Construction of Permanent Building for Jawahar Navodaya Vidyalaya at Reckong Peo in Distt. Kinnaur (H.P) (SH-Principal residence, WS and SI, Ty- III qtrs., W.S. and S.I., Site development and R/wall etc

Amount

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains in all length and width , including dressing of sides and ramming of bottoms,upto all lift including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lifts in all kinds of soil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Foundations, footings, bases of columns etctra

Suspended floors, roofs, landings, balconies and access plat form etctra

Columns, piers, abutments, pillars, posts and struts etctra

Lintels, beams, plinth beams, girders, bressumers and cantilevers etctra

Edges of slab and break in floors and walls in all depth/heights

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etctra.

Stairs, (excluding landings) except spiral staircases etctra

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering from foundation level to all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Cement concrete 1:6:12 (one cement : six coarse sand :twelve graded stone aggreate) 40 mm(forty milimillter) norminal size.

Cement concrete 1:8:16 (one cement : eight coarse sand : sixteen graded stone aggregate) 40mm ( forty millimetre) nominal size.

Cement concrete 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size.

Cement concrete 1:3:6 (one cement : three coarse sand : six graded stone aggregate) 40mm ( forty millimetre) nominal size.

Providing, hoisting and fixing precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering above plinth level up to all floor level but excluding the cost of reinforcement, with 1:1.5:3 (one cement : one point five coarse sand:three graded stone aggregate 20 mm (twenty millimeter) nominal size. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position reinforced cement concrete 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimeter) norminal size) excluding the cost of centering, shuttring, finishing, and reinforcement in foundation and footing , basses of columns and the like and mass concreate, all work upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position reinforced cement concrete 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimeter) norminal size excluding the cost of centering, shuttring, finishing, and reinforcement in walls (any thickness) including attached pilaster, buttresses, plinth and string coureses, fillets, columns,pilliars, piers, abutments,posts, and structs, etctra all work above plinth level upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position reinforced cement concrete 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimeter) norminal size excluding the cost of centering, shuttring, finishing, and reinforcement in beams ,suspended floors, roof having slope up to 15 Degree( fifteen Degree ), Landing, balconies, shelves, chajjas, lintels, bands, plain, window sills,staircases and spiral staircases , etctra all work above plinth level upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel reinforcement (TATA /SAIL / JINDAL PANTHER/RINL) for R.C.C. (reinforced cement concrete) work including straightening, cutting, bending, placing in position and binding complete including cost of binding wire from foundation to all floor level Thermo-Mechanically Treated bars of grade Fe-500D or more steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Stone filling under floor dry hand packed with hard stone of approved quality consolidated properly with hand or mechanical rammer or by hand durmoot to required level as per HPPWD specification 1990 (One thousand Nine hundred Ninety) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying autoclaved aerated cement blocks masonry with 150mm(one hundred fifty)/ 230mm(two hundred thirty)/300 mm(three hundred) thick AAC blocks in super structure above plinth level up to all floor level with RCC (Reinforced cement concrete) band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC(Reinforced cement concrete) band and reinforcement shall be made for seperately). including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying autoclaved aerated cement blocks masonry with 100 mm(hundred millimeter) thick AAC blocks in super structure above plinth level up to all floor level in cement mortar 1:4 (one cement : four coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia(two number six millimeter) M.S. bars at every third course of masonry work.ncluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 20 mm(twenty millimter) thick Baroda green marble having semi round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platform, vanity counters, window sills, facias and similar locations required size, approved shade, color and texture laid over 20mm (twenty millimter) thick base cement mortar 1:4( one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moudling and polishing to edges to give high gloes finish ecttra complete at all levels area of slab up to 0.50 Sqmt.(zero point five zero) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 12 mm (Twelve millimeter) thick prelaminated board both side BWP phenol bounded shutter i/c bright finished / black enamelled iron butt hinges with screws. 40 mm (Forty millimeter) thick frame including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 2nd(second) class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing cup board shutters 25 mm ( twenty five millimetre) thick, panelled or panelled & glazed shutters Second class teak wood including ISI(Indian Standards Institute) marked anodised aluminium but hinges with necessary screws complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Pre-laminated flat pressed 3(three) layer (medium density) particle board or graded wood particle board IS : 3087(indian standard: three thousand eighty seven) marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 (indian standard twelve thousand eight hundred twenty three)marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 18 mm(eighteen millimeter) thick, 150 mm(one fifty millimeter) wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087(indian standard:three thousand eighty seven) marked, including top cover of 6 mm (six millimeter) commercial ply wood conforming to IS: 303(indian standard: three hundred three) BWR grade, nickel plated M.S. pipe 20 mm(twenty millimeter) dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm(ten centimeter) long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm(hundred into forty into forty millimeter)on both inner side of pelmet and rawl plugs 75 mm(seventy five millimeter) long etc. all complete.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing M.S. (mild steel) grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 250x16mm (Two hundred fifty into sixteen millimetre) nominal size. ISI marked oxidised M.S. (Mild steel )sliding door bolts with nuts and screws etc. transparent or dyed to required colour or shade, with nuts and screws etcetra. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing ISI marked oxidised M.S. ( mild steel ) tower bolt black finish, (Barrel type) with necessary screws etc. transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

250x10mm (Two hundred fifty into ten millimetre) nominal size.

150x10mm (one hundred fifty into ten millimetre) nominal size.

Providing and fixing ISI (indian standards institute) marked oxidised M.S. handles conforming to IS:4992(indian standard: four thousand nine hundred ninty two) with necessary screws etc transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

125mm (One hundred twenty five millimetre)

75mm ( seventy five millimetre )

Providing and fixing 90mm(ninty millimeter) oxidised M.S. hasp and staple (safety type) conforming to IS : 363(Indian standard: three hundred sixty three) with necessary screws etc. complete : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 50 mm(fifty millimeter) bright finished brass cup board or wardrobe knob of approved quality with necessary screws. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Structural steel work(TATA/SAIL/Apollo/JSW Make ) welded in single / built up section, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.In trusses and trussed purlins in building including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing angle iron cupboard frame manufactured from M.S. angle iron section 25x25x5 mm(twenty five into twenty five into five millimeter) thickness including hinges jamb,lock jamb,beed and if requird angle threshold of mild steel angle 25X25 mm(twenty five into twenty five millimeter) wel;ded por rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm(two point five millimeter) thick with provision for locking arrangement and shcok absorber as specified including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Steel work welded in built up sections (TATA/SAIL/Apollo/JSW Make ) framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 600x600 mm(six hundred into six hundred millimeter) Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622(indian standard: fifteen thousand six hundred twenty two) of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm(twelve millimeter) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square meter) including grouting the joint with white cement & matching pigments etc. complete.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 600x600 mm(six hundred into six hundred millimeter) Vitrified tiles in (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622,(indian standard: fifteen thousand six hundred twenty two) of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, (indian standard: fifteen thousand four hundred seventy seven)in average 6 mm(six millimeter) thickness, including grouting of joints (Payment for grouting of joints to be made separately).including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Extra for pre finished nosing to treads of steps of kota stone/sand stone complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals in pattern finish approved by the Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (three hundred into three hundred millimeter)(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622(indian standard: fifteen thousand six hundard twenty two) of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm(twenty millimeter) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with greycement slurry @ 3.3 kg/sqm(three point three kilogram per square meter) including pointing the joints with white cement and matching pigment etc., complete.including all incidentals in pattern finish approved by the Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

6mm(six millimeter)thick white glazed tiles dado(30X45cm) (thirty into forty five centimeter) in skirting riser of steps and dado 12mm(twelve millimeter)thick cement mortar 1:3( one cement : three sand) and jointed with cement slurry including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and 150 mm(one hundred fifty millimeter)fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 150 mm(0ne hundred fifty millimeter) bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised - PVC (Polyvinyl chloride) (Polyvinyl chloride)moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standard Thirteen thousand five hundred ninety two) Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand three hundred eighty two ) , leaving 10 mm(ten millimeter) gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Plain Bend 87.5 Degree(Eighty Seven poiny five Degree)

PVC Shoe 110mm (One Hundred ten Millimeter) dia

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) (TATA/SAIL/JSW Make) 0.50 mm ( zero point five zero millimetre) + 0.05 % ( zero point zero five percentage) total coated thickness with zinc coating 120 ( one hundred twenty) grams per square metre as per IS: 277(Indian standred : two hundred seventy seven), in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen) microns. Sheet should have protective guard film of 25 ( twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 ( twelve) metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size 5.5x 55 mm ( five point into fifty five millimetre) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Ridges plain 500 - 600mm ( five hundred to six hundred millimetre) precoated galvanised steel sheet roofing accessories (TATA/SAIL/JSW Make) 0.50 mm (zero point five zero millimetre) + 0.05 % ( zero point zero five percentage) total coated thickness, Zinc coating 120 ( one hundred twenty) grams per square as per IS: 277,(indian standard:two hundred seventy seven) in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Flashings/ Aprons Upto 600 mm ( six hundred millimetre) precoated galvanised steel sheet roofing accessories (TATA/SAIL/JSW Make) 0.50 mm ( zero point five zero millimetre) + 0.05 % ( zero point zero five percentage) total coated thickness, Zinc coating 120 ( one hundred twenty ) grams per sqm as per IS: 277(Indian standred : two hundred seventy seven) , in 240 (two hundred forty ) mpa steel grade, 5-7 ( five to seven ) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing valley 60 cm(sixty centimeter) overall 0.60mm(zero point six zero) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5(five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) dia with prepainted G.I. (Galvanized iron) limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 0.80 mm(zero point eight zero) thick with zinc coating not less than 275 gm/m²(two hundred seventy five grams per square meter) 15 cm(fifteen centimeter) wide, 45 cm(forty five centimeter) overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm(forty into three millimeter) size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing Single socketed pipes 110mm (one hundred ten millimetre) dia of Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 (inian standred: thirteen thousand five hundred ninty two)Type A, including jointing with seal ring conforming to IS : 5382,(indian standred:five thousand three hundred eighty two) leaving 10 mm ( ten millimetre) gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 150 mm (one hundred fifty millimeter)diameter M.S. holder bat clamps of approved design to C.I. or S.C.I . rain water pipes embedded in and including cement concrete blocks 10x10x10cm (ten into ten into ten centimeter) of 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate) 20 mm(twenty millimeter nominal size. and cost of cutting holes and making good the walls etc. : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing double rebated door frame manufactued from ISLC 125 MM (Indian standard light channel one hundred twenty five millimeter) & MS hollow section for rebate 40 x 20 mm (forty into twenty millimeter )and 2.00 mm(two point zero zero) thick welded together for making rebated i/c MS Flat holdfast 30 cm(thirty centimeter) long and 4 mm(four millimeter) thick embedded in C.C Block 1:3:6 (one : three : six) as per design and drawing i/c jambs, lock jamb, beed and if reguired angle threshold of mild steel angle 50 x 25 mm(fifty into twenty millimeter) welded or rigidly fixed by mechanical means lungs with split end tails to each jamb i/c steel butt hinges 2.5 mm(two point five) thick with provision for locking arrangment and shock absorber as specified and applying of steel primer after pretreatment for the surface complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing steel window made of frame with mild steel channel 75 x 40 mm(seventy five into forty millimeter) and mild steel flat of 75 x 4 mm(seventy five into four millimeter) in combination welded toghether and standard section F-7B style of standard size eith sash bar of T-section 25X25X3 mm(twenty five into twenty five into three) and angle iron 25X3mm(twenty five into three millimeter) and joints metered and welded with 16X3.5 mm(sixteen into three point five millimeter) lugs 10cm(ten centimeter) long embded in c.c. block 1:3:6 (one cement :three sand : six stone aggregate) or with wooden plug and screw or rawl plug and screw or with clips or with bots and nuts as required and MS iron fitting complete including P/f glass pan 4mm (four millimeter) thick in glazed and wire gauge of desgnation 85(eighty five) with 0.56mm(zero point five six) dia. in wire gauge panel with glazinf clips and special metal sash putty of approved make complete and applying a coat of approved steel primer after pretreatment of the surface complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm,(thirty five into thirty five into five millimeter) joints mitred and welded by angle iron 40x40x6 mm(forty into forty into six) or 40x6 mm(forty into six millimeter) flat pieces to the existing Tiron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. BP Sheet 1.66mm to 20mm (one point six six to twenty millimeter) thick in eaves board/ facia/ soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm (fifteen millimeter) cement plaster 1:4 (one cement: four fine sand) on rough side of single or half brick wall finished with a floating coat of neat cement of mix :including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm (zero point ninty litre per ten square meter) over an under coat of primer applied @ 0.80 ltr/10 sqm (zero point eighty litre per ten square meter) of approved brand and manufacture including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm cement plaster 1 : 6 (1 cement : 6 fine sand) on the rough side of single or half brick wall of mix : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (zero point nine zero litre per ten square meter)over an under coat of primer applied @0.75 ltr/10 sqm(zero point seven five litre per ten square meter) of approved brand and manufacture

6 mm ( six millimetre )Thick plaster on cement concrete or reinforced cement concrete work with a cement mortar 1:3(one cement : three fine sand) upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying white cement based (Birla White/ J.K ) putty of average thickness 2 mm ( Two millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Distempering with oil bound washable distemper of approved brand manufacturer, of required shade and colour complete, as per manufacture's specification. Two or more coats on new work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm(one point six seven litre per ten square meter) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm(two point two zero kg per ten square meter) exterior paint (ASIAN- APEX ULTIMA /NEROLAC- Wheather Shield) of required shade (Company Depot Tinted) with silicon additives on new work (Two or more coats applied @1.43 litre/ 10 sqm(One point forty three litre per ten square metre). Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm(zero point ninty litre per ten square metre) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying 20 cm. (twenty centimeter)thick composit stone masonry with stone facing of chisel dressed stones one line dressed in cement mortar 1:6(1 cement :6 sand) and backing with cement concrete 1:3:6concrete (one cement: three sand: six graded stone aggregate 20 mm.(twenty millimeter) nominal size on inner face of walls including centring,shuttering and propping complete up to floor all level. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing PVC rigid foam sheet 1 mm (one millimeter ) thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 35 mm (thirty five millimeter ) thick with ISI (Indian Standards Institute) marked M.S. (mild steel) pressed butt hinges bright finished of required size wire gauge shutters using galvanized M.S.(mild steel) wire gauge of average width of aperture 1.4 mm (one point four millimeter )in both directions with wire of dia 0.63 mm(zero point six three millimeter)for doors, windows and clerestory windows with hinges and necessary screws: Kiln seasoned and chemically treated hollock wood including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 35mm (thirty five millimeter) thick ISI(Indian Standards Institute) marked factory made flush doors shutters conforming to IS : 2202(indian standard: two thousand two hundred two) (Part I) (Indian standard two thousand two hundred two part one) non-decorative type, commercial board phenol bonded termite resitant and water proof core of block board construction with full frame of 1st class hard wood well matched commerical 3( Three) ply venrring with vertical grains or cross bands and face venrres on both face of shutter core of block board construction with frame of 1st class har wood and well matched commercial 3 (Three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35mm (Thirty five millimeter) thick i.e. ISI(indian standard institute)marked stainless steel but hinges with necessary screws including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Applying cement slurry on Reinforcement Cement concrete slab or cement concrete work using 2.75 kgs. (Two point seventy five Kilogramme) of cement per square metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete as per HPPWD(Himachal Pradesh Public Work Department) specification 1990 (one thousand Nine hundred Ninety ) volume-I, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Smooth finishing of the exposed surface of R.C.C. (Reinforced cement concrete) work 6 mm(six millimeter) thick with cement mortar 1:3 (one Cement : three fine sand). including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqmmixed (zero point four eight eight kg per square meter mixed) with water proofing cement compound @ 0.253 kg/sqm.(zero point two five three kg per square meter) b) laying second layer of Fibre glass cloth when the first layer is still green.Overlaps of joints of fibre cloth should not be less than 10 cm.(ten centimeter) c) third layer of 1.5 mm (one point five millimeter ) thickness consisting of slurry of cement @ 1.289 kg/sqm(one point two eight nine kg per square meter) mixed with water proofing cement compound @ 0.670 kg/sqm(zero point six seven zero kg per square meter) and coarse sand @ 1.289 kg/sqm.(one point two eight nine kg per square meter) This will be allowed to air cure for 4 hours(four hours) followed by water curing for 48(forty eight) hours. The entire treatment will be taken upto 30 cm(thirty centimeter) on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paidfor separately including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government .

Providing and fixing Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm(eighteen millimeter) thick confirming to IS:14587(indian standrad: forteen thousand fiven hundred eighty seven) with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm(two point zero zero) thick of approved brand (fittings to be paid separately). including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 250x16 mm(two fifity into sixteen milimeter) aluminium sliding door bolts, ISI marked anodised (anodic coatingnot less than grade AC 10 as per IS : 1868,(indian standard: one thousand eight hundred sixty eight) transparent or dyed to required colour or shade, with nuts and screws etc. complete : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing ISI (Indian Standared Institute) marked oxidised Aluminium tower bolt black finish, (Barrel type) with necessary screws etc. transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

250x10mm (Two hundred fifty into ten millimetre) nominal size.

150x10mm (one hundred fifty into ten millimetre) nominal size.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868(indian standard: one thousand eight hundred sixty eight) transparent or dyed to required colour or shade, with necessary screws etc. complete : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

125mm (One hundred twenty five millimetre)

75mm ( seventy five millimetre )

Providing and fixing 150 mm (one hundred fifty millileter) bright finished brass hard drawn hooks and eyes : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 2nd (second) class teak wood wooden moulded beading 50x12 mm(fifty into twelve millimeter) to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails,including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Cement concrete flooring 1:2:4 (One cement : two coarse sand : Four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry,but excluding the cost of nosing of steps etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 40 mm(forty millimeter) wide and 4 mm(four millimeter) thick glass strips in joints of terrazo/ cement concrete floors. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing miled steel tube (TATA/SAIL/Apollo/JSW Make ) hand rail of approved size by welding etcetra to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Pointing on stone work Flush/ Ruled pointing with cement mortar 1:3 (one cement : three fine sand) :including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

White washing with lime to give an even shade New work (three or more coats) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15mm(fifteen millimeter) cement plaster in pattern in single coat with 1:6(one cement : six sand) finished neat cement on the fair side of brick/concrete/stone wall for interior plastering upto all floor level. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Udaipur green marble stone flooring with 18 mm(eighteen millimeter) thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm(twenty millimeter) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with grey cement slurry,including rubbing and polishing complete with : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m(one point five meter), including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm ( twenty centimeter) in depth, including consolidating each deposited layer by ramming, watering, etc.and disposing of surplus excavated soil as directed, within a lead of 50 m(fifty meter) : Pipes, cables etc, not exceeding 80 mm(eighty millimeter) dia. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20 mm(twenty millimeter) nominal bore G.I. (Galvanized Iron ) pipes complete with G.I. (Galvanized Iron ) fitting including trenchand refilling etc.External Work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing G.I. (Galvanized Iron )Pipes complete with G.I. (Galvanized Iron ) fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm (fifteen millimeter)

20 mm (twenty millimeter)

Making connection of G.I(Galvanized Iron ) distribution branch with G.I. (Galvanized Iron ) main 25mm (twenty five millimetre) to 40 mm ( forty millimetre) nominal bore by providing and fixing tee including cutting and threading the pipes etc cera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Fixing water meter and stop cock 200 mm(two hundred millimeter) nominal bore in G.I. (Galvanized Iron ) pipe line including cutting and threading the pipe and making long screws etc. complete ( cost of water meter and stop stop cock to be paid seprately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701(indian standard Twelve thousand seven hundred one) marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing masonry Chamber 30x30x50 cm (thirty into thirty into fifty centimeter) inside, in brick work in cement mortar 1:4 (one cement :four coarse sand) for stop cock, with C. I.(Cast Iron) surface box 100x100 x75 mm (one hundred into one hundred into fifty millimeter) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand :four graded stone aggregate 20 mm (twenty millimeter) nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate 40mm (forty milllimeter) nominal size ) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12mm (twenty millimeter) thick, finished With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (seven pont five)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipe ISI marked including fitting with approved adhesive etc. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

150mm(one hundred fifty millimeter) dia.

110mm(one hundred fifty millimeter) dia.

Providing and fixing PVC(Polyvinyl chloride) single equal branch with oval access door, ISI(Indian Standards Institute) marked insertion rubber washer 3mm (three millimeter) thick bolts and nuts complete including fixing with aprooved adhesive etc. complete 150 mm(one hundred fifty millmeter) dia including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

150mm(one hundred fifty millimeter) dia.

110mm(one hundred fifty millimeter) dia.

Providing and fixing PVC (Polyvinyl chloride) door bend with oval access door,insertion rubber washer 3mm(three millimeter) thick bolts and nuts ISI(Indian Standards Institute) marked complete including fixing with aprooved adhesive etc. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

150mm(one hundred fifty millimeter) dia.

110mm(one hundred fifty millimeter) dia.

Providing and fixing PVC(Polyvinyl chloride) single equal branch plain ISI(Indian Standards Institute) marked insertion rubber washer 3mm (three millimeter) thick bolts and nuts complete including fixing with aprooved adhesive etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

150mm(one hundred fifty millimeter) dia.

110mm(one hundred fifty millimeter) dia.

Providing and fixing PVC (Polyvinyl chloride) collars ISI(Indian Standards Institute) marked including fixing with aprooved adhesive etc complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

150mm(one hundred fifty millimeter) dia.

110mm(one hundred fifty millimeter) dia.

Providing and fixing PVC (Polyvinyl chloride) plain bend ISI (Indian Standred Institite) marked including fixing with approved adhesive etc. complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

150mm(one hundred fifty millimeter) dia.

110mm(one hundred fifty millimeter) dia.

Providing and fixing PVC (Polyvinyl chloride) clamps ISI (Indian Standred Institite) marked of approved design with steel screws and rawal plugs etc. complete,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

150mm(one hundred fifty millimeter) dia.

110mm(one hundred fifty millimeter) dia.

Providing and fixing 110 mm x 90 mm (One hundred ten millimeter into ninty millimeter), PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type of CERA,HINDWARE,PARRYWARE, make) with soft closing seat and lid, 10 (ten) litre low level white vitreous china flushing cistern CERA,HINDWARE,PARRYWARE make)and C.P. flush bend with fittings and C.I. brackets, 40 mm ( forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid hindware or cera EWC No 20049 ( twenty thousand forty nine) Snow White Shade including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 150 mm (One hundred fifty millimeter) size 'P' or 'S'trap for water closet ( squatting pan) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC (Polyvinyl chloride) Cowl including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

150mm dia (one hundrded fifty millimeter)

110mm dia (one hundrded ten millimeter)

Providing and fixing size 580x440 mm (five hundred eighty into four hundred fourty millimeter)white vitreous china water closet squatting pan (Indian type CERA,HINDWARE,PARRYWARE, ) :Orrisa pattern long pattern of hindware or its equivalent including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 10.00 ltrs(ten point zero zero litre) capacity PVC (Polyvinyl chloride) low level duel flushing cistern CERA catlogue No. 2603 or equivalent with a pair of brackets with fittings such as lead valve, less syphon, 15 mm(fifteen millimeter) nominal size PVC ball valve with polythene float, pvc handle , union, coupling for connection with inlet, outlet and overflow pipes 40 mm(forty millimeter) dia PVC flush bend with cistern and closet & over flow pipe to be paid for separately )including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing White solid plastic seat with lid for pedestal type W.C. (water closet) pan complete :including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :550X400 mm (five hundred fifty into four hundred millimeter) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Stainless Steel A ISI (18/8)(Indian standard institute eighteen / eight) kitchen sink 510X1040 mm (five hundred ten into one thousand forty millimeter) bowl depth 250 mm as per IS: 13983(Indian standard : Thirteen thousand nine hundred eighty three) with C.I. (cast iron) brackets and stainless steel plug 40 mm,(forty millimeter) including painting of fittings and brackets, cutting and making good the walls wherever required : ncluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) make of Atul,Modi Guard Golden Fish complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. (chromiun plated) brass screws and washers completeof including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20 mm(twenty millimeter) dia galvanised mild steel puff pipe 1m (one meter) long with brass perfoated cap with including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 32 mm dia.(thirty two millimeter) nominal bore C.P. (chromium plated) brass chain and rubber plug complete for sink or wash basin: including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Cutting and chasing 75mm(seventy five millimeter) wide 50mm (fifty millimeter) deep (average size) in wall for conduits pipes and filling the same with cment concrete 1:3:6 ( one cement :three sand :six graded stone aggregate 20mm (twenty millimeter) nominal size) after the conduit pipe is laid ( exculding the cost of conduit pipe) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

150mm dia (one hundrded fifty millimeter)

110mm dia (one hundrded ten millimeter)

Providing and fixing PTMT (Polytetra Methylene Terephthalate) towel rail complete with brackets fixed to wooden cleats with CP (chromium plated ) brass screws with concealed fittings arrangement of approved quality and colour 600 mm (six hundred millimeter) long towel rail with total length of 645 mm (six hundred forty five millimeter), width 78 mm (seventy eight millimeter) and effective height of 88 mm (eighty eight millimeter), weighing not less than 190 gms (one hundred ninty grams). including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100 mm (one hundred millimeter) sand cast Iron grating for gully trap quality and make as approved by Engineer in charge make of Jal, Jaquar Parryware, Hindware including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PTMT (Polytetra Methylene Terephthalate) soap Dish Holder having length of 138mm,( one hundred thirty eight millimetre ) breadth 102mm ( one hundred two millimetre ) height of 75mm ( seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 gms. ( one hundred six gram) of Jal, Jaquar Parryware, Hindware Make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) dia C.P.(chromium plated) brass bib cock of approved quality including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm dia CP (chromium plated) brass pillar tap of jaquar with capstan head (heavy duty ISI marked IS : 8931&89349(indian standrad eight thousand nine hundred thirty one & eighty nine thousand three hundred forty nine) Including carriage of materials within all leads and lifts:- including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 15mm (fifteen millimeter) nominal bore C.P. (chromium plated) brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931(indian standard: eight thousand nine hundred thirty one) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing uplasticised PVC (Polyvinyl chloride) connection pipe with brass unions 30cm ( thirty centimetre ) length 15mm (fifteen millimetre) nominal bore Cera/Jaquar/ Finolex / hindware Make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing brass full way valve with wheel 45 cm(forty five) length including carriage of material within all leads and lifts:-including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm nominal bore(fifteen millimeter)

20 mm nominal bore(twenty millimeter)

Providing and fixig G.I.(Galvanized Iron) or M.I. union of following sizes (where not included in the item) including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm nominal bore(fifteen millimeter)

20 mm nominal bore(twenty millimeter)

Providing and fixing 32mm (thirty two millimeter ) dia lead waste pipe for wash basin or sink including brass check nut.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 150 mm(one fifty millimeter) diameter S.W.(Stone ware) pipe cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm(forty millimeter) nominal size) all-round S.W.(Stone ware) pipes including bed concrete as per standard design including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 8 mm (eight millimetre) dia C.P. (chromium plated )/ S.S. Jet with flexible tube upto 1.00 (one point zero zero) metre long with S.S. triangular plate to Eureopean type W.C.(water closet) of quality and make ( Jaquare Opal series) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing, laying and jointing glazed stoneware pipes 1500 mm (one hundred fifty millimeter)diameter class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (one cement : one fine sand) including testing of joints etc. complete : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and fixing C.I. (chromium plated) cover without frame for manholes 455x610mm (four hundred fifty five into six hundred ten millimeter) rectangular C.I.(chromium plated) cover (light duty) the weight of the cover to be not less than 23 kg (twenty three kilogram) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : onepoint five coarse sand : three graded stone aggregate 20 mm (twenty millimeter) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand : 8 graded stone aggregate 40 mm (forty millimeter)(one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimeter) nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 80x80cm and 50cm (eighty into eighty into one fifty centimeter) deep including C.I.(cast iron) cover with frame (medium duty) 500 (five hundred millimeter) mm internal diameter, total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilogram) (weight of cover 58 kg (fifty eight kilogram) and weight of frame 58 kg(fifty eight kilogram)) : With Sewer bricks conforming to IS : 4885 (Indian Standred : four thousand eighy hundred eighty five) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450(indian standard fifteen four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 20mm (twenty millimetre) nominal size of Kitech make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

1216 (16mm OD (one thousand two hundred sixteen(sixteen millimeter ) pipe

1620 (20 mm OD ) (one thousand six hundred twenty (twenty millimeter)) pipe

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

(a) Equal Tees:- (i)1216 mm size (one thousand two hundred sixteen millimeter)

(ii) 1620 mm size (one thousand six hundred twenty)

(b) Reducing Tee:- (i) 1620 (one thousand six hundred twenty) X all branches

(ii) 2025 ( two thousand twenty five) X all branches

(c) Female branch Tee:- (i) 1216 X1216 X 15 mm thread (one thousand two hundred sixteen into one thousand two hundred sixteen into fifteen millimeter )

(ii) 1620 X1620 X 15 mm thread (one thousand six hundred twenty into one thousandsix hundred twentyinto fifteen millimeter)

(d) Female Elbows:- (i) 1216 X 15 mm thread (one thousand two hundred sixteen into fifteen millimeter)

(ii) 1620 X 15 mm thread (one thousand six hundred twenty into fifteen millimeter)

(e) Male thread connector:- (i) 1216 X 15 mm thread (one thousand two hundred sixteen into fifteen millimeter)

(ii) 1620 X 15 mm thread (one thousand six hundred twenty into fifteen millimeter)

(f) Female thread connector:- (i) 1216 X 15 mm thread (one thousand two hundred sixteen into fifteen millimeter)

(ii) 1620 X 15 mm thread (one thousand six hundred twenty into fifteen millimeter)

(g) Couplers:- (i) 1216 mm (one thousand two hundred sixteen millimeter)

(ii) 1620 mm (one thousand six hundred twenty millimeter)

(h) Reducers:- (i) 1620 X 1216 mm (one thousand six hundred twenty into one thousand two hundred sixteen millimeter)

(ii) 2025 X 1216 mm ( two thousand twenty five into one thousand two hundred sixteen millimeter)

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimeter) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand : eight graded stone aggregate 40 mm (forty millimeter) (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimeter) nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 80x80cm and 100cm (eighty into eighty into one hundred centimeter) deep including C.I. (cast iron ) cover with frame (medium duty) 500 mm (five hundred millimeter) internal diameter, total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilogram) (weight of cover 58 kg (fifty eight kilogram) and weight of frame 58 kg (fifty eight kilogram)) : With Sewer bricks conforming to IS : 4885(indian standard: forty thousand eight hundred eighty five) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 32 mm(thirty two millimeter) dia C.P. (chromiun plated )brass waste ( heavy duty ISI marked IS: 8931 & 8934(indian standard:eight thousand nine hundard thirty one & eight thousand nine hundred thirty four) for wash absin or sink including carriage of material with inall leads lift: including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavation in earth work in hilly area in all heights and depths and in all kinds of soil manual/ mechanical means including saturated soil comprising of mixed soil, ordinary rock and hard rock and all work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side , water polution , etcetra and to protect stability of hill side, the track shall be excavated with chiseling and wedging-out of rock (where blasting is prohibited) , All earth work in cutting/ excavation, including rock excavation shall be carried out true to lines, grades, side slopes, width chamber , super elevation and lable as soon on the drawings or as directed by the Enginner-in-charage , in conformit with the requirment of technical specification for rural road , clause 1603.1 (one thousand six hundred three point one) and 1603.2 (one thousand six hundredthree point two) of general conditions for contract to achive designed formation width including hauling and stactking of matiral useful for construction at suitable sites and safe disposal and damping to be arranged by thr contractor of unsuitable cut matirals in specified manner, triming , filling of unevenness , blindage and finishing of the road to specified dimensions or as directed by the Enginerr-in charge for smooth riding. The recovercy for stones , weather useful for not , for 22.85 cum (Twenty two point eighty five cubic meter ) shall be in all cases @ rupees 300/-only (Rupees threehundrad only) per cubic meter shall be effected on pro-data basis. any loss to the public and private property during the course of excavation shall be the absolute responsibility of the contractor. which shall compensated by him in all cases. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Random rubble mansory with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement: six coarse sand: twelve graded stone aggregate 20mm(twenty millimeter nominal size) upto plinth level with : cement mortar 1:6 (one cement :six coarse) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, (five centimeter to twenty centimeter)in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing weep holes in brick masonry /stone masonry/plain reinforced concrete abutments, wing wall, return wall,with 100mm (One hundred millimeter) dia PVC (Polyvinyl chloride) pipe extending through the full width of the structures with slope of 1(v):20(H) (One vertical : twenty horizontal) towards drawing face complete as per drawing and technical specification clauses 614(six hundred fourteen) ,709(seven hundred nine) ,1204.3.7(one thousand two hundred four point three point seven) (For R/wall) , including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying Red sand stone 40 mm(forty millimeter) thick fine dressed stone flooring over 20mm(twenty millimeter) (average) thick base of cement mortar 1:5 (one cement : five coarse sand) with joints finished flush.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying 80 mm(eighty millimeter) thick C.C. (cement concrete) paver block of M-30 ( M-thirty ) grade with approved color design and pattern. factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100 mm diameter (one hundred millimeter) soil, waste and vent pipes Sand cast iron S&S pipe as per IS: 1729 (Indian Standrad : One Thousand Seven Hundred Twenty Nine) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm(hundred millimeter) sand cast iron Cowl including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing G.I. (Galvanized Iron) Pipes complete with G.I. (Galvanized Iron) fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

40 mm (forty millimeter)

32 mm (thirty two millimeter)

Providing and fixing gun metal gate valve with C.I. ( Cast iron)wheel of approved quality (screwed end) make of Leader, Zoloto, Kilbum, CIM, Valves Sant including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

25mm (twenty five millimetre) nominal bore

32 mm (thirty two millimeter)

40 mm (forty millimeter)

Providing 200mm (two hundred millimeter)wide cast iron Rungs with chequered or ribbed non slip surface including fixing with 200mm x 200 mm x 100mm(two hundred into two hundred into hundred millimeter) cement concrete 1:3:6 ( one cement : three sand : six graded stone aggregate 20mm(twenty millimeter) nominal size complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and fixing 500 mm (five hundred millimeter)diameter C.I. cover (Cast Iron Cover) (medium duty) the weight of the cover to be not less than 58 kg(fifty eight kilograms) C.I. cover (Cast Iron cover) without frame for manholes :including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

MUNISH SHARMA