SPECIAL REPAIR TO BLDG NO OD-22 AND OD-24 INCLUDING INTERNAL ELECTRIFICATION ALONGWITH CONNECTED ITEMS UNDER GE (FW) KOLKATA

Amount

SCHEDULE 'A' PART-I (B/R WORKS) Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each and removing from the site complete all as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for all as specified and directed .

Demolition of Cement concrete ( unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins, where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of Fe410W Gdr E-250 quality A, all as specified.

M&L welded steel wire fabric, weight n exc 4 kg per square meter complete , fixed to steel members, all as specified and directed.

S&F steel work in tubular trusses consisting square or rectangular tubes including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including necessary form work complete all as specified and directed.

S&F Mild steel wind ties for roof including securing bolts, posts including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets including all necessary drilling, bolting or rivetting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S & F mild steel work holdfast, cleat etc. for door frame/ wooden batten etc. quality conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S & F pre-painted color galvalume aluminium zinc coating GI based corrugated steel 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S & F pre-painted color galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges , valley gutter etc fixed with self tapping screws as specified.

S&F 0.56 mm thick plain aluminium sheeting alloy 31000 H4 as in ridges, hips, valley gutter, drip and straight flashing etc complete all as specified and as directed.

S & F mild steel in framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc all as specified and directed .

M & L for brick work using old size sub class 'B' bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:6 all as specified and directed .

M & L brick work using old size sub class 'B' bricks straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 all as specified and directed .

M&L for brick work with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 for walls built in cement mortar incl all quoins arches pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and as directed.

M&L for brick work with fly ash brick straight or cuved on plan to any radius in half bricks thick walls, built in 1:4 cement mortar complete all as directed.

M&L rendering 15 mm thick on fair faces of brick work/concrete surfaces in CM 1:4, using water proofing compound as per manufacturer instructions, finished fair & even & smooth without using extra cement. (WPC shall be measured and paid separately).

Supply only liquid water proofing compound all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) to fair faces of brick or concrete wall surfaces finished even & smooth without using extra cement all as specified and directed .

M&L for 10 mm thick rendering in cement mortar (1:3) to fair faces of brick or concrete ceiling surfaces finished even & smooth without using extra cement all as specified and directed .

M&L for preparation of new surfaces of walls and applying two coats of OBD over alkali resistant primer after applying 3 mm thick wall care putty on walls, all as specified and directed.

M&L for preparation of new surfaces of ceilings and applying two coats of OBD over alkali resistant primer after applying 3 mm thick wall care putty on walls, all as specified and directed.

M&L for preparation of new surfaces of walls and soffit of chajja, roof slab etc by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from protrusions, loose particles, dust etc including necessary safety & protective measures such as safety belt, headgear etc, finishing the surface with 1mm thick exterior wall putty for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation oards/slabs/blankets, any thickness, including cover fillets all as specified.

Supply and Fixing PVC solid wall lining including arch shaped ceilings consisting of 5 mm thick plain colour PVC sheet used inclusive of solvent cement and fixing at site on PVC frame as per manufacturer’s specification and instruction) directed .

Supply and Fixing PVC fillets of width 35 mm, made of 5 mm thick PVC sheet, for wall paneling inclusive of fixing as in grid / frame on wall at a distance .6m horizontal & vertical for wall lining/paneling as per specification of manufacturer and as directed.

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as directed.

Supply and fix vitrified tiles(any shade) of 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floor set and jointed in neat cement slurry @ 3 kg per Sqm and pointed in coloured cement to match the shade of the tiles over and incl. 20mm screed bed in CM (1:6) complete all as directed.

Supply and fix vitrified tiles ( any shade) of 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in skirting set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles over and incl. 10mm rendering in CM (1:3) complete all as directed.

Material and labour for 300mm X 450mm X 7mm thick decorative type wall tiles (coloured) joint free as in vertical surfaces of and jointed with neat cement slurry and pointed in white/coloured cement to match the surface laid over and including 10mm thick rendering in CM(1:3) complete all as specified and as directed.

Supply and fix non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 20mm screed bed in 1:6 complete all as directed.

M&L non skid ceramic coloured digital tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles, all as specified and directed.

Supply and fix non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 10 mm rendering in CM 1:3 complete all as directed.

S&F 20 mm thick granite slab cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing over and including 20mm screed bed in CM(1:6) completed all as directed.

S&F 20 mm thick granite slab as in vertical surfaces cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing over and including 10mm rendering in CM(1:3) completed all as directed.

M&L pre polished Chequered cement concrete 22-25mm thick & area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors set , jointed & pointed with neat cement slurry with grey cement and pigment including 15 mm thick screed bed or bedding layer in cement mortar (1:6) over brushing with neat cement slurry with 3.00 Kg of cement per sqm completed all as specified and directed.

S&F 35mm thick precast cement concrete (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) louvers and jallies including all moulding, set in CM 1:4 all as directed .

M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/Paving etc, finished even and smooth without using extra cement as directed.

M&L for application of damp proof painting in two layers as per manufacturers instructions in wall and ceiling surfaces including preparation of surfaces (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. Make : Smart care damp block-2K of Asian paints Dampstop Paint of Berger paints.

M&L for providing Cement concrete 1:4:8 type D2 using 40mm graded Aggregate for foundation and mass concrete as directed.

M&L for providing Cement concrete 1:2:4 type B1 using 20mm graded Aggregate in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed.

M&L for preparing new plastered surface of walls and applying two coats of cement based paint over a coat of Chalk whiting primer painting including preparation complete all as specified and directed.

Extra for forming fair finished channel or drain 30cm inner girth or part therein in cement concrete using extra cement including mitred/stopped ends, forms mould etc, complete all as specified and directed.

Extra for forming fair finished channel or drain 60cm inner girth or part therein in cement concrete using extra cement including mitred/stopped ends, forms mould etc, complete all as specified and directed.

S&F in repair RCPC (Reinforced Cement Polimer Concrete) grating slab of size 1200 mm x 450 mm x 75 mm thick, of capacity 5 MT fixed in proper position complete as directed .

S&F in repair RCPC (Reinforced Cement Polimer Concrete) grating slab of size 900 mm x 450 mm x 75 mm thick, of capacity 5 MT fixed in proper position complete as directed .

S&F in repair RCPC (Reinforced Cement Polimer Concrete) grating slab of size 600 mm x 450 mm x 75 mm thick, of capacity 3 MT fixed in proper position complete as directed .

Supply and laying in position 600mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars as specified and directed.

M&L Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint including taking down / dismantling the old one complete all as specified and as directed.

S&F TMT Mild Steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 54 but 8 mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L for RCC 1:2:4 (using 20 mm graded stone aggregate ) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as directed .

M&L Use and waste of timbering as planking and strutting for excavations in trenches in soil, n. Exc 1.5 m deep including wales, struts, open poling boards, etc. as may be necessary and fixing and removal complete all as specified and as directed.

Material & labour for 60mm thick machine pressed non skid pre polished coloured interlocking paver block made with electro vibro technology with rubber/ PVC moulded of not less than compressive strength 30 Kg/Cm and shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment over 25mm thick dry sand cushioning including with dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed by Engineer in Charge. The Interlocking Paver blocks shall be procured directly from one of the Manufacturers specified. Note:-Note:-Sand cushioning will be measured separately

Sand filling under floors or in foundations including watering and consolidation all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. all as specified and as directed.

S&F 1.60 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as directed.

M&L for preparation of new steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc primer complete all as specified and directed by Engr-in-Charge.

Cleaning of existing covered / uncovered (partly/ semi or fully filled up) drain, of any opening/closing width and depth by removing and re-fixing of cover slab (wherever applicable) taking out accumulated/deposited silt, mud, earth, rubbish, vegetation etc from the drain, washing of the drain with water and removing of the same to a distance outside MOD land complete all as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as directed.

Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr in deep for sewage lines/manholes etc.n.exc 10 sqm on plan and getting out any type of soil complete all as directed.

Returning filling including spreading watering and well ramming in layers n.exc 25cm thick in any type of soil complete all as directed.

Removing excavated soil to a distance of exc. 250 m but n exc. 500 m depositing where directed at low lying area complete all as directed.

M&L for salt glazed stoneware (SGSW) grade 'A' drain pipes 150mm bore laid in trenches and jointed on concrete bed including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 with and including demolition and breaking up existing drain pipes of any description ( like PVC, salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for salt glazed stoneware (SGSW) grade 'A' drain pipes 200mm bore laid in trenches and jointed on concrete bed including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 with and including demolition and breaking up existing drain pipes of any description ( like PVC, salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Cutting into existing manhole removing existing drain making good to wall and rendering cutting out branch channel and making good benching for 150mm dia pipe in cement concrete 1:2:4 complete all as specified and directed.

All as per item No-71 but 200mm dia

M&L for precast RCC 1:2:4 Type-B1 (using 20mm graded crushed stone aggregate) as in manhole cover slab and similar article with plain faces, set in cement 1:4 complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floors with necessary MS clamps including taking down old pipes complete all as specified and directed .

S&F 75 in repair mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floors with necessary MS clamps including taking down old pipes complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) access door bends any radius including taking down old complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) access door bends any radius including taking down old complete all as specified and directed.

S&F in repair 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.

S&F in repair 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.

S&F in repair cast iron spun pipe 75mm bore fixed with walls complete all as specified and directed .

S&F in repair cast iron spun pipe 100mm bore fixed with walls complete all as specified and directed .

S&F 75 mm cast iron pipe Bends (any radius), diminishing pieces or tapers complete all as specified and directed .

S&F 100 mm cast iron pipe Bends (any radius), diminishing pieces or tapers (complete all as specified and directed .

S&F 75 mm cast iron pipe Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 100 mm cast iron pipe Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed .

M&L for cast iron work articles n. exc 5 kg grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters, spiral staircases and similar articles complete all as specified and directed.

M&L for applying two coat of cement base paint to old decorated (cement base painted) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.

Material & labour for preparing old decorated surfaces and applying two coat of exterior acrylic emulsion weather proof paint to old decorated surfaces of walls of any description , over 10cm width or girth not otherwise described, upto 4 storey height complete all as specified and as directed.

M& L for preparing old decorated surfaces of any description and applying one coat of exterior acrylic emulsion weather proof paint to old decorated surfaces of walls of any description, over 10cm width or girth not otherwise described, upto 4 storey height complete all as specified and as directed.

M&L for applying one coat of cement base paint to old decorated (cement base painted) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed .

M&L For Up rooting of plants/roots from walls of bldgs up to extruded root and spraying of acid of required quantity complete from any location of bldg. up to two stories and above and making good disturbed surface with cement mortar (1:4) or cement concrete type C1 (1:3:6) using 20mm graded aggregate etc complete all as specified and directed .

Grubbing up tree trunk girth exc 100 cm and n. exc 15 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site complete all as specified and as directed.

Providing and fixing factory made single extruded WPC (Wood Polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately).

S&F factory made single extruded WPC (Wood polymer composite) solid door/ window / ceosetory windows & other frames/chowkats of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm², modulus of elasticity 900 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge, (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made).

All as per item No 94 above but of frame size 65x100mm

M&L for Factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4, or 6 raised panel design with 5mm thick Moulded prelim PVC sheet on the front face & 5mm plain colour PVC prelim sheet on back face supplying and fixing in the frame at site as per specification & drawing .

Supplying and installing rectangular uPVC- Fixed windows made out of lead free green profiles having a worldwide presence with a GREENLINE mark with frame dimension of 58mm x 52mm x 33mm for windows with corners fusion welded, fully reinforced with Galvanized steel of 1.2mm . The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weather ability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised local fabrication partner . The windows must be installed complete with all kinds of ironmongery and joinery fittings like hinges, handles, stays etc., (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside and Outside of Dowcorning / GE or equivalent. Scaffolding if required will be charged at actuals. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years. The profiles should conform to BSI Quality Management System ISO 9001-2015 and Environmental Management System ISO 14001-2015 and also scaffolding if required for fixing is deemed to include in the rate quoted of Make: Kommerling or equivalent model in Fanesta & in other makes.

Supplying and installing uPVC- Sliding windows/doors made out of lead free green profiles having a worldwide presence with a GREENLINE mark having three tracks and three sashes (shutters) with frame dimension of 104mm x 49mm and sash dimension of 61mm x 47mm x 37mm each with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weather ability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside and Outside of Dowcorning / GE or equivalent. Scaffolding if required will be charged at actuals. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years. The profiles should conform to BSI Quality Management System ISO 9001-2015 and Environmental Management System ISO 14001-2015 and also scaffolding if required for fixing is deemed to include in the rate quoted of Make Kommerling or equivalent model in Fanesta & in other makes

Supplying and installing rectangular uPVC louver windows with bottom fixed made out of lead free green profiles having a worldwide presence with a GREENLINE mark with frame dimension of 58mm x 36mm for windows with aluminium powder coated framework and glass blades for louvers with corners fusion welded, fully reinforced with Galvanized steel of 1.2mm . The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weather ability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised local fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside and Outside of Dowcorning / GE or equivalent. Scaffolding if required will be charged at actuals. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years. The profiles should conform to BSI Quality Management System ISO 9001-2015 and Environmental Management System ISO 14001-2015 and also scaffolding if required for fixing is deemed to include in the rate quoted of Make Kommerling or equivalent model in Fanesta & in other makes.

Supplying and installing uPVC- 1sash casement door made out of lead free green profiles having a worldwide presence with a GREENLINE mark with frame dimension of 58mm x 69mm x 50mm and sash 58mm x 93 x 54mm with corners fusion welded, fully reinforced with Galvanized steel of 1.5mm . The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weather ability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the doors to be assembled and installed by an authorised local fabrication partner . The doors must be installed complete with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside and Outside of Dowcorning / GE or equivalent. Scaffolding if required will be charged at actuals. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years. The profiles should conform to BSI Quality Management System ISO 9001-2015 and Environmental Management System ISO 14001-2015 Make Kommerling or equivalent model in Fanesta & in other approved makes.

S&F Butt Hinges medium weight cold rolled stainless steel 100mm long complete all as specified.

S&F aluminum anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed.

S&F aluminum anodised barrel tower bolts of extruded section 200mm long complete all as specified and as directed.

S&F Aluminum anodised bow handle fabricated type extruded section of 150mm long complete all as directed

S&F Aluminum anodised bow handle fabricated type extruded section of 125mm long complete all as directed

S&F Aluminum aodised sliding door bolts of 250mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F Aluminum aodised sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Providing precast cement concrete 1:1 1/2 :3 Type B1 (using 20mm graded stone aggregate) window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchor-rage blocks, bonders (for stone walling). corbels, brackets, in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete all as specified.

M&L HDPE rotational moulded polyethylene water storage tank of 1000 liters capacity (cylindrical, vertical with closed top) hosted and fixed ,with and including float valve 20mm, ball brass valve, high pressure with polythene float and fly nut, 20mm dia pipe nipple hoisted and fixed in position all as specified.

S&F CP stop/angle cock 15mm bore complete all as specified and directed

S&F Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed in 15mm bore minimum weight 15mm-90gms/ 20mm- 92gms complete all as specified and directed

S&F PTMT grating dome 100 mm dia (minimum weight 25 gms) complete all as specified and directed

S&F towel rail 600 mm long of PTMT fixed with and incl Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms).

S&F in repair Chromium plated brass Bib cock with wall flange (premium range), fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: ARI-39037/ CERA, Cat No: F1005151 / ASIAN PAINTS, Cat No: MYBC101 / PRAYAG, Cat No: 8108 / HINDWARE, Cat No: F390003 / PARRYWARE, Cat No: G1434A1).

S & F Vitreous China wash down water closet pan (Pedestal pattern), white (ETWC) with ‘P’ or ‘S’ trap, including connection to drain or outgoing pipe and including with 10 ltr capacity PVC flushing cistern, including brackets for flush tank, PVC connection 450mm long and 15mm dia to flushing cistern/ sanitary fittings with PTMT nuts of length 450mm and all necessary fittings, inlet, outlet pipe connections, and plastic water closet seat cover, closed pattern with recessed bottom cover and mild steel chromium plated hinge all as specified and directed.

S&F Vitreous China urinals, half stall flat back white with grating, PTMT urinal spreader and union for discharge pipe, 32 mm waste pipe with waste coupling complete all as specified and directed.

S&F Vitreous china squatting pan Orissa pattern wash down water closet white of size 580x440 mm, with integral foot rests complete with P or S trap including with 10 ltr capacity PVC flushing cistern with flush pipe, PVC connection 450mm long etc. complete all as specified and directed.

S&F for Vitreous Cliina wash basin, wliile, flat back, size 580x450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including PTMT waste coupling of 32mm bore and all connections complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and directed.

S&F 15mm bore GI water tubing medium grade laid in floors complete all as specified and directed.

All per item No 122 above but 20 mm bore.

SCHEDULE 'A' PART-II (ELECTRIFICATION WORKS) Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for reuse or removing from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

M & L for concealed type point wiring with 1.50 sqmm (nominal area) FRLSH insulated and unsheathed muld stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/celling including muld steel terminal boxes 1.25 mm thick conforming to IS - 5133(Part -I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked ) for mounting switches/ regulator / bell push etc including 1.50 Sqmm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point / bell point/ ceiling fan / exhaust fan point controlled by one way switch complete all as specified and directed. (a) One light/fan point controlled by one switch.

All as per item No 125 but one 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item No 125 but One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

Description all as per item No 125 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke ( FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green copper conductor as continuous earth wire with lugs complete all as specified and directed.

S&F switch piano flush button AC 230 V Single pole 5/6 Amp one way complete all as specified and directed.

S&F socket outlet 2-in-1, 3 pin, 6 Amp AC 230 Volts flush type complete all as specified and directed.

S&F switch socket combination, 5 pin, 6 Amp AC 230 Volts flush type complete all as specified and directed.

S&F switch piano flush type Single pole 15 Amp one way complete all as specified and directed.

S&F socket outlet 2-in-1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and directed.

S&F ceiling rose surface, polycarbonate/bakelite, three terminals complete all as specified and directed.

S&F in repair LED lights fitting 1x20W, 220 V, AC decorative box with Aluminum housing type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. (Make: Crompton, Cat No.CCS-103-20-65SL-DP-NWH/ / Philips, Cat No. BN021C LED22S PSU CW GR or Equivalent model & makes specified in the tender).

S&F in repair LED lights fitting 150W energy saving, environment friendly & high efficacy suitable for ceiling (surface/ suspended) long life, corrosion registrant, impact proof IP 65 luminaire, connecting up with three core flexible copper conductor cable of 1.5 sqmm from ceiling rose complete all as specified and directed. Make: Havells Catpart: SAUCERPLUSHBP150WLED85760DTOLTG or Equivalent model & makes specified in the tender).

Taking down of old Submain wiring any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.

M&L for sub main wiring with 2 run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through and including PVC conduit (medium grade) of suitable size, surface type complete all as specified and directed. (NOTE : Three runs of single core 10.0 sqmm cable & one run of PVC conduit shall be measured as one unit).

M&L for sub main wiring with 2 run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through and including PVC conduit (medium grade) of suitable size, complete all as specified and directed. (NOTE : Three runs of single core 4.0 sqmm cable & one run of PVC conduit shall be measured as one unit).

S&F Double Door, Sheet Metal Enclosure for DBs (Premium range), for mounting of MCB for 240 Volts, 8 way, with 100 Amps rated copper bus bar, Single Pole & Neutral, complete all as specified and directed.

S&F SPN DB, IP 43 protection, double door (Premium range), 240 volts, 4 way, with 100 Amps copper Bus Bar complete all as specified and directed.

S&F MCB (normal range), 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.

S&F MCB, 'C' series, four pole 415 volts, 63 Amps, breaking capacity 10KA complete all as specified and directed.

M&L for Rewinding of exhaust fan including painting heavy duty 300 mm to 600 mm sweep of any make with super enameled copper winding wire as per existing size and gauge including heating, varnishing, replacement of unserviceable/worn out parts for satisfactory running including electrically connected with flexible wire multi-stranded copper conductor cable of size 23/0.0076 from ceiling rose to fan and testing, complete all as specified and as directed.

S&F Sheet metal enclosure for MCB DB double door 415V Triple pole & Neutral 4 way with common bus bar. Make: Legrand or equivalent of L&T/ Havells

Removing the Air Circulated fan 450/600 mm sweep at any height, opening the fan and rewinding the coil with suitable gauge of copper wire as per site requirement including replacement of capacitor, connector, bearing etc and resemble and refixing at existing height with painting complete all as specified and directed by Engr-in-Charge.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized iron strip 25 X 4 mm (upto 7.5 metres) by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Figure 15A of IS 3043 :1987 and dismantling/taking out of existing unsv earthing, complete all as specified and directed.

KWALITY CONSTRUCTION

UNITED ENGINEERS

M A ENTERPRISES

DEB AND COMPANY

M/S SRINIVASA CONSTRUCTION

SK CONSTRUCTION SYNDICATE & ENGG CO

MS JYOTI INDUSTRIES