ANNUNAL MAINTENANCE TO WALL TOILET KITCHEN PLASTERING ROOF TREATMENT FLOORING BATHROOM SAINATRY FITTING AND OTHER MISC REPAIR IN MD ACCN IN ZONE- I II AREA UNDER AGE B/R-1 OF GE (NORTH) MEERUT CANTT

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins arches pillars etc.complete all as specified and directed.

M&L for old size brick work with sub class B bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and directed.

M&L for old sizebrickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks Complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified and directed

M & L for 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M&L for Rendering 5 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified and directed

M & L for 15 mm thick rendering in CM 1:4 on other than fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M& L for preparing plastered un plastered new surfaces on ceiling and applying three coats of white wash on ceiling surface complete all as specified and directed

M&L for preparation of newly plastered surfaces of wall by applying wall care putty averaging thickness 2mm and rubbing with sand paper for making smooth surface and applying two coat of oil emulsion distemper over one coat of primer through roller, complete all as specified and directed .

M&L for preparation of New surface of of wall by applying 1mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified and directed.

M&L for preparation of Complete removal of existing treatment plastered old surface of of wall by applying 1mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified and directed.

M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any position unframed work complete all as specified and directed

M & L for Rolled mild steel in Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats similar work conforming to Fe 410 -W (Gde E- 250) quality A etc complete all as specified and directed

M & L for in repairs Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

M&L for preparation of old surface after complete removal of existing treatment by mechanical means complete all as specified and directed.

M&L for applying 1mm thick wall care putty making smooth surface complete all as specified and directed.

M&L for 1 coat of primer complete all as specified and directed.

M&L for Two coat of OBD using roller for painting complete all as specified and directed

M&L for one coat of acrylic smooth coat applied @ 1.67 ltr/ 10 sqm over using roller for painting complete all as specified and directed.

M & L for Preparation of old plastered surface of ceiling and applying two coat of WHITE WASH over one coat of primer using roller for painting complete all as specified & directed.

M & L for Preparing old Plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and directed

M & L for Preparation of old painted wood and wood base surfaces of any description, not otherwise described over 10 cm width or girth and painting with a coat of sythetic enamel paint complete all as specified and directed

M&L for preparation of old steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified and directed

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each complete all as specified and directed

Taking down chowkhat or frames of door/ window / ventilators with shutter(Without taking off shutter from the frame) n.exc 1.50 m each complete all as specified and directed

Taking down shutters of any description exc 1.00 m and n.exc 2.00 Sqm complete all as specified and directed

M & L for Anodised aluminium Powder Coating (minimum thickness of powder coating 50 micron) frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

M & L for Anodised aluminium Powder Coating of Approved colour (Thickness or powder coating not less than 50 micron) sliding window and ventilator shutters, sliding (Two/Three) type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium and Sliding Arrangement Complete fittings as required complete all as specified and directed

M & L for Anodised aluminium Powder Coating of Approved colour (Thickness or powder coating not less than 50 micron) door Shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, hydraulic door closer anodised aluminium snap beading, screws, anodised aluminium Complete fittings as required complete all as specified and directed

S&F for 4mm thick, black tinted glass panes fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) not exc 0.5 sq.m from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed.

M&L for 3mm thick plain sheet glass, pin head type and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

S&F in repairs, Mortice lock, brass, four lever, verticle type, size 75mm complete all as specified and directed.

S&F in repairs for hasp & staples 125mm in size, safety type alu. anodised fixed with screws complete all as specified and directed

M&L in repairs, HOLLOW PVC Wall lining consisting of 5 mm thick plain colour pvc sheet inclusive of solvent cement and fixing at site on PVC Frame with 5mm pvc fillets as per specified and drawing shown as per page of SSR part II . complete all as specified and directed.

S&F in repairs plastic seat cover black/white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed

S&F, in repairs, vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. including 32mm dia waste pipe with CP waste coupling pvc connection ,bracket etc in repair complete all as specified and directed.

S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.

S & F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel but hinges and necessary S S screws shall be paid separately.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed

S & F for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sides face is covered with decorative face veneer with lipping/frame to match all as specified and directed

S&F Glazed and skelton shutters 30 mm thick second class hard wood, opened rebated and prepared to receive wire mesh etc, edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for sucuring witre mesh etc. Size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.24(a) complete all as specified and directed

S&F, in repairs Mortice lock, brass, four lever, verticle type, size 75mm complete all as specified and directed.

S&F, in repairs, aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed.

S&F, in repairs for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawings complete all as specified and directed

M& L for Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed

S&F, 100 mm butt hinges, meium weight cold rolled mild steel complete all as specified and directed

S&F, aluminium handle cast type anodised 125 mm long complete all as specified and directed

S&F, aluminium anodised barrel tower bolt 150 mm, extruded section complete all as specified and directed

S&F, Mild steel springs for doors, 150 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F, aluminium anodised barrel tower bolt 200 mm, extruded section complete all as specified and directed

S&F, aluminium anodised sliding door bolts with hasp and stapple extruded section or cast aluminium alloy 300 mm long complete all as specified and directed

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store andd rubbish off the premises complete all as specified and directed

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick square/ rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in loors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for light shade, vitrified tiles, 7 to 8 mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bedding in CM (1:6) complete all as specified and directed.

M&L for vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 350mm x 7mm/600mmx300mmx7 mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.

M&L for 18 -20mm thick BLACK/RED(LAKHA) granite factory made bull nosed, polished (table rubbed and polished) as in jambs, wall,window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

M&L for rounding to edges of stone slabs two edge full round, such as in steps,cooking platform and other similar situation complete all as specified and directed.

Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed

M&L for 18/19mm thick Soild WPC board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with screws to WPC frame work in cup boards, rebated or flat edged fancy handle , Magnite lock complete all as specified and directed.

S&F in repairs, continuous (piano) hinges, mild steel bright finish or electrogalvanised, width of flap 40 mm complete all as specified and directed.

Dismantling water tank of capacity exc 500 ltrs but not exc. 1000 Ltrs complete all as specified and directed

S&F in repairs Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 500 ltrs, including 20 mm bore Ball PTMT brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and dismantling of old water tank complete all as specified and directed.

S&F in repairs Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 1000 ltrs, including ball PTMT valve 20 mm bore, high pressure with polythene ball & float and dismantling of old water tank complete all as specified and directed.

S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed

S&F in repairs gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and directed

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and wall complete all as specified and directed

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified

M & L for cutting chases for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth, complete.

S&F in repairs 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with fancy type screwed both ends for iron or for union complete all as specified and directed

S&F in repairs 15 mm dia brass chromium plated mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead complete all as specified and directed

S&F in repairs cromium plated 15 mm bore size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repairs PVC connection 15 mm size with PTMT nuts 450 mm long complete all as specified and directed

S&F in repairs, chromium plated towel rack of size 24" complete all as specified and directed.

S&F in repairs vitreous china ware EWC combined pattern complete with internal fittings complete all as specified and directed

S&F in repairs stainless steel fancy type curtain rod, 20mm dia fixed with braket, incl taking down of old curtain rods complete all as specified and directed

S&F in repairs Toilet paper holder of brass chromium plated conforming to the samples kept complete all as specified and directed

S&F in repairs Towel ring 200 mm dia chromium plated fancy type conforming to the sample kept complete all as specified and directed

S&F in repairs sinks with drainage board made of stainless steel 1mm thick for kitchen with plugs, CP waste coupling, waste pipe and including in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm Complete all as specified and directed.

S&F in repairs 1mm thick, stainless steel plate rack of size 1200mm x 900mm x 180mm complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed

S&F in repairs, corner glass shelf with bracket complete all as specified and directed.

S&F in repairs brass chromium plated soap dish complete all as specified and directed.

Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches if required for 110mm and 75mm bore of pipe complete all as specified and directed.

S&F in repairs,110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F in repairs, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laying as in floor and complete all as specified and directed.

S&F in repair ,PVC(SWR) junction single, (Single T) equal or unequal provided with access door 110mm bore complete all as specified and directed

S&F in repairs, PVC(SWR) bends 110mm bore any radius complete all as specified and directed

S&F in repairs, PVC(SWR) floor trap, 110mm bore, plain with grating including jointing with solvent cement complete all as specified and directed

Dismantling wall and ceiling boads (fibre, pulp, insulation etc.) or insulation boards/ slab/ blankets, any thickness including aluminium snap grid complete all as specified and directed.

S&F Tee grid suspension system of size 600 mm x600 mm type-1 made out of rolled framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc all as per manufactures instructionscomplete all as specified and directed

S&F fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as per manufactures instructions and complete all as specified and directed

Taking down aluminium ventilators (with frame & shutters) for servicing by tightening loose fittings & aluminium sactions by tightening existing screws or providing new screws/aluminium cleats of appropriate size, cleaning, greasing/oiling (where required), easing & making functional and refixing in same openingcomplete all as specified and directed

S&F in repairs 15mm dia, brass chromium plated health faucet with 1.25 meter long flexible hose and wall hook complete all as specified and directed .

S&F, in repairs, vitreous china wash down water closet pan (Pedestal pattern), white with 'p' or 's' trap (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia 300mm long for wash hand basin area with brackets complete all as specified and directed.

S&F pillar Tap cast coppeer alloy with captan head chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shank and fly nut fancy type 15mm bore fixed in repair complete all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for cement concrete 1:4:8, type D2(40mm graded stone aggregate) as in 75mm thick sub base complete all as specified and directed

M&L for chequered cement concrete colour tiles glossy finish size 300mm x300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 15 mm thick screed bed in cm (1:6) complete all as specified and directed

S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed.

S&F in repairs 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof wall etc complete all as specified and directed.

M&L for exterior wall cladding tiles brick pattern of any colour approved by Engr-in-charge of size 300x600x10 mm thick mat finishes over 10mm thick heavy duty chemical resistant adhensive for fixing tile on wall complete all as specified and directed.

S&F at site and on position floor mounted vanity counter made of Superior Material Quality with HDHMR (High Density High Moisture Resistant) of size 770x451x680mm/800x470x680mm having vitreous china basin on top with SS cabinet & side cabinet and soft close door & drawers of approved pattern and design with necessary fixing arrangment complete all as specified and directed Note: wash basin to be paid separately.

M & L for Type B0 1:2:4 (12.5mm graded aggregate) Providing precast cement concrete louvres and jallies, 25mm thick (mea sured solid), Set in cement mortar 1:4 complete all as specified and as directed.

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

M&L for nominal mix concretes 1:2:4 type B-O(using 12.5 mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement all as specified and directed.

M&L for 10mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate) complete all as specified and directed

Supply only liquid water proofing compound complete all as specified and directed

M&L for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed. (including existing water tank on roof disconnected and after cleanig same position connecting)

M&L for surface Preparation: The surface to receive the treatment shall be thoroughly free of laitance, scales, oil or any other loose material. It should be made free of any sharp objects. Cleaning of PCC shall be done with wire brushing to attain smooth levelled surface. Cracks shall be rectified, filled using dual shrinkage compensated Repair Mortar and dried for 72 hours before laying the liquid applied membrane. Grout: Providing Chemical injection treatment in the form of pressure grouting to the construction joint and cracked portion at 1m c/c by injecting cement slurry mixed with dual shrinkage compensated cementitious grout Injection grout additive, in the required consistency through the pre fixed PVC nozzles in the 18 mm dia holes, fixing of PVC nozzles with instant setting cement. Angle fillets/Coving: Providing and making of fillet, 50mm x 50mm on sharp corner of terrace with cement sand polymer mortar (add “multipurpose mortar”, 10% by weightofcement). First apply the bonding coat of Multi-Purpose Polymer 5-10% diluted in water and add to cement slurry. Apply the bonding slurry and apply the polymer mortar over the sharp edges. Note: Grouting will be done when and where ever required. Treatment of pipe entry points: Preparing the inside surface of core and PVC /MS Pipe by roughening using suitable Sand paper to get better adhesion prior to packing works. Cleaning the surface by wire brushing followed water jet to remove any laitance or loose flaky particles. Packing the gap using free flowable non shrink cement polymer based grout up to the surface of the bore while the bonding agent is in tacky state. the periphery of PVC pipe should be sealed with Hybrid PU Sealant or dual shrinkage compensated Micro concrete Note: Will be done when and where ever required Application of Asian Paints two component Epoxy Primer (Resin & Hardener) on the cleaned surface for bonding of Polyurethane with the existing concrete surface. 33 % water dilution is recommended with the pure mixed primer. The primer mixing ratio will be 1:3(Resin:Hardner) Supplying, providing and applying waterproofing treatment to Podium area with single component highly elastomeric seamless cold applied modified PU coating complete as per manufacturer’s specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have a dual combination of 280% elongation. Material coverage 1.2kg /sq.mt. (Note: Contractor is required to deposit 100% CA quantity to the Engr-in-Charge, within 15 days of acceptance of contract.

M&L for sunken slab treatment comprising of the following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250mm compete all as specified and directed.(b) Material & labour for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Material & labour for applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Material & labour for applying bitumin grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) Material & labour for 25mm thick plastering in CM 1:4 using water proofing compound (WPC) @ 3% by weight of cement. on wall of sunken floor (f) Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) Supply & fix of 32mm dia GI pipe medium grade, 450m long 9 (for draining out the water) complete all as specified and directed.

S & F in repairs stainless steel basket size (15 inch X 20 inch X 4 inch) for modular kitchen cutlery tray/basket with complete sliding Arrangement fixed kitchen cabinet frame complete all as specified and directed.

S & F in repairs stainless steel basket size (15 inch X 20 inch X 6 inch) for modular kitchen tray/basket with complete sliding Arrangement fixed Kitchen cabinet frame complete all as specified and directed.

S & F in repairs stainless steel basket size (15 inch X 20 inch X 8 inch) for modular kitchen crockery tray / basket with complete sliding Arrangement fixed kitchen cabinet frame complete all as specified and directed.

S & F in repairs stainless steel basket size (15 inch X 20 inch X 10 inch) for modular kitchen grain troIIy basket with complete sliding arrangement fixed kitchen cabinet frame complete all as specified and directed.

S & F in repairs stainless steel basket size (15 inch X 20 inch X 4 inch) for modular kitchen tray / basket with complete sliding arrangement fixed kitchen cabinet fram complete all as specified and directed.

S & F in repairs Stainless steel wide 110 degree Hydraullic hing fixed with ss screw complete all as specified and directed

M&L for stone slab 30mm thick stone dressed true and square, in one length not less than 60cm and n. exc 120cm in chajjas, sunshades,Plinth Protection etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed.

AMBEY CONSTRUCTION (BID ID -3512974)

NP ENTERPRISES (BID ID -3507112)

Shri Kanchan Engineers (BID ID -3512264)

MAHTAB ALAM (BID ID -3505244)