REPAIRS TO BLDGS AT MH COMPLEX OF AGE B/R H/L UNDER THE AOR OF GE DEOLALI

Amount

Dismantling of wall and ceiling board(fiblre, pulp, insulation etc) any thickness including cover fillets complete all as specified and as directed.

S & F powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Min Tee runners of size 38mm x 38mm x 1.5mm and cross Tee of size 38mm x 38mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm complete all as specified and as directed.

M & L for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and as directed.

S&F in repair PVC Wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing.

S& F in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing.

Demolition of stone slab and tiles laid bedded and pointed in any mortar description or thickness in floors, apron etc Complete all as specified.

M & L for screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes Complete all as specified.

M & L for Machine cut kota stone slab flooring 20-25mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete complete all as specified.

M & L for Machine cut kota stone slab flooring 20-25mm thick in riser of steps, skirting, dado,window jambs and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and mirror polishing complete complete all as specified.

M&L Non skid coloured ceramic tiles 7 to 8mm thick (Squre/Rectangular) are of each Tile Exc 0.18 Sqm but N exc 0.38Sqm in floors etc, set jointed and pointed in neat cement slurry and pointed in coloured cement to match in floors complete all as specified.

All as per Item No -10 but as a skirting complete all as specified.

M&L for 10mm thick rendering in CM 1:4 as in back coat all as specified.

M&L Ceramic Non-skid colouerd tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc.set and jointed in neat cement slurry with and pointed in coloured cement match the colour of tiles all as spd all as specified.

M&L non skid coloured ceramic tiles ( of approved quality ) 7 to 8mm thick (Squre/Rectangular) are of each Tile Exc 0.06 Sqm but N exc 0.11Sqm in floors etc, set jointed and pointed in neat cement slurry and pointed in coloured cement to match in floors complete all as specified.

M&L Glazed ceramic coloured tiles of size. 350x250x7mm/450x350x7mm thick on vertical surfaces of walls such as skirting dado etc over 10mm thick rendering in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

M & L for chequered cement concrete tiles 30cm x 30cm x 20mm thick Rouber moulded with grey cement and pigment, including 15mm thick scred in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and as directed.

M&L for precast cement concrete interlocking blocks 60 mm thick Rouber mould with strength 35 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed.

M & L for Granite 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing types all as specified.

M & L for Machine cut cudappa stone slab 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.

M&L for 6mm thick asbestos cement corrugated or semicorrugated sheets as in roof, wall coverings fixed with J/L type bolts or cranked hook bolts etc complete all as specified and directed.

M&L for serrated ridge for corrugated or semi-corrugated sheets fixed with ‘L’ ‘J’ type or cranted hook bolts

Dismantling of Single layer Mangalore pattern or similar tiles in roofing including ridge complete all as specified.

Dismantling of battens for tiles, singles etc, of any size including tiling fillets exc 15 cm complete all as specified.

Dismantling unframed work of timber scantlings 40 sq.m and over in any section, in any position complete all as specified.

M & L for Clean sawn 2 nd class hard wood in scantling as a post and rafter complete all as specified.

M & L for second class hard wood clean sawn battens at 30 cm centres exc 15 and n.exc 25 sq.cm complete all as specified.

All as per item No 28 but fixing only complete all as specified.

M & L for roof tiles, mangalore pattern, interlocking at side joint, laid dry complete all as specified.

All as per item no - 30 but except tiles complete all as specified.

M & L for ridge or hip tiles to suit manglore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified.

All as per item no - 32 but except tiles complete all as specified.

S & F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt weided tubes conforming ti I.S 1161-1998 grade St 240 complete all as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

S & F MS flat as in wind ties incl all cutting , bending drilling etc. complete conforming to Fe- 410 'O' or Fe- 310'O'

S & F in repairs second class hardwood for weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps including demolition of wood work complete all as specified.

M & L for Preparing surface of wood and wood based materials, new or old, of any descripion and girth, not otherwise described and treated with two coats of creosote complete all as specified.

M & L for applying two coats of synthetic enamel paint over priming with red oxide over preparation of new surfaces of any description over 10 cm width or girth complete all as specified and as directed.

S&F in repairs for prelaminated particle board 18/19 mm interior grade prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screw timber frame work Including dismantling board all as specified.

S&F in repair continuous (paino) hinges, mild steel, bright finish or electrogalvanised width of flap (when open) in 40mm all as specified.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel bright finished all as specified.

S&F Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixing complete all as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 15 mm dia pipe complete all as specified .

Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 20mm dia pipe complete all as specified .

S & F 15 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

S & F 20 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

S & F in repairs 15 mm dia Stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified.

S & F in repairs 15 mm dia bib taps, cast copper alloy fancy type with chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S & F in repairs 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated with fancy type, screwed down high pressure, with or without lettered 'Hot' or ' Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified.

S & F in repairs Vitreous China wash basin, white, flat back, size 580 x 450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets with 32 mm dia Waste fittings, brass, chromium plated with waste pipe complete all as specified.

S & F 32 mm dia Low density polyethylene pipes ( LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified.

S & F in repair brass chromium plated Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified.

S & F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) white ( excluding fixing bolt, flushing cistern and flush pipe ) complete all as specified.

S & F in repais Vitreous china squatting pan, Orissa pattern size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe )Complete all as specified.

S & F in repairs 10 Litrs PVC valveless,low level flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with 32 mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern complete all as specified.

S & F in repairs Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S & F 75 mm dia PVC ( SWR ) floor trap, plain with grating including jointing with solvent cement complete all as specified.

S & F PVC connections15 mm size with PTMT nuts of length 450 mm complete all as specified.

Dismantling water tanks and removing to store of capacity exc 250 & not exc 500 ltrs.

Dismantling water tanks and removing to store of capacity exc 500 & not exc 1000 ltrs.

Supply and and fixing, hoisting PVC tank of 1000 ltr capacity including Supplied and fixed 20mm dia PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed.

Supply and and fixing, hoisting PVC tank of 500 ltr capacity including Supplied and fixed 20 mm dia PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed.

S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm with grating and union for discharge pipe (excluding flushing cistern ) including waste fitting, waste pipe Complete all as specified.

S&F soap dish chromium plated and type fixed to plugs with CP brass screw fixed in repairs.

S&F in repair CP Basin Mixer for mixing hot & cold water of approved quality.

S&F in repair wall mixture mixing valves incl. three joints to steel pipes or unions 15 mm bore fancy type best quality as per sample approved by GE fixed in reapirs.

S & F floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm.as in repairs complete all as specified.

S & F in repairs ball valve high pressure of PTMT with epoxy coated , aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore complete.( 210 gms weight ) complete all as specified.

S & F in repairs ball valve high pressure of PTMT wiyh epoxy coated , aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 15 mm bore complete.( 142 gms weight ) complete all as specified.

S&F stainless steel plate rack of size not less than 90cmx75cm fixed with stainless steel screw including taking out old unserviceable wooden plate rack as approved by GE complete all as specified.

S&F in repair 15 mm any type of spandle for stop cock, bib tap, pillar tap, wash basin mixer and wall mixer etc all as specified and directed by Engr-in- charge.

S&F in repairs chromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed in repairs.

S & F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed in repairs complete all as specified.

S&F 8mm thick corner glass shelf fixed with brackets and including chromium plated brass screws and wooden/plastic cleats all as specified and directed by Engr-in-charge.

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid Complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plastered surfaces.rendering again 10mm thick in CM 1:4 mixed with Complast - 421 filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 1.5 Sqm including 40 mm dia 0.60 m pipe complete all as specified and as directed.

All as per ite No 78 herein above but for kitchen area n exc 0.50 sqm on plan all as specified and directed.

M&L for special treatment to floor/wall of bathroom with 10mm thick plaster in CM 1:4 with WPC liquid Complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plastered surfaces.rendering again 10mm thick in CM 1:4 mixed with Complast - 421 complete all as specified and as directed.

S&F Health faucet including MS/anodised hanging device fixed in repairs complete all as specified and as directed.

Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc complete all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth ( without using extra cement ) complete all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth ( without using extra cement ) with sagol finish on plastered surface complete all as specified and as directed.

M&L for applying two coats of cement base paint over chalk whitening newly plastered surfaces of walls including preparation of surfaces all as specified.

M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over 1.5mm thick wall care putty over one coat of chalk whitening primer complete.

M & L for applying two coat of white wash over prepation new surface complete all as specified.

Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified.

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection complete all as specified and directed.

Demolition of brick work or stone/boulder masonary, laid in cement mortar or cement lime mortar complete all as specified.

M&L for fly ash bricks, straight or curved on plan n.exc 6m mean radius in cm 1:6 using old size brick complete all as specified.

Taking down shutters of any description exc 2 sq.m each complete all as specified.

M & L for 2 nd class hardwood as glazed and skeleton shutters 35 mm thk open rebated and prepared to receive glass, gauze, etc (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutter as specified in SSR Part l, section 8, clause 8.24 ( a ); supplied and fitted to chowkats complete all as specified and as directed.

All as per item no-93 but divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars, any numbers (30 mm thk) complete all as specified and as directed.

Taking down chowkat or frame with shutters (with out taking off shutter from the frame ) not exceeding 1.5 Sqm each as directed by Engineer-in-Charge.

Taking down chowkats or frames exc.1.5 sq.m but not exc. 4 sq.m each but with shutters ( without taking off shutters from the frame ) and removing to or from store complete all as specified and as directed.

Taking down shutters of any description exc 1 sq.m and n.exc 2 sq.m each store complete all as specified and as directed.

S & F 35 mm thick second class hardwood plain,framed,panelled shutters ( any number of panel ) with panels of timber flat on both sides (feather edged ) or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to choukats complete all as specified.

M & L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified.

M & L Factory Made Solid PVC Moulded Door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with particle board core with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S & F powder coated aluminium doors, shutters, side hung type with sash bars, locking rails, locking arrangements and hydraulic door closing arrangement including necessay joinery cleats, glazing clips, rubber packing, howkats aluminium snap beading, screws, suitable handle etc with and including tintet sheet glass or ordinary glasing quality of 5mm thick size of lock rails 44.45x81.50mm side rails 85x44.45mm top rail 83.5x44.45mm, bottom rail 101.6x44.45mm and size of chowkat frame 101.6x44.45mm and thickness of aluminium member 1.40mm thick complete all as specified.

S & F powder coated aluminium sliding window,three track shutters, side hung type with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, Chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 5mm thick and incl GI wire mesh 0.56 mm nominal dia of wire and average width of aperture 1.18 mm , size of side rails , top rails , bottom rail 85x44.5mm and size of chowkat frame 101.6x44.45mm and thickness of aluminium member shall be 1.40mm thick complete all as specified.

S&F in repair 25mm dia Drapory Rod aluminium powder coated with end fittings not less than 75gms each and fixed with steel screw to walls complet all as specified and directed.

M&L for preparing old decorative plastered surface of walls by removal of existing treatment washing rubbing down and applying two coats of distemper oil emulsion oover a coat of chalk whiting primer over one coats of care wall 1.5mm thk putty all as specified and directed by engr-in-charge.

All as per above here-in-before but as on ceiling complete all as specified

S&F in repairs door closer hydraulically regulated of aluminium (die cast ) body designation No-2,universal type,suitable for door shutters of 701 to 850 mm in width and of wight between 36 to 60 kg and fixed all as specified and as directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloly sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty.

S&F in repair PVC water jet for pedestial pattern water closet of 15mm bore and 600mm long all as specified.

S&F 18 mm thick Plywood BWR type BB, fixed with screws to timber frame work all as specified and directed.

S&F flush shutter ,solid core construction ,with block board core and plywood face panels ,commercial type on both faces including teak wood beading 6mm thick all around ,30 mm thick all as directed.

M&L for decorative laminate type I,of surface finish ,colour and pattern as approved fixed with approved adhesive as per maker's instruction, 0.9mm thick laminate

S & F extruded Brass handles, fabricated type polished 150 mm complete all as specified.

S & F brass , barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed in repair 200 mm complete all as specified.

S & F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed 250mm complete all as specified.

S & F brass , sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed 300mm complete all as specified.

S & F floor door stpper of brass , body and tongue with hard drawn steel spring 140mm overaii length of cover plate complete all as specified.

S & F Butt hinges, extruded Brass with mild steel hinge pin, bright polished and fixed 125 mm length complete all as specified.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm.with 32 mm dia Waste fittings, brass chromium plated.

S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes.

S&F in repair for glavinized mild steel wire cloths 0.56mm nominal dia and avrage width of apreture 1.18mm & fixed with tint tacks or glavinized wire staples all as specified.

S & F in repairs 300 mm long MS helical door spring, inclunding roller and roller plate complete complete all as specified.

S & F Butt hinges, medium weight, stainless steel, and fixed 100 mm length complete all as specified.

S & F Aluminium handles, cast type, anodised handle 150 mm complete all as specified.

S & F Aluminium, anodised, barrel tower bolts, of extruded section and fixed 150 mm complete all as specified.

S & F Butt hinges, medium weight, cold rolled mild steel, and fixed 75 mm length complete all as specified.

S & F 250mm aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type ) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

M & L for Cement concrte Type C1 1:3:6 ( using 20 mm graded stone aggregate ) as in roof kerbs or mud stops, rounded or chamfered on edges all as specified.

S & F Mild steel as hold fasts Fe.290.Gde-E-165 complete all as specified.

M & L for applying two coat of synthetic enamel paint of wooden surface over a coat of pink primer including preparation of new surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified.

M & L for Cement concrete as PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundations,filling and mass concrete complete all as specified.

Taking down shutters of any description n.exc 1 sq.m each complete all as specified and as directed.

S&F framed work such as grills, gratings, etc with ends of bars, shouldered and /or riveted, or forged into spicks, framed guard bars, ladders, framed balusters, walk ways, railings, framework of water tankd and similar work conforming to Fe 410-O all as specified.

Dismantling PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and directed by Engr-in charge..

S&F PVC (SWR) pipe 110 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and as directed.

S&F PVC (SWR) pipe 75 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends with access door 110 mm dia complete all as specified and as directed.

Ditto as per item No 139 above but 75 mm dia.

S&F PVC (SWR) plain bend 110 mm dia complete all as specified and as directed.

S&F PVC (SWR) plain bend 75 mm dia complete all as specified and as directed.

S&F PVC (SWR) branch piece single or double T equal or unequal with access door 110 mm dia complete all as specified and as directed.

All as per Item No 143 but 75 mm dia.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and as directed.

M & L for preparation of old distempered surfaces of wall including washing rubbing down and stopping distempered surfaces and applying one coat of oil bound distemper (White or tinted) on walls complete all as specified.

All as per item No.146 above but two coats of oil emulsion distemper.

M&L for preparation of old painted wood & wood based surfaces of any description, not otherwise described over 10cm width or girth and evenly applying one coat on synthetic enamel paint complete all as specified and as directed.

All as per item No. 148 above but on steel & Iron surfaces.

S&F 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated,complete: push pull or manual type complete all as specified and directed by engr-in-charge.

M&L for rendering 5mm thick plaster in CM (1:3) on faces of brick work or concrete on surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed.

S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified.

S&F frosted glass 4.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes.

S&F 12 mm thick Plywood BWR type BB, fixed with screws to timber frame work all as specified and directed.

S&F in repais for prelaminated particle board 9 mm interior grade prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screw timber frame work Including dismantling board all as specified.

Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness,wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall,PCC fillets,benching etc and removing of the rubbish to a distance not exceeding 500 M from the building and depositing where complete all as specified and directed.

Demolition of cement concrete of any description (Unreinforced) below or above ground floor incl concrete at junctions of parapets and roof terraces, flashings, Kerbs walls,PCC fillets, benching,coving of chajjah top/junctions etc complete all as specified and directed.

Supply only integral water proofing compound.

M &L for providing plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) for roof, kerb, or mud stops,rounded or chamfered on edges etc complete all as specified and as directed .

M&L for rendering 10mm thick CM (1:4) on roof slab top, mixed with water proofing liquid finished even and fair without using extra cement complete all as specified. Note: Water Proofing liquid shall be measured and paid separately.

M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply one coat of oil bound bituminous primer @ 0.25 kg/Sq.M ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.5 Kg / Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturer's iii) Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesble roof surfaces complete all as per manufacturer's instructions and as directed .

Note: Amount of sch of credit of Rs.69,195/-will be deducted from total amount of BOQ.

M/S SAMPADA CONSTRUCTIONS

SHYAM CONSTRUCTION

Alpha Construction

J Sams Contructions