PROVN OF LANDSCAPING AT NEW EASTERN MALL COMPLEX AND SPECIAL REPAIR/REPLACEMENT TO INTERNAL WIRING, FITTING AND FIXTURES AT DIFFERENT UNIT AT PMS

Amount

Surface dressing n.exc 15 cm deep in soft / loose soil all as specified including clearing away all grass vegetation, saplings, shrubs, brush wood, under growth, roots and trees n. exc. 30cm girth and removing rubbish upto a distance of 50 metre out of the periphery of the area complete all as specified and as directed.

M&L for rolling and consolidating existing formation surfaces in cutting with 8 to 12 tonne power roller complete all as spd and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as spd and directed.

Preparation of beds for hedging and shrubbery by excavating 30 cm deep , refilling the excavated earth after breaking clods or of good soil and mixing with Combine equal parts of topsoil, sand, and compost, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete including Grassing with mexican grass lawn including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed In rows 5 cm apart in both directions. (cost of soil, compost and grass seed are deem to be included in the quoted rate)

S&F for 3 seater mild steel frame & FRP stripes of high durability frame painted with powder coated paint for smooth finish and tolerate maximum seating weight 350kg , (size- 160cmx 60cmx 78cm) ,garden bench for outdoor park (black+ wooden texture) complete all as spd and directed.

M&L for supply and planting garden ready plants "Hibiscus" (Hibiscus) of height exc 0.60m but exc 1.20 meter and stem diameter (caliper) of at least 1 cm (10 mm) at its base complete including supply of plants as specified, transportation to site, digging of soil, watering measuring/fertilizing using processed cowdung, varmit composit cocopeat and other organic fertilizers and applying plant protection chemicals as per standard horticulture norms, as advised by the nursery suppling the plants complete all as specified and directed

M&L for supply and planting garden ready plants "Zoomgreen Rose/China Rose/Damask Rose/Red Rose" of height not less than 0.60 meter and caliper not less than 9.00mm at its base complete including supply of plants as specified, transportation to site, digging of soil, watering measuring/fertilizing using processed cowdung, varmit composit cocopeat and other organic fertilizers and applying plant protection chemicals as per standard horticulture norms, as advised by the nursery suppling the plants complete all as specified and directed

M&L for supply and planting garden ready plants "Roystonia Regia" (Royal Palm) of height not less than 1.5 meter and Caliper (Trunk Diameter) 8 to 15 cm at its base complete including supply and planting of plants by digging holes of 1.00m dia and 1.00m depth in ordinary soil and refilling the same with the excavated earth mixed manure or sludge in the ratio of 2:1 by volume (2 parts if stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water filling with earth if necessary and finally fine dressing, levelling etc including removal of surplus earth if any and declared unservicable earth to a distance not exceeding 100m and depositing where directed by spreading and levelling at a level not exceeding 1 metre above the starting point including anti termite treatment by digging pits 30 cms deep and 4 cm dia, 6 to 7 holes around the tree using chemical emuslion at the rate of 1.5 ltr per hole in two time or more application to get the trees free from termite infection chemical using Chlorpyriphos 20% EC in the ratio of 1% concentration complete all as specified and directed. (i) The contractor's quoted rate shall be inclusive of excavation, earthwork, manure, sludge, antitermite treatment, pesticide, supply of good earth from outside MD land if not found suitable from the excavated earth, etc nothing extra shall be paid on this account.

M&L for supply and planting garden ready plants "Spathodia Campanulata" (Tulip Tree) of height 0.60m to 1.20 meter and Caliper (Trunk Diameter) 1 to 3 cm at its base complete including supply and planting of plants by digging holes of 1.00m dia and 1.00m depth in ordinary soil and refilling the same with the excavated earth mixed manure or sludge in the ratio of 2:1 by volume (2 parts if stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water filling with earth if necessary and finally fine dressing, levelling etc including removal of surplus earth if any and declared unservicable earth to a distance not exceeding 100m and depositing where directed by spreading and levelling at a level not exceeding 1 metre above the starting point including anti termite treatment by digging pits 30 cms deep and 4 cm dia, 6 to 7 holes around the tree using chemical emuslion at the rate of 1.5 ltr per hole in two time or more application to get the trees free from termite infection chemical using Chlorpyriphos 20% EC in the ratio of 1% concentration complete all as specified and directed. (i) The contractor's quoted rate shall be inclusive of excavation, earthwork, manure, sludge, antitermite treatment, pesticide, supply of good earth from outside MD land if not found suitable from the excavated earth, etc nothing extra shall be paid on this account.

M&L for supply and planting garden ready plants "Syzygium plant" (Jamun Tree) of height 0.60m to 1.20 meter and Caliper (Trunk Diameter) 1 to 3 cm at its base complete including supply and planting of plants by digging holes of 1.00m dia and 1.00m depth in ordinary soil and refilling the same with the excavated earth mixed manure or sludge in the ratio of 2:1 by volume (2 parts if stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water filling with earth if necessary and finally fine dressing, levelling etc including removal of surplus earth if any and declared unservicable earth to a distance not exceeding 100m and depositing where directed by spreading and levelling at a level not exceeding 1 metre above the starting point including anti termite treatment by digging pits 30 cms deep and 4 cm dia, 6 to 7 holes around the tree using chemical emuslion at the rate of 1.5 ltr per hole in two time or more application to get the trees free from termite infection chemical using Chlorpyriphos 20% EC in the ratio of 1% concentration complete all as specified and directed. (i) The contractor's quoted rate shall be inclusive of excavation, earthwork, manure, sludge, antitermite treatment, pesticide, supply of good earth from outside MD land if not found suitable from the excavated earth, etc nothing extra shall be paid on this account.

Note : for ser item No 4.00 & 6.00 to 10.00 The quoted rates shall deem to be included the followings:- (a) Maint of planted trees and shrubs (Hedges) hoeing, wedding pruning, removal of garden rubbish, spraying manure vermin-compost, neem cake & micro nutrients etc as per standard procedure and as directed by Engr-in-Charge/ GE, protecting the trees and shrubs, keeping good health of plants so as to keep the plant live in entire Defect Liability Period and replacing the dead trees and shrubs with the size as per time grown new live trees and shrubs (within 48 hrs) etc and make all necessary arrangement to keep the plant live and healthy for entire Defect Liability Period.

Taking down carefully aluminium conductor/Copper conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.

M & L for concealed point wiring complete with 1.5 sq mm FRLSH ,PVC insulated multi stranded copper conductor single core cable 1100 volts grade (Red Colour use for Phase & Black Colour use for Neutral),drawn into and including non metalic PVC rigid conduit medium grade of suitable size and conduit accessories fixed on wall, floor, roof etc. and WITHincluding of FRLSH PVC insulated 1.5 sq mm copper conductor for earth continuity (Green Colour) and connected to common earth dolly and including pressed steel terminal flush boxes made out of 1.6 mm thick MS sheet suitable for modular switches concealed in wall , with and including modular cover plate with frame of suitable module for housing the switches socket,outlet etc.,all as specified and directed by Engineer-in-Charge for one light point controled by one one way 5/6 Amp switch (a) Note :- Cost of PVC conduit, cutting chases of wall, making good disturbed wall surfaces including finishing with cement mortor 1:4, matching with existing colour/paint of surface are deemed to be included in the quoted rate.

All as per item No. 13.00 here-in- before but 5 Amp socket on same board with other switches.

All as per Item No 13.00 here-in- before but for one calling bell point controlled by one one way Bell switches.

All as per BOQ item No 13.00 here-in-before but for one power pointt using by 2.50 sq mm FRLSH,PVC insulated multi stranded copper conductor single core cable 1100 volts grade (Red Colour use for Phase & Black Colour use for Neutral), and with and including FRLSH,PVC insulated multi stranded copper conductor single core 2.50 sq mm conductor for earth continuity (Green Colour) , on independent board ( but Not below the switch board of light points in the same vertical plane).

All as per BOQ item No 13.00 here-in-before but for one power pointt using by 4.00 sq mm FRLSH,PVC insulated multi stranded copper conductor single core cable 1100 volts grade (Red Colour use for Phase & Black Colour use for Neutral), and with and including FRLSH,PVC insulated multi stranded copper conductor single core 4.00 sq mm conductor for earth continuity (Green Colour) , on independent board ( but Not below the switch board of light points in the same vertical plane).

Supply & Fixing switch modular type 6 Amp one way, one module, single phase, complete all as specified and directed. (Note : Item to be measured if executed under new point wiring)

S&F socket outlet 5 Amps, 5 pin, modular type, 2 module , single phase with shutter complete all as specified and as directed. (Note : Item to be measured if executed under new point wiring)

Supply & Fixing switch modular type 15/16 Amp one way, two module, single phase, complete all as specified and directed.(Note : Item to be measured if executed under new point wiring)

S&F socket outlet 15/16 Amps,6 pin, modular type, 2 module , single phase shutter typed complete all as specified and as directed. (Note : Item to be measured if executed under new point wiring)

Supply & Fixing bell push ,modular type 6 Amp SP one way, 1 module , complete all as specified and as directed. (Note : Item to be measured if executed under new point wiring)

Supply & Fixing fan regulator modular step type 120 W 2 module suitable for 230 volt .cmplete all as specified and as directed. (Note : Item to be measured if executed under new point wiring)

Material & Labour for point wiring complete with 1.5 sq mm FRLSH, PVC insulated multi stranded copper conductor single core cable 1100 volts grade (Red Colour use for Phase & Black Colour use for Neutral),drawn into and including PVC casing- caping (double interlock type) of not less than 20mm width with accessories and fittings such as bends, elbows, tees, crosses, junction box etc, fixed on wall/ceiling with GI saddles, GI screws, rawl plugs etc. for one light/fan/ bell point controlled by one switch including pressed steel terminal box powder coated of suitable size with 3 mm thick plastic laminated sheet cover of approved make for housing/mounting switches, sockets & regulators etc. and drawing 1.5 sq. mm copper solid conductor PVC insulated, unsheated cable as earth continuity conductor, connected to common earth and earth dolly , all as specified and directed by Engineer-in-Charge Note :- Cost of PVC casing & capping, making good disturbed wall surfaces including finishing with cement mortor 1:4, matching with existing colour/paint of surface are deemed to be included in the quoted rate. (ii) Length of point wiring up to 7.50 meter and to be measured from switches to ceiling rose or to the actual load.

All as per Item No 24.00 here-in- before but for one calling bell point controlled by one one way Bell switches.

All as per item No 24.00 here-in- before but 5 Amp socket on same board with other switches.

All as per BOQ item No 24.00 here-in-before but for one power pointt using by 2.50 sq mm FRLSH,PVC insulated multi stranded copper conductor single core cable 1100 volts grade (Red Colour use for Phase & Black Colour use for Neutral), and with and including FRLSH,PVC insulated multi stranded copper conductor single core 2.50 sq mm conductor for earth continuity (Green Colour) , on independent board ( but Not below the switch board of light points in the same vertical plane).

All as per BOQ item No 24.00 here-in-before but for one power pointt using by 4.00 sq mm FRLSH,PVC insulated multi stranded copper conductor single core cable 1100 volts grade (Red Colour use for Phase & Black Colour use for Neutral), and with and including FRLSH,PVC insulated multi stranded copper conductor single core 4.00 sq mm conductor for earth continuity (Green Colour) , on independent board ( but Not below the switch board of light points in the same vertical plane).

Supply and fixed switch piano flush type, single pole , 5/6 Amps, one way complete all as specified. (Note : Item to be measured if executed under new point wiring)

Supply & Fixing socket outlets 2 in 1, 5/6 Amps, 230/240 V complete all as specified and as directed .(Note : Item to be measured if executed under new point wiring)

Supply and fix switch socket combination 2 in 1 multipurpose 5 pin ,(6 Amps ) flush type controlled by one switch complete all as specified. (Note : Item to be measured if executed under new point wiring)

Supply and fixed switch socket combination 5 in 1 , 6 pin ,(5/16 Amps ) flush type controlled by one switch complete all as specified. (Note : Item to be measured if executed under new point wiring)

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified. (Note : Item to be measured if executed under new point wiring)

Supply & fixed stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified . (Note : Item to be measured if executed under new point wiring)

Supply & fixed Bell push , flush type , 5 amp complete all as specified. (Note : Item to be measured if executed under new point wiring)

Supply & fixed Buzzer, Ding dong, AC 230 Volts, single pole 230 volts all as specified and directed. (Note : Item to be measured if executed under new point wiring)

Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings complete all as specified. (Note : Item to be measured if executed under new point wiring)

Supply and fixing for concealed type sub main wiring with two run of 4.00 Sqmm single core PVC FRLSH PVC insulated unsheathed stranded copper conductor (Red/yellow/blue wires for phases and black wire for neutral) drawn in and including through Rigid non-metallic PVC conduit(medium) ISI marked of size 25mm bore with all fittings like tee/Bend/Elbow/Reducer/Bell mouth/Junction / Terminal Boxes etc. and fixing accessories such as coupler, lock nuts, saddles, pipe hook etc. including one run of 4.00 Sqmm single core PVC FRLSH PVC insulated unsheathed stranded copper conductor as earth wire (green in colour) complete all as specified. Note : (i) Note : 2 runs of line conductor, one run of earth continuity conductor, one run of PVC conduit shall be measured as unit length. (ii) Cost of PVC conduit, conductors, making good disturbed wall surfaces including finishing with cement mortor 1:4, matching with existing colour/paint of surface are deemed to be included in the quoted rate.

All as per BOQ item No 38.00 here-in-before but with two run of 6.00 Sqmm single core PVC FRLSH, PVC insulated unsheathed stranded copper conductor (Red/yellow/blue wires for phases and black wire for neutral) and one run of 6.00 Sqmm single core PVC FRLSH, PVC insulated unsheathed stranded copper conductor as earth wire (green in colour)

Supply and fixing for surface type sub main wiring/circuit wiring with two run of 4.00 Sqmm single core PVC FRLSH, PVC insulated unsheathed stranded copper conductor (Red/yellow/blue wires for phases and black wire for neutral) drawn in and including drawn into and including PVC casing- caping (double interlock type) of not less than 25mm width with accessories and fittings such as bends, elbows, tees, crosses, junction box etc, fixed on wall/ceiling with GI saddles, GI screws, rawl plugs etc. including one run of 4.00 Sqmm single core PVC FRLSH, PVC insulated unsheathed stranded copper conductor as earth wire (green in colour) complete all as specified. Note : (i) Note : 2 runs of line conductor, one run of earth continuity conductor, one run of PVC casing caping shall be measured as unit length. (ii) Cost of PVC casing caping, conductors, making good disturbed wall surfaces including finishing with cement mortor 1:4, matching with existing colour/paint of surface are deemed to be included in the quoted rate.

All as per BOQ item No 40.00 here-in-before but with two run of 6.00 Sqmm single core PVC FRLSH, PVC insulated unsheathed stranded copper conductor (Red/yellow/blue wires for phases and black wire for neutral) and one run of 6.00 Sqmm single core PVC FRLSH, PVC insulated unsheathed stranded copper conductor as earth wire (green in colour)

S & F in repair LED street/security lights nominal power 60 Watt, LED of Make Osram; Everlight; Philips; Nicha; Cree; Samsung, LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen efficacy of minimum 110 lumens per watt, built-in integrated electronic LED driver, output open /short circuit protection, phase to phase protection, over voltage protection, surge voltage protection upto 4 KVs, protection grade IP 66, CRI greater than 80%, CW available CCT of 5700K, power factor of minimum 0.95, pressure die-cast aluminium alloy housing with epoxy powder coated metallic silver finish after phosphochromate treatment, life span of minimum 50000 working hours including fixing at any height and including wiring using three core PVC insulated, PVC sheathed, flexible stranded copper conductor FR-LSH cables suitable for outdoor use, 1.5 sqmm as per IS 694: 2010 complete all as specified and as directed.

Taking down existing panel light fitting any type (600 mm x 600 mm) recess mounting/surface and S&F LED light fitting 36 watt recess mounting of size 600 mm x 600 mm , , LED wattage of minimum 3 watt each and Maximum 5 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen efficacy of minimum 115 lumens per watt, isolated electronic LED driver (SMPS based constant current supply) with output short circuit protection, over voltage protection, surge voltage protection upto 2 KVs, protection grade IP 20, CRI greater than 80%, bema angle of 120 clear, ITHD below or less than 15%, WW available CCT of 3000K power factor of minimum 0.95, CRCA powder coated white after phosphochromate treatment housing, life span of minimum 50000 working hours including making electric connection from source with PVC sheathed copper conductor wire of 1.5 Sqmm x 3 core complete all as specified and directed by EIC.

S&F in repairs LED 20 Watt tube light fitting intregated type, including LED retrofit tube lamp 20 W , LED tube light nominal power 20 Watt, LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, , lumen efficacy of minimum 110 lumens per watt, , integrated electronic driver (SMP based constant current supply) with output short circuit protection and surge protection upto 2.5 KV, protection grade IP 20, CRI greater than 80%, bema angle of 120 clear, THD below or less than 20%, CW available CCT of 6500K, power factor of minimum 0.95 life span of minimum 50000 working hours and LED batten with aluminium housing and polycarbonate diffuser complete fitting including connecting with PVC insulated multistranded copper flexible cable 1.0 sqmm three core, and PVC round/ square box white colour x 2 Nos for mounting of fitting complete all as specified & directed. . Note (i) Make of batten and LED tube lamp should be of same make.

Supply & fixing in repair LED light fitting 12 watt surface mounted round extruded aluminium housing down lighter with superior light output as per existing size and shape , LED wattage of minimum 3 watt each and Maximum 5 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen efficacy of minimum 110 lumens per watt, isolated electronic LED driver (SMPS based constant current supply) with output short circuit protection, over voltage protection, surge voltage protection upto 2 KVs, protection grade IP 20, CRI greater than 80%, bema angle of 120 clear, ITHD below or less than 15%, CW available CCT of 5700K, power factor of minimum 0.95, CRCA powder coated white after phosphochromate treatment housing, life span of minimum 50000 working hours including making electric connection from source with PVC sheathed copper conductor wire of 1.5 Sqmm x 3 core complete all as specified and directed by EIC.

S&F in repairs LED 9/10 Watt tube light fitting mirror intregated type, including LED retrofit tube lamp 9/10 W , LED tube light nominal power 9/10 Watt, L LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, , lumen efficacy of minimum 115 lumens per watt, , integrated electronic driver (SMP based constant current supply) with output short circuit protection and surge protection upto 2.5 KV, protection grade IP 20, CRI greater than 80%, bema angle of 120 clear, THD below or less than 20%, CW available CCT of 6500K, power factor of minimum 0.95 extruded aluminium LED battens life span of minimum 50000 working hours complete fitting including connecting with PVC insulated multistranded copper flexible cable 1.0 sqmm three core, and PVC round/ square box white colour x 2 Nos for mounting of fitting including taking down old unserviceable complete all as specified & directed. . Note : Make of batten and LED tube lamp should be of same make.

Supply and fixing in repair Surface Spotlight LED 7W 3000K/4000K with aluminum structure, available with adjustable light engine swivel type 240V AC Lumen efficiency 70lm/W complete all as specified and directed.

Fixing only LED Flood light fitting 70 Watt 230 V AC outdoor type complete all as specified and directed. Note : Flood light will be issued under Sch B free for fixing only.

S&F in repairs Post Top lantern LED type 36/40 watt 230volt outdoor type with decorative post top for 360degree indirect light IP 65 Protection with impact and corrosion resistant suitable for service bracket dia 40mm GI pipe complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.

S & F in repairs LED bollards light 9W/10w for pathways and garden with aluminium extrusion UV stabilised injection moulded opal polycarbonate diffuser for spotless lightening with IP65 including foundation protection.

Hanging only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan including Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and as directed. Note : Ceiling fan including blade, rod and canopy will be issued under Sch B free for hanging/fixing only

Fixing only in repairs exhaust fan (M.D. supply) with necessary bolts (6 inches long, 6 mm dia.) with nuts and washers for fixing the fan in wall including making necessary electric connection from ceiling rose to the fan with PVC insulated flexible cord copper of size 0.75 sqmm and removing fan and blades to store complete all as specified and as directed. Note : Exhaust fan including louvers will be issued under Sch B free for hanging/fixing only

Fixing only in repairs exhaust fan (M.D. supply) made of sturdy Engineering plastic with necessary bolts including making necessary electric connection from ceiling rose to the fan with PVC insulated flexible cord copper of size 0.75 sqmm and removing fan and blades to store complete all as specified and as directed. Note : Exhaust fan including louvers will be issued under Sch B free for hanging/fixing only

S&F in repairs VTPN distribution board with provision for 4 pole MCCB up to 160A as incomer with three phase and single phase (TP/SP) MCB outgoing with and including insulated busbar (tinned electrolytic copper) arrangement, shrouded neutral bar and earth bars, Top and bottom removable gland plates with knockouts, 6 way, Double door enclosure made up of CRCA sheet steel,powder coated, IP 43, IK 09 including fixing the DB box flush in wall of any type and making good the distrubed surface to match as the existing with all as specified and directed by Engr-in-charge

S & F in repairs sheet metal enclosure for MCB, DB, SPN, 240 Volts, 100 Amps rated busbar, Confirming to IS as per IEC 61439-3, 12 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 , IK 09 including fixing the DB box flush in wall of any type and making good the distrubed surface to match as the existing with all as specified and directed by Engr-in-charge.

S & F in repairs sheet metal enclosure for MCB, DB, SPN, 240 Volts, 100 Amps rated busbar, Confirming to IS as per IEC 61439-3, 8 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 30 , IK 08 including fixing the DB box flush in wall of any type and making good the distrubed surface to match as the existing with all as specified and directed by Engr-in-charge.

S & F in repairs sheet metal enclosure for MCB, DB, SPN, 240 Volts, 100 Amps rated busbar, Confirming to IS as per IEC 61439-3, 4 way single door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 30 , IK 08 including fixing the DB box flush in wall of any type and making good the distrubed surface to match as the existing with all as specified and directed by Engr-in-charge.

Supply and fixing in repairs MCCB 4 Pole 100 Amps Breaking Capacity 16KA ,415V to be housed in DBs complete including necessry connection all as specified and directed engr-in-charge

Supply and fixed in MCB TPN 40 to 100 Amps, 'C' Curve 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and directed engr-in-charge.

Supply and fixed MCB SPN 32 Amps, 'C' curve 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed engr-in-charge.

Supply and fixed MCB SP 6-32 Amps, 'C' curve 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed engr-in-charge.

Supply and fixing in repair of 20A starter switch for AC including necessary connection all as specified and directed engr-in-charge.

Supply & Fixing in replacement of "Modular AC Box With 20A SP MCB, Plastic Enclosure & Unbreakable Heavy Duty With ISI Plug Top", complete all as specified and directed.

Material and labour for earthing complete with Galvanised steel earth plate electrode 600x600x6 mm mm buried directly in ground (Earth pit not less than 2.25m below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to GI wire 4 mm as earth lead by means of bolt, nuts, check nuts and washers of galvanised iron or steel, upto 7.5m length, earth strip protected by and including 15 mm dia GI pipe (Md. grade) and connected to main test point or body of pole/pannel or lightening arrester of main controlling switch as directed including concrete pit in PCC (1:3:6) type C1 , Precast RCC (1:2:4) Type B1 cover slab of size 54x54x5 cm reinforced with 8 mm dia TMT bars @ 100 mm C/C both ways with one handle for lifting made out of 10 mm dia TMT bar embedded in precast cover slab, funnel, wire mesh, 20 mm bore GI Pipe (Medium Grade) for watering, Charcoal and salt in alternate layers of 15 cm (Compacted Thickness) around the earth electrode including necessary excavation, earth work in any type of soil and disposal of spoil to a distance n.exc 50 m and necessary testing complete all as shown in Electrical Plate No 3 of SSR Part-I. NOTE : 1. The unit rare includes for protectionh GI pipe of 15mm and watering pipe of 20mm bore including excavation for earth pit in any type of soil/disintegrate rock. 2. Contractor has to bring agriculture soil from outside of defence land and fill in earth pit to acheive desired result as the soil resisitivity is very high. 3. The cost of GI wire including protection pipe, from top of earth plate upto 7.5 meter above/below ground level is deemed to be included in the unit rate. 4. All the joints in GI wire and connectgion with earth plate to be welded through brazing and in addition by providing double brass nut bolt and washer. 5.Costing of welding and nut bolts are deemed to be included in the unit rate

Supply and fixed in repair D clamp of strip size 25x6 mm with suitable washer,nuts, bolts in any shape or size as indicated or directed including making hook for hanging ceiling fan and inclusive of one primer coat ,one under coat, one finish coat of paint complete for hanging of ceiling fan all as specified and as directed.

S & F in repair LED street/security lights nominal power 35/36 Watt, LED of Make Osram; Everlight; Philips; Nicha; Cree; Samsung, LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen efficacy of minimum 110 lumens per watt, built-in integrated electronic LED driver, output open /short circuit protection, phase to phase protection, over voltage protection, surge voltage protection upto 4 KVs, protection grade IP 66, CRI greater than 80%, CW available CCT of 5700K, power factor of minimum 0.95, pressure die-cast aluminium alloy housing with epoxy powder coated metallic silver finish after phosphochromate treatment, life span of minimum 50000 working hours including fixing at any height and including wiring using three core PVC insulated, PVC sheathed, flexible stranded copper conductor FR-LSH cables suitable for outdoor use, 1.5 sqmm as per IS 694: 2010 complete all as specified and as directed.

Supply & Fixing in replacement switch modular type 6 Amp one way, one module, single phase, complete all as specified and directed.

S&F in replacement socket outlet 5 Amps, 5 pin, modular type, 2 module , single phase complete all as specified and as directed engr-in-charge.

Supply & Fixing in replacement switch modular type 15/16 Amp one way, two module, single phase, complete all as specified and directed.

S&F in replacement socket outlet 15/16 Amps, 5 pin, modular type, 2 module , single phase complete all as specified and as directed engr-in-charge.

Supply & Fixing in replacement fan regulator modular step type 120 W 2 module suitable for 230 volt .cmplete all as specified and as directed engr-in-charge.

Supply and fixed in replacement switch piano flush type, single pole , 5/6 Amps, one way complete all as specified engr-in-charge.

Supply & Fixing in replacement socket outlets 2 in 1, 5/6 Amps, 230/240 V complete all as specified and as directed engr-in-charge.

Supply and fix in replacement switch socket combination 2 in 1 multipurpose (6 Amps ) flush type controlled by one switch complete all as specified engr-in-charge.

Supply and fixed in replacement switch socket combination 5 in 1 (5/16 Amps ) flush type controlled by one switch complete all as specified engr-in-charge.

Supply & fixed in replacement stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified engr-in-charge.

Supply and fixing in replacement of Decorative wall light, gold finish fixture with white glass diffuser suitable for 1 N x9 W LED Lamp/2 N x7.5 W LED filament lamp E27 base complete all as specifed and directed engr-in- charge.

Supply and fixing in replacement of Decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for Decorative wall light fixture 1 N x 9 W LED Lamp/1 N x 7.5 W LED filament lamp E27 base

M/S SEHGAL CONSTRUCTION (BID ID -3502548)

UNIQUE ENTERPRISE (BID ID -3502518)