COMPREHENSIVE MAINT AND PERIODICAL SERVICES TO OFFICERS JCO OR MD ACCN INCLUDING CERTAIN BR REPAIRS WORKS AT BEG AND CENTRE UNDER GE (CENTRAL) KHADKI

Amount

M & L for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of white (lime) wash on wall complete all as specified and as directed by Engr-in-Charge.

All as specified in item No 01 above but applying one coat of white (Lime) wash on ceiling.complete all as specified and as directed by Engr-in-Charge.

M & L for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of cement based paint (any tint) on walls complete all as specified and as directed by Engr-in-Charge. Note;- (i) filling of cracks,holes and dents are includes in the same rates (ii) Proper curing with water to be done before and after application of 1st coat.

M & L for preparing of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and as directed by Engr-in-Charge.

M & L for preparing of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg one coat of synthetic enamel paint any tint complete all as specified and as directed by Engr-in-Charge.

M & L for preparing plastered or unplastered old surfaces of walls and applying one coat of plastic emulsion complete all as specified and directed

M & L for preparing of old undecorated surfaces of walls and applying one coat of oil bound emulsion distemper(OBD) complete all as specified and as directed by Engr-in-Charge.

M & L for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of dry distemper (any tint) on walls complete all as specified and as directed by Engr-in-Charge.

M&L for Wall care putty of 3mm thick as in interior/ exterior on wall /ceiling surface of any description finished smooth and even surfaces complete all as specified and directed

Dismantling Wrought iron or mild steel work of any description and in any position complete all as specified and as directed by Engr-in-Charge.

S & F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-410 W(Gde E-250) quality B.complete all as specified and as directed by Engr-in-Charge.

S&F steel work in tubular trushes including special shaped washer etc complete using ERW or induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc as in purlins complete all as specified and as directed by Engr-in-Charge..

M & L preperation of new steel surfaces of any desciption over 10 cm in width or girth not other wise descibed and applying two coats of synthetic enamell paint over a coat of red oxide complete all as specified and as directed by Engr-in-Charge.

Dismantling of Plain or corrugated/galvalume steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engr-in-Charge.

S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed by Engr-in-Charge.

S& F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed by Engr-in-Charge.

S&F for 0.63 mm plain Galvanised, mild steel sheeting, in ridges, hips, valley Gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275. fixed with self tapping /coach screws as specified complete all as specified and as directed by Engr-in-Charge.

Dismantling of single layer Mangalore pattern or similar tiles in roof coverings complete all as specified and as directed by Engr-in-Charge.

S & F roof tiles, Mangalore pattern, inter locking at side joints laid dry complete all as specified and as directed by Engr-in-Charge.

All as per ser No 19 above except tiles complete all as specified and as directed by Engr-in-Charge.

S & F ridge or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM 1 : 6

Dismantling battens for tiles singles etc of any size including tiling fillets spaced exc 15 cm complete all as specified and as directed by Engr-in-Charge.

S&F second class hard wood clean sawn battens at 30 cm centre to centre and section area exceeding 15 and not exceeding 25 sqcm complete all as specified and as directed by Engr-in-Charge.

All as per item No 23 but except battens complete all as specified and as directed by Engr-in-Charge.

Taking down steel tubing and connection 15mm bore.

Taking down steel tubing and connection 20mm bore.

Refixing 15 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed by Engr-in-Charge.

Refixing 20 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)complete all as specified and as directed by Engr-in-Charge.

S&F tubes 15mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed by Engr-in-Charge.

S&F tubes 20 mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etccomplete all as specified and as directed by Engr-in-Charge.

Cutting chases, pinning & making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone/ concrete block walls complete all as specified and as directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (fibre,pulp insulation, Ac etc), any thickness including cover fillets complete all as specified and as directed by Engr-in-Charge.

S&F interlocking aluminium alloy anodised snap grid consists of main Tee runners of size 38mm x25mm x1.5mm spaced 1200mm centre to centre and cross Tee of size 25mmx25mmx 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mmx600mm and provide a secondary cross tee 25mm x1.4mm ( of length 600mm) to be interlocked of the centre of 1200mmx600mm panel to form a grid of 605mmx605mm and wall angle 25mmx25mmx 2mm. Aluminium alloy extruded section shall be aluminium anodised (minimum 15 micron ) and shall conform to IS 733, IS 1285 and IS 737. including Hangers of GI wire 6mm dia to be fixed by approved rawl plug, level and justers and screws etc.complete all as specified and as directed by Engr-in-Charge.

M&L for 6-9 mm thick Gypsum board/tiles for insulation and accoustic purposes, 60cmx60cm in size , fixed with nails to timber frame work or with staples on snap grid in ceiling.all as specified and as directed by Engr-in-Charge

Dismantling timber framed work scantlings 40 sq.cm and over in section, in any position.

All as per ser No 35 above but in fillets, rails, posts, rafters,purlins etc under 40 sq. cm in section complete all as specified and as directed by Engr-in-Charge.

S&F for 2nd class soft wood timber framed and fixed clean sawn in scantlingcomplete all as specified and as directed by Engr-in-Charge.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth complete all as specified and as directed by Engr-in-Charge.

Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for

S&F for Providing precast cement concrete louvres and jallies, 35 mm thick (measured solid), including all mouldings using cement concrete type B0 1:2:4 (12.50 mm graded aggregate) set in cement mortar 1:4 complete.

Preparing new plastered surfaces on walls /jallies applying three coat of white wash(lime wash) complete.. all as specified and as directed by Engr-in-Charge

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortor to dwarf wall ot cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x330x160mm. all as specified and as directed by Engr-in-Charge

Demolition of stone slabs/flooring of any description laid bedded and pointed any mortar and all as specified and as directed by Engr-in-Charge

M & L for Granite slab machine cut for 20 mm thick bedded and jointed with colour cement to match cut to shape required complete all as specified and as directed by Engr-in-Charge.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including M&L for screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed by Engr-in-Charge.

All as per ser No 45 but on step riser skirting over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed by Engr-in-Charge.

M&L for Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match including 15 mm thick screed bed in cement mortar (1:6) complete.

All as per ser No 47 but on step riser skirting over and including 10mm thick rendering in CM (1:4) complete.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations.

Dismantling of floor hearth or wall tiling including cm bedding (but not backing) removing serviceable tiles in store rubbish of the premises all as specified and as directed by Engr-in-Charge.

M&L for vitrified ceramic tiles 8-9 mm thick light shade, (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) all as specified and as directed by Engr-in-Charge

M&L for Vitrified coloured tiles in vertical/skirting surface 8-9 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat all as specified and as directed by Engr-in-Charge

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar complete. all as specified and as directed by Engr-in-Charge

M&L for Glazed ceramic colour tiles in vertifical surface 350X250X7 mm / 450 x 350 x 7mm / 300 x450x7 mm / mm thick with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering as back coating in cement mortar 1:4 complete all as specified and as directed.

M&L for 25 mm thick Cement concrete in level course for receiving floor tiles using Type B1,1:2:4 (20 mm graded aggregate) complete.

S & F in repairs Aluminium body, door closer hydraulically regulated designation N0. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

M&L for RAK Ceramic or equivalent tile slab 14-16 mm thick (table rubbed and polished ) as in jambs, pillars, window- cills, cooking platform, and like with necessary chemical fix on the existing surface including pointing with white cement (1:2) with admixture pigment to match with shade of slab rubbing, polishing and rounding to edges including demolition of existing cill/cooking platform, pillar jambs complete all as specified and directed.

Demolition of precast concrete block /brick work walling built in cement mortar

Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc all as specified and directed

M&L for Precast cement concrete block masonry using type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar1:6 complete

M&L for rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement plaster 1:4 and rendering is to be finished even and smooth (without using extra cement) complete

M & L for rendering 15mm thick on fair faces brick work /PCC block masonary or concrete surface of wall using cement plaster 1:6 and finished even and smooth (without using extra cement) complete

M & L preparation of newly plastered surface and applying two coat of oil bound Distember over a coat of primer on wall etc complete all as specified and directed

S&F in repairs Health faucet,ABS body with 1 meter SS braided connection pipe ,all as per makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed.Make-ESSCO

S&F in repairs Soap dish,any type,fixed to plugs with chromium plated, brass screws complete all as per makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed.

S&F in repairs Wall mixer, three in one, with arrangement for both telephonic hand shower and overhead shower with bend pipe with complete accessories all as per Cat Part No QT F2006403 or equivalent makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed by Engr-in-charge.

S & F in repair Towel Rack 24'' glossy finish complete all as per cera Cat No F5015101 CH or equivalent make as specified in PS all as specified and directed. all as specified and directed

Disconnecting existing tanks n.exc.2000 litre capacity,including removal of settled sludge,setting aside (or lowering if required) for repairs,cleaning ,etc and hoisting if required,reconnecting and refixing in position as in same position complete all as specified and as directed.

S&F in repair provision of Ball PVC valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20 mm dia of the pipe all as specified and as directed by Engr-in-Charge

S&F in repair provision of Ball PVC valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 25 mm dia of the pipe all as specified and as directed by Engr-in-Charge

S&F in repair provision of Ball PVC valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 15 mm dia of the pipe

S&F in repairs Stainless steel fancy type curain rod 25 mm including SS brackets, decorative knobs,and including all necessary fittings such as rawl plug screws complete all as specified and directed.

Taking down Chowkats or frames with shutters without taking of shutters from the frames exc 1.5 Sqm but not exc 4 Sqm each all as specified and as directed by Engr-in-Charge

Taking down Chowkats or frames with shutters without taking of shutters from the frames not.exc 1.5 Sqm each complete all as specified and as directed by Engr-in-charge.

Taking down shutter exc. 1.00 Sqm but n.exc. 2.00 Sqm each and removing from site complete all as directed by Engineer-in-Charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling & fixing in opening as spd and directed by the Engineer in charge.

S&F Factory made solid PVC Moulded door shutter 28 to 30 mm thick(stiles) with 2,4,or 6 raised panel desilgn with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in ferame at site with wood free EPS complete all as specified and as directed by Engr-in-Charge.

S&F factory made shutter 35mm thick, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engr-in-charge.

S & F 35mm thick 2nd class HW glazed or skeleton shutter open rebated divided into square with plainchamfered or rounded mitred and rebated without sash bar and prepared to receive gauze or glaze, size of members as clause 8.20 (a) of SSR pt-1 complete all as specified and as directed by Engr-in-charge.

S&F 30mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-charge.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth complete all as specified and as directed by Engr-in-Charge..

Stainless steel 100 mm size butt hinges, medium weight complete all as specified and as directed by Engr-in-Charge.

Aluminium handles 150 mm long, cast type anodised complete all as specified and as directed.

Aluminium anodised barrel tower bolt 200mm long complete all as specified and as directed.

S&F for stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long

S&F for Bib taps 15mm dia, cast copper alloy chromium plated, with CP flange all as per makes specified in PS fixed in repairs complete all as specified and as directed.Make ESSCO/SHAKTI.

S&F for Bib taps 15mm dia, cast copper alloy chromium plated, long body, with CP flange all as per makes specified in PS fixed in repairs complete all as specified and as directed.Make ESSCO/SHAKTI.

S&F for 2-Way Bib taps 15mm dia with single knob and wall flange all as per makes specified in PS fixed in repairs complete all as specified and as directed.MAKE ESSCO/SHAKTI.

S&F for Stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle,15mm bore size screwed both ends for iron pipe or for unions and fittings fixed in repairs complete all as specified and as directed by Engr-in-Charge.

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W(Gde- E-250) quality-A complete all as specified and as directed by Engr in charge.

S&F in repair Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing withplain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M&L for preparation of new Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coat of aluminium paint complete all as directed.

S&F for Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe,all as per CERA Cat No. 3010109 or techno commercially equivalent makes specified in PS. complete including making good to floor fixed in repairs complete all as specified and directed.

S&F for Brass chromium plated overhead shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union CERA Cat No F7020307 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

S&F for Gun metal gate or globe valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F for Vitreous China wash down water closet pan (EWC) white (excluding fixing bolts, flushing cistern and flush pipe) all as per CERA Cat No S1053102 or techno commercially equivalent makes specified in PS fixed as in repairs, complete all as specified and as directed by Engr-in-charge.

S&F in repair for Vitreous China bowl urinal flate back size 330x250x445 mm wall mounted (minimum), (excluding flushing cistern, flush pipe and waste pipe) including fitting of push cock with exting GI Tubing fixed in repairs all as per Cat No S4020112 complete all as specified and as directed by Engr-in-charge.

S&F in repair CP Waste coupling for vitreous china bowl urinal flate back complete all as specified and as directed.

S&F for Plastic water closet seat cover, coloured, for pedestal pan closed pattern with flat bottom,and cover with mild steel chromimium plated or aluminised hinging device complete fixed in repairs all as specified and directed.

S&F for PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per CERA COVAN Cat No. B1010110 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

S&F for Vitreous china wash basin white flat back size 550x400 mm excluding taps and PVC waste pipe 610 mm long and brackets all as per CERA Cat No S 2040119SN or techno commercially equivalent makes specified in PS complete fixed in repairs all as specified and directed.

S&F in repair CP Waste coupling for Vitreous china wash basin white flat back complete all as specified and as directed.

S&F in repair Waste pipe for Vitreous china wash basin white flat back complete all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nut of length 450 mm fixed in repairs all as directed.

S& F for15 mm bore Pillar taps, cast copper alloy fancy type, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as per Prayag Cat No 9302 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with tinned tack of stainless steel wire staple or wooden beads as in door, windows/ventilators etc complete all as specified and as directed by Engr-in-Charge.

S&F in repair bevelled edges looking mirror of size 300x450mm or as per requirement consisting of 5-6mm thick fixed on wall /tile surfaces including necessary fittings complete all as specified and as directed by Engr-in-Charge

S&Ffor PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement. complete all as specified and as directed.

S&F in repairs Tubular towel rail, 20mm dia, 60 cm long complete all as specified and as directed by Engr-in-charge.

S&F for powder coated aluminium sliding windows having three Nos of tracks including one wire glazed shutters for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos glass shutters including 4mm thick coloured glass and aluminium section weight n.less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete all as specified and as directed by Engr-in-charge.

S&Ffor Aluminium louvered ventilators made out of section size 80mm x 20mm x 1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc making to the jambs, incl taking down existing RCC louvers/Jali complete all as specified and as directed by Engineer-in-Charge. Note : Colour of powder coating- wooden Colour, Brown colour, White colour as directed by Engr-in- charge.

M&L for 75mm bore PVC(SWR) pipe, type 'B' single socketed in any length with rubber ring joints laid in trenches or floors fixed in repairs all as specified and as directed.

M&L for 110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings fixed in repairs complete all as specified and as directed.

S&Ffor PVC (SWR) bends type 'B' of any radius, 75 mm dia complete all as specified and directed.

S&Ffor PVC (SWR) bends type 'B' of any radius, 110 mm dia complete all as specified and directed.

S&Ffor 75 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed.

S&Ffor 110 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed.

S&Ffor 110mm bore PVC (SWR) WC connector type 'B' any type fixed in repairs complete all as specified and as directed.

S&Ffor PVC (SWR) gully trap 125/110mm setting and jointing in solvent cement complete all as specified and as directed.

S&Ffor100 mm bore Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) PVC (SWR) fixed in repairs complete all as specified and as directed by Engr-in-charge.

Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15cm thickness below or above ground level all as specified.

M&L for plain cement concrete type D-2 (1:4:8)(using 40mm graded stone aggregate)as in subbase complete all as specified and as directed.

M&L for 100 mm thick, PCC (1:4:8) type B-2 using 40 mm graded stone aggregates as in hardstanding complete all as specified and as directed by Engr-in-charge.

M&L for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in paving/ plinth protection laid in panels with necessary form work, finished rough surfaces of concrete including provision of construction joints complete all as specified and as directed.

S&F for ready made pulley operated clothes drying system of 8ft including 4 Nos of anodized Aluminium pipes of 2.70 RM long each each of outer dia 22mm and inner dia 19.8mm channel assembly . Pulleys made up of Delrin with rope guide mounted on channel pair of length 24"(distance between two pipes is adjustable). Locking system to hide rope knot. Channel to be mounted or fixed with self taping screws provided in kit. Rope will be polyster braided undyed of 4mm dia.

Dismantling of precast Chequered tiles laid dry of any description thickness & size complete all as specified and as directed.

M&L for 75 mm thick, PCC (1:4:8) type B-2 using 40 mm graded stone aggregates as in sub base complete all as specified.

M&L for coloured glossy finish chequered cement concrete tiles of size 30 cm x 30 cm x25 mm thick with grey cement and pigments , set jointed and pointed in neat cement slurry in floors incl screed bed or bedding layer of mortar 15mm thick average thickness for laying floor finishes in cement mortar 1:6 complete all as specified and directed.

water proofing treatment to Sunken floor are as under:- (a) Cleaning the surface of any description with wire brush,detecting sources of leakages/seepages and removing/taking down unsound treatment surface (b)M&L for making holes with drill machine of dia 14mm for carrying out non destructive waterproofing treatment to floors,sunken portion of toilet/Bathroom and junctions of floor and walls of bath/WC and floor traps (combined unit)by using consrtuction chemical method as hydrophobic PU grouting with first course of injection MDI based PU foam and second course of injection with PU plain all as per manufacturers instruction etc and M&L for fixing the metallic packer for hydrofobic PU foam sealer as per manfacturer specification. NOTE:- (a)The PU foam and PU plain shall have 100% solid sand solvent free and shall expand 30-40times its volume at liquid stage in presence of water,the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50D. (b)Shall have minimum 100CPS viscosity and shore hardness minimum 50D. MAKE:-PIDILITE or equivalent.

S&F in repair two way angle cock with flange cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

M&L for roller blinds fixed in repairs made out of polyester fabric with roller on top with plastic pully and lock as per design and type as approved by Engr-in-Charge complete all as specified and as directed.

VP DEVELOPERS AND CONTRACTOR (BID ID -3037974)

M/S K.D.MATE (BID ID -3045560)

MAHESH DADAJI BACHHAV (BID ID -3044566)

S M MISHRA (BID ID -3038705)

S.R.M.K Enterprises (BID ID -3038825)

Shri Sant Cosntruction (BID ID -3042239)