CERTAIN REPAIR WORKS OF B/R AND E/M NATURE IN CENTRAL INSTITUTES INCL PERIODICAL SERVICES UNDER AGE B/R-II PATIALA

Amount

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified.

Demolition of mud phuska on roof any thickness all as directed.

M & L for Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified.

M&L PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregates as in padding over roof, minimum thickenss at khurra as 25 mm to maintain a slope of 1:40, complete all as specified and directed.

Supply only Water proofing compound complete.

M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply one coat of oil bound bituminous primer @ 0.40 kg/Sq.M ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3 Kg / Sqm reinforced with non woven polyester mat weighing not less than 150 gm/Sqm applied by torch application having side over lap 75 mm and at the end 100 mm including sealing the joints all as specified procured from any one of the approved manufacturer's iii) Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesble roof surfaces complete all as per manufacturer's instructions and as directed .

M&L for rendering 10mm thick CM (1:4) on roof slab top, mixed with water proofing liquid finished even and fair without using extra cement complete all as specified. Note: Water Proofing liquid shall be measured and paid separately.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.

Dismantling unframed work of timber scantlings 40 sq.m and over in any section, in any position complete all as specified.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete including dismantling, all as sepcified and directed.

S&F pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete, all as sepcified and directed.

M&L for preparation of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete.

S&F MS work in tubular/pipe/angle sections for frame work for roof, vertical poles, s rafters and purlins including washer etc complete all as directed.

Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified.

Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed

M&L for machine cut kota stone slab as in flooring of size 580 x 580 mm each & 18-20 mm thick, set and jointed in cement slurry laid over 20 mm th screed in CM 1:4 complete all as specified. Note : 1. All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained. 2. The colour of the slabs shall be uniform.

M&L for single charge, vitrified, stain & scratch resistant, joint free, premium quality coloured tiles area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc mm and 9-10 mm thick, in any pattern of light & dark tiles as approved, laid over 15 mm thick screed in CM 1:4 complete all as specified and directed.

All as per item NO 17 above but as in skirting over 10 mm th rendering in CM 1:4

M&L for , vitrified tiles , joint free, premium quality coloured tiles 600 X 600 mm and 8-10 mm thick, as in floors/skirting etc. in any pattern of light & dark tiles as approved, laid over 15 mm th screed in CM 1:4 complete all as specified and directed.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for anti-skid ceramic joint free premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. and pointed in white cement with pigment to match the colour of tiles laid over 15 mm th screed in CM 1:4 complete all as specified.

M&L artificial Granite 16-18 mm thick work (of any type) (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including nosing edges and chamfered laid over 20 mm th screed in CM 1:4 complete all as specified

Providing and Laying Premium (1st) quality straight edge, ceramic tiles exterior grade scratch resistance of size 300x300x7 to 8 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc set and including 15 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match complete all as specified.

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border etc only in tile flooring and the like works and flooring etc, 16-18 mm thick laid over 20 mm th screed in CM 1:4 including bull-nose the front length, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishing and including dismantling/demolition complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

M& L for 25mm thick PCC 1:2:4 type BO using 12.5 mm graded stone aggregate as in floor complete as specified and directed.

M & L 75mm thick PCC 1: 4: 8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L 60 mm thick rubber moulded, lacqured finished, coloured Machine pressed precast concrete interlocking of M-35 paver block any shape and size confirming to IS 15658 - 2006 filled with grey cement and pigment over sand cushioning 25mm thick, complete all as specified

M&L 25mm thick factory made coloured interlocking designer polished floor tiles (Ultra pattern) of Grade M-35 of shape and size as directed,and 100mm x 100mm size tiles piece on every joint of tiles flooring laid over & including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed . Note: Sample shall be got approved from GE before commencement of work

Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position / height( single storey/ double storey/ tripple storey) by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes, including scaffolding upto tripple storey, complete all as specified and directed.

Demolition of brick work built in cement mortar complete.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 all as specified.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:4 , mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement including WPC complete all as specified.

M&L for Rendering 10 mm thick in cement mortar 1:6, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement complete all as specified.

M&L for Rendering 5 mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement all as specified.

M&L for preparation of new plastered surfaces of walls /RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc and applying 02 coats of exterior emulsion paint (light shade) by using roller over & including a coat of exterior wall primer and over a coat of acrylic wall care putty to make the surfaes smooth complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls /RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc and applying 02 coats of interior emulsion paint (light shade) by using roller over & including a coat of exterior wall primer and over a coat of acrylic wall care putty to make the surfaes smooth complete all as specified and directed.

M&L for preparation of new plastered surfaces of Ceiling applying 02 coats of interior emulsion paint (light shade) by using roller over & including a coat of exterior wall primer and over a coat of acrylic wall care putty to make the surfaes smooth complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc by rubbing down/scrapping down loose/pealed treatment and applying one coats of exterior emulsion paint (light shade) by using roller to external surfaces complete all as specified and directed.

M&L for preparation of old plastered/unplastered surfaces of walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc by rubbing down/scrapping down loose/pealed treatment and applying 02 coats of exterior emulsion paint (light shade) by using roller to external surfaces over & including a coat of acrylic wall care putty to make surfaes smooth, where ever required smooth including complete removal of existing treatment on existing surfaces all as specified and directed.

M&L for preparation of old plastered surfaces of walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc by rubbing down/scrapping down loose/pealed treatment and applying One coats of oil bound distember paint (light shade) by using roller/Brush to internal surfaces over & including a coat of acrylic wall care putty to make surfaes smooth, where ever required smooth complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc by rubbing down/scrapping down loose/pealed treatment and applying two coats of oil bound distember paint (light shade) by using roller/Brush to internal surfaces over & including a coat of acrylic wall care putty to make surfaes smooth, including complete removal of existing treatment on existing surfaces where ever required smooth complete all as specified and directed.

M&L for preparation of old plastered/unplastered surfaces of Ceiling/false ceiling etc by rubbing down/scrapping down loose/pealed treatment and applying 02 coats of interior emulsion paint (light shade) by using roller to ceiling surfaces over & including a coat of acrylic wall care putty to make surfaes smooth, whereever required smooth including complete removal of existing treatment on existing surfaces complete all as specified and directed.

M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M & L for preparing old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying one coats of cement base paint complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

Complete removal of existing treatment including washing rubbing down and stopping of painted surfaces and applying 1-2 mm thick metallic texture painting (Top quality) on walls in any colour/shade/pattern/design including preperatory work for base by applying primer/putty coat by any authorised applicator of manufacturer of paint complete all as specified and directed by Engr-in-charge.

Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete al as specified and directed.

S&F PVC hollow Wall panelling of thickness 5 mm of any colour/pattern as directed complete fixed to walls in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent beads etc

M&L solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC as per specification & drawing of make-Rajshree/sintex or equivelnt.

M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per spection & drawing.

M&L of false ceiling in step(s) comprising of 12mm thick Gyp board including GI frame work for seamless ceiling made of GI perimeter channel 0.55mm thick with two unequal flange of 20 to 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screw at 450 mm centre to centre intermediate channel 0.9mm thick having two equal flange of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thicknesshaving kurledweb of 50mm and flangeof 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre with and including two coats of plastic emulsion paint complete all as directed. Make-India Gypsum/Gyproc/Lafarge.(Note:- The measurement shall be made from wall to wall without considering step(s).

S&F Poly coated GI Frame work as in grid for False ceiling comprising of protected GI perimeter channel 0.55 mm thick with two uneual flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon selves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having to equal flanges of 15 mm each and web of 45 mm suspended from soffit and approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and hangers 6 mm dia GI (up to 1200 mm length adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x3 mm size 60 mm long complete with and incl 7 mm thick PVC laminated gypsum tiles of size 595x595 mm of approved design complete all as specified and directed by Engr-in-charge.

M & L as in repairs for 8 mm thick prelaminated wooden flooring laid over existing concrete surface by the manufacturer as approved bspecfied below:- (a) 125 micron polythene sheet (as vapour barrier) laid over existing concrete surface inclding taking all necessary steps to make the levelness and smoothness of existing concrete surface and achieve moisture free conditions. (b) 5 mm thick thermocole sheet over polythene sheet. (c) 8 mm thick prelaminated wooden flooring.

M&L preparation of surfaces applying two coat of silver paint complete all as specified and directed

M&L for Powder coated Anodised aluminium frames and shutters for doors, with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. Each Door shutter to be provided with following fittings a) Powder coated Al Tower bolt 150 mm - 02 Nos b) Powder coated American type al handle 100 mm - 01 Nos on each leaf c) Powder coated Al Hinges 100 MM - 03 Nos on each leaf d) Hydrulic door closer - 01 No e) Mortice lock 250 mm with two keys - 01 Nos

M&L for Powder coated Anodised aluminium frames and shutters for windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. Each window shutter to be provided with following fittings a) Powder coated Al Tower bolt 150 mm - 02 Nos b) Powder coated D type al handle 100 mm - 01 Nos on each leaf c) Powder coated Al Hinges 100 MM - 02 Nos on each leaf d) Powder coated aluminium hook and eye of suitabel length adjustable -01 Nos

Taking down Aluminium door / window shutters for repairing and re-fixing in same opening including tightening frame etc all as specified and directed as under:- (i) Rectification of open joints by refixing of cleats, tightening of screws (ii) Replacement of unserviceable rubber beading of aluminium door / window shutter glass pannels etc all as specified and directed. (iii) Replacement of unserviceable satinless steel butt hinges (iv) Replacement of unserviceable brass mortice lock of size 75mm with 4 lever complete all as specified and directed. (v) Replacement of unserviceable PVC panel inserts 5mm thick

S&F 12mm thick high density fibre board pre-laminated on both sides (water proof) as in patation/door panels fixed with and including EPDM gasket to render the glazing, air and water tight etc aluminium beading of size as required complete all as specified and directed by Engr-In- Charge

S&F 5mm thick tinted glass for aluminium windows/Door including EPDM gasket to render the glazing, air and water tight etc and power coated aluminium beeds 20 mm size complete.

S&F 5mm thick frosted glass fixed to aluminium ventilator including necessary EPDm gasket to render the galzing, air and water tight etc and powder coated aluminium beeds 20mm sized complete.

S&F stainless steel wire gauge 0.36 mm nominal dia of wire and average width of aperture 1.40mm to be fixed in Powder coated aluminium door/windows/ ventilators etc complete.

S&F in repairs Sheet glass ordinary quality 4 mm thick and glazing with oil puttly or wooden beads in square exceeding 0.5 sqm in each pane complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

S&F for factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 100 mm X 65 mm size, applying PVC solvent cement and screwed with full body threaded, star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with mild steel hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engr-in-Charge.

All as per tem no 68above but frame size 65x125mm double rebate.

S&F 28-30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F 28-30 mm thick moulded WPC factory made 100% Sketon/Glased door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F factory made WPC extruded board CNC machine cut jali fixed to Skelton door as per approved design complete all as specified and directed

S&F stainless steel (304 grade) finished butt hinges 125mm complete all as specified and directed

S&F powder coated aluminium tower bolt 200mm long complete

S&F powder coated aluminium handles 150mm complete

S&F powder coated aluminium hook and eye of suitable length adjustable to aluminium window shutters compete

M&L for 250mm long Brass, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F 18 mm thick Plywood BWR type BB, fixed with screws to timber frame work all as specified and directed.

S&F factory made flush shutter ,solid core construction ,with block board core and plywood face panels ,commercial type on both faces including teak wood beading 6mm thick all around ,30 mm thick all as directed.

M&L for decorative laminate type I,of surface finish ,colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction, 0.9mm thick laminate complete all as specified and as directed.

S & F extruded Brass handles, fabricated type polished 150 mm complete all as specified.

S & F brass , barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 200 mm complete all as specified.

S & F brass , sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed 300mm complete all as specified.

S & F floor door stpper of brass , body and tongue with hard drawn steel spring 140mm overaii length of cover plate complete all as specified.

S&F for prelaminated particle board 18/19 mm interior grade prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screw timber frame work Including dismantling board all as specified.

S&F in repair continuous (paino) hinges, mild steel, bright finish or electrogalvanised width of flap (when open) in 40mm all as specified.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel bright finished all as specified.

S&F Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixing complete all as specified.

S&F in repair CP Basin Mixer for mixing hot & cold water of approved quality. MAKE: Cera,Hindware,Jaquar

S&F in repair 8mm thick corner glass shelf fixed with brackets and including chromium plated brass screws and wooden/plastic cleats all as specified and directed by Engr-in-charge. MAKE: Cera,Hindware,Jaquar

S&F in repairs door closer hydraulically regulated of aluminium (die cast ) body designation No-2,universal type,suitable for door shutters of 701 to 850 mm in width and of wight between 36 to 60 kg and fixed all as specified and as directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloly sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty.

S&F Kitchen cabinets including all fittings and fixtures incl the follwing. (a) 19mm thick plywood of commercial block board,Make: kitply or Duro. (b) 1mm thick commerical lamination on both side fixed to black board(colour and design as approved) (C) SS pullout basket SS finish of plain 15'' x 20'' x 6'' (D) 'D' type handle 100mm SS finish (E) Pullout basket SS finish cutlery wire of size 15''x20''x4'' (F) 2nd class hard as in frame work (G) SS channels for pullout basket as required. (Note:- The measurement shall be taken from front elevation and not girthwise.

S&F Stainless steel 25mm bore as in curtain rod complete incl fixing fancy type brackets, stops etc all as specified & directed as in repair (For the purpose of measurement and payment running length of curtain rod only shall be considered).

S&F for Rotational moulded polythene water storage tank cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position incl 20 mm ball cock, connecting to inlet or outlet and washout including disconnecting and demolition of existing tanks of any description.

S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, CI 'P' or 'S' traps 100mm & PVC flush pipes 32mm dia including connecting to trap and to flushing pipe, anti-syphonage pipe etc including all joints and making good to floor all as specified

S&F in repair PVC 10 litre capacity valve less syphonic action type, flushing cistern, low level, white/coloured with inlet ball valve, float, pvc bend and handle including brackets, etc. complete all as specified by Engineer in Charge.

S&F in repair Vitreous china urinal,half stall type, of size 330x300x450mm incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, waste coupling 32mm , bottle trap, pointing urinal back in cement; connection for discharge pipe incl necessary packing,union and 15mm CP urinal spreader and CP connection pipe complete all as specified. Make : Hindware, Waste Coupling (Economy Model), Bottle Trap (Economy Model) or equivalent from Parryware/Cera as approved by Accepting Officer.

S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position all as specified and directed.

S&F in repair for toilet paper holder stainless steel Coomplete all as specified and directed. MAKE: Cera,Hindware,Jaquar

S&F vitreous china premium/1st quality wash basin (under counter), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer incl. CP waste coupling , 32 mm dia flexible pipe complete fixed in position in all respect as per directions and taking down existing of any description/size all as specified.MAKE: Cera,Hindware,Jaquar

S&F vitreous china premium/1st quality wash basin (counter top), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified.MAKE: Cera,Hindware,Jaquar

S&F vitreous china premium/1st quality wash down water closet wall hung EWC white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size complete in all respect all as specified.MAKE: Cera,Hindware,Jaquar

S&F concealed flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and making space/cavity in existing brick work wall for fixing and taking down existing of any description/size complete in all respect all as specified.MAKE: Cera,Hindware,Jaquar

Repairing/rectifying complaits of alredy insallted concealed wall flusing cistren of any ake/shape, including supply of parts required to make the system functional.

S&F vitreous china premium/1st quality wash down water closet single piece EWC S/P trap white/ivory/off white including connection to drain (or out going pipe), antisyphonagee pipe,etc.,and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mm complete and taking down existing of any description/size complete in all respect all as specified. Make : Cera or equivalent from Parryware/Hindware as approved by AO

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete in all respect all as specified.MAKE: Cera,Hindware,Jaquar

S&F in repair health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.MAKE: Cera,Hindware,Jaquar

S&Fin repair Angular Stop Cock with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. MAKE: Cera,Hindware,Jaquar

S&F in repair fancy type, chromium plated long body bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete.MAKE: Cera,Hindware,Jaquar

S&F stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified .

S&F in repair Single liver 3-inlet divertor consisting of exposed parts kit with operating lever, wall flange and button and concealed body for 3-inlet single lever divertor with button assembly, cartidge sleeve and also including spout with wall flange chromium plated, screwed down high pressure complete all as specified and directed by Engineer in Charge. MAKE: Cera,Hindware,Jaquar

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified.

S&F for UPVC pipe fixed on wall/ceiling or laying in floor of 15mm bore fittings.

Taking up or down existing steel tubing and connections, 20mm bore complete all as specified.

S&F for UPVC pipe fixed on wall/ceiling or laying in floor of 20mm bore fittings.

S&F Sensor urinal as in repairs (Enigma Mu Sense With Integrated Sensor as directed by engineer-in-charge MAKE: Cera,Hindware,Jaquar

Reairing/rectifying complaits of alredy insallted sensor urinals of any make /shape, including supply of parts required to make the urinals functional

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15 mm bore complete all as specified.MAKE: Cera,Hindware,Jaquar

S & F in repair brass shower rose 125 mm size (Chromium plated) with swivel joint complete, suitable for 15 mm bore iron pipe complete all as specified.MAKE: Cera,Hindware,Jaquar

S&F 10- 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including all necessary fittings (patches, connectors, brackets etc) all as specified and directed

S&F stainless steel of grade 304, chromium plated glass door lock complete all as specified and directed

S&F stainless steel of grade 304, chromium plated a pair of H type handle of 32 mm dia and length 300mm as specified and directed

M&L Cement screed bed/plaster on parapets 20mm thick in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on surface of roof etc finished even and fair and making strip of size 30 cm x 30 cm by complete including cleaning the surface and made for free of dirt foregin particles and applying 2 coats of Damp proof chemical as per manufavturers instruction.

M & L factory made coloured chequred cement concrete tiles 30 cm x 30 cm x 20mm thick,made of grey cement set and jointed in neat cement slurry with grey cement and pigments as in floors to match the shade over screed bed or bedding layer or mortar 20 mm thick in cement mortar 1:4 for laying floor finished, complete all as spcified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with arreangement complete as specified and directed

Taking down carefully existing points wiring on surface conduit/concealed conduit for light/ fan/socket /power/ bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, piece of wires,gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc all as specified and directed.

M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH(FLAME RETARDANT LOW SMOKE AND HALOGEN) single core multi-stranded copper conductor for one light/fan and including new PVC rigid concealed conduit medium grade 19/20 mm dia, chesing and cementing work to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment required for fitting of flush and junction boxes all as specified and directed (Switches and regulators shall be measured and paid for separately.) ( Wiring shall be done as per colour code in IS for phase, neutral and earth) (In case of Modular: Modular cover plate and metal flush boxes incl in Point wiring) NOTE:- 1.The contractor must produce certificate of FRLSH wire as well as on site testing of FRLSH wire.

All as per Sl item No 128 above herein before but one 5Amp socket point on independent board but with other switches complete all as specified and directed.

All as per Sl item No128 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

All as per Sl item No 128 above herein before but one socket out let 3 pin 15 Amp Independent with 2.5 sqmm wire including 1.5 sqmm PVC insulated and unsheathed FRLSH single core stranded copper earth continuity conductor complete all as specified and directed.

M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH(FLAME RETARDANT LOW SMOKE AND HALOGEN) single core multi-stranded copper conductor for one light/fan in existing conduit to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed. (Switches and regulators shall be measured and paid for separately.) (Wiring shall be done as per colour code in IS for phase, neutral and earth) (In case of Modular: Modular cover plate and metal flush boxes incl in Point wiring). NOTE:-1.The contractor must produce certificate of FRLSH wire as well as on site testing of FRLSH wire. .

All as per Sl item No 132 above herein before but one 5Amp socket point on independent board but with other switches complete all as specified and directed.

All as per Sl item No 132 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

All as per Sl item No 132 above herein before but one socket out let 3 pin 15 Amp Independent with 2.5 sqmm wire including 1.5 sqmm PVC insulated and unsheathed FRLS single core stranded copper earth continuity conductor complete all as specified and directed.

S& F Modular switch 1 way, 6 Amps, 1 module complete all as specified and directed.

S & F Modular switch 1 way, 16 Amps, 1 module with indicator lamp complete all as specified and directed.

S & F Modular socket 5 pin 6 Amps, 2 module complete all as specified and directed.

S & F Modular socket 5 pin 6/16 Amps, combination type 2 module complete all as specified and directed.

S & F fan regulator modular type 2 module 6 step complete all as specified and directed.

S&F ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed.

S& F Modular Bell switch 1 way, 6 Amps, 1 module complete all as specified.

Suppy and fix bell ding dong type AC 230 volts complete all as specified and directed.

S&F incl taking down 20 watt wall mounted, new generation LED batten fitting 4 feet with polycarbonate diffuser andextruded thermoplastic body > 90 lumen/watt having correleted color temperature(CCT) of Emitting light 6500/3000 K with CRI of LED >90 . including all fixing accessories & connecting up with PVC insulated twin core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix incl taking down 36 watt recessed mounted LED luminaire (cool white) suitable for armstrong/grid ceiling ( 2X2) with super bright LED fittings minimum 100 lumen/watt with connector block etc with short circuit protection , open protection , reverse polarity protection , high voltage protection complete with all accessories pre wired having correleted color temperature(CCR) of Emitting light 6500 OR 3000 K(According to requirement) with CRI of LED >90. and including cconnection with twin core twisted flexible copper conductor cable .75X2 Sqmm complete all as specified and directed.

Supply and fix incl taking down 36 watt recessed mounted LED luminaire ( warm white) suitable for armstrong/grid ceiling ( 2X2) with super bright LED fittings minimum 100 lumen/watt with connector block etc with short circuit protection , open protection , reverse polarity protection , high voltage protection complete with all accessories pre wired having correleted color temperature(CCR) of Emitting light 6500 OR 3000 K(According to requirement) with CRI of LED >90. and including cconnection with twin core twisted flexible copper conductor cable .75X2 Sqmm complete all as specified and directed.

Supply and fix incl taking down antique look decoretive surface mounted classic living room wall light ( cool white) with base cap B22/E27 body made with METAL and glossy GLASS having fitting capacity upto 20 watt. connection with twin core twisted flexible copper conductor cable .75X2 Sqmm with proper clamps complete all as specified and directed by Engr in Charge.

Supply and fix incl taking down antique look decoretive surface mounted classic living room wall light( warm white ) with base cap B22/E27 body made with METAL and glossy GLASS having fitting capacity upto 20 watt. connection with twin core twisted flexible copper conductor cable .75X2 Sqmm with proper clamps complete all as specified and directed by Engr in Charge.

Supply and fix incl taking down Led Stellar Square/round recessed Mounted slim and and Elegant Downlight /Panel light(cool white) for indoor application with high aesthetic appeal of capacity 12 watt, minimum 100 lumen/watt having correleted color temperature(CCR) of Emitting light 6500 OR 3000 K(According to requirement) with CRI of LED >90.complete with all electrical connection up with PVC insulated twin core flexible copper conductor cable of suitable sizecomplete all as specified and directed.

Supply and fix incl taking down Led Stellar Square/round recessed Mounted slim and and Elegant Downlight /Panel light(warm white)for indoor application with high aesthetic appeal of capacity 12 watt, minimum 100 lumen/watt having correleted color temperature(CCR) of Emitting light 6500 OR 3000 K(According to requirement) with CRI of LED >90.complete with all electrical connection up with PVC insulated twin core flexible copper conductor cable of suitable sizecomplete all as specified and directed.

S&F MCB DB double door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for 8 ways with IP43 protection complete all as specefied and directed. (Note: MCB should be B or C curve as directed by engineer in charge)

S&F MCB , SPN, 240 Volt , 40 amp for fixing in DBs of including proper thimble connections complete all as specified and directed. (Note: MCB should be B curve as directed by engineer in charge).

S&F MCB, single pole 240 volts 6 to 32 Amp capacity fixing in DB’s including proper thimble connections complete all as specified and directed. (Note: MCB should be B curve as directed by engineer in charge)

S&F MCCB DB VTPN 4 WAYdouble door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for ways with IP43 protection complete all as specefied and directed. (Note: MCCB should be B curve as directed by engineer in charge)

S&F MCCB , TPN, 240 Volt , 100 amp, 25 KA for fixing in DBs of including proper thimble connections complete all as specified and directed. (Note: MCCB should be B curve as directed by engineer in charge)

Earthing complete with galvanised steel earth plate electrode, 600x600 x 6.0mm thick buried directly in ground(earth pit not less than 2.25m deep below normal level) connected to galvanised earth lead wire 4.0mm dia by means of nuts, bolts, & washers of GI as shown in electrical plate No 3 of SSR Part I. Connected to earthing test point testing complete including necessary earth pit chamber PCC 1: 3: 6 type C1, and 50mm thick RCC 1 : 2: 4 chamber cover and with 8mm dia mild steel re-enforcement of 15Cm C/C spacing both ways with a handle made of 8 mm bar for fitting, galvanised iron funnel, wire mash watering pipe GI 20 mm dia light grade, and protection to earth lead shall be provided with GI pipe light grade 15mm dia up to 7.5m from the earth plate electrode, excavation, charcoal and common salt mixed refilling of soil etc complete all as directed. Test Sheet having Earth resistance value less than 3 ohm will be submitted by contractor.

Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2(two) Runs of 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 4.00 Sqmm Copper conductor Earth wire shall be measured as one unit) Note 2 :(i) Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth . (iii) Including taking out/down existing unserviceable sub main wiring.

Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 4.00 Sqmm Copper conductor Earth wire shall be measured as one unit) Note 2 :(i) Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth . (iii) Including taking out/down existing unserviceable sub main wiring.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed FRLSHcable with 2.5 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 2.5 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as directed. Note1: Chasin, cementing and pvc conduit measured and paid seperately.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed FRLSH cable with 1.5 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 1.5 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as directed. Note1: Chasin, cementing and pvc conduit measured and paid seperately.

Supply and fix in replacement of old unsv building light ,45 W IP 66 LED security light for building luminaire comprising of die cast aluminium housing with weather proof gasket for lamp & driver compartment with system wattage of 45 W . The LED make must be of minimum 100 lumen/watt CCT 6500K .The driver must be power factor > 0.95 with short circuit protection , open circuit protection , reverse polarity protection , high voltage protection. the luminaire must have secondary optics with perfectly matched lens for better light control with GI bracket of suitable size and clamps with fixing accessories connection with PVC insulated three core flexible copper conductor cable 0.75X3 Sqmm with proper clamps .complete all as specified and directed.

Supply and fix incl taking down new generation energy saving 9/10 watt LED bulk head (porch light fitting) made of plasitic housing with opal diffuser With IP 65. having correleted color temperature(CCR) of Emmiting light 6500/3000 K with CRI of LED >90. connection with PVC insulated twin core flexible copper conductor cable of suitable size.complete all as specified and directed.

Supply and fixing in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified and as directed by Engineer-in-charge.

S&F modular white/grey cover plate with frame, 1 module/2 module complete all as specified and directed.

S&F modular white/grey cover plate with frame, 3/4module complete all as specified and directed.

S&F modular white/grey cover plate with frame, 6 module complete all as specified and directed.

S&F modular white/grey cover plate with frame, 8 module complete all as specified and directed.

S&F Metal Flush boxes 1/2 module complete all as specified and directed.

S&F Metal Flush boxes 3/4 module complete all as specified and directed.

S&F Metal Flush boxes 6 module complete all as specified and directed.

S&F Metal Flush boxes 8 module complete all as specified and directed.

M&L modular switch 1 way 6 A, 1 module complete all as specified and directed.

M&L modular socket, 6A-2/3 pin combined, 2 module complete all as specified and directed. Make :(as per existing fitment)

M&L modular switch 16 Amps, 1 module with indicator complete all as specified and directed.Make :(as per existing fitment)

M&L modular socket 16 Amps, 6 pin, 2 module complete all as specified and directed. Make :(as per existing fitment)

S&F modular fan step regulator, 120W - 1 module 6 steps complete all as specified and directed. Make :(as per existing fitment)

M&L for PVC conduit 20 mm medium garde (ISI marked) in replacement of old damaged PVC conduit for protection of sunmain wiring fixed to walls or in chasing, wall crossing with all necessary fittings and fixed with clamps and fixtures etc complete all as specified and directed.

M&L for cutting chases for concealed conduit wiring, pinning in making good to facings where required and pointig in cement mortar1:3 to ends or edges of landings, and making good, cutting not exc 10 cm girth.all as specified and directed.

Supply and fix batten holder including flexible wire complete all as specified and directed.

S & F LED lamp invertor technology 9 watt with 4 hour power back up with efficiency more than 100 lumen per watt, Lithium ion battery including removing of unserviceable lamp complete all as specified and directed by Engr-in-charge.

S/Fix in replacement of old MCB DB TPN 4 Way with 200Amp standerd bus bar factory made IP 43 protection class metal double door with Shrouded Neutral Bar & Pan assembly with connecting link complete including Provision for fixing one MCB TPN upto 125A complete all as specified and directed. (MCB TPN will be measured and paid separately under respective items of sch A)

S&F MCB TPN 240 volts 63 to 100 Amp capacity fixing in DB’s including proper thimble connections complete all as specified and directed. (Note: TPN should be B or C curve as directed by engineer in charge)

Sub main wiring with 02 single core 10.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through pvc concealed conduit of suitable dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note1:- 2 Runs of 10.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqmm Copper conductor Earth wire shall be measured as one unit) Note2 : Rate quoted for this item shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of suitable size dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in and making good to facing where required pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth. (iii) Taking down/out existing unserviceable sub main wiring.

Sub main wiring with 04 (Four) single core 10.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through pvc concealed conduit of suitable dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note1:- 4 Runs of 10.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqmm Copper conductor Earth wire shall be measured as one unit) Note2 : Rate quoted for this item shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of suitable size dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in and making good to facing where required pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth. (iii) Taking down/out existing unserviceable sub main wiring.

supply and fixing exhaust fan 300 mm metalic body with LOUVER iron shutter of suitable size,single phase ac 220Vcompelete all as specified and as directed.

Supply and fix Exhaust fan AC single phase 230/240 v of size 450 mm sweep heavy duty 1400 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louver complete all as specified and directed by Engineer-in-Charge.

S&F incl taking down 20 watt wall mounted, new generation alluminium BATTEN SUITABLE FOR LED T-8 Retro fit for multipuspose application with 20 Watt LED Rod 4 feet > 90 lumen/watt , made from extruded aluminium housing,polycarbonate diffuser having correleted color temperature(CCT) of Emitting light 6500/3000 with CRI of LED >90. including all fixing accessories & connecting up with PVC insulated twin core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F incl taking down 18 Watt LED tube Rod 4 feet T-8 Retro fit >90 lumen/watt made from polycarbonate diffuser and polycarboneted body having correleted color temperature(CCT) of Emitting light 6500/3000 K with CRI of LED >90. complete all as specified and directed.

Supply and fix incl taking down Led Stellar Square/round SURFACE Mounted Asthetically designed energy saving LED LIGHT for indoor application of capacity 10 watt having correleted color temperature(CCR) of Emitting light 6500 OR 3000 K(According to requirement) with CRI of LED >90.complete with all electrical connection with PVC insulated twin core flexible copper conductor cable 0.75X2 Sqmm with proper clamps.complete all as specified and directed.

Supply and fix incl taking down outdoor decorative LED Post top lantern with spun aluminium die cast Housing cum heat sink PMMA diffuser in IP65 fitted LED lightf of capacity 40 watt. complete all as specified and directed. Make: Havells and CAT Part No CORALNXTPT40WLED730PSYMTOPC OR EQUIVALENT in crompton/bajaj

Supply and fix incl taking down LED garden light fitting with LED bulb upto 20 watt E27/B22 base cap fitted on the piller with the help of GI pipe/PCC up to 550 mm height nut bolts and in stainless steel housing with clear acrylic cover in top section with IP 65 protection class ,connection with 1.5 sqmm 3 core copper cable upto 1.5 RM including making suitable PCC foundation and all electrical connection complete all as directed.

Supply and fix LED active power factor correction (APFC) electronic gear (electronic driver) suitable for 25 watt LED light fitting O/P current upto .6A output voltage 23-36V power factor >.90 complete all as directed.

S&F Alluminium conductor service cable 2 core 6 sqmm with PVC insulated.fixed with clamps complete all as specified and directed.

Supply and fixing PVC Casing caping of size 40 mm including connected accessories.

Supply & fixing PVC gangbox 15 amp 2 switch and 2 socket 15 amp all as specified

Supply & fixing PVC gangbox 5 amp 2 switch and 2 socket 5 amp all as specified.

Supply & fixing PVC gangbox 5 amp 2 switch and 1 socket 5 amp all as specified.

Supply and fix in replacement of Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 10/12W 6500K of capacity ,watt,2 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge.

Jawandha Enterprises (BID ID -3493517)

ANIL KUMAR AND CO (BID ID -3498389)

Arneja Builders (BID ID -3491255)