PROVISION OF TILING AT CERTAIN OFFRS MD ACCN AT NOFRA

Amount

Taking down cement or cement lime plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc including errection of double steel scaffolding, covering with green cloth and all the safety masures/ precautions and remove the debries outside MD land (as per directions of BMC) complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster in CM 1:6 on fair faces of brick work/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for Rendering 10mm thick on fair faces of ceilings in CM 1:3 finished even & smooth without using extra cement, complete all as specified.

M&L for preparation of new plastered surface of wall and applying 2 coats of oil emuslion distemper over a coat primer on 1 to 2 mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying two coats of oil bound distemper over a coat of primer on 1-2mm thick wall care putty, complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying 2 coats of oil emuslion distemper complete all as specified and directed.

M&L for preparation of old plastered surface of ceiling and applying two coats of oil bound distemper, complete all as specified and directed.

M&L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc, conforming to Fe.290.Gde-E-165.

S&F in repair 75mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) including complete all as specified and as directed.

M&L for coloured non-skid ceramic tiles 7-8mm thick rectified glossy (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM (1:4), complete all as specified and directed.

M&L for coloured glazed ceramic tiles as in vertical surface, of size exc 0.06 Sqm and not exc 0.16 Sqm 7-8mm thick as in dado/skirting or on vertical surface, over and including 10mm thick backing coat in CM 1:4,set and jointed in neat cement slurry and pointed in white or colour cement match to existing existing tiles or plaster over walls surfaces complete all as specified and directed.

M&L for coloured light shade Digitial Glazed vitrified tiles of size 600 x 600 mm, 7 to 8mm thick, laid in flooring, with & including 5mm thick adhesive of approved make including necessary roughning of existing PCC flooring & levelling the floor if required, grouting the joints complete all as specified and as directed by Engr-in-charge.

M&L for coloured light shade Digitial Glazed vitrified tiles 7 to 8mm thick, superior quality, 100mm high skirting, over & including a backing coat of 10mm thick in CM 1:3, complete and making nosing at right angle corner, including levelling the wall, complete all as specified and as directed. (Note : Skirting shall be flushed with the walls)

Dismantling stone slabs and tiles of any description or thickness in floors laid or on riser and treads bedded and pointed in any mortar complete all as specified and directed.

M&L for Machine cut cuddapa stone slabs 20-25mm thick fixed with cement mortar 1:3 screed base laid and jointed with grey cement slurry as in verticle/ horizontal supports for cooking platform, complete all as specified and as directed by Engr-in-Charge.

M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills, cooking platforms, working table and like over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding and rounding all as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed bed in CM (1:6) 15mm thick, & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for powder coated (25 Micron minimum thickness) aluminum frame for door, windows,ventilators etc.with one or more rebates including joining cleat for fixing etc.fixed type/louvered window or ventilator without sash bar,aluminum including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, sliding rollers, Rubber gasket etc compleate all as specified and directed. (Note: (a) Glazing shall be measured seperately. (b) Item shall be paid as per weight of aluminium section. (c) The rate quoted shall be inclusive of neoprene beading,glazing clips,screws, etc, as required which shall not be measured for arriving the weight. (d)the rate shall be inclusive of the locking arrengement including complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.)

Supply and fix 4.80 mm thick plain glass n exc 0.5 Sqm in each pane fixed to aluminium windows and iron frame.

Supply and fix 4.80mm thick plain glass exc 0.5 Sqm in each pane fixed to aluminium windows and iron frame.

S&F 20mm dia stainless steel curtain rod or similar articles complete all as specified and as directed by Engineer in Charge

S&F alumunium powder coated brackets suitable for hanging 20mm dia rods in Wardrobs and fixed on stone/ walls with screws, all as specified and directed.

S&F aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by approved make as per design No DG- 104, 7.5 mm thick all as specified and as directed by Engr- in- charge.

M&L preparation of old wooden surface and applying one coat of synthetic enamel paint in any description, over 10 cm in width or girth, not otherwise described.

M&L preparation of old Steel surface and applying two coats of synthetic enamel paint in any discription, over 10 cm in width or girth, not otherwise described, specified and directed.

S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) with PVC white seat cover with mild steel chromium plated or aluminised hinging device including flushing cistern connection to drowm pipe PVC connection and flushing pipe all as specified.

S&F in repairs Vitreous China wash basin, white, flat back, size 550 x 400mm including brackets or fixing with bolts in wall , 15mm fancy pillar tap, waste coupling, waste pipe, complete all as specified.

S&F Vitreous water closet (Squatting pan, Orissa pattern, size 580 x 440 white, with integral foot rests and 'P' trap (excludinGround Floorlushing cistern and flush pipe) including provision of lime concrete bedding complete as specified and directed.

S&F 10 ltr capaciaty PVC low level flushing cistern 10 litre capacity with 32mm bore polythene flush pipe of sufficient lenght including internal fitting (valve less syphonic) etc. complete as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F PVC cabinet with openable shutter and mirror with size of 450mm x 350mm with thickness of mirror not less than 2mm, fixed to wall complete all as specified and directed.

S&F aluminium anodised tubular towel rail 20mm dia 600mm long including necessary aluminium brackets complete all as specified and as directed.

Demolition of cement concrete filling of any description in sunken portion and removing debris out side MD land.

S&F in repairs stainless steel plate rack made of size 900X580X210 mm fixed to wall with screws all as specified and directed.

S&F in repair toilet paper holder complete all as specified and directed.

S&F Stainless steel Towel ring 150mm dia of approved make complete all as specified and directed.

S&F decorative corner glass shelf shall be size of 300 X 120 mm and 8mm thick with railing 25mm high having edges rounded off and shall be supported on chromium plated brass brackets fixed with chromium plated brass screw on plugs or gutties fixed in wall.

S&F Telescopic channels, powder coated with ball bearings, suitable for Sliding stainless steel kitchen basket 60cm long standard width; fixed over 2nd class hard wood rectangular fillet sectional area exc 3 & n exc 6 Sqcm, clean swan secured with screws and the fillet fixed on cuddapah stone with screws, all as specified and as directed.

S&F Solid PVC door frame of size 100 x 45mm made out of 5mm wood grain printed PVC sheet reinforced with MS square/rectangular tube fixing in existing opening including & edges will be painted to match with prelam sheet necessary hold fast and concrete all as specified and directed

M&L for factory made moulded door shutter 35mm thick, consisting of solid core single leaf flush door of 30mm thick, lipped with 15mm (5mm x3) thick x 30mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30mm width on the other stiles & bottom rails. The inner panel laminated with 2mm thick PVC sheet of density 600 Kg/Cum Manufactured by an ISO 9001-2015 certified company . Termite proof, water proof and fire resistant moulded PVC sheet with 2, 4, 6 raised panel design in different plain and or prelam PVC sheet on other side after routing the moulding design on flush door & 2mm plain and or prelam PVC sheet on other side using rubber based adhisive on the PVC lipping etc incl hinges SS(each door-03 nos), tower bolt(each door 02 nos), handel (each door 02 nos). complete as per direction of Engr-in-Charge incl supplying and fixing in frame at site as per specication and apporved by GE etc complated all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing at same location, complete all as specified.

S&F 20mm bore steel water tubes, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing at same location, complete all as specified.

S&F 15mm bore steel water tubes, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

M&L for Cutting holes into or through brickwalls built in cement mortar n.exc 150 Sqcm superficial area & making good after pipes lines are laid by using PCC(1:2:4) , complete all as specified.

Supply and fix in repair white rectangular PVC water storage tanks (Loft tank) of capacity 275Ltrs with complete fitting including fixing 03 Nos tank nipples of GI/ PPR with washer for out let and inlet all as per manufacturers instructions including disconnecting service connections/over flow pipes and removing old tank complete all as specified and directed.

Supply and fix in repair PVC profile suitable for PVC Loft tank of capacity 275Ltrs including fixing of necessary aluminium channel around the profile complete all as specified and directed.

Supplying and fix in repairs brass float valve flat type of size 15 mm bore, high pressure with polythene float & fly nut complete, screwed for GI pipe of following sizes including necessary GI fittings complete all as specified.

S&F in repairs 15mm fancy type chromoum plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125mm size, including fixed to steel tube, complete all as specified and directed.

S&F in repairs stop valve /angle valve fancy type chromium plated screwed down, high presure with butterfly handle screwed both ends for pipe and fixed to pipe of 15mm dia bore complete all as specified and as directed.

Supply and fix Hand Shower (Health Faucet) with 1 Meter Long flex tube in chrome finish including holder complete all as specified and directed.

Supply and fix chromium plated brass Bib cock two way suitable for 15mm bore GI tubing and health faucet complete all as specified.

Supply and fix fancy type chromium plated brass Bib tap with nozzle for washing machine suitable for 15mm bore GI tubing with necessary fittings complete all as specified.

Supply and fix in repairs pressure reducing valve gun metal 20 mm dia (ISI marked) heavy duty screwed down for iron pipe PRVs of sizes up to 16 storey buildings with necessary scaffolding or props as required.

Supply and fix fancy type chromium plated brass mixer unit 3 in 1 with wall flange suitable for 15mm bore GI/ PPR tubing with necessary fittings complete all as specified.

I.J Enterprises (BID ID -3487817)

Anil Industrial Corporation (BID ID -3485420)

ASHOK CONSTRUCTION (BID ID -3487651)

KEWAL SONS (BID ID -3486714)

JANKI ENTERPRISES (BID ID -3487339)

SR Construction (BID ID -3487795)

SATGURU ENTERPRISE (BID ID -3487718)