REPAIR/MAINTENANCE OF DG SETS, POST TOP LATERN, FLOOD LIGHTS AND OTHER ALLIED MISC WORKS UNDER GE NORTH PATIALA

Amount

Servicing of DG set 125 KVA (MES No- i- 263/6004/DG,AL/02, II-263/6033/DG/09, III- 263/6074/DG/14) including replacement of following parts, alignment of Alternator, Minor reapir and complete checking of fuel Pump after necessary inspection of DG set complete all as specified and directed. Make of DG Set- Kirloskar/ Cummins/ Ashoka Layland. ( spares,lube oil and coolent shall be measured and paid separately under respective items of schedule here-in-after):-

Supply only Filter kit comprising of Air,Fuel and oil filters

Supply only Fan Belt as per sample

Dismantling Radiator assy complete including cleaning, washing with cleaning equipment and refitting the same complete all as specified and directed.

Servicing of DG set 75 KVA (MES No- 164090) Make-Kirloskar including replacement of following parts alignment of Alternator, minor repair and complete checking of fuel pump after necessary inspection of DG set complete all as specified and directed ( spares shall be measured and paid separately under respective items of schedule here-in-after):-

Supply only Filter kit comprising of Air,Fuel and oil filters

Supply only Fan Belt as per sample

Dismantling Radiator assy complete including cleaning, washing with cleaning equipment and refitting the same complete all as specified and directed.

Servicing of DG set 40 to 50 KVA (MES No- i- 263/6005/DG,AL/05, ii-263/6098/DG/16, iii- 715/6010/DG/06, iv- 261839W ) Make- Cummins/ Kirloskar) including replacement of following parts alignment of Alternator, Minor reapir and complete checking of fuel Pump after necessary inspection of DG set complete all as specified and directed ( spares shall be measured and paid separately under respective items of schedule here-in-after):-

Supply only Filter kit comprising of Air,Fuel and oil filters

Supply only Fan Belt as per sample

Dismantling Radiator assy complete including cleaning, washing with cleaning equipment and refitting the same complete all as specified and directed.

Servicing of DG set 25 KVA (MES No- 263/6043/DG/AL/06) ( Make- Kirloskar) including replacement of following parts alignment of Alternator, minor work and complete checking of fuel pump after necessary inspection of DG set complete all as specified and directed ( spares shall be measured and paid separately under respective items of schedule here-in-after):-

Diesel filter kit

Oil filter kit

Fan belt as per sample

Diesel pipe set with clamp as per sample

Repair of diesel pump

Repair of nozzle

Battery lead

Vibration pad

Diesel pipe

Dismantling Self Starter assy of DG set incl necessary repairs and reassembling the same after repair.

Servicing of DG set upto 10 to 12.5 KVA (MES No-i- 263/6075/DG/AL/11,ii-251942W) Make- Kirloskar/National including replacement of following parts alignment of Alternator, Minor reapir and complete checking of fuel Pump after necessary inspection of DG set complete all as specified and directed ( spares shall be measured and paid separately under respective items of schedule here-in-after):-

Supply only Filter kit comprising of Air,Fuel and oil filters

Supply only Fan Belt as per sample

Dismantling Radiator assy complete including cleaning, washing with cleaning equipment and refitting the same complete all as specified and directed.

Servicing of DG set 400 KVA Make:- KIRLOSKAR (SM No. 715/6023/DG/Al-07 and 715/6021/DG/AL-07) installed at BML water supply installation including replacement of following parts all as specified and as directed by Engr-in-Charge (spares,lube oil and coolent shall be measured and paid separately under respective items of schedule here-in-after):-

Fuel Filter Assy

Lub oil filter cartidge

Fuel pre filter assy

Air Cleaner primary element

Air Cleaner Safety element

Servicing of DG set 200 KVA Make:- KIRLOSKAR ((SM No. 715/6022/DG/Al-07) installed at Limb-II (Tw-09) water supply installation including replacement of following parts all as specified and as directed by Engr-in-Charge(spares,lube oil and coolent shall be measured and paid separately under respective items of schedule here-in-after):-

Fuel filter element pre

Fuel filter element Micro

Spin on filter for lubricant oil

16" Air cleaner primary element

Servicing of DG set 100 KVA Make:-KIRLOSKAR ( (SM No. 715/6024/DG/07) installed at LIMB-III(Tw-03) at Old cantt area including replacement of following parts all as specified and as directed by Engr-in-Charge( spares shall be measured and paid separately under respective items of schedule here-in-after):-

Diesel filter kit

Oil filter kit

Hose pipe kit

Hose clamp

Diesel tank hose pipe

Air filter assy

Battery charger

Fan belt as per sample

Repairing of Turbo with turbo repair kit

Dismantling Self Starter assy of DG set taking to the workshop if required and reassembling the same after replacement of following parts:-

Supply and fixing in replacement Pinion of Self starter complete

Supply and fixing in replacement Clutch assy of Self starter complete

Supply and fixing in replacement Carbon brush set of Self starter complete

Supply and fixing in replacement Copper Field coils of Self starter complete

Supply and fixing in replacement Ball bearing of Self starter as per sample complete

Dismantling Radiator assy and transportation to civil workshop and returning back after Repair to leakage of Radiator with soldering / brazing and repair to Top and Bottom Tank of Radiator of DG set and other connected items and refixing complete all as specified and directed.

Supply & filling and topping up Engine oil of suitable grade.

Supply & replace Coolant for Radiator.

Supply & fix as in replacement off load changeover switch side handle operated 415v 50hz 4 pole of capacity 63Amp. Make: STANDARD or equivalent of Havells, Crompton Greaves, L&T as approved by GE

Supply & fix as in replacement off load changeover switch side handle operated 415v 50hz 4 pole of capacity 100Amp. Make: STANDARD or equivalent of Havells, Crompton Greaves, L&T as approved by GE

Supply & fix as in replacement off load changeover switch side handle operated 415v 50hz 4 pole of capacity 125Amp. Make: STANDARD or equivalent of Havells, Crompton Greaves, L&T as approved by GE

Supply & fix as in replacement off load changeover switch side handle operated 415v 50hz 4 pole of capacity 200Amp. Make: STANDARD or equivalent of Havells, Crompton Greaves, L&T as approved by GE

Supply & fix as in replacement off load changeover switch side handle operated 415v 50hz 4 pole of capacity 400Amp. Make: STANDARD or equivalent of Havells, Crompton Greaves, L&T as approved by GE

Supply and replace contactor AC 415 volt , operating coil -230 volts , four pole type MCX 32 of L&T or equivalent of Scheneider / C&S / Legrand including auxiliary contacts 2NO+2NC suitable for AMF panel complete all as specified and directed .

Supply and replace contactor AC 415 volt , operating coil -230 volts , four pole type MCX 33 of L&T or equivalent of Scheneider / C&S / Legrand including auxiliary contacts 2NO+2NC suitable for AMF panel complete all as specified and directed .

Supply and replacement of AMF panel auto start relay / as per existing and with copper wiring of AMF panel with suitable size wire complete all as sample of existing relay, complete all as specified and directed.

Labour only for complete calibration for function and checking of AMF panel with and including minor repairs,tightening of wiring cables complete all as specified and directed at site

Material and labour for painting by using spray painting method for DG set canopy/complete body/LT panel board (After removing incoming/out going electrical connection and refixing the same) with two coats of superior quality synthetic enamel paint after cleaning of existing surface, removing rust including marking of incoming/outgoing feeder with letters, MES/SM Nos (Maximum area of painting 3 Sq Mtr) and all as per the direction of the engr-in-charge.

Supply & install in repair Lead Acid Battery 12 V 180 AH complete all as specified and directed. Make- EXIDE/AMRON

Supply & install in repair Lead Acid Battery 12 V 150 AH complete all as specified and directed. Make- EXIDE/AMRON

Supply & install in replacement of Battery Charger complete as per sample for DG set all as specified and directed. Make- Amarraja, Coronet Sukam, Luminous

Supply & install in replacement of Inverter 1500 VA complete all as specified and directed. Make- APC, Sukam, Luminous

Supply and replacing AVRs unit of alternator of DG Set 50 to 125 KVA capacity as per existing type and model and all as per the direction of the engr-in-charge.

Supply and replacing complete hose pipe set with clamps for DG sets of DG set capacity 12.5 KVA to 50 KVA as per existing type and size.

Supply and replacing complete hose pipe set with clamps for DG sets of DG set capacity 75 KVA to 125 KVA as per existing type and size.

Supply and fixing exhaust bellow assembling as per existing type and model.

M&L Dismantling the alternator of DG set of capacity 25 KVA from its base by using chain and pulley after removing the coupling with the engine, removing all nut, bolt with washer and all electrical connections of the alternator, shifting the alternator to work shop by crane and vehicle, opening into parts, checking all winding like main stator/rotor winding, exciter stator/rotor winding. Rewinding the main rotor and exciter rotor by using the "F" class insulation and existing gauge and type of magnet wire that was on the original motor, varnishing, heating, drying, greasing the bearings including replacement of unserviceable bearings, Re-fixing the complete including connection to the terminal box of the alternator at work shop and shifting the same to the site, Fixing the alternator to its base carefully by using chain and pulley, connecting it with existing engine including checking the alignment of alternator with the engine, connecting all electrical connections of the alternator and testing the DG set on "OFF/FULL LOAD", matching to the existing range of RPM of the engine, out put voltage 415 volt and testing all as per the direction of the engr-in-charge.

M&L Dismantling the alternator of DG set of capacity 50 KVA from its base by using chain and pulley after removing the coupling with the engine, removing all nut, bolt with washer and all electrical connections of the alternator, shifting the alternator to work shop by crane and vehicle, opening into parts, checking all winding like main stator/rotor winding, exciter stator/rotor winding. Rewinding the main rotor and exciter rotor by using the "F" class insulation and existing gauge and type of magnet wire that was on the original motor, varnishing, heating, drying, greasing the bearings including replacement of unserviceable bearings, Re-fixing the complete including connection to the terminal box of the alternator at work shop and shifting the same to the site, Fixing the alternator to its base carefully by using chain and pulley, connecting it with existing engine including checking the alignment of alternator with the engine, connecting all electrical connections of the alternator and testing the DG set on "OFF/FULL LOAD", matching to the existing range of RPM of the engine, out put voltage 415 volt and testing all as per the direction of the engr-in-charge.

Taking down self starter assembly of DG set 12 volt from the existing position, opening in to parts, sort out the unserviceable items like carbon brush, pinion etc. and replace the same with new one including rewinding of field coils, re-assembling and re-fixing the same in its original position including to and fro conveyance charges to work shop and testing and all as per the direction of the engr-in-charge.

Taking down water pump assembly from the existing position, opening into parts overhauling the same with replacement of water pump repair kit, ball bearing (1No) (Make SKF/NBC), water pump, gasket seal, oil seal and re-assembling and re-fixing on the base for the capacity 75 to 125 KVA DG sets and all as per the direction of the engr-in-charge.

Taking down the Dynamo 12/24 Volts from the existing position, shifting to the work shop and back , opening into parts, cleaning to sort out the unserviceable parts, replace by new one, rewinding and varnishing, heating of coil, reassembling and re-fixing to its base including to and fro conveyance charges for work shop to the site for any capacity of DG and all as per the direction of the engr-in-charge.

Dismantling fuel injection pump (FIP) of DG set carefully, opening in to parts, for maintenance, servicing, tuning by overhauling and calibration up to 6 cylinders, adjustment of nozzle pressure and other controls, replacement of unserviceable spares, re-fixing the FIP on its original position including to and fro charges to thr work shop and all as per the direction of the engr-in-charge.

Supply & Fixing LED flood Light comprising of aluminium die cast body housing,IP 66 high bay light with high power LED's as light sourse suitable for architectural features or retail space of capacity 120 W (not less than 100 lumen/watt output) all as per cat part LHELANU7PG6J120 of Havells or equal including bracket for mounting flood lights with suitable clamps and nut and bolts and washers etc including connecting from pole/box to street light to be fixed at height of 9-11m on concerte pole all as specified.

Supply & Fixing LED flood Light comprising of aluminium die cast body housing,IP 66 high bay light with high power LED's as light sourse suitable for architectural features or retail space of capacity 120 W (not less than 100 lumen/watt output) all as per cat part LHELANU7PG6J120 of Havells or equal including bracket for mounting flood lights with suitable clamps and nut and bolts and washers etc including connecting from pole/box to street light all as specified to be fixed at height of 15-20m on high mast poles.

Supply & Fixing new generation LED post top lantern energy saving, environmental friendly,long life asethetically designed with symetrical light distribution, spun aluminium landscap lumanier with high power LED's as light source of capacity 40Watts (not less than 100 lumen/watt output) all as Cat part LHEVBGP7PN6k040 of make Havells or equivalent make suitable to mount on min 32 mm dia GI tube as post including three core copper cable of size 2.5 sqmm with suitable length.

Supply and fixing of LED Post top globestar made up of unbreakable poly carbonate suitable for mounting on pole of capacity upto 14 watts with LED light 6 Watts and holder Make Havells or equivalent all as specified and directed.

Supply and laying in trenches through pipe under culvert or in air cable XLPE insulated PVC sheathed heavy duty 1100 volts grade stranded aluminum conductor size 10 Sqmm 4 core complete specified and directed.(Note –necessary excavation and returning filling ,sand cushioning and bricks protection shall be measured and paid separately under respective item of schedule.

Supply and laying in trenches through pipe under culvert or in air cable XLPE insulated PVC sheathed heavy duty 1100 volts grade stranded aluminum conductor size 16 Sqmm 4 core complete specified and directed.(Note –necessary excavation and returning filling ,sand cushioning and bricks protection shall be measured and paid separately under respective item of schedule.

Supply and laying in trenches through pipe under culvert or in air cable XLPE insulated PVC sheathed heavy duty 1100 volts grade stranded aluminum conductor size 6 Sqmm 2 core complete specified and directed.(Note –necessary excavation and returning filling ,sand cushioning and bricks protection shall be measured and paid separately under respective item of schedule.

Supply & erection of new Pre stressed concrete pole,9.0 Mtr Long 102mm x 172mm at top and 102mm x 279 at bottom, class 10 including writing pole numbers and making five numbers black & yellow strips of 30 cm each upto 1.5 mtr height above the coping,including making connection of conductor as per existing all as specified and directed. Note :- Earth work, PCC for foundation and coping work shall be measured and paid for separately.

Supply only synthetic insulating mat for various Power supply installation of size 2M x 1M x 03 mm all as specified and directed

Supply and fixing in repair of automatic street light control switch single phase 5-8 KW 40 Amps using infrared sensor based nature switch for automatic switching of street lights. Nature switch operation should be based on Natural light lux level. The sensor along with suitable power contactors and incoming out going MCBs should be enclosed pole/wall mounted thermo plastic polycarbonate enclosure conforming to IP 66 protection class 2. Make: Nature switch: Kakatiya Energy systems/BAJAJ/Healer Contactors: BCH/L&T/Schneider MCBs: Hager/Schneider/L&T Enclosure: Hensel/GE or equivalent Circuit wiring: Polycab/ Finolex or equivalent

Supply and fix as in replacement Power contactor 3 pole with coil voltage 230 V of capacity upto 63 Amps suitable for street light timer complete all as specified and directed Make:Legrand/L&T/Schneider

Earthing complete with Galvanized steel earth plate 600 x 600 x 6.0 mm buried directly in ground (earth pit not less then 2.25 Mtr deep below ground level) with top edge of the plate not less then 1.5 Mtr below normal ground level connected to GI earth lead of 4 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel incl excavation and earth work, GI pipe light grade 25mm/40 mm bore for protection of GI wire /strip from earth electrode supplying and lying charcoal dust, common salt, PCC 1:3:6 type CI (using 20 mm graded crushed stone aggregate) as in chamber and MS angle iron frame 40 x 40 x 3mm and RCC cover 40 mm thick 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) reinforced with 8 mm dia. TMT bars @ 75mm c/c both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No. 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed

M &l for PCC 1:4:8 TYPE D-2 using 40 mm graded broken stone aggregate as in mass concrete in foundations etc . complete all as specified and directed.

M&L for PCC 1:2:4 typeB-1 using 20 mm graded broken stone aggregate as in mass concrete in foundations etc complete all as specified and directed .

Suppy and fix Rigid non-metallic PVC conduit 20 mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers,lock nuts,saddles,pipe hooks etc.

Supply and fixing street light junction box of size 250 mm x 200 mm x 100 mm, made out of hot press moulded SMC with weather proof hinged door including self locking arrangement, out door type weather and vermin proof complete comprising of insulated / high quality PVC sleeves aluminium bus bar of capacity 63 Amps 04 Nos (three phase RBY and black for neutral) with and including 6 Apms MCB single pole, single phase 230 volts, including 25 x 3 mm flat iron mounted on insulators, having arrangement of connecting incoming and outgoing cables complete and all as specified and directed.

Supply and fixing street light junction box of size 140 mm x 140 mm x 95 mm, made out of hot press moulded SMC with weather proof hinged door including self locking arrangement, out door type weather and vermin proof complete comprising of insulated / high quality PVC sleeves aluminium bus bar of capacity 63 Amps 04 Nos (three phase RBY and black for neutral) with and including 6 Apms MCB single pole, single phase 230 volts, including 25 x 3 mm flat iron mounted on insulators, having arrangement of connecting incoming and outgoing cables complete and all as specified and directed.

Supply and fixing of MCB 6 A to 32 Amps,240 Volts single pole fix in position where directed, complete all as specified and directed.

Material and labour for boring under road by means of using trenchlesss technology manually,with and including GI pipe light grade of 80 mm dia with all fittings for passing through of UG cable/pipes etc all as specified and directed.

Supply and fixing PVC insulated copper cable 2.5 sqmm three core multistanded flexible 1100 volts complete all as specified and directed

Supply and fixing of 1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor of size 10 Sqmm X 2 Core served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 Mtrs apart including 4 mm suspension wire one twin core cable flat or circular complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtrs wide and not exceeding 1.5 mtrs in depth for laying of cables including getting out in any kind of soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtrs wide and beyond 1.5 mtrs in depth for erection of PCC pole including getting out in any kind of soil complete all as specified and directed.

Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

Sand cushioning for cables all as specified and directed .(punned layer measured only)

Supply and laying un-reiforced precast concret cable cover class LV type-1 Size 250mm X 150mm X 40mm all as specified and directed

M & L for GI tubing light grade 40 mm bore complete with all fittings like bends, sockets, elbows and fixing clamp of suitable size for passing through cables under the floor, along the wall or along the pole complete all as specified and directed.

S & F as in replacement brackets 1.2 m long made to shape fabricated out of GI pipe Light grade ISI marked 40 mm dia incl provn of socket nipple welded at once end to suit the light fitting and fix to pole including clamps with nuts and bolts of suitable size cutting, drilling and welding its fix to pole and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed

Day to day complaints of street lights of various type for working height varies from 9m to 15m in the juridiction of AGE E/M, GE (N) Patiala within 15 km radious incl removing carbon from LED light connection by deploying dedicated team having the experience in the same field. Contractor has to provide all required Tool and plants for street light fault rectification. Contractor will make record of all given complaints and rectified complaints updated on daily basis. Street light complaints should be rectified within 24 hrs after intimation via any communication mode. Contractor is to collect serviceable lights from E/M stores and deposit U/S LED lights back to store. If the comaplint is not rectified within stipulated time contractor will bear penulty of Rs 100 per day per complaint.

Arun enterprises

m/s s.n. builders

Swami Engineers