Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 1 20 W H S KIRTI NAGAR NEW DELHI 110015 INDIA TELEPHONE 011 4714 0200 DURIAN IN | Admitted-Finance |
| 2 | Admitted-Finance 2 4 1 BLOCK 2 KIRTI NAGAR NEW DELHI 110015 | WEST | DELHI | 110015 | Admitted-Finance |
Tender Value
Refer Docs
Closing Date
24 Jan 2024, 5:45 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, P.W. Division, Palghar
Executive Engineer, PW Division, Palghar, Bhandhakam Bhavan, Near Dhavale Hospital, Boisar Road, Palghar West.Pin- 401 404
Providing Furniture For 200 Bed Rural Hospital and Trauma Care Centre at Manor Dist. Palghar. Construction of Main Building
2024_PWR_988000_1
PWD/PAL/23-24/E-QUOTATION NIT.05
Open Tender
Furniture/ Fixture
Item Rate
100 days
PALGHAR
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
Exempted
29 Jan 2024
20 Jan 2024
29 Jan 2024
20 Jan 2024
24 Jan 2024
20 Jan 2024
Amount
Bravo Mid Back chair - 1.SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE 47.5 cm. (W) x58.0 cm (H) SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) 2.. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 3. ARMRESTS :The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. 4. CENTER TILT SYNCHRO mechanism: The mechanism should be designed with the following features: • 360° revolving type. • Upright-position locking • Tilt tension adjustment • Seat/back tilting ratio of 1:3. 5.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. 6.TELESCOPIC BELLOW ASSEMBLYThe bellow should be 3 piece telescopic type and injection moulded in black Polypropylene. 7.PEDESTAL ASSEMBLY:The pedestal should be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). 8.TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Nylon.
Work Table of size shall be 1200 Width x 600 Depth x 740 Height . The top shall be made from 25 mm thick pre- laminated board . All the edges are sealed with 2 mm thick PVC edge band all around . Side panels shall be made from 25 mm thick pre- laminated paticle board . All the edges are sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the top and bottom side .The side panels have 2 glide screws each for levelling of the desk. Modesty panel shall be made from 18 mm thick pre- laminated particle board . All the edges are sealed with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated particle board with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement . The drawers are provided with suitable slides for smooth operation . All the pedestal drawers are centrally locked with a single key .
Storwel Plain- Storwel plain shall have an overall size of 916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available.
1) SEAT SHELL : The seat shell should be a welded assembly of seat,back and side frame. The seat and back should be made of 0.12±0.013cm thk CR steel sheet with oblong perforations.They should be welded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly should be powder coated ( DFT 40-60 microns ). The seat has a front water fall edge to provide popliteal clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance. SEAT SIZE : 47.8 cm (W) x 44.6 cm (D) BACK SIZE : 41.6 cm (W) x 23.0 cm (H) 2) UNDERSTRUCTURE ASSEMBLY: Understructure assembly consshould be ts of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.The welded structure assembly should be powder coated ( DFT 40-60 microns ).The leg assembly should be fitted with shoes and levellers in Nylon. The leg structure should be designed with minimal should be a of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly help in aligning the structure for back to back arrangements. Levellers take cshould be of uneven flooring.Connecting beam should be fitted with snap locking end cap.lt also aids in side-by-side understructure alignment. 3) ARM REST ASSEMBLY: Armrest assembly consshould be ts of armrest frame and armrest pad . The armrest frame should be made up of size 3.175±0.05cm x 0.47±0.027cm thk HR steel and it should be powder coated ( DFT 40-60 microns ). Armrest pad should be injection molded in Nylon and should be fitted onto the armrest frame. Overall Dimensions of Chair Seat Height - 44.1 cm. Height - 78.5 cm. Width & Depth of Chair as - Width-114.5cm and Depth-63.8 cm.
The seat shell should be a welded assembly of seat,back and side frame. The seat and back should be made of 0.12±0.013cm thk CR steel sheet with oblong perforations.They should be welded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly should be powder coated ( DFT 40-60 microns ). The seat has a front water fall edge to provide popliteal clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance. * SEAT SIZE : 47.8 cm (W) x 44.6 cm (D) * BACK SIZE : 41.6 cm (W) x 23.0 cm (H) Understructure assembly consshould be ts of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.The welded structure assembly should be powder coated ( DFT 40-60 microns ).The leg assembly should be fitted with shoes and levellers in Nylon. The leg structure should be designed with minimal should be a of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly help in aligning the structure for back to back arrangements. Levellers take cshould be of uneven flooring.Connecting beam should be fitted with snap locking end cap.lt also aids in side-by-side understructure alignment .Armrest assembly consshould be ts of armrest frame and armrest pad . The armrest frame should be made up of size 3.175±0.05cm x 0.47±0.027cm thk HR steel and it should be powder coated ( DFT 40-60 microns ). Armrest pad should be injection molded in Nylon and should be fitted onto the armrest frame. Overall Dimensions of Chair Seat Height - 44.1 cm. Height - 78.5 cm. Width & Depth of Chair as - Width-169.5cm and Depth-63.8 cm.
2 Door Personal Locker Unit - 2 Door Personal Locker Unit - Product Size - 375(W) x 470(D) x 1950*(H) *Height including leveler * Height of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form a row of Lockers. (Note- Single Main unit should not be offered. Minimum 1Main + 1Addon to be offered, Maximum 1Main + 4Addon to be offered) Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 - CRCA 'D' Grade as per IS-513 Doors (Without envelope slot) - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing hinge. Door size - For 2 Door locker - 373(W) X 18(T) X 948(H) Shelving -It is a 10 bend panel made of 0.5mm Thick CRCA (D Grade, IS-513) Uniformly distributed load capacity of each shelf is 20kg . 3 Shelves for 2 Door locker without envelope slot Cam Lock - Oval knob that functions as a handle - Click action mechanism - Key removal in locked and unlocked position - Zinc alloy die cast housingZinc alloy die cast housing Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron).
4 Door Personal Locker Unit - 4 Door Personal Locker Unit - Product Size - 375(W) x 470(D) x 1950*(H) *Height including leveler * Height of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form a row of Lockers. (Note- Single Main unit should not be offered. Minimum 1Main + 1Addon to be offered, Maximum 1Main + 4Addon to be offered) Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 - CRCA 'D' Grade as per IS-513 Doors (Without envelope slot) - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing hinge. Door size -For 4 Door locker - 373(W) X 18(T) X 473(H) Shelves -It is a 10 bend panel made of 0.5mm Thick CRCA (D Grade, IS-513) Uniformly distributed load capacity of each shelf is 20kg . 3 Shelves for 4 Door locker without envelope slot Cam Lock - Oval knob that functions as a handle - Click action mechanism - Key removal in locked and unlocked position - Zinc alloy die cast housingZinc alloy die cast housing Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron).
L43 Sofa 3 seater- Back: (W)52.0 cm x (H)59.0cm x 6.0cm(T), Seat : (W)52.0cm x (D) 50.0cm x 6.0cm(T), Overall Dimensions of Chair Seat Height - 43.5 cm. ,Height - 78.5cm ,Width & Depth of Chair as - Width-164.0cm and Depth-70.0 cm. SEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T) BACKREST ASSEMBLY:The backrest assembly should be flexing type and consshould be ts of a fabricated inner-frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 14 ± 2 kgf for 25% compression of the foam. The complete moulded backrest assembly should be covered with a replaceable fabric upholstery cover. *BACK SIZE: 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T) 5)ADJ. GLIDES: The adjustable glide should be injection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adjustable.
L-Shape Cabin Main Table 1500mm X 750mm . Side Table -900mm X 450mm
Cabin High Back Chair - SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE 47.5 cm. (W) x 69.5 cm (H) SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS :The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTER TILT SYNCHRO mechanism: The mechanism should be designed with the following features: • 360° revolving type. • Upright-position locking • Tilt tension adjustment • Seat/back tilting ratio of 1:3. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLYThe bellow should be 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY:The pedestal should be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Nylon. Overall Dimensions of Chair Seat Height - min 42.5 to max 54.5cm. Height - min97.0 to max 109.0cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.
Cabin Visitor Chair SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE 47.5 cm. (W) x58.0 cm (H) SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS :The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. TUBULAR FRAME: The powder coated ( DFT 40-60 microns ) tubular frame should be cantilever type & made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube. Overall Dimensions of Chair Seat Height - 46.5cm. Height - 89.5cm. Width & Depth of Chair as measured from pedestal - Width-61.4 cm and Depth-64.5 cm.
Cafeteria Table - Time Out 4 Seater PU Coated size shall be 1135 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking .
Time Out 6 Seater PU Coated size shall be 1734 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking .
Cafeteria Chair - The Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. Overall Dimensions of Chair Seat Height - 45.0 cm. Height - 84.5cm. Width-52.5 cm and Depth-55.8 cm.
Storage Room - Optimizer Push Pull system on rail OPTIMIZER PLUS-PUSHPULL (1200mmW X 400mmD X1980mmH) Optz Plus Single static1 -1no Optz Plus Single Last - 1no Optz Plus Twin Mobile Solid back panel- 3 Nos
Rectangular Workstation - 4ft X 2 ft Providing and placing WISH spine and fin based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate or fabric at intermediate level. Top block finished in fabric magnetic finish. Bottom block is finished in metaL finish. SPLIT Tiles on main spine: Combination of two finishes for the top tiles on the user side shall be split fabric magnetic along with split white board. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in fabric + DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in fabric tackble finsh. Legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1350 mm w x 600 mm d. Pedestals with or without legs - Wish top supporting pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT withmousetray - metal Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring.
Pentagonal Workstation - 5 ft X 5ft PENTA WORKSTATIONS - 1500 X 1500 X 600 Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate at intermediate level. Top block finished in fabric finish. Bottom Tile is finished in metal finish. Tiles on main spine: Combination of top tiles are fabric magneitc & white board. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in DL + DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in frosted glass finsh. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. Pedestals with or without legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT with mousetray -metal Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring.
Single Bed for Staff ( Rest Room)- Overall Size: Width - 2050.0 mm Depth - 973.0 mm Height - 720.0 mm.Material :Headboard panels are made of 18 mm thick Prelaminated Particle Board.All the exposed edges are edge banded with 2 mm thick PVC edge banding.Bed leg frame structure consist of metal frames made of M.S. 50 x 25 mm box section in 1.2 thickness Internal Pipes made of 19 x 19 mm box section in 0.9 mm thickness. Headboard pipes are made of 25 x 25 mm box section in 0.9 mm thickness. Mattress holding bkt is made of 0.6 mm CRCA SHEET.Hardware :The high quality hardware used .Construction: Knock Down construction.Packets: 1 packet. Finish:18 mm thick Prelaminated Particle Board . Bed leg frame structure are powder coated in thickness of 50 microns (+-10). Rest all metals are powder coated in thickness of 50 microns (+-10). Certifications - Green Pro certified
Single Mattress for staff bed - Mattress for single bed Size - 78 inch. x 36 inch x 4 inch Thickness Thickness 50 mm.Quilting Material-PU Foam.Density of Quilting Material (± 2 Kg/m3)-18 Kg/m3.Mattress Top-Box Type. Cover-Fabric Composition-Polyester.MATTRESS COVER-Printed
Pillow for staff bed- Pillow with fabric upholstered having Size = 60cm x 40cm
EXAMINATION TABLE ON RATCHET WITH NO STORAGE: Overall dimension-1830mm X W 600mm X H 850 mm. The backrest has ratchet mechanism for tilting the backrest. Leg frames & intermediate frames is made of ERW tubes having section of 30 x 30 square tubes with thickness of 1.6mm. Nylon 6 leg shoes is given to avoid wear & tear. MS sheet metal lying surface of thickness 1.2mm is used. Top sheet metal panel base frame of 25 x 25 ERW square tubes of thickness 1.6mm is used. Ratchet is of MS Strip with section 40 x 4 to Provision the backrest tilt. All MS part are pre treated and powder coated with RAL white color & all plastic parts in Grey. Safe working load is 135kg.
EXAMINATION TABLE ON RATCHET MATTRESS 30 MM : Overall dimension should be 1833 mm (L) x 600 mm (W) x 30 mm (H). The examination table is provided with 40 density 30mm thick PU foam mattress which is covered by heavy helium material which is water proof, flame retardant, vapour & X-ray permeable. The zip & stitches for the mattress cover is concealed. The mattress foam and cover to be divided in 2 sections.
STRETCHER ON TROLLEY: Overall dimension should be 2005 mm (L) x 666 mm (W) x 827 mm (H). It should be removable stretcher on trolley mointed on castors.. The trolley should be made of 31.75 mm & 25.5 mm dia 1.2 mm thick & 1.6 mm thick ERW tube. The casters should be 200 mm dia diagonal lockable castors. stretcher understructure should be made of 25.4 mm dia 1.6 mm thick ERW tube and the top should be made of 1.2 mm thick CRCA sheet. The stretcher should have provision to mount IV pole at four corners. The product should be pre treated and powder coated with Epoxy polyster powder coating.The maximum load bearing capacity should be 135 kg
Rectangular Workstation - 4ft X 2 ft Providing and placing WISH spine and fin based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate or fabric at intermediate level. Top block finished in fabric magnetic finish. Bottom block is finished in metaL finish. SPLIT Tiles on main spine: Combination of two finishes for the top tiles on the user side shall be split fabric magnetic along with split white board. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in fabric + DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in fabric tackble finsh. Legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1350 mm w x 600 mm d. Pedestals with or without legs - Wish top supporting pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT withmousetray - metal Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring.
Pentagonal Workstation - 5 ft X 5ft PENTA WORKSTATIONS - 1500 X 1500 X 600 Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate at intermediate level. Top block finished in fabric finish. Bottom Tile is finished in metal finish. Tiles on main spine: Combination of top tiles are fabric magneitc & white board. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in DL + DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in frosted glass finsh. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. Pedestals with or without legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT with mousetray -metal Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring.
Multipurpose chair - The Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. Overall Dimensions of Chair Seat Height - 45.0 cm. Height - 84.5cm. Width-52.5 cm and Depth-55.8 cm.
Rectangular Workstation - 4ft X 2 ft Providing and placing WISH spine and fin based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate or fabric at intermediate level. Top block finished in fabric magnetic finish. Bottom block is finished in metaL finish. SPLIT Tiles on main spine: Combination of two finishes for the top tiles on the user side shall be split fabric magnetic along with split white board. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in fabric + DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in fabric tackble finsh. Legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1350 mm w x 600 mm d. Pedestals with or without legs - Wish top supporting pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT withmousetray - metal Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring.
Pentagonal Workstation - 5 ft X 5ft PENTA WORKSTATIONS - 1500 X 1500 X 600 Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate at intermediate level. Top block finished in fabric finish. Bottom Tile is finished in metal finish. Tiles on main spine: Combination of top tiles are fabric magneitc & white board. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in DL + DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in frosted glass finsh. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. Pedestals with or without legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT with mousetray -metal Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring.
AcuPrm Plus XP 5FMotorBloMo TWCL: Fully automatic embedded control Intensive care unit bed. The bed is provided with 4 nos PP moulded side boards with full coverage to bed. These side boards should be integrated with drop down mechanism for easy operation. The embedded control panels are placed: 4 no’s at the Head end sideboards (2 for attendant & 2 for patient). Nurse embedded panel should have features like Height, Backrest, Leg rest, TR/ATR, Auto contour, under bed light (UBL), CPR, Lock function, power and battery indicator, Single touch cardiac chair and Emergency head low position/Shock position. Patient embedded panel should have features like Height, Backrest, Leg rest, Auto contour, Single touch cardiac chair and UBL. PP moulded easily removable headboard and leg-board. Head board and foot board should be with metal inserts to mount it on bed frame. Removable PP head board and foot board should have cut out , for better gripping. Bed with 3 nos removable PP lying surface (pelvic, upper leg and lower leg rest). Backrest is X-Ray permeable with cassette holder made of compact laminate. Bed frame should be made of MS ERW tube of size 50mmx25mm of 2 mm thick supported with ERW square tube with 25 mm x 25 mm and 1.2 mm thick. Base frame made of MS ERW tube of size 30mmx60mm of 2mm thick. Base frame have ground clearance of greater than 150 mm to avoid any obstruction during bed movement. Base frame have Provision to mount oxygen cylinder cage as optional accessory. It should have angle & trendelenburg indicator guide. Bed with 4 nos TPE (thermoplastic eleastomer) bumpers to absorb shock . Bed with manual and automatic CPR lever, bed is with manual DVT position on ratchet. The bed has powder coated urine bag holder on both side of the bed for ease of accessibility.. All metal components are pre-treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating. Technical Details: ∙ Overall Length: 2241mm ∙ Overall Width :1050mm ∙ Height Range: 430 mm to 755 mm without mattress. ∙ Trendelenburg: 0°-13.5° (+/-1°) ∙ Reverse Trendelenburg: 0°-13.5° (+/-1°) ∙ Backrest Angle (Max.) : 0°-65° (+/-5°) ∙ Leg rest Angle (Max.): 0°-30°(+/-5°) ∙ Castor Diameter: 125mm ∙ Under Bed Clearance: 150mm ∙ Safe Working Load (With Accessories) : 215kg The bed Provided with 125mm plastic injection moulded twin wheel castors. with central and directional locking facility. The castors are Provided with an auxiliary brake made of MS round tube. It has accessories like urine bag holders; Electrical details: . Classification: Class 1 ∙ Electrical Shock Protection: Type B ∙ Liquid Ingress Protection: Actuators - IPX4 ∙ Control box - IPX6 Washable: ∙ Battery (optional) – IPX6 ( optional) ∙ Batteries: lead acid battery, rechargeable, 1.2-amp hrs / 28.8Wh. . Bed should have the liquid ingress protection as per IPX4.
Acura Mattress 100mm : The mattress should be size- (L)1950mm*(W)853mm*(H)100 mm. The mattress is provided with 40 density 100 mm thick PU foam mattress with ridges for easy bending. It is covered by heavy helium material which is water proof, flame retardant, vapour & X-Ray permeable with Bacteriostatic properties. The zip & stitches for the mattress cover is concealed.
APTIS OVER BED TABLE HEIGHT ADJUSTABLE ON GAS LIFT WITH MEMBRANE TOP: Over bed table with height adjustale feature.overall dimension should be (L)896 mm X ( W)395 mm X (H) Adjustable from 800 mm to 1083 mm .Table top Height can be adjusted with the help of operating lever which activates the gas spring. Base frame is made of ERW round tube with 50.8 mm dia and 1.6 mm thickness.Housing is made of aluminium extruded inner and outer tubes.Handle for gas spring made of MS sheet metal of section 74 mm x 115 mm with 3 mm thick Handle with CRCA material making strong lever and have provision of wider area for grip.Gas spring of length 835 mm and stroke of 293 mm. Smooth functioning gas spring with adjustable height and consistent motion during operation. Effort level to push downward = 14.5(-2kg)at room temp 29°C. Plain top made of membrane pressed MDF with section 395 mm x 896 mm of 18 mm thickness. Membrane pressed MDF board of frosty white shade on top surface and with edge lipping.Top: MDF top with membrane press , should give anti scratch Property with good surface finish. Castors: High endurance anti-static,Plastic injection molded castors are Provided of Ø50mm. All metal parts should be pre treated and powder coated with epoxy polyster..Max Safe Working Load: 20 kg UDL. goods are supplied in knocked down construction to reduce carbon emission.
INFUSION POLE ASSLY ADJUSTABLE WITH 2 HOOKS: Fixed tube assembly of SS 304 tube with dia. 31.75mm and 1.6mm thickness. Heavy duty height adjustable IV pole with SS 304 make mounting on bed. It has glossy mirror finish. The maximum sale working load is 3Kg per hook for saline bag. 9KG including syringe pump 7 infusion pump, device mounted on fixed tube. Hook Arm Arm PCD Dia. 366mm and the overall height is from 855 mm to 1358mm. The knob is made up of Nylon with threaded stem.
APTIS LOCKER WITH ONE DRAWER & CABINET: The bedside locker has single drawer and cabinet with lock and with plastic molded handle. There is space between plastic top and the cabinet to keep the general items for the frequent use. Cabinet is Provisionided with lock to keep the valuable items for the safety. overall dimensions should be 490mmW x 410mm D x 941mm H Corner tube made of ERW round tube with section 25.4 mm dia of 1.2 mm thickness Cabinet made of CRCA sheet of 0.8 mm thick Provided with lock.( 470 mm x 410 mm x 382 mm) Top made of ABS of 2.2 mm thick. Top has recessed and contoured shape for better aesthetic and usability. Plastic molded knob is Provisionided with Matt finish and dome shaped for better grip. Plastic molded castors with 50 mm dia placed in diagonal locking arrangement. RAL white, plastic parts in Grey. 5 kg UDL on both the tops and 10 kg in the cabinet. All metal components are pre treated with zinc phosphating in 7 tank process and then powder coated with anti microbial epoxy polyester powder coating to fulfill the requirements for bacterial protection against at least 2 commonly found bacteria in Hospital environment [Gram positive and Gram Negative]. goods are supplied in knocked down construction to reduce carbon emission.
Staff Chair - Bravo Mid Back chair - 1.SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area BACK SIZE 47.5 cm. (W) x58.0 cm (H) SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) 2.. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 3. ARMRESTS :The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. 4. CENTER TILT SYNCHRO mechanism: The mechanism should be designed with the following features: • 360° revolving type. • Upright-position locking • Tilt tension adjustment • Seat/back tilting ratio of 1:3. 5.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. 6.TELESCOPIC BELLOW ASSEMBLYThe bellow should be 3 piece telescopic type and injection moulded in black Polypropylene. 7.PEDESTAL ASSEMBLY:The pedestal should be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). 8.TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Nylon.
Rectangular Workstation - 4ft X 2 ft Providing and placing WISH spine and fin based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate or fabric at intermediate level. Top block finished in fabric magnetic finish. Bottom block is finished in metaL finish. SPLIT Tiles on main spine: Combination of two finishes for the top tiles on the user side shall be split fabric magnetic along with split white board. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in fabric + DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in fabric tackble finsh. Legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1350 mm w x 600 mm d. Pedestals with or without legs - Wish top supporting pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT withmousetray - metal Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring.
Pentagonal Workstation - 5 ft X 5ft PENTA WORKSTATIONS - 1500 X 1500 X 600 Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate at intermediate level. Top block finished in fabric finish. Bottom Tile is finished in metal finish. Tiles on main spine: Combination of top tiles are fabric magneitc & white board. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in DL + DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in frosted glass finsh. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. Pedestals with or without legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT with mousetray -metal Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring.
Fully motorised ICU bed with remote control panels Five Electric operated features are Backrest, Leg rest , High-Low, Trendelenburg, Reverse Trendelenburg(Only one handset will be Provided). The bed is provided with 4 nos PP side boards with full coverage to bed. These side boards should be integrated with drop down mechanism for easy operation. PP moulded easily removable headboard and leg-board. Head board and foot board should be with metal inserts to mount it on bed frame. Removable PP head board and foot board should have cut out , for better gripping. Bed with 3 nos removable PP lying surface (pelvic, upper leg and lower leg rest). Backrest is X-Ray permeable with cassette holder made of compact laminate. Bed frame should be made of MS ERW tube of size 50mmx25mm of 2 mm thick supported with ERW square tube with 25 mm x 25 mm and 1.2 mm thick. Base frame made of MS ERW tube of size 30mmx60mm of 2mm thick. Base frame have ground clearance of greater than 150 mm to avoid any obstruction during bed movement. Base frame have Provision to mount oxygen cylinder cage as optional accessory. It should have angle & trendelenburg indicator guide. Bed with 4 nos TPE (thermoplastic eleastomer) bumpers to absorb shock . Bed with manual and automatic CPR lever, bed is with manual DVT position on ratchet. The bed has powder coated urine bag holder on both side of the bed for ease of accessibility. All metal components are pre-treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating. Technical Details: ∙ Overall Length: 2241mm ∙ Overall Width: 1050mm ∙ Height Range: 440 mm to 770 mm without mattress. ∙ Trendelenburg: 0°-13.5° (+/-1°) ∙ Reverse Trendelenburg: 0°-13.5° (+/-1°) ∙ Backrest Angle (Max.) : 0°-65° (+/-5°) ∙ Leg rest Angle (Max.): 0°-30°(+/-5°) ∙ Castor Diameter: 125mm ∙ Under Bed Clearance: 150mm ∙ Safe Working Load (With Accessories) : 200kg The bed Provided with 125mm plastic injection moulded twin wheel castors with diagonal locking facility. It has accessories like urine bag holders; Electrical details: . Classification: Class 1 ∙ Electrical Shock Protection: Type B ∙ Liquid Ingress Protection: Actuators - IPX4 ∙ Control box - IPX6 Washable: ∙ Battery (optional) – IPX6 ( optional) ∙ Batteries: lead acid battery, rechargeable, 1.2-amp hrs / 28.8Wh.Bed should have the liquid ingress protection as per IPX4.
OXYGEN CYLINDER TROLLEY: MS Oxygen cylinder trolley suitable for B type oxygen cylinder. The overall dimension should be 410 mm (L) x 375 mm (W) x 1112 mm (H). The main frame should made of 25.4 mm dia 1.6 mm thick ERW tube with 10 mm dia ms made locking rod to keep the cylinder position during transit.The trolley should be provided with 100 mm dia 25 mm thick PU wheel for longer durability. LDPE made leg bush should be provided on the legs. Max load bearing capacity should be 50 kg.
APTIS LOCKER WITH CABINET ONLY : The bedside locker have cabinet with lock and with plastic molded handle. There is space between plastic top and the cabinet to keep the general items for the frequent use. Cabinet is Provisionided with lock to keep the valuable items for the safety. overall dimensions should be 404mm W x 402mm D x 835mm H Corner tube made of ERW round tube with section 25.4 mm dia of 1.2 mm thickness Cabinet made of CRCA sheet of 0.8 mm thick Provided with lock.( 470 mm x 410 mm x 382 mm) Top made of ABS of 2.2 mm thick. Top has recessed and contoured shape for better aesthetic and usability. Plastic molded knob is Provisionided with Matt finish and dome shaped for better grip. Plastic molded castors with 50 mm dia placed in diagonal locking arrangement. RAL white, plastic parts in Grey. 5 kg UDL on both the tops and 10 kg in the cabinet. All metal components are pre treated with zinc phosphating in 7 tank process and then powder coated with anti microbial epoxy polyester powder coating to fulfill the requirements for bacterial protection against at least 2 commonly found bacteria in Hospital environment [Gram positive and Gram Negative]. goods are supplied in knocked down construction to reduce carbon emission.
CHRYSALIS MATTRESS: The bed is Provided with 40 density 100 mm thick PU foam mattress which is covered by heavy helium material which is water proof, flame retardant, vapour & X-ray permeable. The zip & stitches for the mattress cover is concealed. The mattress should be size- 1900 mm ( L) x 840 mm ( W) x 100 mm ( H).
CHRYSALIS MATTRESS EXTENSION: The bed is Provided with 40 density 100 mm thick PU foam mattress which is covered by heavy helium material which is water proof, flame retardant, vapour & X-ray permeable. The zip & stitches for the mattress cover is concealed. The mattress should be size- 1900 mm ( L) x 840 mm ( W) x 100 mm ( H).
APTIS LOCKER WITH TWO DRAWER & CABINET: The bedside locker has two drawer and cabinet with lock and with plastic molded handle. . Cabinet is Provided with lock to keep the valuable items for the safety. overall dimensions should be 490mmW x 410mm D x 941mm H Corner tube made of ERW round tube with section 25.4 mm dia of 1.2 mm thickness Cabinet made of CRCA sheet of 0.8 mm thick Provisionided with lock.( 470 mm x 410 mm x 382 mm) Top made of ABS of 2.2 mm thick. Top has recessed and contoured shape for better aesthetic and usability. Plastic molded knob is Provisionided with Matt finish and dome shaped for better grip. Plastic molded castors with 50 mm dia placed in diagonal locking arrangement. RAL white, plastic parts in Grey. 5 kg UDL on both the tops and 10 kg in the cabinet. All metal components are pre treated with zinc phosphating in 7 tank process and then powder coated with anti microbial epoxy polyester powder coating to fulfill the requirements for bacterial protection against at least 2 commonly found bacteria in Hospital environment [Gram positive and Gram Negative]. goods are supplied in knocked down construction to reduce carbon emission.
Rectangular Workstation - 4ft X 2 ft Providing and placing WISH spine and fin based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate or fabric at intermediate level. Top block finished in fabric magnetic finish. Bottom block is finished in metaL finish. SPLIT Tiles on main spine: Combination of two finishes for the top tiles on the user side shall be split fabric magnetic along with split white board. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in fabric + DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in fabric tackble finsh. Legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1350 mm w x 600 mm d. Pedestals with or without legs - Wish top supporting pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT withmousetray - metal Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring.
Pentagonal Workstation - 5 ft X 5ft PENTA WORKSTATIONS - 1500 X 1500 X 600 Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate at intermediate level. Top block finished in fabric finish. Bottom Tile is finished in metal finish. Tiles on main spine: Combination of top tiles are fabric magneitc & white board. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in DL + DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in frosted glass finsh. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. Pedestals with or without legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT with mousetray -metal Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring.
Acura Prime Motorized 5Function XP with PP sideboards and head/foot boards: Fully motorised ICU bed with remote control panels Five Electric operated features are Backrest, Leg rest , High-Low, Trendelenburg, Reverse Trendelenburg(Only one handset will be Provided). The bed is provided with 4 nos PP side boards with full coverage to bed. These side boards should be integrated with drop down mechanism for easy operation. PP moulded easily removable headboard and leg-board. Head board and foot board should be with metal inserts to mount it on bed frame. Removable PP head board and foot board should have cut out , for better gripping. Bed with 3 nos removable PP lying surface (pelvic, upper leg and lower leg rest). Backrest is X-Ray permeable with cassette holder made of compact laminate. Bed frame should be made of MS ERW tube of size 50mmx25mm of 2 mm thick supported with ERW square tube with 25 mm x 25 mm and 1.2 mm thick. Base frame made of MS ERW tube of size 30mmx60mm of 2mm thick. Base frame have ground clearance of greater than 150 mm to avoid any obstruction during bed movement. Base frame have Provision to mount oxygen cylinder cage as optional accessory. It should have angle & trendelenburg indicator guide. Bed with 4 nos TPE (thermoplastic eleastomer) bumpers to absorb shock . Bed with manual and automatic CPR lever, bed is with manual DVT position on ratchet. The bed has powder coated urine bag holder on both side of the bed for ease of accessibility. All metal components are pre-treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating. Technical Details: ∙ Overall Length: 2241mm ∙ Overall Width: 1050mm ∙ Height Range: 440 mm to 770 mm without mattress. ∙ Trendelenburg: 0°-13.5° (+/-1°) ∙ Reverse Trendelenburg: 0°-13.5° (+/-1°) ∙ Backrest Angle (Max.) : 0°-65° (+/-5°) ∙ Leg rest Angle (Max.): 0°-30°(+/-5°) ∙ Castor Diameter: 125mm ∙ Under Bed Clearance: 150mm ∙ Safe Working Load (With Accessories) : 200kg The bed Provided with 125mm plastic injection moulded twin wheel castors with diagonal locking facility. It has accessories like urine bag holders; Electrical details: . Classification: Class 1 ∙ Electrical Shock Protection: Type B ∙ Liquid Ingress Protection: Actuators - IPX4 ∙ Control box - IPX6 Washable: ∙ Battery (optional) – IPX6 ( optional) ∙ Batteries: lead acid battery, rechargeable, 1.2-amp hrs / 28.8Wh.Bed should have the liquid ingress protection as per IPX4.
Oxygen Cylinder case is fitted at base frame on head side of ICU bed and Provides the safe housing to oxygen cylinder.(L)840 mm X ( W)213 mm X (H) 165 mm.
Rectangular Workstation - 4ft X 2 ft Providing and placing WISH spine and fin based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate or fabric at intermediate level. Top block finished in fabric magnetic finish. Bottom block is finished in metaL finish. SPLIT Tiles on main spine: Combination of two finishes for the top tiles on the user side shall be split fabric magnetic along with split white board. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in fabric + DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in fabric tackble finsh. Legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1350 mm w x 600 mm d. Pedestals with or without legs - Wish top supporting pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT withmousetray - metal Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring.
Pentagonal Workstation - 5 ft X 5ft PENTA WORKSTATIONS - 1500 X 1500 X 600 Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate at intermediate level. Top block finished in fabric finish. Bottom Tile is finished in metal finish. Tiles on main spine: Combination of top tiles are fabric magneitc & white board. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in DL + DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in frosted glass finsh. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. Pedestals with or without legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT with mousetray -metal Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring.
SEAT ASSEMBLY: The seat assembly is made of polyurethane foam moulded with M.S. tubular frame insert which is upholstered with foam laminated fabric. The insert is tubular frame made of Ø1.9 ±0.02cm x 0.16 ±0.013cm thk MS. E.R.W round tube with flexible support straps running across the length and width of the frame.The Seat has an auto-tipup feature making it stay in upright position when not in use enabling clear row passage. * Approx. Seat Size : 45.5cm (W) x 46.5cm (D). 2. BACKREST ASSEMBLY: The back assembly has a flexi back mechanism. It is made of polyurethane foam moulded with M.S. tubular frame insert, upholstered with foam laminated fabric and has a plastic back cover. The insert is a tubular frame made of Ø1.9 ±0.02cm x 0.16 ±0.013cm thk M.S.E.R.W round tube with flexible support straps running across the length and width of the frame. * Approx. Back Size : Mid Back- 45.5cm (W) x 70.4cm (H). 3. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45 +/-3 kg/m³. 4. SIDE PANEL / AISLE PANEL:The chair rests on the ground on two side panels fabricated using 8.0±0.03cm x 4.0±0.03cm x 0.12±0.0096cm and 5.0±0.03cm x 2.5±0.03cm x 0.12±0.0096cm M.S. ERW Tubes which are CO2- Argon Welded. The side panel frame is grouted to the floor using 2 nos. of anchors for each panel through M.S. bush which are welded to 5.0±0.03cm x 2.5±0.03cm x 0.12±0.0096cm Tube. The Anchor Bolts are covered with Polypropylene Foundation Bolt Cover. 5. PP ARMREST WITH CUP HOLDER : The Armrest is made up of compounded Polypropylene. The Armrest is fitted with the side panel. 6. POWDER COATING: Steel components are epoxy polyester powder coated (DFT 40-60 microns). 7. FLOORING PRE - REQUISITE : The auditorium chair is designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre-requisite.
Acura Prime Motorized 5Function XP with PP sideboards and head/foot boards: Fully motorised ICU bed with remote control panels Five Electric operated features are Backrest, Leg rest , High-Low, Trendelenburg, Reverse Trendelenburg(Only one handset will be Provided). The bed is provided with 4 nos PP side boards with full coverage to bed. These side boards should be integrated with drop down mechanism for easy operation. PP moulded easily removable headboard and leg-board. Head board and foot board should be with metal inserts to mount it on bed frame. Removable PP head board and foot board should have cut out , for better gripping. Bed with 3 nos removable PP lying surface (pelvic, upper leg and lower leg rest). Backrest is X-Ray permeable with cassette holder made of compact laminate. Bed frame should be made of MS ERW tube of size 50mmx25mm of 2 mm thick supported with ERW square tube with 25 mm x 25 mm and 1.2 mm thick. Base frame made of MS ERW tube of size 30mmx60mm of 2mm thick. Base frame have ground clearance of greater than 150 mm to avoid any obstruction during bed movement. Base frame have Provision to mount oxygen cylinder cage as optional accessory. It should have angle & trendelenburg indicator guide. Bed with 4 nos TPE (thermoplastic eleastomer) bumpers to absorb shock . Bed with manual and automatic CPR lever, bed is with manual DVT position on ratchet. The bed has powder coated urine bag holder on both side of the bed for ease of accessibility. All metal components are pre-treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating. Technical Details: ∙ Overall Length: 2241mm ∙ Overall Width: 1050mm ∙ Height Range: 440 mm to 770 mm without mattress. ∙ Trendelenburg: 0°-13.5° (+/-1°) ∙ Reverse Trendelenburg: 0°-13.5° (+/-1°) ∙ Backrest Angle (Max.) : 0°-65° (+/-5°) ∙ Leg rest Angle (Max.): 0°-30°(+/-5°) ∙ Castor Diameter: 125mm ∙ Under Bed Clearance: 150mm ∙ Safe Working Load (With Accessories) : 200kg The bed Provided with 125mm plastic injection moulded twin wheel castors with diagonal locking facility. It has accessories like urine bag holders; Electrical details: . Classification: Class 1 ∙ Electrical Shock Protection: Type B ∙ Liquid Ingress Protection: Actuators - IPX4 ∙ Control box - IPX6 Washable: ∙ Battery (optional) – IPX6 ( optional) ∙ Batteries: lead acid battery, rechargeable, 1.2-amp hrs / 28.8Wh.Bed should have the liquid ingress protection as per IPX4.
Document Holder: Overall Sizes (L)464 mm X ( W)137 mm X (H) 344 mm. Wire mesh made of MS rod of dia 6mm & front cover MS sheet of thickness 0.6mm. product should be pre treated and powder coated with epoxy polyster powder coating
Over bed table with height adjustale feature.overall dimension should be (L)896 mm X ( W)395 mm X (H) Adjustable from 800 mm to 1083 mm .Table top Height can be adjusted with the help of operating lever which activates the gas spring. Base frame is made of ERW round tube with 50.8 mm dia and 1.6 mm thickness.Housing is made of aluminium extruded inner and outer tubes.Handle for gas spring made of MS sheet metal of section 74 mm x 115 mm with 3 mm thick Handle with CRCA material making strong lever and have provision of wider area for grip.Gas spring of length 835 mm and stroke of 293 mm. Smooth functioning gas spring with adjustable height and consistent motion during operation. Effort level to push downward = 14.5(-2kg)at room temp 29°C. Plain top made of membrane pressed MDF with section 395 mm x 896 mm of 18 mm thickness. Membrane pressed MDF board of frosty white shade on top surface and with edge lipping.Top: MDF top with membrane press , should give anti scratch Property with good surface finish. Castors: High endurance anti-static,Plastic injection molded castors are Provided of Ø50mm. All metal parts should be pre treated and powder coated with epoxy polyster..Max Safe Working Load: 20 kg UDL. goods are supplied in knocked down construction to reduce carbon emission.
Durian Industries Limited
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .