5 Centring and shuttering including strutting,propping and removal of form for Grade beam, Plinth band, Lintels, Lintel bands, plinth bands etc. do - do all complete job --- M2 295.92 404.70 119,759.00

31 5.9.6 Centring and shuttering including strutting,propping and removal of form for Columns do - do all complete job --- M2 86.47 494.40 42,751.00

32 5.9.3 Centring and shuttering including strutting,propping and removal of form for Chejja, Roof slab etc do - do all complete job --- M2 297.58 437.50 130,191.00

33 5.9.7 Centring and shuttering including strutting,propping and removal of form for Stairs do - do all complete job -- M2 33.83 439.90 14,882.00

A Sub Total 3,291,590.00

Electrical Works

Sub Head (A) - Wiring

34 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required.

a Bulb Point 12

b Tube Light Point 8

c Ceiling Fan Point 16

35 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. Each 4 531.00 2,124.00

36 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Mtr 40 201.00 8,040.00

1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Mtr 28 309.00 8,652.00

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Mtr 16 422.00 6,752.00

37 1.22 Supplying and fixing metal/ PVC box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 0.00

Sub Head (B) - Main Panel & D.B.s

5 2.8.7 Supplying and fixing 2 + 12 way,Single phase Double door horizotal type three pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus-bar,earth bar, din bar, inter connections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Each 0 2,314.00 0.00

38 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.1 6/32 amps, Single pole MCB 240 Volts Each 2 237.00 474.00

2.12.4 6/32 amps, Single pole and neutral MCB 240 Volts Each 0 1,282.00 0.00

7 2.20 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel at least 2 mm thick, vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Each 0 214.00 0.00

Sub Head "C" - Earthing

8 3.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal / coke and salt as required. Set 1 6,323.00 0.00

9 3.12 Supplying and laying earth connection from earth electrode with 6 SWG dia G.I. wire in 15 mm dia G.I. pipe from earth electrode including connecion with G.I. thimble excavation and refilling etc. as required. Mtr 10 278.00 0.00

10 3.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing etc. as required. Mtr 10 53.00 0.00

39 2105 Supplying of 12 watt LED Lamp. Each 12 160.00 1,920.00

40 2111 Supplying of 15 watt LED Tubelight Each 8 350.00 2,800.00

41 2321 Regular/standard make 1200 mm sweep ceiling fan. Each 16 1,650.00 26,400.00

B Say Rs. 100000.00

42 20.3A.1 Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soil and disposal of the excavated earth up to 50 mtr Lead including all lifts do - do all complete job --- Mtr 165.854 178.300 29571.707

43 5.1.3 Providing and laying in position with 1:2:4 grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement do - do all complete job --- M3 8.452 4232.400 35772.763

44 2.8.1 Earth work excavation in Foundation trenches including dressing of sides and ramming of bottoms including getting out the excavated soil and disposal of surplus excavated soil within a lead of 50 mt do - do all complete job --- M3 5.900 360.700 2128.174

45 2.28 Supplying and Filling in foundation trenches with Local Sand and dressing do - do all complete job --- M3 2.950 281.400 830.147

46 11.72 Providing Bricks designation 100 A one Brick flat soling in foundation trenches, joints filled with local sand do - do all complete job --- M2 38.724 283.300 10970.415

47 5.1.2 Providing R.C.C. work (1:1.5:3) in Grade beam excluding the cost of centring, shuttering, finishing and reinforcement do - do all complete job --- M3 9.834 4688.300 46102.576

48 6.1.14A + 6.3A Providing Brick work with designation 100 A in Cement mortar (1:6) in Super - Structure above Grade beam do - do all complete job --- M3 80.936 5662.100 458267.255

49 5.2.2 Providing R.C.C. work (1:1.5:3) in Columns excluding cost of centring, shuttering, finishing and reinforcement do - do all complete job --- M3 14.003 5670.000 79396.771

50 4.1.3 Providing and laying in position cement concrete of specified grade P.C.C. work (1:2:4) exluding the cost of centring and shuttering do - do all complete job --- M3 2.879 3998.100 11511.569

51 9.48.1 Providing and fixing MS grills of required pattern in frames of windows with MS flat of (20x6) mm including priming coat with approved steel primer do - do all complete job --- kg 3382.000 144.500 488699.000

52 5.22.7A Providing Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete job --- Kg 2924.571 94.500 276372.006

53 13.11.4 Providing 12mm thick cement plaster in C.M (1:6) do - do all complete job --- M2 786.741 141.500 111323.854

54 13.78.1+ 13.79.1 Providing two coats of snowcem over a coat of cement primer do - do all complete job --- M2 786.741 119.800 94251.574

55 5.9.5 Centring and shuttering including strutting,propping and removal of form for Grade beam, Plinth band, Lintels, Lintel bands etc. do - do all complete job --- M2 61.958 404.700 25074.349

56 5.9.6 Centring and shuttering including strutting,propping and removal of form for Columns do-do all complete job --- M2 121.190 494.400 59916.134

57 20.3A.1 Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soil and disposal of the excavated earth up to 50 mtr Lead including all lifts do - do all complete job --- Mtr 45.579 178.300 8,126.784

58 20.3A.2 Making 63 cm (25) dia under ream at required depth with hand auger of approved quality in ordinary soil and disposal of the excavated earth up to 50 mts lead including all lifts do - do all complete job --- No. 13.000 190.200 2,472.600

59 5.1.2 Providing R.C.C. work (1:1.5:3) in Pile excluding the cost of centring, shuttering, finishing and reinforcement do - do all complete job --- M3 2.974 4688.300 13,945.052

60 2.8.1 Earth work excavation in Foundation trenches including dressing of sides and ramming of bottoms including getting out the excavated soil and disposal of surplus excavated soil within a lead of 50 mt do - do all complete job --- M3 0.673 360.700 242.825

61 2.28 Supplying and Filling in foundation trenches with Local Sand and dressing do - do all complete job --- M3 0.517 281.400 145.608

62 11.72 Providing Bricks designation 100 A one Brick flat soling in foundation trenches, joints filled with local sand do - do all complete job --- M2 6.792 283.300 1,924.211

63 4.1.6 Providing P.C.C. work (1:4:8) in Foundation trenches excluding the cost of centring, shuttering and finishing do - do all complete job --- M3 0.078 2975.200 231.713

64 5.1.2 Providing R.C.C. work (1:1.5:3) in Grade beam excluding the cost of centring, shuttering, finishing and reinforcement do - do all complete job --- M3 1.343 4688.300 6,294.538

65 6.1.12/1 Providing Brick work with designation 100A in Foundation and Plinth in Cement mortar (1:4) do - do all complete job --- M3 2.052 5017.900 10,295.072

66 6.18.4A + 6.19A Providing Half brick masonry with bricks of class designation 100A in Cement mortar (1:4) in superstructure do - do all complete job --- M2 2.680 689.000 1,846.298

67 5.2.2 Providing R.C.C. work (1:1.5:3) in Column excluding cost of centring, shuttering, finishing and reinforcement do - do all complete job --- M3 1.298 5670.000 7,359.813

68 4.11 Providing and laying Damp-Proof Course 50 mm thick with cement concrete (1:2:4) at Plinth level do - do all complete job --- M2 6.609 245.600 1,623.131

69 2.28 Supplying and Filling in plinth with Local Sand under floors including, watering, ramming consolidating and dressing do - do all complete job --- M3 9.601 281.400 2,701.631

70 5.2.2 Providing R.C.C. work (1:1.5:3) in Column excluding cost of centring, shuttering, finishing and reinforcement do - do all complete job --- M3 1.007 5670.000 5,709.431

71 6.1.14A + 6.3A Providing Brick work with designation 100A in Cement mortar (1:6) in Super - Structure above plinth level do - do all complete job --- M3 13.987 5662.100 79,197.063

72 13.24.2 + 13.26 + 13.70.1 Providing 6 mm cement plaster on Roof level of mix (1:4) with neat cement punning and three coat of white washing with lime do - do all complete job --- M2 6.609 185.000 1,222.635

73 5.2.2 Providing 75 mm R.C.C. work (1:1.5:3) in Chhejja excluding cost of centring, shuttering, finishing and reinforcement do - do all complete job --- M3 0.170 5670.000 963.466

74 5.2.2 Providing 63 mm R.C.C. work (1:1.5:3) in Rack excluding cost of centring, shuttering, finishing and reinforcement do - do all complete job --- M3 0.647 5670.000 3,668.755

75 5.2.2 Providing 125 mm thick R.C.C. work (1:1.5:3) in Roof slab excluding cost of centring, shuttering, finishing and reinforcement do - do all complete job --- M3 3.962 5670.000 22,464.157

76 10.17 Providing and fixing MS Fan clamp of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop as per standard design do - do all complete job --- No. 4.000 174.600 698.400

77 13.11.1 + 13.36.1 Providing 12 mm thick cement plaster of mix (1:3) with mixing Water proofing material in required proportion do - do all complete job --- M2 31.204 173.300 5,407.572

78 5.22.7A Providing Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding do - do all complete job --- Kg 784.676 94.500 74,151.918

79 12.80.1 Providing and fixing 75 mm U-PVC pipe as Rain water pipe by means of (50x50x50) mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) and making good the wall do - do all complete job --- No. 2.000 184.100 368.200

80 10.4 Providing and fixing 1 mm thick MS sheet door and window with frame of 40x40x6 mm angle and 3 mm MS gusset plates at the junction and corners all necessary fittings complete including applying a priming coat of approved steel primer using flats (30x6) mm for diagonal braces and central cross piece do - do all complete job --- M2 12.268 4279.900 52,504.349

81 9.48.1 Providing and fixing MS grills of required pattern in frames of windows with MS flat of (20x6) mm including priming coat with approved steel primer do - do all complete job --- Kg 126.000 144.500 18,207.000

82 13.11.4 Providing 12 mm Cement plaster of mix (1:6) do - do all complete job --- M2 140.706 141.500 19,909.944

83 13.11.4 + 13.26 Providing 12 mm cement plaster of mix (1:6) with Neat cement punning do - do all complete job --- M2 11.323 182.000 2,060.750

84 13.24.2 Providing 6 mm cement plaster to ceiling of mix (1:4) do - do all complete job --- M2 32.053 125.600 4,025.841

85 11.72 Providing Bricks designation 100 A one Brick flat soling in foundation trenches, joints filled with local sand do - do all complete job --- M2 21.004 283.300 5,950.353

86 11.26.1 Providing 52 mm thick Cement concrete flooring with metallic concrete hardener topping under layer 40 mm thick cement concrete (1:2:4) and top layer 12 mm thick metallic concrete hardener consisting of mix (1:2) do-do all complete job --- M2 0.929 472.000 438.662

87 13.80A.2 Providing three coats of White washing with lime to give an ever shade for Internal part plaster only do - do all complete job --- M2 105.266 18.900 1,989.535

88 13.78.1 + 13.79.1 Providing three coats of Water proofing cement paint over one coat of cement primer on well finished walls in required shade for outer part plaster do-do all complete job --- M2 67.493 119.800 8,085.634

89 13.81.3 Providing Two coat painting over One coat primer with ready mixed zinc chromate yellow Primer with synthetic enamel paint of required colour to give an even shade on steel works do-do all complete job --- M2 35.409 116.500 4,125.139

90 5.9.5 Centring and shuttering including strutting,propping and removal of form for Grade beam, Plinth band, Lintels, Lintel bands etc. do-do all complete job --- M2 22.532 404.700 9,118.705

91 5.9.6 Centring and shuttering including strutting,propping and removal of form for Columns do-do all complete job --- M2 10.223 494.400 5,054.275

92 5.9.3 Centring and shuttering including strutting,propping and removal of form for Chejja, Roof slab etc do-do all complete job --- M2 40.002 437.500 17,500.678

D TOTAL 400,031.737

93 24.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge , upto 90 metre depth below ground level. ( All types of soil)

94 24.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC (UPVC) medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc, all complete for all depths, as per direction of Engineer - in-charge. 0.000

95 24.4 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC (UPVC) medium well casing (RMS) pipe with ribs, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc, all complete for all depths, as per direction of Engineer - in-charge. 0.000

Supplying, fitting & fixing the following fitting of approved make and specification at work site complete job. 0.000

97 24.14.2 (b) 150 mm dia M.S. Clamp 1.6 M long (one Pair) No 1.000 1531.400 1,531.400

(c) 150 mm dia center guide No 4.000 281.800 1,127.200

(d) 100 mm dia center guide No 4.000 228.300 913.200

(e) 150 mm x 100 mm dia 6mm wall thickness MS reducer No 1.000 500.000 500.000

(f) 100 mm dia 6mm wall thickness M S well shoe plug No 1.000 200.000 200.000

98 24.8 Gravel packing in tubewell construction in accordance with IS:4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. M³ 6.000 1343.200 8,059.200

99 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water sample & getting tested in approved laboratory, disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Hours 20.000 916.800 18,336.000

100 Transportation of drilling plants, developing equipments & all other required tools and M/c by and suitable mechanical means including all cost of loading, unloading, placing at work site and back after completion of work as per E/I No 1.000 9200.000 9,200.000

101 Supply, Installation , commissioning and testing of single phase 1 H.P submersible pump set having dischargeing capacity 1.5 Lps at a total head of 35 meter (approx) of KSB/ Kirloskar or equivalent make with all accessories & fittings etc including loading unloading and transportion of the pump set to the work site with all required labour, materials , tools and tackles installation , testing & commissioning as per standards specifications and direction of E/I No 1.000 12000.000 12,000.000

102 (i) 40 mm dia x m mtrs long medium class CPVC column pipe bothend threaded and one end socketed - 6 Nos. (ii) 1x3x1.5 mm² flat copper conductor submersible cable - 40 mtrs. (iii) 40 mm dia union socket - 1 No. (iv) 50 mm dia x 250 mm long CPVC nipple - 1 No. (v) 40 mm dia CPVC Elbow - 1 No. (vi) 40 mm dia M.S clamps - 2 Pairs. (vii) 40 mm dia x 250 mm long CPVC nipple - 1 No. (viii) Tubewell cap for 125 mm dia T/Well - 1 No. (ix) 40 mm x 50 mm dia reducer socket - 1 No. Nos 1.00 3000.000 3,000.000

103 Supply, Installation , commissioning and testing of floor mounted outdoor type L.T feeder pillar single phase starter controll pannel operated on 220 V , 3 phase , 50 c/s for 1HP Submersible pump set made of MS sheet ( minimum 2 mm thick) duly spary power coated painting with following accessories . (i) Suitable single phase starter control panel for above motor of BCH/ L&T make - 1 No. no 1.00 3000.000 3,000.000

104 Supplying and fitting 2.5 mm² copper service cable from power point nearest source up-to pumping station. M 20.000 130.00 2,600.000

105 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. 0.000

18.9.4 32 mm nominal outer dia Pipes M 30.000 359.100 10,773.000

106 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 0.000

18.7.4 32 mm nominal outer dia Pipes M 18.000 395.200 7,113.600

18.7.2 20 mm nominal outer dia Pipes M 18.000 233.900 4,210.200

107 18.15 Providing and fixing brass bib cock of approved quality : 0.000

108 18.16 Providing and fixing brass stop cock of approved quality : 0.000

18.16.2 20 mm nominal bore Nos 1.000 328.000 328.000

109 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. L 1000.000 9.700 9,700.000

110 2.8.1 Earth work in excavation in foundation trenches (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. M³ 6.426 360.700 2,317.820

111 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. M³ 0.661 281.400 185.953

112 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royality all complete as per building specification and direction of E/l, M² 8.674 283.300 2,457.373

113 4.1.6 Providing PCC 1:3:6 (1 Cement; 3 coarse sand :6 graded stone aggregate 40 mm nominal size) in foundation excluding the cost of centring and shuttering-all work upto plinth level M³ 1.048 3279.800 3,436.777

114 6.1.12/1 Providing Brick work with bricks of class designation 100A in Cement mortar 1:4 (1 cement: 4 coarse sand ) in foundations and plinth . M³ 2.229 5017.900 11,185.232

115 6.18.4A Providing 125 mm thick brick masonry with bricks of class designation 100A in wall in Cement mortar 1:4 (1 cement: 4 coarse sand). M² 13.683 599.300 8,200.087

116 5.1.2 Providing Reinforced cement concrete work in 1:1.5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size in Cover Slab excluding cost of centring, shuttering, finishing and reinforcement. M³ 0.203 4688.300 949.578

117 5.22.7A Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Kg 14.304 94.500 1,351.683

118 13.11.1 +13.26 +13.36.1 Providing 12 mm cement plaster of mix 1:3 (1 cement: 3 coarse sand) with 5 % Water proofing materials and neat cement punning M² 0.994 213.800 212.497

119 13.11.4 Providing 12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand) in walls M² 27.326 141.500 3,866.629

120 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. M² 24.538 795.000 19,507.629

121 11.20.3 Chequerred precast cement concrete tiles 22 mm thick with marble chips of size 6 mm in plateform jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. Complete on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) M² 2.788 766.700 2,137.639

BENCH-DESK / FURNITURE

122 Supplying & Installing of 3 Seater Class Room Desk cum Bench combines the elegance of wood with the strength of steel. Its ergonomically designed to minimize fatigue. This three seater model is best suited for schools and colleges. Dimension-1500 x 895 x 750(Appx ) Desk panel Seat, Back-The panels are made from 18 mm thk Pre Laminated Boards with PVC edge banding on all sides, Understructure-Made of 25.4 x 25.4 mm x1.2 mm thick powder coated ERW tubes at base which are welded to the desk and seat supports that are made of 1.0 mm thk powder coated MS 'C' sections Stiffeners tat are provided between the 2 vertical frames at base and back of seat are made from 25.4 x25.4 x1.2 mm thk powder coated ERW tubes. The tubes are closed with plastic caps. Additional horizontal supports of 1.5 mm thk powder coated MS 'C' sections are placed below the desk and seat to add to the rigidity of the structure. The storage shelf is made from 0.8 mm thk powder coated MS sheet which is affixed below the desktop Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles They are made from 6.0 mm dia MS rods. Level adjustors are provided to take care of unevenness in floor, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / ZUARI) as per direction of Engineer-in-charge. EACH 110.000 10411.000 1,145,210.000

123 Supplying & Installing of Table Model T-8 Made of made of MS ERW round tube dia 25.4 x 1.2mm thick with 25mm thick Pre Laminated top size 4' x 2' with one side three drawer unt made of .5mm thick CIRCA sheet mild steel, All steel components have powder coated paint fitted with lock, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / ZUARI) as per direction of Engineer-in-charge. EACH 1.000 10064.000 10,064.000

124 Supplying & Installing of Bravo Mid Back Chair with seat and back are made up of 1.2 cm thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Dimension BACK SIZE - 47.5 cm. (W) x 58.0cm. (H) & SEAT SIZE 47 0 cm. (W) x 48.0 cm. (D). POLYURETHANE FOAM: The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +1- 2 at 25% compression 3) ARMRESTS The one-piece armrests are injection moulded from black Co-polymer Polypropylene. 4) CENTER TILT SYNCHRO MECHANISM, PNEUATIC HEIGHT ADJUSTMENT, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / ZUARI) as per direction of Engineer-in-charge. EACH 1.000 7800.000 7,800.000

125 Difference Rate cost of Labour / Mason

Sub Total 235,540.08

127 Difference cost of material

a Bricks Thousand 102.71 359.04 36,877.00

Sub Total 44,508.68

Actual carriage cost from source to district head quarter ---

128 a Bricks Thousand 102.710 958.51 98,449.00

Sub Total 9,148,745.79

Add 5.36 % for GST as per BCD Letter No.5751,dt.18.07.2023 490,372.77

Sub Total 9,639,118.57

129 Calculation of Seigniorage Fee

Sub Total 14,395.00

Says Rs 9,653,514.00

ELECTRICAL WORKS FOR 10+2 SCHOOL AT MIDDLE SCHOOL BARAHI RAFIGANJ,AURANGABAD

Based on D.S.R (ELECTRICAL) 2014

Sl. No. Sub N. SOR Ref.N. DESCRIPTION Quantity Unit Rate (incl. 1% Labour Cess) Amount (Rs.)

(1) For Internal electrical wiring work, only ISI marked material of make given aginst their name shall be used

(a) PVC insulated copper Conductor cable - Havell's/ Finolex/ Anchor make.

(b) PVC Conduit of thickness 1.5 mm/ 2 mm for surface reesed wiring - Polycab/ Kinjal/ Marshall/ make

(c) Switches/ Socket outlets -- Anchor/ Cona/ CANY make

(2) Unless and otherwise specified only I.S.I maked material shall be used.

1 1.8 Wiring for light point /fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required.

2 1.11 Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI. Box and earthing the point with 1.5 sq. mm. FR PVC insulated copper conductor single core cable etc as required. 6 Point 770.00 4,620.00

3 1.12 Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 290 mtr. 162.00 46,980.00

4 1.14 Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required.

1.14.3 2 x 4 sq.mm + 1 x 4 sq. mm earth wire 290 mtr. 162.00 46,980.00

5 1.14 Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required.

1.14.9 4 x 6 sq.mm + 2 x 6 sq. mm earth wire 80 mtr. 389.00 31,120.00

6 1.18 Supplying and drawing following pair 0.5 sq.mm. FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

7 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed steel / PVC conduit as required. 50 mtr. 28.00 1,400.00

8 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

9 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet. 46 Each 79.00 3,634.00

10 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.6 Telephone socket outlet 2 Each 95.00 190.00

11 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.7 TV antenna socket outlet 2 Each 94.00 188.00

12 1.29 Supplying and fixing metal box of 150mm x 75mm x 60mm deep (nominal size) on surface on in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). 82 Nos. 194.00 15,908.00

13 2.8 Supplying and fixing following way prewired vertical type TP&N MCB distribution board of steel sheet for 415 volts on surface / recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size of FR PVC insulated copper conductor for upto the terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

14 3.2 Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on exinsing rising mains complete with PPN disconnector FSU AND HRC fuses, connections, earthing etc as required.

15 3.2 Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on exinsing rising mains complete with PPN disconnector FSU AND HRC fuses, connections, earthing etc as required.

16 3.2 Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on exinsing rising mains complete with PPN disconnector FSU AND HRC fuses, connections, earthing etc as required.

17 5.6 Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. 4 Nos. 8,939.00 35,756.00

18 2349 Straight through cable jointing kit with cast resin compound with ferrules for 3.5 x 25 sq.mm. 1.1 KV grade cable. 1 set. 1,016.40 1,016.40

19 7.10 Laying of One number Pvc insulated and Pvc Shelthed/XLPE power cable of 1.1KV grade of following Size direct in ground including excavation ,Sand cushioning,Protective Covering and refilling the trench etc as required.

Total Cost = 414,222.40