Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹1.9 L−₹50,167 (20.5%)Rejected-AOC | L2 | Rejected-AOC BEING NOT L1 | |
| 3 | L3₹2.5 L+₹7,263 (2.96%)Rejected-AOC | L3 | Rejected-AOC BEING NOT L1 | |
| 4 | L4₹2.7 L+₹25,079.91 (10.2%)Rejected-AOC E2B BHARAT SMALL INDSUTRIAL ESTATE BH GUJARAT OFFSET VATVA STATION ROAD VATVA VATVA AHMEDABAD GUJARAT 382440 | 382440 | L4 | Rejected-AOC BEING NOT L1 | |
| 5 | L5₹3.1 L+₹66,733 (27.2%)Rejected-AOC LIBRA ENGINEERING WORKS 16 B ARCHNA INDUSTRIAL ESTATE OPP AJIT MILLS RAKHIAL AHMEDABAD GUJARAT 380023 | AHMADABAD | GUJARAT | 380023 | L5 | Rejected-AOC BEING NOT L1 |
Tender Value
Refer Docs
Closing Date
18 Aug 2020, 5:00 pmClosed
H.K. MEENA
Room No. 52, Ground Floor, Administrative Building, Purchase Department, RCF LTD, Chembur Mumbai. 74
SUPPLY OF GATE VALVES AT RCF TROMBAY UNIT.
2020_RCFL_575382_1
E230200407
Open Tender
Machinery and Machining Tools
Supply
30 days
RCF TROMBAY
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
Exempted
10 Jul 2021
4 Aug 2020
19 Aug 2020
4 Aug 2020
18 Aug 2020
4 Aug 2020
NON RETURN VALVE (SWING CHECK VALVE) AS PER THE FOLLOWING TECHNICAL SPECIFICATIONS: A) SPECIFICATION : 1) SIZE <(>&<)> RATING : Ø16'' X 150# 2) TYPE : : SWING CHECK VALVE 3) END CONNECTIONS : FLANGED 4) COVER : BOLTED B) MATERIAL OF CONSTRUCTION: 1) BODY AND COVER : ASTM A 216 WCB, 2) DISC: A216 WCB+13% CR FACING 3) BODY SEAT RING : ASTM A 216 WCB + HARD FACED WITH STELLITE #6 4) HINGE PIN: ASTM A 276 410 5) HINGE BRACKET: ASTM A 216WCB 6) SEAT RINGS: ASTM A 216WCB 7) DISC NUT / WASHER: CS 8) GASKET: SS 304+GRAPH 9) COVER STUD/ BOLTS: ASTM A193 B7 10)NUTS: ASTM A 194 2H C) COMPLIANCE STANDARD 1) DESIGN : AS PER BS 1868 2) PRESSURE <(>&<)> TEMPERATURE RATING: AS PER ASME B 16.34 3) TESTING : AS PER API 598/BS 5146, 4) FACE TO FACE <(>&<)> END TO END DIMENSIONS : AS PER ASME B 16.10 5) END FLANGE DIMENSIONS : AS PER ASME B 16.5 NOTE: 1) VENDOR TO SUBMIT DETAIL CROSS SECTIONAL DRAWING OF VALVE WITH BILL OF MATERIAL ALONG WITH QUOTATION.2) VENDOR SHALL HYDROTEST VALVE AS PER STANDARDS <(>&<)> SUBMIT DOCUMENTARY EVIDENCE OF THE SAME ALONG WITH SUPPLY. 3) VENDOR SHALL SUBMIT MTC OF VALVES FROM REPUTED METALLURGICAL LABORATORY ALONG WITH SUPPLY.
GATE VALVE WITH BOLTED BONNET, OUTSIDE SCREW <(>&<)> INTEGRAL YOKE; SIZE : 16" X 150#; ENDS : FLANGED (RAISED FACE SERRATED) MATERIAL OF CONSTRUCTION- 1) BODY : A216 GR WCB. 2) BONNET : A216 GR WCB. 3) STEM : A479-410-2 4) SEAT RING : A105 + HARDFACED WITH STELLITE #6 (API TRIM#5) 5) DISC / WEDGE : ASTM A 216 GR WCB + HARDFACED 13 % CR STEEL (API TRIM #5). 6) YOKE SLEEVE (BUSH) : BRONZE 7) GLAND / GLAND BUSH : A105. 8) GLAND PACKING- GRAPHITED PTFE BRAIDED FIBRE PACKING. 9) BONNET AND GLAND STUDS WITH NUTS- ASTM A193 GR.B7 / ASTM A194 GR. 2H. 10) GLAND BOLTS / EYE BOTLS <(>&<)> NUTS : ASTM A193 GR.B7 / ASTM A194 GR. 2H. 11) OPERATION : GEAR OPERATED COMPLIANCE STANDARDS : 1) DESIGN STANDARD : API 600 2) FACE TO FACE DIMENSIONS : AS PER ANSI B16.10 3) FLANGE DRILLING : AS PER ANSI B16.5 4) PRESSURE <(>&<)> TEMPERATURE RATING : AS PER ANSI B 16.34 5) INSPECTION <(>&<)> TESTING : AS PER API 598 NOTE : 1) HYDROSTATIC TEST CERTIFICATE (AS PER API 598) TO BE FURNISHED ALONG WITH THE SUPPLY. 2) VALVES TO BE SUPPLIED DULY PAINTED BY ALUMINIUM PAINT OF MIN.40 MICRON DFT * PACKED WITH PROPER FLANGE CAP PROTECTOR.
GATE VALVE WITH BOLTED BONNET, OUTSIDE SCREW <(>&<)> INTEGRAL YOKE; SIZE: 10" NB X 150#; ENDS: FLANGED (RAISED FACE SERRATED) MOC: (1) BODY <(>&<)> BONNET: ASTM A 216 GR WCB, (2) STEM: ASTM A182 GR. F6a, (3) SEAT RING: ASTM A 105 + HARDFACED WITH STELLITE #6 (API TRIM #5), (4) DISC / WEDGE : ASTM A 216 GR WCB + HARDFACED 13% CR STEEL(API TRIM #5), (5) BONNET GASKET: SPIRALLY-WOUND SS 304 WITH GRAPHITE FILLER, (6) YOKE SLEEVE(BUSH): BRONZE (7) GLAND <(>&<)> GLAND BUSH: ASTM A 105. (8) STEM PACKING: GRAPHITE WITH BRAIDED END RINGS, (9) BACK SEAT: HARDFACED 13% CR STEEL (API TRIM #5), (10) BONNET BOLTS <(>&<)> NUTS: ASTM A 193 GR B7 <(>&<)> ASTM A 194 GR 2H, (11) GLAND BOLTS / EYE BOLTS <(>&<)> NUTS: ASTM A 193 GR B7 <(>&<)> ASTM A 194 GR 2H; (12) HAND WHEEL : DUCTILE IRON. COMPLIANCE STANDARDS: DESIGN STANDARD: API 600; FACE TO FACE DIMENSIONS: AS PER ANSI B16.10; FLANGE DRILLING: AS PER ANSI B 16.5; PRESSURE <(>&<)> TEMPERATURE RATING: AS PER ANSI B 16.34; INSPECTION AND TESTING AS PER API 598; NOTE: 1. HYDROSTATIC TEST CERTIFICATE (AS PER API 598) TO BE FURNISHED ALONGWITH SUPPLY. 2. VALVES TO BE SUPPLIED DULY PAINTED BY AL. PAINT OF MIN. 40 MICRON DFT <(>&<)> PACKED WITH PROPER FLANGE CAP PROTECTOR.
GATE VALVE WITH BOLTED BONNET, OUTSIDE SCREW <(>&<)> INTEGRAL YOKE; SIZE: 12" NB X 150#; ENDS: FLANGED (RAISED FACE SERRATED) MOC: (1) BODY <(>&<)> BONNET: ASTM A 216 GR WCB, (2) STEM: ASTM A182 GR. F6a, (3) SEAT RING: ASTM A 105 + HARDFACED WITH STELLITE #6 (API TRIM #5), (4) DISC / WEDGE : ASTM A 216 GR WCB + HARDFACED 13% CR STEEL(API TRIM #5), (5) BONNET GASKET: SPIRALLY-WOUND SS 304 WITH GRAPHITE FILLER, (6) YOKE SLEEVE(BUSH): BRONZE (7) GLAND <(>&<)> GLAND BUSH: ASTM A 105. (8) STEM PACKING: GRAPHITE WITH BRAIDED END RINGS, (9) BACK SEAT: HARDFACED 13% CR STEEL (API TRIM #5), (10) BONNET BOLTS <(>&<)> NUTS: ASTM A 193 GR B7 <(>&<)> ASTM A 194 GR 2H, (11) GLAND BOLTS / EYE BOLTS <(>&<)> NUTS: ASTM A 193 GR B7 <(>&<)> ASTM A 194 GR 2H; (12) HAND WHEEL : DUCTILE IRON. COMPLIANCE STANDARDS: DESIGN STANDARD: API 600; FACE TO FACE DIMENSIONS: AS PER ANSI B16.10; FLANGE DRILLING: AS PER ANSI B 16.5; PRESSURE <(>&<)> TEMPERATURE RATING: AS PER ANSI B 16.34; INSPECTION AND TESTING AS PER API 598; NOTE: 1. HYDROSTATIC TEST CERTIFICATE (AS PER API 598) TO BE FURNISHED ALONGWITH SUPPLY. 2. VALVES TO BE SUPPLIED DULY PAINTED BY AL. PAINT OF MIN. 40 MICRON DFT <(>&<)> PACKED WITH PROPER FLANGE CAP PROTECTOR.
GATE VALVE WITH BOLTED BONNET, OUTSIDE SCREW & YOKE; SIZE: 8" NB X 150#; ENDS: FLANGED (RAISED FACE SERRATED) MOC: (1) BODY & BONNET: ASTM A 216 GR WCB, (2) STEM: ASTM A182 GR. F6a, (3) SEAT RING: ASTM A 105 + HARDFACED WITH STELLITE #6 (API TRIM #5), (4) DISC / WEDGE : ASTM A 216 GR WCB + HARDFACED 13% CR STEEL (API TRIM #5), (5) BONNET GASKET:SPIRALLY-WOUND SS 304 WITH GRAPHITE FILLER, (6) YOKE SLEEVE: ASTM A439 TYPE D2 (7) GLAND & GLAND BUSH: ASTM A 105. (8) STEM PACKING: GRAPHITE WITH BRAIDED END RINGS, (9) BACK SEAT: HARDFACED 13% CR STEEL (API TRIM#5), (10) BONNET BOLTS & NUTS: ASTM A 193 GR B7 & ASTM A 194 GR 2H, (11)GLAND BOLTS / EYE BOLTS & NUTS: ASTM A 193 GR B7 & ASTM A 194 GR 2H; (12) HAND WHEEL : DUCTILE IRON. COMPLIANCE STANDARDS: DESIGN STANDARD: API 600; FACE TO FACE DIMENSIONS: AS PER ANSI B16.10; FLANGE DRILLING: AS PER ANSI B 16.5; PRESSURE & TEMPERATURE RATING: AS PER ANSI B 16.34; INSPECTION AND TESTING AS PER API 598. NOTE: 1. HYDROSTATIC TEST CERTIFICATE (AS PER API 598) TO BE FURNISHED ALONGWITH SUPPLY. 2. VALVES TO BE SUPPLIED DULY PAINTED BY AL. PAINT OF MIN. 40 MICRON DFT & PACKED WITH PROPER FLANGE CAP PROTECTOR.
Simex Pneumatics
J R INDUSTRIES
TRAIT VALVE MANUFACTURING COMPANY
LIBRA ENGINEERING WORKS
XSIS VALVES PVT LTD
Sap Indutries Ltd.
DINTECH VALVES PVT. LTD.
AB INDUSTRIES
VALMAX ENGINEEERING CORPORATION
SEALMECH VALVES
ZED VALVES CO. PVT.LTD.
J G VALVES AND FITTINGS I PVT LTD
JETFLO ENGINEERS
METROPOLITAN INDUSTRIES
Novel Valves India Pvt. Ltd.
JRS CONTROLS
NUTECH CONTROLS
HI-TECH BUTTERFLY VALVES I PVT LTD
PIPINGZONE
Sonali Udyog
JAYANT ENGINEERING AND MARKETING PVT. LTD.
HI TEC VALVES
Emrise Engineering Private Limited
G M Engineering Pvt Ltd
A.V.VALVES LTD
HTC VALVES PRIVATE LIMITED
stage.html
html • 0.12 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_604127.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .