Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹9.7 L
EMD Value
₹19,353
Closing Date
16 Aug 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Electrical work for Renovation of FCG-LAB ASERDC
8830
HAL-ADL/9995/FCG-LAB/2024/208
Works
Accessories Complex - Lucknow Divn - Plant Maintenance
₹0
₹19,353
16 Aug 2024
26 Jul 2024
26 Jul 2024
16 Aug 2024
HINDUSTAN AERONAUTICS LIMITED ACCESSORIES DIVISION, LUCKNOW PQ FORM/ELIGIBILITY CRITERION-MATRIX
NAME OF THE WORK: "Electrical work for Renovation of FCG-LAB ASERDC"
Estimated Cost (in Rs.) 967,605.00
S# Intending bidders must meet the following eligibility criterion: Remarks to be filled by Bidder
1 Name of the Individual / Firm / Company: * Mandatory
2 Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
4 Address of Correspondence
5 Contact Details: Contact person name: Designation: Mobile No:. Ph. No. with STD code: Email Id :
6 Contractor must give his acceptance to provide services as per ‘Requirement, Scope of work, Drawings’ and ‘Terms & Conditions' contained in Technical Bid.
7 Self attested copy of PAN/GIR No. Registration certificate issued by income tax authority.
8 Sel attested Copy of GST Registration Certificate.
9* Average annual turnover during the last 3 years, ending 31st March of previous financial year, should be at least 30% of the approximate estimated amount put to tender. Profit & loss statement duly certified by chartered accountant with UDIN shall be considered for evaluation of turnover for the respective financial Year i.e. Fin Year 2020-21,2021-22 & 2022-23 290,282.00
10* Valid “A” class Electrical contractor licence of appropriate voltage issued by any state Govt. Under clause 45 of Indian Electricity Rules 1956 or as amended from time to time.
11* The Solvency required will be 40% of the approx. estimated amount put to tender. The solvency certificate shall be from a nationalized or scheduled bank and issued within a period of 12 months from the final date of Submission of tender.(in Rs.) 387,042.00
12* EMD amount (in Rs.) 19,353.00
13* Self attested Copy of PF Code Certificate(if applicable).
14* Self attested Copy of ESI Number certificate (if applicable).
15* Experience of having successfully completed similar works as indicated in the work details during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following (in Rs.):-
i Three similar completed each work costing not less than 40% of estimated amount. OR 387,042.00 PO no.: Value : Completion Date: Customer:
387,042.00 PO no.: Value : Completion Date: Customer:
387,042.00 PO no.: Value : Completion Date: Customer:
ii Two similar completed work costing not less than the amount equal to 50% of the estimated cost. OR 483,803.00 PO no.: Value : Completion Date: Customer:
483,803.00 PO no.: Value : Completion Date: Customer:
iii One similar completed work costing not less than the amount equal to 80% of the estimated cost. 774,084.00 PO no.: Value : Completion Date: Customer:
16 DECLARATION I ACCEPTED/NOT ACCEPTED
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.
17 DECLARATION II ACCEPTED/NOT ACCEPTED
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. 5.I/We are not debarred / blacklisted from any Govt agencies, if debars for specified period reason for debar and copy of resumption of same shall be provided. 6. I/We have not concealed any information which may adversely effect my qualification.
19 DECLARATION III COMPLIED/NOT CPMPLIED
I/We declare and confirm that all the documents related to NIT mentioned at SI.No.2 and 3 have been attached with the technical bid.
Name of Bidder:
* 1. To be filled by Bidder essentially and carefully. Supporting documents must be attached as proof. Clarifications shall be sought w.r.t. information provided with tender documents. 2. Similar works implied that works related to HT/LT Electrical Works in nature. Mere supply of electrical goods does not mean qulification in the tender. 3. Scanned copy of completed work orders and completion certificate issued by respective clients to be attached. If the completion certificate is form private organization the same shall be uploaded with TDS certificate. 4. The work shall be completed as a whole, Partial value/completion will not be considered. 5. The Bidders are requested to attach scan copies of all the relevant / desired / required proofs/ documents on e-portal, failing which tender shall be summarily rejected without assigning any reason to bidders.
Name of Work: “Electrical work for Renovation of FCG-LAB ASERDC”
S# DESCRIPTION OF WORK UNIT TOTAL QTY SUPPLY RATE INSTALLATION RATE AMOUNT
Light/Fan/Exhaust Fan Point wiring
1 Supply & making One Light point/fan point/exhaust fan point/call bell point controlled by one modular type switches, 6 Amps 230 Volts with 1.5 sqmm, P.V.C. insulated, copper FRLS type conductor multi stranded wire of 1100/660 Volts grade in heavy duty P.V.C. pipe with modular switch, modular plate, suitable GI box and earthing the point with 1.5 Sq mm FRLS PVC insulated copper conductor single core etc. including all accessories such as bends, J.B,tees, ceiling rose, batten holder etc. required for point wiring work. The pipe shall be laid concealed in wall; partially it may be flush to the wall as per site requirement. Nos 20
2 Add to the above Item-1 for each addition on only light points on the same switch circuit including all materials required for such wiring work. Nos 30
3 Supply & making One (half point) with 5 pin, 6 Amps modular socket controlled by 6 Amps switch modular type on the same board with other switches with 1.5 sqmm, PVC. insulated,copper FRLS type conductor, multi stranded wire. No. 6
Sub-main/Circuit Wiring
4 Wiring for circuit /submains wiring alonghwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface /recessed heavy duty class PVC conduit as required.
i 2 x 2.5 sqmm (for phase & neutral) + 1 x 2.5 sqmm (for earth) + 1 x 1.5 sqmm (for Inverter) Mtrs 200
ii 2 x 4 sqmm (for phase & neutral) + 1 x 4 sqmm (for earth) Mtrs 200
5 Supply & making One independent domestic power point with 3 pin, 5/6 Amps modular socket controlled by 5/6 Amp modular switch, including 3 module GI box along with modular base and cover plate for modular switches, connections to switches etc as required. Nos 16
6 Supply & making One independent domestic power point with 5 pin, 15/16 Amps modular socket controlled by 15/16 Amp modular switch, including 3 module GI box along with modular base and cover plate for modular switches, connections to switches etc as required. Nos 10
7 Supply & Fixing suitable size GI Box with Modular plate and cover in front on surface or in recess including proving and fixing 25A modular socket and 25A modular SP MCB "C curve including connection, painting etc. as required. Nos 8
8 Supplying and fixing of 25MM of Heavy class PVC conduit for dressing of LAN/WAN/telephone cable along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Make: AKG/CAP/Anchor/MODI) Mtrs 50
9 Supply and installation of three phase, double door MCB DB suitable for incorporating MCB's, 4 way per phase with following incoming and out goings MCB's Incoming- 63 Amps, TPN Isolator,:MCB-01 No., Outgoings: 10-32 Amps S.P. MCB –12 Nos. The D.B. must be installed flush to the wall and wall must make good after fixing. Nos 2
10 Supply and installation of three phase, double door MCB DB suitable for incorporating MCB's, 6 way per phase with following incoming and out goings MCB's Incoming- 63 Amps, TPN Isolator,:MCB-01 No., Outgoings: 10-32 Amps S.P. MCB – 18 Nos. The D.B. must be installed flush to the wall and wall must make good after fixing. Nos 1
11 Supply & Laying of XLPE insulated, PVC sheathed Armored, 1.1 KV grade, Aluminium conductor power cable, conforming to IS 7098 (Part-I). Concealed cabling can be done to cut/chase the wall/floor, laying cable tray (provided by HAL) and after laying of cable wall/floor shall be finished as original & if cable laid on wall then use clamps for fixing the cable. The work also includes connection work which includes all the required materials for their jointing work. Cable to be laid as required at site and as per the direction of Engineer-In-Charge. Size of cable 4 core x 25 sqmm Mtrs 200
End/Straight Trough Joint
12 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Size 4C x 25 Sqmm.Al Arm LT cable. Nos 6
13 Supply and making of UL listed CPRI Tested maintenance free copper bonded earth rod of 3 metre having diameter of 17.2mm with 250 micron copper bonding tested 45 kA peak short-circuit current with clamp made of stainless steel for terminating cable / flat conductor. Earth enhancing mineral backfill compound ( electrical resistivity 0.018 ohm metre ), environmental friendly, 25 kg tested for Leaching & TCLP with NABL accredited lab. The systems is conforming to IS 3043, IS / IEC 62305, IEC 61643-5-54, UL 467, the rod has to be tested to for dimension, marking, tensile strength, salt mist, coating thickness, electrical resistivity test before and after corrosion test etc as per IEC 62561-2.Chamber Inspection Pit made up of PP material can bear 60kN load. Set Consist of following BOM (1) Earth rod of 3 mtr length having the dia of 17.2 mm dia (2) Backfill Compound 12.5 Kg bag x 2 nos (3) Universal SS Clamp Make: Cape/Sabo/Zeff/SPG Power Nos 2
14 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. Mtrs 200
15 Supplying and laying 25 mm X 5 mm Cu strip at 0.50 meter below ground as strip earth electrode, including connection/termination with nut, bolt, spring, washer etc as required.(Jointing shall be done by overlapping and with 2 sets og brass nut bolt & spring washer spaced at 50mm). Mtrs 100
Removal of Old Wiring
16 Removal of old Cables, Wires, Light Fitting, fan and DB, MCB DB and all other accessories required to meet the scope of work at site and at nearby location like passage, Gallery etc after tracing of live and non live wires of electrical, Lan and Telephone thereafter dressing of cable as directed by EIC. Mtrs 100 Not Applicable
Lighting Fixtures
17 Supply and installation of recess mounting LED luminaire of size 600 mm x600 mm 35/36W 220 V AC with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp including connecting up with dirver thre core flexible copper cable. The work also includes connection from ceiling rose to fitting with twin core, white color flat wire of 1100/660 Volts grade. All material required for the work shall be supplied by the contractor. Nos 40
Air-Conditioning
18 Supply, installation, testing and commissioning of 5 star rated inverter type High Wall Split Type Air Conditioner (single phase) for cooling on eco-friendly refrigerant gas with cordless remote, indoor & outdoor units complete,MS Stand for outdoor. Capacity: 1.5 TR Warranty on PCB: 05 Years Warranty on Compressor: 10 Years Make: Carrier/Hitachi/O'General/Blue Star/LG/Videocon Nos 4
Industrial Fan/ Exhaust Fan
19 Hevay Duty Industrial Fans Supply of industrial type air circulator wall mounting fan, metal body, conforming to IS 2997 of 450 mm 230 volts, 50 Hz., of make Almonard/Khaitan/Crompton/Orient with speed control. The work includes assembly of fan & mounting of fan. Work must be done as per direction of Engineer-In-Charge. All material required for the work shall be supplied by the contractor.Warranty card duly filled and stamped by dealer is to be submitted to engineer incharge. Nos 6
20 Supply and Installation of industrial type, Heavy Duty Exhaust Fan with louvers on pre made hole. Ex – Fan Size 400/450mm, sweep, 900 rpm, 230 volts, 50 Hz. Make: Almonard/Orient/Usha/Khaitan/Havells. Nos 2
21 Supply and Installation of Plastic Body, Fresh Air Exhaust Fan with louvers on pre made hole. Ex – Fan Size 200/250 mm, 230 volts, 50 Hz. Make: Orient/Usha/Khaitan/Havells. Nos 2
22 Supply and installation of 900 VA Digital power inverter with 12 volts Exide maintenance free tubular battery with trolley, complete item. Fitted with cooling fan, facility for protection from over current and over loading, short circuiting,. Input voltage: 155 to 290 volts AC, Output voltage: 230 v +/- 3%, 50 Hz. Temp. 0 to 5 Deg.c. Battery voltage 12 VDC, deep discharge, overcharge, charging voltage: 13.7 v, no load current less than 5 A DC (ideal case), 100 AH. The work include the wiring of inverter also. Work is to be done as per the direction of engineer in charge. Complete job. All material required for the work shall be supplied by the contractor. Make- Microtek/Su-kam/Luminous/APC Nos 1
GST @18% on SUB TOTAL
Name of Vendor:
Note: PLEASE REFER CHAPTER 6(B) OF TECHNICAL BID FOR APPROVED MAKES OF ITEMS & EQUIPMENTS FOR THIS WORK .
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT.pdf
TENDER_DOCUMENT • 0.98 MB
ELIGIBILITY_CRITERION.xlsm
TENDER_DOCUMENT • 0.01 MB
PRICE_BID.xlsm
TENDER_DOCUMENT • 0.01 MB
TECHNICAL_BID.pdf
TENDER_DOCUMENT • 0.84 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .