Interior Works for Showroom and Interpretation Centre BKSM New Delhi

Amount

CIVIL WORKS

(a) Dismantling of all 115mm/ 230mm thk. Non-structural brick walls in cement mortar including door lintels, tiles/ stone cladding, cement plaster and disposal of unserviceable material as directed to municipal dumping ground (b) Dismantling of existing all gypsum board false ceiling with GI frame etc. including stacking of serviceable material and disposal of unserviceable material as directed to municipal dumping ground (c) Dismantling of existing all glass/ wood/ aluminium partitions etc. and disposal of unserviceable material as directed to municipal dumping ground (d) Dismantling of existing Aluminium/ Glass/ Flush doors with frame and stacking of serviceable material and disposal of unserviceable material as directed to municipal dumping ground (e)Dismantling of existing floor/ wall tiles including existing PCC and removal of cement mortar and disposal of unserviceable material as directed to municipal dumping ground (f)Disposal of existing demolition debris and unserviceable material as directed to municipal dumping ground

P / L 50mm average thickness Plain Cement Concrete 1:2:4 (1 cement : 2 coarse sand : 4 aggregate, 20mm and down gauge) , tamped, spaded, trowelled and smooth finish. (Levelling Course & Counters etc.)

P / L 15mm to 20mm thk. cement concrete flooring (Indian Patent Stone) 1:2:4 (1 cement : 2 coarse sand : 4 aggregate, 10mm and down gauge) , tamped, spaded, trowelled and top finished neat and smooth with a floating coat of cement or finished to non-skid top surface as directed, laid in alternate panels of area not more than 2.00 Sqm. and laid to level or proper slope as directed with necessary shuttering of panels, providing Glass strips, curing etc., complete at all levels as per design

P / L M20 grade reinforced cement concrete in counter/ lintels, in pantry/ toilet, including the cost of shuttering and steel reinforcement, binding wire complete in all respects as per design

P / L Half brick (115mm thick) partition walls with light weight aerated foam concrete blocks, good quality approved bricks in cement mortar 1:4 (1cement : 4 coarse sand) including 2 nos. of 6mm dia. M.S. round bars at every IVth course, including scaffolding, curing, rubbing the surface, racking out the joints etc., complete as directed and specified for walls, platform supports etc. at all levels as per design

P / A Water-proofing treatment to Washroom & Pantry area surfaces exposed to damp / drainage / direct rainfall etc., 3mm thk. Membrane type waterproofing (Dr Fixit/ STP make) till 300mm height on wall/ column vertical surfaces, including minimum 24 hours water pond test & doing layer of protective plaster on top of waterproofing membrane surface

P / A Tapecrete (CICO make P 151) Water-proofing treatment to raw RCC slab surface, applied as per manufacturer guidelines, as per site/as directed

Providing & Filling all sunken/ raised areas, with light weight aerated foam concrete blocks with density not increasing 400kg/cum etc. complete at all levels as per detail

Providing Pest Control & Anti-Termite treatment of entire site (only after complete dismantling & before start of site works) with warranty for atleast 5 years (site plan area to be measured for rates)

P / A 12-15mm thick plaster in cement mortar 1:4 to all types of RCC / brick work (small or big) surfaces including , wall tops, jambs and cills etc. in line level and plumb, including smooth cement finish, including providing necessary grooves.

P / F 35 kVA Silent Generator footing, 200mm thk. 1:2:4 RCC with 12mm diameter tor steel grid in 300mm in both axes, as per detail

Glazing

P / F Store Front Glazing, Matte melamine polished 170x50mm section size fully seasoned Ivory Teakwood framework with 10mm thk. Toughened glass anchored to floor & false ceiling, as per detail

P / F Cabin Framed Glazing, Matte melamine polished 100x50mm section size fully seasoned Ivory Teakwood framework with 10mm thk. Toughened glass anchored to floor & false ceiling, as per detail

Metal Works

P / F MS Fabrication (NON STRUCTURAL WORK ONLY) for support structures & various framework/ catwalk supports etc. with MS Hot rolled tubes/ ISMC/ ISMB/ ISA sections etc., rate to include fabrication, grinding & applying 2 or more coats of red oxide primer & enamel paint as per approved shade & make, as per manufacturer specifications, as per design

Wall Treatments (Plaster, Painting & Polishing)

P / A 8-12mm thk. plaster of paris (super fine quality) punning/ plaster on walls, columns etc., including scraping & hacking the existing finished surfaces and applying plaster of paris, making in proper grooves, line and levels/ plumb

P / A Fire retardant Paint of NAVAIR make FLAME PROOF ENAMEL PAINT FIRERETAR–FR–881, on all teakwood/ secondary hardwood framework or as mentioned by site engineer/ architect, applied as per manufacturer's specifications

P / A 3 or more coats of Asian Paints make acrylic emulsion paint, Cotton Wool L-104 Royale finish, Roller finish, to all walls, ceiling / plastered surfaces, applied evenly to produce uniform even surface to approved finish as per design, applied as per manufacturer's specifications

P / A Asian Paints make Texture Paint Royale Play Drizzle Top coat Pallid Bloom M318, applied as per manufacturer's specifications

P / A 2 or more coats of enamel paint of approved make as per manufacturer's specifications

P / A Apex Ultima make Outdoor Paint Sisal Matt 7890, applied as per manufacturer's specifications

S / I Wallpaper on wall/ partition, Nilaya make Pattern Book Colour Library II Crème colour W077D4NOY75, installed on smooth POP wall/ Partition, installed as per manufacturer's specifications

Ceiling Elements

P / F 20mm average thk. POP false ceiling, including providing and fixing G.I. angle of 25x25x0.55mm thick along perimeter of the ceiling, fixed to brick wall/ partition with the help of Nylon sleeves and screws at 610mm c/c. The main section of size 25x40x0.8mm thk fixed with the help of a level adjuster made of zinc alloy 50x25 mm as per drawings from the soffit of slab at 1220mm c/c with MS Flat 25x3mm thk fixed to soffit with G.I. cleat and dash fasteners. Ceiling section of 0.56 thickness having knurled web of 40 mm and 2 equal flanges of 35 mm with lips of 8.5mm are then fixed to the main section with the help of connection clips/ screws & in the direction perpendicular to the main section at 375 mm c/c, including taping, rate to include all pelmets / coves etc. as per design (flat plan area to be measured for rates

Extra for providing & fixing 8mm thk. MR grade plywood + Matte melamine polished 4mm thk. Archidply make Longhi Veneer + Traditional Kashmir wooden Pinjrakari Jaali work (Pinjrakari base rate 700/- per Sqft) on top of veneer cladding, in place of POP layer on above mentioned false ceiling

P / F Rolling Shutter Boxing, 50x50mm fully seasoned secondary hardwood framework cladded with 12mm thk. BWP Plywood, single side laminated, colour matched to false ceiling paint, fixed / hinged, including all hardware, piano hinges, Hafele make concealed Lever Action Flush Bolt 19x200mm, Nickel Matt finish, article no. 911.62.571, for openable panel, neat grooves, including vertical face cladding with Matte melamine polished 4mm thk. Archidply make Longhi Veneer etc., complete as per design (flat plan area to be measured for rates)

Flooring & Wall Tiling

P / L of 600x600mm Opal Gris Vitrified Tile flooring, Qutone make, laid in diamond pattern with 1:4 cement mortar, with 3mm thk. PVC spacer & MYK Laticrete make epoxy grout filling 88 Silver Shadow (I), including 100mm skirting on full perimeter of site, as per flooring plan P-004 & TF – P-004

P / L of 300x600mm Geometry Grey Vitrified Tile flooring, Nitco make, laid with 1:4 cement mortar, with 3mm thk. PVC spacer & MYK Laticrete make epoxy grout filling 88 Silver Shadow (I), as per flooring plan FF – P-004

P / L of 600x600mm 16mm thk. Natural Black galaxy Granite flooring, laid with 1:4 cement mortar, with 3mm thk. PVC spacer & MYK Laticrete make epoxy grout filling 22 Midnight Black (I), as per flooring plan FF – P-004

P / L 440x440mm Designer flooring with following specifications tiles from Sidrons, laid with 1:4 cement mortar, without PVC spacer, as per flooring plan FF- P-004 a)Orlydeco Esquina Tile b)Orlydeco Printed Tile c)Orlydeco Cenefa Tile

P / L of 300x600mm Ariste Beige LT (S) Vitrified Tile flooring, Nitco make, laid with 1:4 cement mortar, with 3mm thk. PVC spacer & MYK Laticrete make epoxy grout filling 23 Antique White (I), as per flooring plan TF P-004

P / L Jindal Mechno Bricks make Brick Paver tile Paver Press, Terracotta colour, Size - 230x115x34mm, laid with 1:4 cement mortar, with 6mm thk. PVC spacer & cement grout filling, as per flooring plan TF P-004

P / F of 300x200mm Glazed Ceramic Tile cladding on Pantry walls, White colour, Kajaria make, on Pantry walls, installed with 1:2 cement mortar, with 3mm thk. PVC spacer & MYK Laticrete make epoxy grout filling 22 Midnight Black (I), as per drawing no. FF – E-006

P / F 300x600mm Geometry Grey Tile wall cladding, Nitco make, on toilet walls, installed with 1:2 cement mortar, with 3mm thk. PVC spacer & MYK Laticrete make epoxy grout filling 88 Silver Shadow (I), as per drawing no. FF – E-008

P / F 300x600mm Geometry Blue Décor Tile wall cladding, Nitco make, on toilet walls, installed with 1:2 cement mortar, with 3mm thk. PVC spacer & MYK Laticrete make epoxy grout filling 88 Silver Shadow (I), as per drawing no. FF – E-008

P / L of 300x600mm Ariste Beige LT (S) Tile wall cladding, Nitco make, installed with 1:2 cement mortar, with 3mm thk. PVC spacer & MYK Laticrete make epoxy grout filling 23 Antique White (I), as per drawing no. TF -E-003

P / L of 300x600mm Berkene Grey Décor (M) Tile wall cladding, Nitco make, installed with 1:2 cement mortar, with 3mm thk. PVC spacer & MYK Laticrete make epoxy grout filling 23 Antique White (I), as per drawing no. E-010

P / L of 12x12mm Solid 304 grade SS inlay between tile transitions, as per flooring plan P-004 & TF – P-004

Doors & Windows

P / F 1350x2000mm Main Door, 50x100mm section size fully seasoned Ivory Teakwood door frame in Matte melamine polish (polish color match to veneer), with 10mm thk. frameless Toughened glass door, as per drawing no. D 001 (including all material, hardware & finishes as mentioned in drawings)

P / F 800x2100mm Cabin & Conference Room Door, 50x100mm section size fully seasoned Ivory Teakwood door frame in Matte melamine polish (polish color match to veneer), with 100x35mm section size framed glass door with 8mm thk. Toughened glass, as per drawing no. D 002 (including all material, hardware & finishes as mentioned in drawings)

P / F 750x2100mm Single Leaf Pantry Door, 35mm thk. Flush door with glass vision panel with Matte melamine polished 4mm thk. Archidply make Longhi Veneer on both sides, as per drawing no. D 003 (including all material, hardware & finishes as mentioned in drawings

P / F 2100mm & following width Single Leaf Door, 35mm thk. Flush door panel with 4mm thk. Archidply make Longhi Veneer on both sides (Matte melamine polish on outer face & matte PU polish on inner face) (including all material, hardware & finishes as mentioned in drawings) a)750mm width for Toilet & Change Room, as per drawing no. D 004

P / F Matte melamine polished 100x50mm section size fully seasoned Ivory Teakwood door frame only for Trail Room Entrance

Partitions & Joinery Elements

P / F of 1900x2300x500mm depth (overall size) Loose Joinery Item "Ladies Coat Display Unit", as per drawing no. F-001, 003 & 004, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 2675x2300x500mm depth (overall size) Loose Joinery Item "Men's Coat & Waist Coat Display Unit", as per drawing no. F-002, 003 & 004, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 1500x2300x500mm depth (overall size) Loose Joinery Item "Silk Yardage Fabric Display Unit", as per drawing no. F-005, 003 & 004, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 4807x2300x500mm depth (overall size) Loose Joinery Item "Worsted Suit Length Fabric Display Unit", as per drawing no. F-006, 003 & 004, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 1765x2300x500mm depth (overall size) Loose Joinery Item "Ladies Suit Silk Display Unit", as per drawing no. F-012 & 004, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 1580x2300x500mm depth (overall size) Loose Joinery Item "Stoles & Dupatta Display Unit", as per drawing no. F-013 & 004, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 1500x1200x500mm depth (overall size) Loose Joinery Item "Saree Display Unit", as per drawing no. F-010 & 025, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 1420x2000x75mm depth (overall size) Fixed Joinery Item "Phiran Display Unit", as per drawing no. F-011 & 025, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 1500x900x750mm high (overall size) Loose Joinery Item "Counter 1", as per drawing no. F-007 & 009, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture) (Pinjrakari base rate 700/- per Sqft)

P / F of 1500x900x750mm high (overall size) Loose Joinery Item "Counter 2", as per drawing no. F-008 & 009, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture) (Pinjrakari base rate 700/- per Sqft)

P / F of 1500+1950mm length x 1050mm height x 600 & 300mm depth (overall size) respectively "L" shaped Loose Joinery Item "Reception Counter", as per drawing no. F-014 & 015, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture) (Pinjrakari base rate 700/- per Sqft)

P / F of 1950x450x750mm high (overall size) Loose Joinery Item "Reception Back Counter", as per drawing no. F-016, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 2050x500x750mm high (overall size) Loose Joinery Item "Display Near Reception", as per drawing no. F-017 & 025, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 750x500x750mm high (overall size) Loose Joinery Item "Raw Material Display Table", as per drawing no. F-018 & 025, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 1200x450x450mm high (overall size) Loose Joinery Item "Bench Seating", as per drawing no. F-019 & 025, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 2405x620x2300mm high (overall size) Fixed Joinery Item "Conference Room TV Console", as per drawing no. F-020, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 2400x1050x750mm high (overall size) Loose Joinery Item "Conference Table", as per drawing no. F-021, including all material, signage letters, Innofit electric box, hardware & finishes as mentioned in drawing

P / F of 2200x450x2300mm high (overall size) Fixed Joinery Item "Cabin Back Counter", as per drawing no. F-022, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 1150x450x2300mm high (overall size) Loose Joinery Item "Full Height Storage Unit", as per drawing no. F-023, including all material, hardware & finishes as mentioned in drawing

P / F of 450mm diameter & 430mm high (overall size) Loose Joinery Item "Pouf Trial Room", as per drawing no. F-024, including all material, hardware & finishes as mentioned in drawing (leatherite base rate 650/- per Rm)

P / F of 600x300x150mm high (overall size) Loose Joinery Item "Mannequin Podium Detail", as per drawing no. F-026, including all material, hardware & finishes as mentioned in drawing

P / F 1050x750mm high overall size Soft Board Panel, Matte melamine polished 50x30mm fully seasoned Ivory Teakwood framework with 12mm thk. Soft board with 8mm thk. Backing plywood, as per detail DET. 008

P / F 2270x2300x123mm depth overall size Reception Backdrop Panelling, fabricated from 50x100mm fully seasoned secondary hardwood framework & cladded with 19mm MR plywood + Matte melamine polished 4mm thk. Archidply make Longhi Veneer, as per drawing no. FF – E-002, including all material, hardware & finishes as mentioned in drawing

P / F Column cladding, 20x40mm fully seasoned secondary hardwood framework cladded with 19mm thk. MR grade plywood & finished with Matte melamine polished 4mm thk. Archidply make Longhi Veneer & Matte melamine polished 125x125x25mm thk. fully seasoned Ivory Teakwood "L" cladding with Pinjarkari Jaali (as per artwork) on all corners, with following additional

A) "Type 1" with Traditional Kashmir wooden Pinjrakari work (Pinjrakari base rate 700/- per Sqft) on top of 2 sides of veneer cladding & 5mm thk. Hard silvered looking mirror on other 2 sides in place of veneer, as per drawing no. DET-002 (Flat elevation area to be measured for rates)

B) "Type 2" with 5mm thk. Hard silvered looking mirror on one face only in place of veneer, as per drawing no. DET-003 (Flat elevation area to be measured for rates)

C) "Type 3" with Traditional Kashmir wooden Pinjrakari work (Pinjrakari base rate 700/- per Sqft) on top of veneer cladding on one face only, as per drawing no. DET-004 (Flat elevation area to be measured for rates)

D) "Type 4" with 4mm thk. MDF in place of veneer on all faces, as per drawing no. E-004 (Flat elevation area to be measured for rates)

P / F of 100mm deep Graphic panelling, fabricated from 20x40mm fully seasoned secondary hardwood framework finished with 12mm thk. MR grade plywood with 0.8mm thk. Off white colour balancing laminate on front face only (excluding light fitting & vinyl graphic), as per drawing no. DET-006 & 007

a) 1800x1500mm (near raw materials table)

b) 1200x1500mm (near entrance)

P / F of following size Matte melamine polished Wooden decorative frames with 5mm thk. Hard silvered mirror & 6mm thk. backing plywood, 50x35mm section size fully seasoned Ivory Teakwood framework, as per drawing no. DET-009, including all material, hardware & finishes as mentioned in drawing

a) 600x1800mm (overall size)

b) 750x1200mm (overall size) without mirror & with 12mm thk. Backing plywood with 0.8mm thk. Off white colour balancing laminate on front face only (excluding graphic vinyl)

P / F 122mm thk. Standard Double Board Gypsum Partition with 70mm GI Stud & 24 Kg/Cum Glass Wool filling, as per manufacturer guideline (India Gypsum/ Lafarge make)

Extra for/ less for providing & fixing single layer of 12mm thk. Everest make Cement board (to act as base for tile fixing in Pantry), in place of 2x12.5mm thk. Gypsum boards) on top of above-mentioned GI framework

Extra for providing & fixing 8mm thk. MR grade plywood + Matte melamine polished 4mm thk. Archidply make Longhi Veneer in place of secondary layer of 12.5mm thk gypsum board on above mentioned partition

P / F 50x75mm section size Matte melamine polished fully seasoned Ivory Teakwood "L" shape framework in with Traditional Kashmir wooden Pinjrakari work (Pinjrakari base rate 700/- per Sqft), securely anchored to false ceiling & floor, as per drawing no. DET-001 (Flat elevation area to be measured for rates)

P / F Wall Panelling, fabricated from 20x40mm fully seasoned secondary hardwood framework & cladded with 19mm MR plywood + Matte melamine polished 4mm thk. Archidply make Longhi Veneer, as per drawing no. E-005, including all material, hardware & finishes as mentioned in drawing

P / F of Seasoned fully seasoned secondary hardwood for various GI frame reinforcement/ above false ceiling framework etc., as required at site

P / F Overhead storage Unit in pantry, in 19mm thk. Marine plywood, 450mm deep with backing plywood with all side laminated shutters, shelves, Hettich make soft closing spring loaded hinges and furniture locks & 3mm thk. melamine polished hardwood edging on all exposed edges of plywood, all internal surfaces laminate finish, as per detail

P / F Under counter storage units in pantry, in 19mm thk. Marine plywood, 600mm deep with backing plywood with all side laminated shutters, with shelves, Hettich make soft closing spring loaded hinges, SS handles and furniture locks & 3mm thk. melamine polished hardwood edging on all exposed edges of comm. board - all internal surfaces laminate finish, drawers to have soft closing Hettich make telescopic drawer slides, including 16mm thk. Black Granite on counter top, as per detail

P / F Washbasin counters, fabricated from 32x32x2.5mm thk. MS square pipe framework securely anchored to brickwall and finished with 16mm thk. Pre-polished Grey William natural marble including edge polishing and chamfering & 300mm height vertical pelmet

a) 750x600mm Plan size, as per drawing no. E-008A

P / F 275mm width & 16mm thk. Pre-polished Grey William natural marble including edge polishing on exiting window jamb from inside only, as required at site

P / F 2100x600x200mmm depth Electrical DB boxing, fabricated from 19mm thk. MR plywood & finished with Matte melamine polished 4mm thk. Archidply make Longhi Veneer & fully seasoned Ivory Teakwood louvers, as per drawing no. F-031 (flat elevation area to be measured for rates)

Miscellaneous / Bought-Out Items

P / F Mac Décor make Monotones TR-5401 Vertical blinds (Base rate 2000/- per Sqm)

P / F 20x20mm, 2400mm long SS 304 grade Brush finish Edge Protection angles, fixed to partition/ wall corners with PVC anchor fasteners, as per detail/ as directed by site engineer/ architect

S / I Hafele make 76mm diameter Unisex Washroom Symbol SS Plate, Article no. 987.10.000S / I Hafele make 76mm diameter Unisex Washroom Symbol SS Plate, Article no. 987.10.000

S / I Hafele make Security door chain StarTec, Article no. 911.59.172, Polished Chrome finishS / I Hafele make Security door chain StarTec, Article no. 911.59.172, Polished Chrome finish

S / I Hafele make Door Viewer, Article no. 959.01.010, Chrome finishS / I Hafele make Door Viewer, Article no. 959.01.010, Chrome finish

S / I Hafele make Floor mounted Door Stopper, Article no. 937.55.140, SS matte finishS / I Hafele make Floor mounted Door Stopper, Article no. 937.55.140, SS matte finish

S / I Hafele make Wall mounted Door Stopper, Article no. 937.13.530, SS matte finishS / I Hafele make Wall mounted Door Stopper, Article no. 937.13.530, SS matte finish

S / I of following size LED TVs with wall mounted brackets, complete in all respect & accessories (Samsung/ LG make)

a)55" FHD LED TV with wall mounting bracket

S / I Remote operated call bell

S / I Panasonic make KX-TSC62SXB Corded Telephone set

S / I Lipton make 4 Lane Tea/ Coffee Vending Machine, Semi-Automatic / Manual operating mode, 5 -7 cups per minute dispensing rate, 5L capacity Insulated Boiler, Premix Capacity 1.2 Kg Each, Mixing Unit - 4 nos.

S / I LG make GL-D201APZY, 190 Litres capacity Refrigerator

S / I LG make MC2145BPG, All In One Microwave Oven

S / I Tyco Sensormatic make Essentials 1.8m Acrylic Pedestal Dual system with all accessories complete in all respect

P / F Hard silvered looking mirror with 12mm thk. BWP grade plywood & 20x40mm fully seasoned secondary hardwood framework with cove pelmet, as per drawing/ detail

1050x600x5mm thk.

P / F 600x1800x50mm thk. Wall mounted 5mm thk. Hard silvered looking mirror with matte melamine polished Ivory teak wood framework, as per drawing no. DT-009

S / I of Trial Room Curtain with 25mm diameter SS 304 grade pipe fixed to wall/ partition with fabric (fabric base rate 1000/- per Rm), as per approved shade & make (flat elevation area to be measured for rates)

S / I of 25mm diameter SS 304 grade pipe fixed to false ceiling for fabric display (excluding fabric cost)

S / I / T / C of Crompton make Fizzair (Hi speed) Wall mounted fan, Sweep - 300 mm, Color - Opal White with all accessories complete in all respect

S / I of Standing Female Mannequins, fabricated from fibre glass, including all accessories, City Creations make

P / F of MS rolled section manual operated Rolling shutter with torsion springs including spray applied enamel painting of same after installation, complete in all respect

Bought Out Furniture Elements

S / I of Executive Chairs, Geeken make ASTRA series, GA-5004

S / I of Wire chair with upholstered seat, Metal Avenue make

S / I of Zurich – W chair, Metal avenue make

S / I of Visitor Chairs, Shearling Skin make BREK/L4 with upholstery as per approved fabric sample (fabric base rate 850/- Rm)

S / I of Geeken make 1500x700x750mm Executive table, , STELO 1 (table only) with white colour laminate finish, as per approved colour scheme

S / I of Hafele make loose CPU trolleys with lockable castors

Signage, Graphics & Frosting Film

P/F Following flat elevation size (approx.) 6mm thick Laser Cut MS black powder coated letters )size approximate, to be confirmed on site) for main sinage (façade area)

a) 125x1450mm width

b) 150x1750mm width

P / F 250x200mm high & 6mm thk. SS flat laser cut letters (as per artwork) “BILLING” signage (near reception area), adhesive bonded to wall/ partition surface

P / F 250x200mm high & 6mm thk. SS flat laser cut letters (as per artwork) “CHANGING ROOM” signage (near reception area), adhesive bonded to wall/ partition surface

S / I of following size with black PVC picture frames with 3mm thk. non reflective glass & artwork to be printed on art card, as per artwork/ pictures

a) 600x750mm (overall size)

b) 600x300mm (overall size)

c) 415x300mm (overall size)

d) 300x300mm (overall size)

e) 450x600mm (overall size)

g) 450x900mm (overall size)

S / I 3M make 180C media Eco-solvent printed, pasted on smooth wall/ gypsum partition, to be done by 3M authorised converter, as per design/ artwork

S / I 3M Anti Graffiti 8520 Matte finish film over 180C media, to be done by 3M authorised converter, as per design/ artwork

P / F 3M Scotchcal 7725SE-314 Dusted Crystal (acid etched look) electrocut graphic film as per design

SANITARY FIXTURES

S / I / T / C of following sanitary fixure/ fitting / accessories etc., complete in all respect

Basin Faucet (Jaquar make), DOM-JQR-ARI-CHR-39005B

Counter Top Wash Basin (Jaquar make), OPS-WHT-15901N or Catalogue no. : 91209, Hindware make

Wall Hung WC with soft closing seat cover (Jaquar make), FLS-WHT-5953SM or Catalogue no. : 92538 Hindware make

Health Faucet (Jaquar make), ALD-CHR-565

Flush Plate (Jaquar make), JCP-CHR-392415 or Geberit make actuator plate Sigma30 for dual flush

Toilet Paper Holder with folder (Jaquar make), AKP-CHR-35753PS

Liquid Soap Dispenser (Jaquar make), ACN-CHR-1137N

Urinal with automatic flushing sensor & fixing kit (Jaquar make), URS-WHT-13255 or Sensomatic Sensor Urinal, Hindware make Catalogue no. : 60013 Hindware make

Urinal Partition (Jaquar make), 1110-US

Concealed Cistern Kit with wall mounting frame (Jaquar make), JCS-WHT-2400FS or Geberit Sigma concealed cistern 12 cm, 6/3 litres

600mm long SS 304 grade braided flexible connection pipes (Jaquar/ Marblo make)

Angular Stop Cock (Jaquar make), VGP-CHR-81053

Double Coat Hook, ACN-CHR-1161N (Jaquar make)

Hand Dryer, HDR-SAP-M99ACS (Jaquar make) or equivalent from Euronics

Wall mounted Paper Towel Dispenser, PTD-SAP-DT0106CS (Jaquar make) or equivalent from Euronics

2-way Bib Cock, FLR-CHR-5041N (Jaquar make)

Kimberly-Clark Professional make AQUARIUS Air Care Freshener Dispenser, White colour finish, Product code - 6994 with 4 nos. refill cartridges or equivalent from Euronics

Bottle Trap (with Internal Partition) 32mm Size with 250mm & 190mm Long Wall Connection Pipes & Wall Flange (Jaquar make), ALD-CHR-769L250X190 or equivalent from Hindware

Waste coupling 32mm Size Half Thread with 80mm height (Jaquar make), ALD-CHR-709 or equivalent from Hindware

Jayna make Signature collection SBF-02 470x420mm overall size, Single Bowl SS 304 grade Matte finish Kitchen sink (without drainboard) with drain pipe, waste jaali etc., complete in all respect

Sink Mixer, 1-Hole with Swinging Extended Spout (Table Mounted Model) with 600mm Long Braided Hoses (Jaquar make), FLR-CHR-5319NB

LIGHT FIXTURES

Supply only of following Light Fixture/ fittings with all required accessories, complete in all respect, as per site condition

Halomax make HX GS ECO LED Track lights made of diecast aluminum, complete with reflectors made of aluminum 99.98% pure with wide beam angles available with Citizen / Bridgelux LED 20W COB, 4000K color temperature, and LED drivers Bag make or ANKUR make XTR - LED - 3954 20W 4000K TRACK SPOT WHITE FINISH SIZE:- DIA-75mm x LENGTH-165mm

Halomax make 1 Running meter length powder coated aluminium track for abovementioned light fixture or ANKUR make XTR-SQ-IP/0194 TRACK 1MTR/WH

Halomax make HX9539, Recess mounted Tiltable LED down lighter made of diecast aluminium with High quality aluminium reflector. Light Source: 9W COB LED, 4000K color temperature, with High power LED driver or ANKUR make XRL - LED - 02003 9W COB 4000K WHITE

Halomax make HX 6551 "X" shape Suspended Linear Channel light, completely made of aluminium extrusions with frosted acrylic visor, with 40W LED, 4000K color temperature, including suspension arrangement or ANKUR make LED - LINEAR - P 5070 - S CUSTOM SIZE & SHAPE

Halomax make HX 9533 Recess mounted Tiltable LED down lighter made of diecast aluminium with High quality aluminium reflector. Light Source: 6W COB LED, 4000K color temperature, with High power LED driver or ANKUR make XRL - LED - 02001 6W 4000K

Halomax make HX8026 Flexible LED Strip with Triangular profile aluminium channel and high quality milky acrylic cover. Light Source: 10 W/Rm flexible LED, 4000K color temperature, with High Power LED Drivers or ANKUR make XOL LED IP/0513 10W

Halomax make HX8024 Flexible LED Strip with Rectangular profile aluminium channel and high quality milky acrylic cover. Light Source: 10 W/Rm flexible LED, 4000K color temperature, with High Power LED Drivers or ANKUR make LED - RL - GL - 5653 10W/METER 4000K

Halomax make HX3028, Wall mounted fitting made of die cast aluminium with frosted toughened glass. Light Source: 23W CFL, 4000K color temperature, with electronic ballast with pressure die cast aluminium body & IP65 protection or equivalent form ANKUR make

Wipro make D532200 Garnet 22W LED wall mounted Batten light, with frosted acrylic diffuser, 4000K color temperature or equivalent from Philips lighting

Custom designed/ make Bamboo Pendent lamp with 6W LED bulb, 4000K colour temperature, as per approved sample

Equipments

S / I / T / C of Five Star rated Split AC unit with reciprocating compressor. The units should be complete with indoor unit, condensing unit, controls, microprocessor control panel, wiring, etc. (Toshiba make)

A)1.5 TR Hi-Wall type Split unit

B)1.5 TR Cassette type Split unit

C)2.0 TR Cassette type Split unit

D)3.0 TR Cassette type Split unit

Supply, installation, testing and commissioning of copper refrigerant piping of approved sizes duly insulated with nitrile rubber insulation of 9mm thickness & Cabling Between Indoor and Outdoor Units (irrespective of no of circuits)

A)1.5 TR Hi-Wall type Split unit

B)1.5 TR Cassette type Split unit

C)2.0 TR Cassette type Split unit

D)3.0 TR Cassette type Split unit

Supply, installation, testing and commissioning of insulated PVC medium class condensate drain water piping with bends, reducers, tees, supports etc. The drain piping shall be insulated with nitrile rubber of 6mm thick as per specifications and drawings

20mm dia.

25mm dia.

S / I / T / C of Cata make B-15 Exhaust fan for toilets, including all accessories, complete in all respect

Cable Tray

Providing, Receiving, storing, handling, assembling fixing in position testing and commissioning of MS powder coated perforated type Cable tray for refrigerant & drain piping, with bends and necessary fittings, suspension hardware etc.

A)300x75x2mm thick

B)200x75x2mm thick

C)100x75x2mm thick

ELECTRICAL

Supplying, Installation, Testing and Commissioning of Main Electrical Panel, as per SLD and specification, fabricated out of 16 SWG CRCA sheet steel in compartmentalized design as per specification and drawings. These distribution boards shall be wall /floor mounted. The rates shall include the painting, circuit terminations with numbering, earthing and one set of suitable rating of 415V 3 phase 4 wire, 50Hz color coded bus bar with neutral link, earthing terminals suitable for outgoings, and all indications, metering, control wiring, etc. as per SLD etc. and as required complete in all respect, as per following details

MAIN LT PANEL (MDB) Incoming: One (1) Nos., 80A, 415V, 25 kA (Ics=Icu=Icw =25kA for 1 second), 4 Pole MCB with Micro-processor based release for Over current, Short Circuit and Earth fault protections, and with ON/OFF/TRIP indications, metering, protections, push buttons, MFM etc. as per SLD complete in all respects as mentioned and as required. (Incomer From Main Meter Board ) Bus Bars: One (1) Set of 125A TPN bus bars of aluminium alloy Outgoings: Seven (7) Nos 16A 4P MCB Five (5) Nos 32A 4P MCB Two (2) Nos 63A 4P MCB Built-in Capacitor Panel with APFCR with following capacity capacitorsBuilt-in Capacitor Panel with APFCR with following capacity capacitors Three (3) Nos 2 kVAR Capacitor Two (2) Nos 5 kVAR Capacitor MAIN LT PANEL as described above, as per SLD

Supplying, Installation, Testing and Commissioning of following three pole and neutral, sheet steel, double door MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus-bar, neutral bus-bar, earth bar, din bar, detachable gland plate, inter-connection, phosphatized and powder painted including earthing etc. as required, as per respective SLDs,

A) Light + Power DB FF (LPDB FF) 12 Way TPN DB Incomer: One (1) No. 63A 4P MCB Three (3) Nos. 63A 2P RCCB (30mA) Outgoings : Twenty Seven (27) Nos 10/16A SP MCB as required Seven (7) Nos 25/32A SP MCB as required Two (2) Nos 63A SP MCB as required

B) UPS DB (UDB) 12 way SPN DB Incomer:- one (1) No:32A 2P MCB Outgoing:- Twelve (12) Nos SP MCB as required

Light / Power Point Wiring, Switch/ Sockets & Sub-Mains Wiring

S / I / T / C of Switch controlled primary light points with 2.5 Sqmm PVC insulated 1100 volts grade multistranded FRLS copper conductor wires, in IS marked 25 mm dia medium duty PVC conduit, recessed and/or surface mounted, including the cost of cutting chases in brick work and repairing/making the chases good and including providing and fixing of 6 amps single pole piano type modular switch, complete with grid & cover plate in GI box (zinc chromate passivated) and earthing of fixtures and the box with 1.5 sqmm PVC insulated copper conductor earth wire including Circuit Wiring from DB to switch boards, with 2.5 sqmm PVC insulated copper wire complete as per specifications and as required.

Same as above (3.1) but Switch controlled secondary points with 2.5 sqmm PVC insulated 1100 volts grade multistranded FRLS copper conductor wires

S / I / T / C of 5 pin 6A 240 volt switch socket outlet with 2x2.5 sqmm (P+N) PVC insulated 1100 volts grade multistranded FRLS copper conductor wires, in IS marked 25 mm dia medium duty PVC conduit, recessed and/or surface mounted, including the cost of cutting chases in brick work and repairing/making good, including the cost of providing and fixing modular grid plate mounted 5 pin 6 amp 240 volt combined shuttered socket outlet alongwith 6 amp 240 volt control switch housed in a zinc chromate passivated MS box with moulded cover plate and earthing of third pin of socket with 1.5 sq.mm PVC insulated copper conductor wire, complete as per specifications and as required. (Maximum two (2) Outlets to be connected on one circuit)

S / I / T / C of 6 pin 6/16A 240 volt switch socket outlet with 2x4.0 sqmm (P+N) PVC insulated 1100 volts grade multistranded FRLS copper conductor wires, in IS marked 25 mm dia medium duty PVC conduit, recessed and/or surface mounted, including the cost of cutting chases in brick work and repairing/making good, including the cost of providing and fixing modular grid plate mounted 6 pin 6/16 amp 240 volt combined shuttered socket outlet alongwith 16 amp 240 volt control switch housed in a zinc chromate passivated MS box with moulded cover plate and earthing of third pin of socket with 2.5 sq.mm PVC insulated copper conductor wire, complete as per specifications and as required. (Maximum two (2) Outlets to be connected on one circuit)

S / I / T / C of Outdoor grade (IP 66) switch-socket outlets of following specifications:

A) 32A Single phase (3 pin) outdoor grade Industrial switch socket

B) 16A Three phase (5 pin) outdoor grade Industrial switch socket

Supply & fixing of TV socket outlet with modular plate in zinc chromate passivated MS box complete as per specifications and as required

S / I / T / C of Innofit make DeskPORT - FTB 164 Hydraulic box, module as per electrical drawing, as required at site

S / I / T / C of Sub-mains, AC & UPS wiring with PVC insulated copper conductor of suitable size 660/1100 Volts grade wires in existing concealed or surface mounted 25/32/40 mm dia PVC rigid conduit either in slab or on above false ceiling or in walls or in partitions and in existing raceway, cable trays terminating the conductors in respective panels DB's switch boxes with suitable size earth wires and associated hardware etc.as per technical specifications and drawings

A)2x4.0 + 1x2.5 Sqmm Copper FRLS wires

B)4x2.5 + 2x2.5 Sqmm Copper FRLS wires

C)4x16.0 + 2x6.0 Sqmm Copper FRLS wires

Electrical Cables

Supply, laying , testing, commissioning & termination of 1100 V grade XLPE insulated aluminium conductor armoured cables including the cost of providing required gap between adjacent cables (minimum one cable dia) and including the cost of providing identification tags, all crimping lugs and compression glands, cable sockets insulation tape sealing compound etc. complete as per specification, as required

25 Sqmm, 4C Al

16 Sqmm, 4C Al

Conduits & Cable Trays

Providing, Receiving, storing, handling, assembling fixing in position testing and commissioning of MS painted Ladder type Cable tray, with bends and necessary hardware etc.

A) 50x300x50x2mm thick

B) 50x150x50x2mm thick

C) 50x100x50x2mm thick

Supplying and fixing fabricated steel items like cable tray supports, MS clamps, hangers, frames etc. made of MS angles/flats, duly painted with primer and two or more coats of enamel paint including drilling holes cutting ,bending , tapping, threading etc. complete in all respect as per site requirement.

Supplying, fixing and laying of following conduits (for various low voltage cabling like Video conferencing, CCTV, Cable TV etc.) in ceiling/ wall panelling/ partitions/ flooring etc. includes all chase cutting and making the surface good along with the 2mm dia size GI pull wire complete in all respect of following sizes & specifications

A)25mm dia 16 SWG PVC conduit

B)25mm dia. Flexible PVC conduit

Earthing Work

P / Making of Chemical type earthing stations including testing at locations as called for, as per standard detail

S / F of following Copper earthing wires on existing tray/ trench/ ground/ PVC pipe/ walls including all necessary fixing accessories and effecting connections with copper riveting /welding etc. as approved. All copper joints shall be tinned:

4 SWG bare Cu Wire

Light Fixture, Fan & Appliances

I / T / C of following light fixture & fans in their respective locations with all accessories, complete in all respect

Recess/ Surface mounted light fixtures

Ceiling/ Wall/ Exhaust Fans

Electrical Equipments

S / I / T / C of 2.0 kVA 1-phase On-line UPS (APC/ Emerson make) with built-in 15 minutes SMF type battery back-up etc. Complete in all respect

S / I / T / C of 35 kVA 3-phase Silent DG including lifting/ shifting, making base footing etc. (Sudhir/ Jackson make) including 80-100A capacity AMF panel with required signal & power wiring, complete in all respect

Misc. Items

Temporary Lighting for site work

Networking & Telephone

S / L of 1000 Mbps CAT-6 Cable for LAN, Access control, TV etc. (AMP make), in IS marked 25 mm dia medium duty PVC conduit, recessed and/or surface mounted, including the cost of cutting chases in brick work and repairing/making the chases good with GI box (zinc chromate passivated)

S / L of 2 core telephone cable, in IS marked 25 mm dia medium duty PVC conduit, recessed and/or surface mounted, including the cost of cutting chases in brick work and repairing/making the chases good with GI box (zinc chromate passivated)

S / F of Modular Network Data outlet with face plate, RJ-45 socket and Zinc chromate passivated box complete as required (AMP make)

S / F of RJ-11 Telephone socket outlet with modular plate and Zinc chromate passivated box complete as required (AMP make)

S / I / T / C of 10 pair Telephone Tag block with enclosure

S / I / T / C of D-Link make 24 port network switch with wall mounted 9U rack, complete as required

FIRE DETECTION

Fire Detection System (Conventional System)

Supply, Installation, Testing and Commissioning of Microprocessor based 2 Zone non-expandable conventional type fire alarm panel. The panel should be equipped of 2 Zone loop with loop capacity to take maximum 25 detectors per zone, Three Control Levels, reset function inbuilt and alarm & Fault Display by individual multicolor LEDs for each detector group. 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and then be capable of operating the system for 2 hours during an emergency conditions as required. The panels should comply to EN 54 Part 2 & Part 4 (Agni make)

P / F Conventional Type Photo-thermal Smoke Detector with inbuilt scattered light measurement, rate of rise and fixed temperature based technology and LED indication should be on the centre of the detector. with mounting base (System Sensor make)

P / F Conventional Type Thermal Detector with inbuilt rate of rise and fixed temperature based technology and LED indication should be on the center of the detector. with mounting base (System Sensor make)

P / F Response Indicator

P / F Hooter cum Strobe

P / F Manual Call Point

P / F Power Supply unit (SMPS) with battery backup for entire system

S / L 2Cx1.5sqmm Copper conductors, armoured PVC insulated IS marked cable for fire detection system, including termination of cable ends with all required materials including testing, checking etc.

S / I Fire Extinguishers, Ceasefire make, complete with all accessories as per manufacturers specifications

2 Kg capacity CO2 based portable fire extinguisher

4 Kg capacity ABC type portable fire extinguisher

S / I / T / C of Bajaj make 220210, BESL 03 LED DSD WBB Green, Green colour, Double sided LED Fire Exit signage with built in battery back-up for 2 hrs. - 6 nos.

CCTV System

S / I / T / C of IP based CCTV system with following components (CP Plus or Hikvision make),

Internal 4 MP Full HD WDR IR Dome Camera (CP-UNC-DD40L3-D)

External 4 MP Full HD IP WDR IR Bullet Camera (CP-ENC-T41L3-VMD)

8 channel NVR (Network Video Recorder) with server rack module (CP-UNR-408T2) with minimum 8 TB HDD

Wiring with Dlink make CAT-6 wire in existing MS conduits

MUSIC

Piped Music System

S / I / T / C of Mosgate make, Music system comprising of following components:

High Sound Ceiling Speaker, 20 Watts

2 channel audio booster cum amplifier with USB & Aux ports

Volume Control

Wi-Fi Streamer

Wiring for Music system. 80/0.2mm (2.5 Sqmm) 2-core flexible twin twisted colour coded ATC overall PVC sheathed audio cable (Krystal make) laid in existing surface/ recessed PVC conduits as required

DRAINAGE & WATER

Soil & Waste Pipes

Providing, fixing, jointing and testing in position the uPVC SWR grade pipe (Astral make) for soil, waste and rain water installation conforming to I.S. :4985 (working pressure 6 kg/sq. cm) cut to required lengths including all necessary fittings (P/ S traps) and specials such as Bends, junctions, offsets, cleanout plugs as required/directed at site, access pieces (plain or door) & vent cowl. Fixing at wall/ceiling level supported by clamps & hangers etc. Making proper connection including cutting, chases/ holes in floors/ walls/ slab etc. and making good the same after pipes have been duly laid, making connection with existing manholes/ gully traps complete

A) 75 mm outer dia

B) 110 mm outer dia

Providing and fixing in position uPVC SWR grade pipes and fittings working pressure 6 kg/sqcm) & cleanout plugs conforming to IS (for waste pipe from bottle trap to floor trap) Including fixing at wall / ceiling level supported by clamps and hangers etc. Cutting holes in wall/floors/slabs and making good the same with cement concrete 1:2:4 complete as required.

A) 32 mm outer dia

B) 40 mm outer dia

P / L cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm and down gauge) 75mm in bed and all round uPVC SWR grade soil/ waste pipe

A) 75 mm dia under floor including shuttering and centering

B) 110 mm dia under floor including shuttering and centering

P / F Chilly make SS square cleanout plug with hinges & suitable inset keys for opening male threaded joint caulked to C.I. pipe including cost of lead jointing

A) 75 mm dia

B) 100 mm dia

P / F Chilly make SS 304 Grade Anti-cockroach Floor trap, CCT-SFS-76 Lifestyle square, 140x140mm, joints treated with neat cement slurry with an admixture of pigment to match the shade of stone/tile

Cold / Hot Water Supply

Supply, laying, testing and commissioning of CPVC pipes (Astral make) conforming to CTS (copper tube size) SDR-11 as per ASTM D 2846 with necessary fittings, such as bends, tees, unions, reducers, headers, brass fittings flanges & plugs etc., up to the size of 50 mm dia, jointing with CPVC solvent cement of medium body IPS brand or equivalent conform and fixing at wall/ceiling level supported by clamps, hangers, structural steel supports, etc. as per specifications. Threading, jointing, and making proper connections, cutting hole in wall/floor/slab and making good the same good with cement concrete 1:2:4, complete as required. Cost shall include making connections with G.I. pipes & fittings.

A) 15 mm outer dia

B) 20 mm outer dia

C) 25 mm outer dia

D) 32 mm outer dia

Supply and covering (Thermal Insulation) hot water pipes with 9mm thick performed closed cell nitrite rubber pipe section insulation having density not less than 60 kg/cm2 and "K" valve not more than 0.034 w/m Deg. K @ 20 Deg C mean temperature, jointing

15 mm outer dia

20 mm outer dia

P / F full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 10 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc.

20 mm dia

25 mm dia

32 mm dia

Water Tank

S / I on Terrace, of following capacity, polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, (Sintex or Frontier make)

S / I of Water Level Sensor Panel with automatic electrical power supply cut-off, including all wiring etc. complete in all respect

Pumps

S / I / T / C of Grundfos make CM 4-4 pressure pump with starter panel, etc. complete in all respect

Water Geyser

S / I / T / C of Jaquar make 3 Ltrs capacity Electric operated Instant Water Geyser, including all accessories

M/S GHULAM HASSAN