Providing Internet connection to KDH Check post, Dakra Check post, KDH WB 05 and VIP via OFC by extending existing network under NK Area

Amount

OFC Cable type Stranded loose tube Construction type Un-Armored Subunit type Gel-filled (Thixotropic gel) Moisture barrier Flooding gel (Thixotropic gel) Core wrapping Polyester tape Outer sheath (≥1.8 mm) High density polyethylene, anti -termite, anti -rodent suitable for laying through PLB HDPE duct. Number of fibers/ loose tube 4 Fiber Strength Fiber Reinforced plastic (FRP)rod Fiber Type Single mode Fiber Core Diameter 9 ±0.4 μm Cladding Diameter 125 ±1μm Coating Diameter 250 ±10 μm Effective Group index of Refraction 1.468 at 1310 nm; 1.468 at 1550 nm Fiber cut off wavelength ≤ 1260 nm Overall diameter ≥ 11 mm and ≤ 16 mm (±0.5 mm) Minimum Bend radius 20 X Outer Diameter Tensile Strength ≥ 2500 N Crush resistance ≥2000 N/10cm Weight ≥120 (±10%) Kg/Km Refractive Index Difference 0.36% Polarization mode –dispersion co-efficient <0.5ps/sqkm @1310 nm & 1510 nm Core clad Concentricity ≤ 0.5 μm.

Simplex Fiber Optic Patch Cord SC - SC

Splice Closure for Optical FiberCables Armoured and Metal freetype OFC With screws sealing

Media Converter Auto-Negotiation (802.3u) The media converter supports auto negotiation. The 1000Base-X fiber interface negotiates according to 802.3 clause 37. The 10/100/1000Base-T negotiates according to 802.3 clause 28 and 40. The 1000Base-X will link up with its partner after the highest common denominator (HCD) is reached and the copper has linked up with its partner. The 1000Base-X will continue to cycle through negotiation transmitting a remote fault of offline (provided this is enabled through the switch setting) until the copper is linked up and the HCDs match. The media converter supports auto-negotiation of full duplex, half duplex, remote fault, full duplex pause, asymmetric pause and Auto MDI-X.

Cat 6 Cable 1 Meter Patch Cord: Technical Specification:Category : 6 UTP Solid cable Conductor : Conductor : 23 AWG (Solid)Conductor Meta : Conductor Meta : Bare Copper Insulation Material : HD-PE OD : 6.1mm ±0.2 Resistance Unbalance : 5% Max Capacitance Unbalance : 330pF/100m Delay Skew : <45nS

Ethernet LAN PORT Router: Technical Specification: Type of Router WAN No of Gigabit Ethernet (10/100/1000 Base-T ) Interface Ports 4; No Of Serial WAN Port 0 Type of 1G SFP a Fiber-Single Mode - 4 no b Fiber-Multi Mode - 2 no c Copper – 4 No 0No of 10G SFP+ Slot (Fiber / Copper) 0 No of v35 WAN Interface 0 No of E1 (G703) WAN Interface 0 Number of Gigabit Ethernet (10/100/1000 Base-T ) LAN Ports 4

Erection/Installation /Cost of above items.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

Splicing / jointing of Fiber Optical Cables with splice loss of fiber with MFD 9.3um with fiber of range 8.8 ~ 6.9um, Core Clad Concentricity in today's G652 single mode fiber is <0.5um and offset is in opposite directions (total 1um offset), the contributed loss will be 0.056dB.

Total impact of GST for the purpose of CTC