Construction of 33-11 KV Sub-station Rohta and associated 33-11 KV Lines in Dist. Agra

Amount

SUB-STATION PART:- 33 KV Line Isolator.

33 KV Bus Isolator.

33 KV Lightening Arrestors

33/11 KV Transformer 5 MVA

33 KV VCB 800A, 750MVA with Steel structure

Control panel I/C for 33 KV single T/F

Control panel I/C for 33 KV double T/F

33 KV CT 400/200/1-1A

33 KV CT 200/100/1-1A

33 KV 1 Ph PT 33 KV/110 V

11 KV SWITCH GEARS VCB:- (i) Incoming VCB 600/300/5A, 350MVA, I /C

(ii) Outgoing VCB 200/100/5A, 350MVA

(iii) Bus coupler 350 MVA

11KV 3 Core XLPE Cable:- (i) 3 × 300 Sq.mm

(ii) 3 × 185 Sq.mm

11KV Cable jointing kit. Heat Shrinkable:- (i) 300 Sq.mm Indoor

(ii) 300 Sq.mm Outdoor

(iii) 185 Sq.mm. Indoor

(iv) 185 Sq.mm. Outdoor

11/0.4 KV, 63 KVA Transformer.

PCC Pole 8.5 mtr. Long for Switch yard Lightening

33 KV Terminal Gantry with Plinth & Foundation as per RESSPO Schedule

Main Bus Bar complete with Structure. Plinth & Foundation as per RESSPO Schedule

Structure for Line & Bus Isolator. with Plinth & Foundation

33 KV Post Insulator

Structure for Post Insulator with Plinth & Foundation

Structure for Lightening Arrestors with Plinth & Foundation

90 Lbs. Rail pieces for T/F

CT Steel structure with Plinth & Foundation

Structure for P T with Plinth & Foundation

33 KV Fuse Set

Structure for fuse Set with Plinth & Foundation

24 V Battery with Battery Charger and Cabinet.

1.98 Mvar Capicitor Banks at 33/11 KV, 5 MVA Transformers with control pannel VCB complete As per Scheudle [ Instaltion of 1.98 Mvar Capicitor Banks for 33/11 KV, 5 MVA Transformers with control pannel VCB-1 Set, with 11 KV 400 Amp. , off isolator with earth switch and mounting structure-1 Nos, (Control cable, lugs/thimble , Junction Box- 1 Set.),(11 KV 3 Core Al XLPE Insulated 3x185 mm.sq. Cable- 25 Mtr.),( 11 KV Cable 3x185 sq.mm.J/K Indoor - 2 Nos ,J/K Outdoor - 2 Nos),( 11 KV VCB Switchgear for Capacitor Bank with complete arangement for connection with existing 11 KV bus bar-1 Nos.),(Casting of civil foundations- 1 Job.),(Cable trench for laying of power /control cables- 10 Rmt.),(Earthing for panel, Isolator and L.A's by Chemical pipe earthing - 3 Nos.),(G.I. Strip of size-25 x 3 mm for Connection of Earthing with equipment - 15 Rmt.),]

Control Cable 4 × 2.5 Sq.mm.

Control Cable 2 × 2.5 Sq.mm.

L.T. Cable Al. 3.5 × 70 Sq.mm .

Earthing of Sub-Station:-(As per RESSPO Schedule) (i) Outdoor Equipment (Earth Mat)

(ii) Indoor Equipment (Earth Mat)

Water level Pipe Earthing for Power T/F

Chemical Pipe Earthing

Alluminium Paint for painting of Sub-Station Structure & equipment.

Red Oxide Paint for painting of Sub-Station Structure & equipment.

33 KV Disc Insulators B&S Type 7000 Kg. for Main BusBar

Disc Fittings for Dog/Raccoon 7000 Kg. for Main BusBar

CONDUCTOR A.C.S.R. Dog conductor for switch yard

33 KV Disc Insulators B&S Type 7000 Kg.

Disc Fittings for Dog/Raccoon 7000 Kg.

33 KV Pin Insulator

33 KV Pin with nut

Plinth and Foundation of 5 MVA T/F with Transformer Cable Stand made by G.I. 65x65x6 mm 3.00 Mtr. Long angle with use of flat 50x6 mm piecees and 100x50x6 mm L-shape channel for Power Transformer nutral earthing

Plinth & Foundation of 33 KV VCB

11 KV Cable laying Including cost of sand and Bricks

Furniture for control room (Office Chair-2 no ,Office Table -2 No. Sitting branch-1 no. (made of steel) Stool -2 no.(made of steel) Office rack-1 no (made of steel) Fire Fighting equipment with stand complete. Fire extinguisher CO2 type 5.0 Kg no-1 ,Fire extinguisher CO2 type 4.5 Kg. no-1, I.S.I. mark. ,Fire Bucket stand size 1500x1200mm.-no-1, Fire bucket made of B.P. sheet 20 gage ( conical shape ) having capacity 10 Ltr.- 10” dia -4 no., Chakkered rubbur sheet 2000x1000x10 mm. I.S.I. mark.-no-4 Boards OF S/S making and fixing of protection Board alongwith all accessories complete made of sunmica 10 mm sheet size 45×60 Cm.-no-2 ,Supply and fixing of sub-station name board made of M.S. Angle 50×50×6 mm and S.P. Sheet of 18 SWG including painting and writing.-no-1

SWITCH YARD LIGHTING ARRANGMENT stone Pade -6 No Cu. PVC Cable 2x4 SQMM -200 Mtr PVC Conduct Pipe -15 mm- 150 Mtr D.P.Switch 63 A for one way control-01 No. Rest for DI Board, D.P. Switch 32A-1, D.P. Switch 16 A-1, Kit Kets-6 including wiring.-1 Job LED Light 100 W -6 No.(ISI Mark)

33 KV LINE PART:- 11 Mtr. long S.T. Pole

13 Mtr. long S.T. Pole

‘V’ Type Cross Arm for 33 KV

33 KV XLPE Cable 3 x 300 Sq mm

33 KV Heat Shrinkable cable boxes for 33 KV Cable XLPE 3 x 300 Sq mm

33 KV Pin Insulator

33 KV Pin with nut

Earthing complete

Disc Insulators B&S Type 7000 Kg.

Disc Fittings for Dog/Raccoon 7000 Kg.

Errection of Stay Set Complete (G.I STAY ROD , 20X1800 MM ,STAY WIRE 7/8 SWG, STAY CLAMP,BOLT NUT & WARSHER)

Grouting of stay rods 1800 x 20 mm. including all works of excavation, fixing, tightening & nozzling of stay with the poles and of required tension as per relevant drawing including back filling of earth and proper ramming.

A.C.S.R. DOG CONDUCTOR

Stone Pad

‘F’ Bracket for 33 KV

Cross Arm Holding Clamp with Packing piece Nut & Bolts for S.T. Pole

Barbed wire

The Grouting and making of plinth of the support (1/6 of the full length of the supports) will be done as per norms in the CC 1:4:8 with cement, course sand and brick ballast including back filling and proper ramming.fixing of all clamps and other accessories as per relevant drawing. i) 11 Mtr. Long SP-55 poles

ii) 13 Mtr. Long SP-72 poles

Alluminium Binding wire 6 SWG

Number Plate with Clamp.

Danger Board with clamp

M.S. Bolts, Nuts & Washers

Armor Rod with Ferrules

Aluminum Paint

Red Oxide

Earth wire clamp with nut & bolt

Cross Arm Holding Angel with Clamp with Nut & Bolts for S.T. Pole 65x65x6 mm 1600 mm

Top Channel 125x65x3200 mm. with Clamps

M.S. Angle 65 x 65 x 6 x 4300 mm. x 2 Nos. Bracing with 4 Nos.Clamps.

P.G. Clamp for Dog Conductor

‘E’ Bracket for 33 KV

Droper Channel 100 x 50 x 3000 mm.with .Clamps. ( for Cable supporting )

M.S. Angle 65x65x6x3010 mm.x 2 Nos. = 6.020 Mtr. @ 5.8 Kg./M = 34.916 Kg.

M.S. Angle holding clamp with nuts and bolts

Eye Bolts

G.I. wire 6 SWG

G.I. wire 8 SWG

Binding wire

Turn Buckle

Connecting Clamps

G.I. M + 6 TOWER 19.300 Mtr. Long

HDPE Pipe 160 mm O/D PN-6, PE-100 Grade UV Stabalized for laying at Double Pole Structure to proposed Double Pole Structure

HDPE Pipe 160 mm O/D PN-6, PE-100 Grade UV Stabalized for Double Pole Structure

Clamps for fixing of Cable and Cable Box

Clamps for holding of HDPE Pipe 160 mm O/D PN-6, PE-100 Grade UV Stabalized

Cable Marker

Wooden Bushes

33 KV Cable Under Ground Work :- Digging of Trench by excavation of earth laying of brick to cover the cable and filling of sand & earth ramming and dressing properly with complete job for laying 33 KV XLPE cables in loop of sizes 3x300 Sq.mm. including cost of bricks, sand, clamps etc.

Laying of H.D.P.E. Pipe underground minimum 2.5 Meters below by HDD Method along with laying of 33 KV 3x300 Sq. mm. XLPE Cable in H.D.P.E. Pipe

Laying of 33 KV, 3x300 sq.mm. XLPE Cable underground in trunches.

Laying of 33 KV, 3x300 XLPE Cable in H.D.P.E.. Pipe on Double Pole Structure

Laying of 33 KV, 3x300 XLPE Cable in Air on Double Pole Structure & filling of cable joint kit with proper dressing.

Erection of 3.00 Mtr. long H.D.P.E. pipe 160-mm dia on double Structure

Choping of branches of Tree

Road restoration charges for pucca road crossing

Road restoration charges for Kachhcha / footpath side

11 KV LINE PART:- 8.5 Mtr. long P.C.C. Pole.

11 Mtr. long S.T.P., SP-70 Pole.

13 Mtr. long S.T.P., SP-70 Pole.

‘V’ Type Cross Arm for 11 KV

11 KV XLPE Cable 3 x 185 Sq mm

11 KV Heat Shrinkable cable boxes for 11 KV Cable XLPE 3 x 185 Sq mm (2 x 1) x 2 Nos. = 4 Nos.

11 KV Pin Insulator

11 KV Pin with N&B

Earthing complete

11 KV Disc Insulators T&C Type 4500 Kg.

11 KV Disc fittings T&C Type 4500 Kg.

Stay set Complete for 11 KV line

Grouting of stay rods 1800 x 20 mm. including all works of excavation, fixing, tightening & nozzling of stay with the poles and of required tension as per relevant drawing including back filling of earth and proper ramming.

A.C.S.R. DOG CONDUCTOR

Stay set complete for Sub-Station D/P

11 KV Lightning Arrestor

Earthing Complete for Sub-Station D/P

Stone Pad 300x300x75 mm

Cross Arm Holding Clamp with packing piece, Nut & Bolts for PCC Pole

‘F’ Bracket with Nut & Bolts

Barbed wire

The Grouting and making of plinth of the support (1/6 of the full length of the supports) will be done as per norms in the CC 1:4:8 with cement, course sand and brick ballast including back filling and proper ramming.fixing of all clamps and other accessories as per relevant drawing. ii) 8.5 Mtr. Long PCC Poles

ii) 11 Mtr. Long SP-55 poles

iii) 13 Mtr. Long SP-72 poles

Alluminium Binding wire ( 5 mm dia )

Painting number mark with Paint

11 KV Danger Board with clamp & bolts

Alluminium Paint

Red Oxide

M.S. Angle 65x65x6x2700 mm Bracing Set with 4 Nos.Clamps.

Top Channel 100x50x2240 mm.

Clamps for Top Channel with Nut & Bolts

P.G. Clamp for Weasel Conductor

‘E’ Bracket for 11 KV with Nut & Bolts

T' OFF M.S. Channel 100 x 50 x 1300 mm. ( 1.3 m @ 9.56 M / Kg. = 12.428 Kg. )

T' OFF Channel Holding Clamp with Nut & Bolts for PCC Pole

M.S. Angle 65x65x6x3010 mm.x 2 Nos. = 6.020 Mtr. @ 5.8 Kg./M = 34.916 Kg.

M.S. Angle holding clamp with nuts and bolts

Eye Bolts

G.I. wire 6 SWG

G.I. wire 8 SWG

Binding wire

Turn Buckle

Connecting Clamps

Dropper Channel 100×50×2028 mm for Fuse Set

M.S. Angle 65x65x6 mm,2028 mm. long for G.I. Pipe supporting @ 5.8 Kg/M

G.I. Pipe 160 mm Dia. For Sub-Station D/P

11KV TPMO Set. with fixing clamp complete

11 KV Fuse Set with Fixing clamp complete

MS Top Channel (125x65x2240 mm.)

Copper L-Piece of size 400x50x6 mm for LT bushing Rod of transformer

LT Aluminium insulated Cable of size 1x16 Sq.mm. (for HT jumpering)

Barbed wire for Sub-Station D/P

Al. crimping lugs:- Al. crimping lugs 35 sq.mm.

Al. crimping lugs 50 sq mm.

Al. crimping lugs 70 sq.mm.

SMC MCCB Distribution board (1 No. I/C & 3 No. O/G)

HDPE Pipe 160 mm O/D PN-6, PE-100 Grade UV Stabalized for laying at Double Pole Structure to proposed Double Pole Structure

Cable Marker

Wooden Bushes

H.D.P.E.Pipe 160 mm Dia for Double Pole Structure

Clamps for Fixing Cable & Cable Box

Clamps for holding of H.D.P.E Pipe 160 mm

11 KV Cable Under Ground Work :- Digging of Trench by excavation of earth laying of brick to cover the cable and filling of sand & earth ramming and dressing properly with complete job for laying 11 KV XLPE cables in loop of sizes 3x185 Sq.mm. including cost of bricks, sand, clamps etc.

Digging of Trench by excavation of earth laying of HDPE pipe for 11KV 3X185 sqmm XLPE cable

Laying of H.D.P.E. Pipe underground minimum 2.5 Meters below by HDD Method along with laying of 11 KV 3x185 Sq. mm. XLPE Cable in H.D.P.E. Pipe

Laying of H.D.P.E. Pipe underground minimum 1.5 Meters below by open trench method anong with laying of 11 KV, 3x185 Sq. mm. XLPE Cable in H.D.P.E. Pipe

Laying of 11 KV, 3x185 sq.mm. XLPE Cable underground in trunches including cost of bricks, & sand,.

Laying of 11 KV 3x185 XLPE Cable with H.D.P.E. Pipe on Double Pole Structure

Laying of 11 KV 3x185 XLPE Cable in Air on Double Pole Structure & filling of cable joint kit with proper dressing.

Choping of branches of Tree

Road restoration charges for pucca road crossing

Road restoration charges for Kachhcha / footpath side

Carriage of following material from Center Store to Site: (SUB-STATION PART) 33 KV Line Isolator.

33 KV Bus Isolator.

33 KV Lightening Arrestors

33/11 KV Transformer 5 MVA

33 KV VCB 800A, 750MVA with Steel structure

Control panel I/C for 33 KV single T/F

Control panel I/C for 33 KV double T/F

33 KV CT 400/200/1-1A

33 KV CT 200/100/1-1A

33 KV 1 Ph PT 33 KV/110 V

11 KV SWITCH GEARS VCB:- (i) Incoming VCB 600/300/5A, 350MVA, I /C

(ii) Outgoing VCB 200/100/5A, 350MVA

(iii) Bus coupler 350 MVA

11KV 3 Core XLPE Cable:- (i) 3 × 300 Sq.mm

(ii) 3 × 185 Sq.mm

11KV Cable jointing kit. Heat Shrinkable:- (i) 300 Sq.mm Indoor

(ii) 300 Sq.mm Outdoor

(iii) 185 Sq.mm. Indoor

(iv) 185 Sq.mm. Outdoor

11/0.4 KV, 63 KVA Transformer.

PCC Pole 8.5 mtr. Long for Switch yard Lightening

Carriage of following material from Center Store to Site (33 KV LINE PART) 11 Mtr. long S.T. Pole

13 Mtr. long S.T. Pole

‘V’ Type Cross Arm for 33 KV

33 KV XLPE Cable 3 x 300 Sq mm

33 KV Heat Shrinkable cable boxes for 33 KV Cable XLPE 3 x 300 Sq mm

Carriage of following material from Center Store to Site (11 KV LINE PART) 8.5 Mtr. long P.C.C. Pole.

11 Mtr. long S.T.P., SP-70 Pole.

13 Mtr. long S.T.P., SP-70 Pole.

‘V’ Type Cross Arm for 11 KV

11 KV XLPE Cable 3 x 185 Sq mm

11 KV Heat Shrinkable cable boxes for 11 KV Cable XLPE 3 x 185 Sq mm (2 x 1) x 2 Nos. = 4 Nos.

ALOK ENTERPRISES

shiva engineering AND suppliers