PROVN OF DEFI PLATE RACKS AND WHB IN JCOS OR MD ACCN AT BS MARG SANJOG CHHETR VIHAR AND PROVN OF CHAIN LINK FENCING RAIN WATER SHED AT 25B MVG AND ADDN ALTN OF FALSE CEILING AT 16 RAJPUT OFFRS MESS UNDER GE EAST LUCKNOW

Amount

S&F of stainless steel kitchen plate rack of overall size 750 mm x 600 mm x250 mm, with partitions for small and large plates etc made out of stainless steel 0.63 mm thick fixed with rawl plugs and CP steel screws complete all as specified and as directed.

S&F steel water GI tubing 15mm dia medium grade, with all fittings complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F steel water GI tubing 20mm dia medium grade, with all fittings complete to walls and ceilings or laid in floors including taking down of existing GI/PVC pipe and connected to existing pipe/tank up to 2 storied height complete all as specified and directed.

Cutting chases pining in brick, concrete walls built in cement mortar or cement lime mortar making good to facings where required and pointing in cement mortor 1:3 to ends or edges of shelves lintels etc and cutting chases for concealed water tubing cutting not exc 10 cm girth complete all as specified and directed.

S&F viterous china wash hand basin white flat black type of size 550x400mm including cutting for and pinning in ends of brackets and fixing in walls including brackets complete all as specified and directed.

S&F viterous china Corner wash hand basin white flat black type of size 400x400mm including cutting for and pinning in ends of brackets and fixing in walls including brackets complete all as specified and directed.

S&F 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F 15mm bore angle valve/stop valve chromium plated fancy type cast copper alloy screwed down high pressure, crutch or butterfly handle, screwed both end for pipe or for unions complete all as specified and directed.

S&F 32 mm bore Low density PVC flexible pipe for wash hand basin/sink etc complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F 32mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement complete all as specified and directed.

S&F 50 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 50 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 thick sheet glass shelf 12cm wide with CP bracket gaurd & railing 60cm long complete all as specified and directed.

S&F 100mm dia CP grating with waste pipe hole complete all as specified and directed.

M&L for Glazed ceramic couloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match & Screed bed or bedding layer of mortar 10 mm thick in CM (1:4) for laying floor finishes. complete all as specified and as directed.

M&L for Non - skid Ceramic Coloured tiles joint free 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes. complete all as specified and as directed.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. & Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed.

Demolition of cement concrete of any description from sunken floors complete all as specified and directed.

M&L for mass concrete filling using PCC (1:4:8) type D-2 in sunken floor complete all as specified and directed.

M&L for 20mm thick cement plaster in CM 1:4 mixed with water proofing compound @ 3% and applying water proofing treatment on sunken portion with acrylic based polymer modified cementitious composit compound as specified and approved & cement slurry two layers, Ist layer @ 0.488 Kg/Sqm mixed with composit compound @ 0.253 Kg/Sqm & the second layer slurry @ 0.242 kg/Sqm mixed 0.126 Kg of compound complete with min 4 hours allowed to air cure between these layers and applying 200 u polyfilm with adhesive. complete all as specified and as directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floors complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and directed.

Surface dressing not bexc 15cm deep soft/loose soil complete all as specified and directed.

M&L hard core of gauge n exc 63mm, deposited spred and levelled (broken red brick) in layers n exc 15 cm thick ,warered and rammed to a true surface.complete all as specified and directed.

M&L for 100mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified & directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in soft/loose soil complete all as specified and directed.

M&L Cement concrete1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass-concrete complete all as specified and directed.

S&F mild steel joist, channel, angle, or tee sections as in posts fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410-W (Gde E-250) complete all as specified and directed.

S&F for mild steel as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of FE410-W (Gde E-250) complete all as specified and directed.

Supply Chain Link MS galvanised fencing of any size and type complete all as specified and directed.

Fixing only chain link fencing line wire , any mesh size and type of standards , rails , straining bolts , etc inc provision of binding wire staples or steel pins etc complete all as specified and directed.

S&F MS Screw bolts (machine made) dia of neck 5 to 10mm with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n exc 5 cm long.complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for brick work with sub class B bricks, straight or curved on plan any radius half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

S&F 2mm thick Colored Fibre glass reinforced translucent plain sheeting fixed with coach screw and washer in roof, wall etc wall fixing with self tapping screw complete all as specified and directed.

S&F for false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) False ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2% , humidity S&F for fully perfortated 12mm thick micro tegularedged or 10mm thick squre edged GRG(Glass Fibre Reinforced Gypsum) false ceilijng tiles at all heights with GRC false ceiling tiles of size 595x595 mm of approved texture design and patterns having moisture content less than 2%, humidity resistance of 99% NRC 0.50 to 0.75 as per IS 8225:1987. Noncmbustible as per BS476(para4 )-1970 and light reflectance of 85% ( minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15x32mm of length 1200 mm and 3000 mm, cross-T of size 15x 32 mm of length 1200 mmand secondary intermediate cross-T of size 15x32 mm of length 600 mm to from grid module of size 600x600mm, suspended from ceiling using galvanizedmild steel items (galvanized @ 80 grams per sqm) i.e 50mm long 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level aduster of length and L- shape leveladjuster of size 85x25x2 mm Galvanised iron perimeter wall angle of size 24x24x0.40 of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center and 40mm long dry wall wood screw. The work shall be carried out as per direction of the Engineer-in-Charge complete all as specified and directed.

S&F for 12 mm thick plain Gypsum board false ceiling with GI frame work including all necessary drilling, cutting to fix electrical items as under:- (a) GI Sheet channel 30x25x20mm of 24 Gauge fixed with raql plug and screws 450mm centre to centre along with perimeter of walls (b) GI Sheet channel made to shape 50x40x40mm of 24 gauge placed @ 600mm centre to centre alongwith perimeter of wall except long wall (in one span) (c) GI Sheet intermediate runner of size 45x10x10xmm of 24 gauge fixed @ 1200mm centre to centre to centre leveling frame of one side wall (in one span) (d) GI sheet 25mm wide & 20mm gauge suspenders fixed with steel fasteners to roof ceiling @ 1200 mm centre to centre incl plugging in RCC slab. Fixing of 12 mm thick gypsum boards, filling joints with P.O.P and finshing complete with two coat of plastic emulsion paint over a one coat of primer on ceiling complete all as specified and directed.

Taking down chawkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n. exc 4 sqm each and removing from site complete all as specified and directed.

S&F powder coated aluminium anodised frame/chowkat of Alu door fixed with rawal plug and screw or wire expansion hold fasteners complete all as specified and directed.

S&F for Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

M&L for 12 mm thick prelaminated particle board, interior grade prelaminated both sides with decorative choice laminations fixed with screws toaluminium frame work fixed complete all as specified & directed.

S&F 4.8 mm thick sheet glass ordinary quality and glazing exc 0.5 sqm in each pane complete all as specified and directed.

S& for 1.5 mm thick powder coated anodized aluminum partition wall partly paneled and partly paneled and partly glazed size of aluminium section 44x44x1.5 to 1.8 mm thickness divided into square or rectangular (not exc. 1.20 Sqm each panel ) in shape top panel shall be glazed with 5.50mm thick sheet glass any shade and design make modi/ saint gobin & bottom panel shall be 12mm thick prelaminated particle board exterior grads with both side choise lamination including necessary joining cleats glazing clips rubber packing, anodized aluminum snap beading screws complete all as specified and directed.

Taking down carefully copper/aluminium point wiring ( light, fan, socket , bell or power) complete including all electrical fittings & fixtures(DBs,submain,cables etc) complete all as specified and directed. by Engineer-in-charge.

Taking down carefully Ceiling fan/Wall fan/Ex-fan incl all electric connection and refixing after two coat of enamel paint refixing the same if serviceable after completion of wiring including suitable connected items complete all as specified and directed. by Engineer-in-charge.

Material and Labour for point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduit with accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP complete all as specified and directed. Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall complete all as specified and directed.

All as per Item No 50 hereinbefore but for One 5 A socket outlet on independent Board complete all as specified and directed.

All as per Item No 50 hereinbefore but for One 5 A socket outlet on same Board complete all as specified and directed.

All as per Item No 50 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor complete all as specified and directed.

Supply and fix frame plate with match cover twelve module complete all as specified and directed.

All as per item No.54 above but three module complete all as specified and directed.

All as per item No.54 above but four module complete all as specified and directed.

All as per item No.54 above but six module complete all as specified and directed.

All as per item No.54 above but eight module complete all as specified and directed.

Supply and fix terminal box suitable twelve modular plat of size 75X75x50 mm including cutting, grooving and plastering etc complete all as specified and directed.

All as item No 59 above but three modular plat of size 100X75x50 mm including cutting, grooving and plastering etc complete all as specified and directed.

All as item No 59. above but four modular plat of size 128X75x50 mm including cutting, grooving and plastering etc complete all as specified and directed.

All as item No 59. above but six modular plat of size 210X75x50 mm including cutting, grooving and plastering etc complete all as specified and directed.

All as item No 59. above but eight modular plat of including cutting, grooving and plastering etc complete all as specified and directed.

Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module complete all as specified and directed.

Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module complete all as specified and directed.

Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all complete all as specified and directed.

Supply and fix Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module complete all as specified and directed.

Supply and fix Modular Regulator 230V AC 50 HZ SP two module complete all as specified and directed.

Supply and fix in repair of MCB DB SPN 8 way double door type suitable for TP/FP including necessary dummy plate and necessary civil works complete all as specified and directed.

Supply and fix MCB SP 230V, 6-32 Amps capacity complete all as specified and directed.

Supply and fix MCB SPN 230V, 32 to 63 Amp capacity complete all as specified and directed.

S&F Ceiling rose PVC polycarbonate complete all as specified and directed.

S&F in replacement surface/ceiling mounting LED down lighter of 12 to 15 watt warm white/white colour square shape white powder coated CRCA housing with LED seamless front frame with flat white high transmission acrylic cover complete all as specified and directed .

Supply and fixing recess mounting LED light fitting 2'x2' luminaire architectural recessed luminaire with CRCA housing and Molded PC diffuser with an unique angular optics for making the illumination easy on eyes for light comfort in office areas with UGR<=19. The luminaire should have a color consistency SDCM< 5, CRI > 80 and choice of CCT: 5700K. Luminaire shall be designed to emit at least 3000 lumens and an efficacy of atleast 120Lm/W and maximum system wattage of 36 Watt, designed for ambient temp 45 deg C. The metallic electronic driver shall have a power factor >0.95, THD <10%, 4KV internal surge protection and the Ripple factor should be <5% to minimise the Flicker and Stroboscopic effect and Fixture should have an operating voltage range of 140-270VAC complete all as specified and directed by engineer in charge.

S&F in replacement decorative wall mounted fancy light fitting made up of brass made (double light) bracket with 220mm x86mm rectangular base,two 210mm lengthy U shaped brass arms with 60mm dia galleries ,inside brass holders,tipped with 125mm lengthy MS Powder coated down pipes,mounted on MS powdercoated plates,frosted glass shades 155mm x129mm , finish dull black powder coated and lacquer coated including of bulb of 5 to 9 watts complete all as specified and directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittings complete all as specified and directed.. Note-: Three runs of 4 sqmm and one run of 4 sqmm incl 20mm conduit pipe will be measured as one length.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings complete all as specified and directed. Note-: Three runs of 4 sqmm and one run of 4 sqmm incl 20mm conduit pipe will be measured as one length.

Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth and matching wall color. complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.. Note:- Down rods of suitable length( 4feet,5 feet or 6 feet) is incl in the item rates and no extra payment will be done to the contractor for the same.

QUALITY CONSTRUCTIONS CO (BID ID -3068734)

M/s Bhadoria Associates (BID ID -3078608)

M/S S S A ASSOCIATES (BID ID -3078597)

Rakesh Traders (BID ID -3078682)

M/S KAUSHIK CONSTRUCTION (BID ID -3069096)

M/S VISHAL ENGINEERS (BID ID -3079485)