Special Repair of (B-6) Residence in DC Colony at Kurukshetra in District Kurukshetra.

Amount

Removing doors and windows (wooden and steel) together with chokhats the dismantling of walls HSR(8.18) (a) doors

(b)Windows

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete: -door and window frame size 127 mm X 50 mm with 40 mm wide double rebate (HSR - 18.34)(c)

Factory manufactured wire gauze door and window shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash,etc.,(non-coniferous timber other teak, conforming to I.S.specification No.1003, kiln-seasoned),with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottom rail, and wire gauze of 140G or 120G designation including cost of iron hinges, crews,chocks / cleats, stops nail etc., complete fixed in position (excluding the cost of any fitings, other than specified above,but including labour for fixing the same in position)- (style and rails of windows shutter shall be 75 mm wide)35 mm thick (HSR - 17.92)(ii)

Supplying and fixing glass panes with moulding of commercial hard wood such as hollock, champ, chikrassy and chaplash etc.(Non coniferous timber other than teak, conforming to I.S. specification No.1003, kiln seasoned). 4 mm thick (glazing area above 55 sq dm, but upto 84 sq dm of each pane) (HSR - 17.36) (c)

Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete.(HSR-14.92 (b)

Providing and fixing vitrified tiles of size 600 x 600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles.Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS (HSR-14.89).

Pdg & fixing ceramic tiles/anti skid tiles of size 400mm x 400mm or above size of approved make in floors, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS. (HSR-14.91).

Providing & Fixing of wrought iron steel shed with Poly carbonated sheet having size 1.25mm thick (heat-resistance having life 10 years,p c lite make) NS

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.(HSR-16.3)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE EUROPEAN TYPE WATER CLOSET SUITE WITH CONCEALED ‘P’ or ’S’ TRAP with or without vent (as approved by the Engineer-in-Charge) and all other necessary fittings as fully described in item no.30.3 above.White (HSR - 30.6)(i)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (to the approval of the Engineer-in-charge) INDIAN TYPE WATER CLOSET SUITE CONSISTING OF:-Closet set VITREOUSCHINAWARE W.C.PAN WITH horizontal inlet, for sinking into floor with A PAIR OF FOOTRESTS, 100 MM H.C.I’P’ TRAP WITH or without vent a required and suitable joint for closet inlet;Size 580 mm White (HSR - 30.1)(i)(a)

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the engineer-in-charge).Bib cock long body (HSR - 30.75)(a)

Providing and fixing in position C.P. brass stop cocks (as approved by the Engineer- in-charge)15 MM STOP COCK Stop cock male and female end (HSR - 30.76)(a) (i)

Providing and fixing HDPE water storage tanks of Sintex, Diplast, O.K. make with covers/lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Engineer-in- Charge. (except civil work). 1000 ltr. capacity (HSR - 30.119)(e)

PROVIDING AND FIXINGIN POSITION GULLY TRAPS FIXED IN CEMENT CONCRETE 1:4:8 complete WITH H.C.I.GRATING 150 MM X 150 MM CAST IRON COVER WEIGHING APPROXIMATELY 7.26 K.G. AND FRAME CLEAR OPENING 300 MM x 300 MM and outside size 330 MM x 330 MM AND CHAMEBR INCLUDING cost of all brick work in CEMENT MORTAR 1:5 CEMENT CONCRETE 1:8:16 IN FOUNDATIONS, AND CEMENT CONCRETE 1:2:4 IN COPING around C.I. cover and frame etc. WITH THREE COATS of black bitumastic superior PAINT of approved manufacture on all C.I. work AS PER STANDARD DESIGN, minimum depth of water should be 150mm with a minimum seal 50mm.150 mm internal diameter H.C.I.gully trap (HSR - 30.114) (d)

Scraping White wash colour wash (HSR-8.32)a

Providing and two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get en even smooth finish including cost and carriage of all material , labour charges, scffolding , sundries etc. complted (JK/Birla Make) (HSR-16.81)

Distempering with washable oil bound Distemper (of approved manufacture) two coats over one priming coat on new work. (HSR-16.58)

Providing two coats of exterior acrylic emulsion paint. 1st quality (HSR-16.79) b

Painting two coats with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (HSR-16.5)

Note: In case of any difference in the unit & nomenclature of any of the HSR items depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable.

THe Sarfraz Ahmed 786 Coop Labour and Construction Society Ltd. Kurukshetra