8523E8REPAIR TO FENCING COPMOUND WALL STATIC TANK SMALL ARMS RANGE AND EXTERNAL PERIODICAL SERVICES TO COMPOUND WALL IN EAST AREA OF AF STATION UNDER GE M AF JALAHALLI

Amount

Dismantaling structural steel work incl doors, gates but excluding framed trusses etc

Supply and fixing MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completFe-290, Gde-E-165.

Dismantling posts or struts (wood, steel, or RCC) any section, including taking out embedded portion in concrete, brick work, masonry etc and all as specified and directed.

Supply and fixing of MS fencing posts/struts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Material and labour for PCC 1:2:4, type B1 (using 20mm thk graded stone aggregate) as in bed plates, including weathering, slightly rounded or chamfered angles and throating,coping etc including necessary form work and all as specified and directed.

Excavation in post holes similar holes each not exc 0.50 Cum getting out returing filling in and ramming earth on broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus spoll to a distance of not exc 50 m and making good surface in hard dense soil

Material and labour for Cement Concrete 1:3:6 type C2 (using 40 mm graded crushed stone agg as in fdn of posts water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Supply and fixing Flat iron welded or jointed in connection with framed work including securing bolts and all necessary drilling, bolting or reverting and similar work conforming to Fe-410-0 complete all as specified.

Dismantling fencing wire mesh of any type

Supply only Chain link MS galvanised fencing any size or type

Fixing only Chain link fencing including line wires any mesh, size and type of any type of standards, rails, straining bolts, etc including provision of binding wires

Supply and fixing Mild steel screw bolts (machine made) 16 to 20 mm diameter of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long and n exc 10 cm long and all as specified and directed

Supply and fixing MS round bars/strengthening bar 10mm dia & over cut to length bent to shape required incl cranking bending spirally for hoping for colm & backing ends and binding with & include MS wire (aheaded ) not less than 0.90 mm dia or securing with clips quality confirming to Fe-410W(grade E-250)Quality A or Fe 290 (gde-E-165).

Supply and fixing in repair galvanised two strand steel barbed wire 2.24 mm dia barbed wire with 2 mm barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised MS wire staples or steel pins etc as directed (each line wire to be measured)

Restraining and resecuring barbed wire including making good staples etc (each line wire to be measured)

Supply and fixing in repair concertina coil of 610mm dia (in stretched position) hot deep galvanised steel wire coated with CLR ante corrosive coating making diamond shape with the help of devotail clips (18 SWG) fixed over barbed with the angle iron the concertina coil is to be fixed with barbed wire at points where coil touched the bottom barbed wire with the help of hog rings (14 SWG) complete all as specified and directed.

Demolition of brick work / stone masonry/PCC block built in cement mortar of any description

Material and labour for walling of random rubble, uncoursed, Bangalore type masonry well bonded bedded solidly hearted built in CM 1:6 as specified and directed.

All as per item No (18) above except stones

Material and labour pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 .

Supply and fixing welded steel wire fabric n exc 4 kg complete fixed to wood or steel members

Taking of broken glass from top of walls and removing the rubbish to a distance not less than 100 m and deposited where directed

Material and labour for broken glass coping 25mm thick on top of walls in cement mortar 1:3 and all as specified and directed.

Material and labour for rendering 15 mm thick CM 1:6 on brick or concrete surfaces finished even and smooth with out using extra cement

Taking down cement plaster of any description incl raking out joints, haking for key scrubbing down with water etc complete

Racking out joints / points in cement mortar to squared rubber masonry coursed or uncoursed

Material and labour for keyed pointed in CM 1:4 for squared rubbel masonry all as specified and directed.

Demolition of Concrete (un reinforced) of any description and in any position not otherwise specifically provided for

Material and labour for Providing cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate in levelling concrete in floor of SWT, laid to slope for further treatment with using integral water proofing compound.(WPC shall be measured separately) all as specified and directed.

Supply only of Liquid water proofing compound

Material and labour for for crack cutting &removing the concrete in side the crack line properly & maintain the groove size(50mmx25mm) of the bldg at any height and then all crack properly filling with micro concrete Renderoc RG and all as specified and directed. .

Material and labour for preparation of new plasterd wall surfaces and applying two coats of cement based paint over a coat of primer and all al specified and directed.

Material and labour for preparation of new steel surface over 10Sqm cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer and all as specified and directed.

Material and labour for preparation of old plastered wall surface and applying one coat of cement based paint and all as specified and directed.

Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of white wash and all as specified and directed.

Material and labour for preperation of old painted surfaces of steel and iron work of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint any tint complete all as specified and directed.

Material and labour for preparation of old external surfaces of walls inclluding cornices, plasters etc(plastered or un plastered surfaces) and applying one coats of exterior emulsion coloured complete all as per manufacture instructions all as specified and as directed.

Material and labour for River sand and saw dust mixed in volumetric proporation 1:1 including laying and spreading upto a maximum depth of 60 cm on slope or an inclined angle of 60 degree upward direction upto a distance of 50 mtrs complete all as specified and directed. Note:- (i) The rates includes for mixing and spreading of Sand and saw dust in proporation 1:1 and laid in slopes or an inclined angle of 60 degree upward direction and necessary consolidation / compaction complete all as directed by Engr-in charge.

Surface excvation not exceeding 30 cm deep and averaging 15 cm deep slope or an inclined angle of 60 degree upward direction and getting out including loosening of sand/soil and removal of grass from roots and picking up stones or brick bats or any other hard material and removal of waste material to a distance of n.exc 500 mtrs.

Taking out sand and saw dust from drain or low laying area or from the side walls and spreading the same over the 'BUTTS' upto to a depth of 60 cm to required slope or an inclined angle of 60 degree upward direction upto a distance of 150 mtrs complete all as specified and directed. Note:- (i) The rates includes for mixing and spreading of Sand and saw dust in proporation 1:1 and laid in slopes or an inclined angle of 60 degree upward direction and necessary consolidation / compaction complete all as directed by Engr-in charge.

Dismantling boarding of any section any description fixed in nails

Supply and fixing of boarding 40 mm thick 2nd class soft wood in any position fixed with nails and all as specified and directed.

Dismantling of scantlings of section under 40 sqcm and over in section in any position unframed work.

Material and labour for of clean saw in 2nd class soft wood scantling and all as specified and directed.

SHIRDE ENTERPRISES

LAKSHMI CONSTRUCTIONS

BYRAVESHWARA CONSTUCTION

SHREE BANASHANKARI ASSOCIATES

Global Enterprises

ADWITHI