Construction of Store Room in NHM Office in Civil Hospital, Hisar

Amount

Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres. (HSR 6.6)

Cement concrete 1 : 8 : 16 with stone aggregate 40 mm Nominal size in foundation and plinth. (HSR 10.28)

Damp proof course 40 mm thick of cement concrete 1:2:4 using stone aggregate 20 mm nominal size with 2 coats of bitumen 20/30 penetration, at 1.65 kg per sqm laid hot and sanded.(HSR 10.114)

First class brick work laid in cement sand mortar 1:6 in foundation and plinth. (HSR 11.2)

First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. (HSR 11.7)

Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling.(HSR 14.1)

Conglomerate floor 25 mm thick cement concrete topping 1:2:4 (HSR 14.8)

Providing and fixing vitrified tiles of size 600 x 600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS. (HSR 14.89)

12 mm thick cement plaster 1:6 (HSR 15.7)

15 mm thick cement plaster 1:4 on the rough side of single or half brick wall (HSR 15.12)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (HSR 16.3)

Preparation of plastered or concrete surfaces for painting, including sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing surface to the required finish, complete.(HSR 16.24)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces. (HSR 16.25)

Painting two coats with plastic emulsion paint on walls on new work to give an even shade. (HSR 16.30)

Providing two coats of exterior acrylic emulsion paint. b) Ist quality (HSR 16.79 b)

Providing and laying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including coat and carriage of all material, labour charges, scaffolding, sundries etc. complete (J.K./Birla make) (HSR 16.81)

Factory manufacture solid flush door and Shutters, with block board core as per I.S. No. 1659-1969 bonded with water poof type phenol formal dehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in positon includeing iron hinges, screws, chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)-commercial veneering with vertical grains or corss bands and face veneer on both sides commercial facing with laminated core and lipped edges(HSR 17.93a iii) 35mm thick

Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12)

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified sections, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, concrete 1:3:6 for filling in the frame and cement concrete 1:3:6 for lugs complete (HSR 18.34) 76mm x 38mm x 35mm

Provinding and fixing of 0.5mm thick colour coated Profile Sheet complete in all respect (NS item)

Brijmohan Sharma Contractor

AKESHY KUMAR

Mahabir Contractor