CIVIL WORK FOR SCADA SYSTEM FOR RESERVOIR OPRATION AT PUMP HOUSE OF SHANKARROJI CHAVAN VISHNUPURI PROJECT .

Amount

Item No.1 :- Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete. I.No.BDW 8/ 46.19 P.No.215

Item No.2 :- Removing doors and windows with frame sand stacking the materials as directed with all leads, lifts etc. complete. I.No.BDW 8/ 46.15 P.No.215

Item No.3 :- Removing old paint from steel and other metal surfaces and making the surfaces even with hand scrapping, scaffolding etc. complete. No.BDO 8B/35.18 P.No.165

Item No.4 :- Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. No.BDW 8, 46.09 P.No.215

Item No.5 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) BDF 6 I.No.25.50 P.No.135

Item No.6 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. BDF17 I.No.26.33 P.No.139

Item No.7 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete BDG5 I.No.27.05 P.No.144

Item No.8 :- Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc.complete.BDL-2A I.No.32.04 P.No.153

Item No.9 :- Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc.complete. BDA-11/ 21.37 P.No.117

Item No.10 :- Providing and fixing European type white glazed earthen ware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe upto the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32mm dia.UPVC flush pipe with fittings and clamps, 20mm dia. UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley, with water Jet and fitting including cutting and making good to the walls and floors testing etc.complete. (prior approval of sample and brand by Ex. Engineer is necessary before use) I.No.BDV-21/43.19 P.No.210

Item No.11 :- Providing and fixing White Glazed Earthen ware fulls tall type Urinal with P.V.C. flushing cistern of 5 liter scapacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connection upto the outside face of the wallI. No.BDV-23 /41.57 P.No.198

Item No.12 :- Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc.complete. b) Both side polish BDM-35/33.337 P.No.158

Item No.13 :- Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 63 x 45 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. BDV /41.70 P.No.199

Item No.14 :- Providing and laying vitrified mirror/ glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to10 mm thickness and confirming to IS.15622-2006 (group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. BDM-12 /33.41 P.No.159

Item No.15 :- Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter of 8 to10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622-2006 (GroupBla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc .complete. I.No.33.61 P.No.161

Item No.16 :- Providing and fixing green marble of 18 to 20 mm thick for door frame /dado /window boxing etc.On C.M.1:6 including filling joints with polymer base filler nosing /moulding the sharp edges wherever necessary, curing, etc. complete. BDM-12 I.No.33.48 P.No.160

Item No.17 :- Solid Core Flush door Double leaf Providing and fixing factory made solid core flush door shutters in double leaves 35 mm thick, decorative type of exterior grade, as per detailed drawings ,conforming toI.S.:2202–1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stopper sand finishing with french polishing etc. (Excluding door frame) (Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutter. BDR I.No.51.61 P.No.268

Item No.18 :- Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. BDT34 I.No.39.09 P.No.179

Item No.19 :- Providing and fixingin position. (asperI.S.1868/1982) Aluminium sliding window of two tracks with rectangular pipe having over all dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram /Running metre and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/ Running metre.Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram /Running metre.The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/ Running metre. Interlocking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/ Runningmetre and handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/ Running metre and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram /Running metre as per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixture sand fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour anodising with box. BDT I.No.39.37 P.No.183

Item No.20 :- Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595 mm x 595 mm having 15 mm thick densified micro look edge and 100% humidity resistance incombustible as per BS 46 part IV and thermal conductivity 0.043 w/m 0K Cand NRC 0.50 placed in true horizontal level suspended grid of size 600 x 600 mm made from hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/ black), where in, main Trunner of size 42 mm x 14mm between maintee 600 mm center-to center and secondary cross T of size 33 x 14 x 0.43 mm thick of length 600 mm long spacedinter-locked at middle of the first crossed T in each panel to form grid of 1200 mm x 600 mm resting on periphery wall Profile wall section 19 mm (7+7) x 19 mm x 0.40 thicknesses and laying false ceiling for service slike diffusers grills including cutting, making opening for light fittings ,fixtures, ,smoke detectors etc. ,wherever required .Main T runners suspended from ceiling with using G.I. soffit cleats of size 25 x 35 x 1.6 mm of required length fixed to the ceiling with 6 mm dia and 50 mm long dash fastener, 4 mm dia G.I. adjustable rods with powder- coated/good quality G.I. level adjustment clips of 35x35x0.8mm spaced BDR I.No.38.40 P.No.175

Item No.23 :- Providing and fixing hume pipe septic tank 900 mm diameter with vent pipe and cap including necessary (including excavation and laying) BDV-45 I.No.42.18 P.No.201

Item No.24 :- Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. BDV-46 I.No.42.19 P.No.201

Item No.25 :- Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. I.No. BDV-5 42.63 P.No.205

Item No.26 :- Providing and laying in trenches 20 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. I.No. BDV-5 42.62 P.No.205

Item No.27 :- Providing and laying in trenches 15 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. I.No. BDV-5 42.61 P.No.205

Item No.28 :- Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. I.No. BDV-8 /41.40 P.No.196

Item No.29 :- Providing and fixing 25 mm dia. Screw down bib/ stop tap of brass including necessary socket union nut complete. I.No. BDV-8 /41.42 P.No.197

Item No.30 :- Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery upto destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters I.No. BDV /42.53 P.No.204

Item No.31 :- Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.. BDO 8E I.No.35.21 P.No.165

Item No.32 :- Providing and applying plastic emulsion paint of approved quality,colour and shade to old surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete BDP-6A/ I.No.36.13 P.No.168

Item No.33 :- Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. BDO/ I.No.35.25 P.No.165

Item No.34 :- Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Wall stopre pare surface even and smooth of approved make, etc complete. BDL/ I.No.32.34 P.No.155

Item No.35 :- Providing & mixing liquid internal curing compound which is based on water soluble oxyethylenepolymer (OEP) for RCC, Shotcrete, mortar. The liquid shall be conforming to AS3799- 1998 for curing efficiency not less than 90 % & capable of improving workability ,pumpability ,impermeability ,full hydration of all types of cement essential for optimum strength development. The dose of liquid shall be average 1.25 % by weight of cement. The liquid is to be mixed with gauging water while mixing the concrete /motar /shortcrete. I.No.52.24 P.No.313

Item No.36 :- Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, flush type switch,earthing and required accessories as per specification No: WG-PW/SW(1-9-16)

Item No.37 :- Wiring forplug on board with Switch socket with copper wiring and earthingas per specification No:WG-PW/SW (1-9-13)

Item No.38 :- Point wiring for independent plug in PVC trunking (casingcapping) with 1.5 sq.m (2+1E) FR grade copper wire with flush type switch and required accessories as per specification No: WG-PW/SW. (1-9-18)

Item No.39 :- Supplying & erecting mains with 2x2.5 sq.mm.and earth wire 1.5 sq.mm FR PVC copper wire, in rigid PVC conduit min. 20mm dia,as per specification No: WGMA/PC, para no. 1.4.1 (1-6-3)

Item No.40 :- Supplying & erecting mains with 2x4 sq.mm.and earth wire 2.5 sq.mm FR PVC copper wirein rigid PVC conduit min .20mm dia,as per specification No: WG-MA/PC, para no.

Item No.41 :- Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB.(5-3-2)

Item No.42 :- Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB.(5-3-6)

Item No.43 :- Providing earthing with Copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification No.EA-EP.(9-1-2)

Item No.44 :- Supplying and erecting exhaust fan heavy duty 230 V, A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF(2-12-16) P.No.43

Item No.45 :- Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with olycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary.(2-10-14)

Item No.46 :-Supplying & erecting 18W, 230V integral type LED Lamp suitable for B-22/E-27 base. (2-10-13)

Item No.47 :- Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF.(2-12-3)

Item No.48 :- Supplying, installing, testing and commissioning split type room Air conditioning unit with variable speed Inverter technology 2.5 TR capacity with R410A/R32 refrigerant & copper condenser suitable to operate on 230/415V, 50cycles, A.C. supply having 1 no. of air handling unit (Mega spilt) Hi-wall mounting type complete at position. specification no. AP-AC/SACF.(3-2-13)

Item No.49 :- Supplying and erecting submersible pump set suitable for erection on open well of 2.25 KW/3 HP with 415 V 50 c/s.A.C. supply, having delivery head from 21 to 7 m and discharge from 200 to 800 Itrs. per minute (Max efficiency at 16 m head & 500 Itr discharge) & pipe of Suction 50mm /Delivery 50 mm diameter erected with necessary H type clamps as per specification no. WP-OSP.(12-3-1) P.No.217

Item No. 50 :- Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ SquareMetre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Item No. 51 :- Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S.Angles ( 50mm x 50mm x 6mm) at 2.5 Metres, Center to center including excavating pits for foundqtion, fixing post in cement cocnrete 1:4:8 of size 45 x 45 x 45 cm fastening the wire and painting the M.S.Angles with one coat of red lead primer and two coats of painting etc.complete. I.No.BDW-3 /46.44 P.No.217

Item No. 52 :- Providing and fixing 50mm.dia. medium class G.I.pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c.block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete.I No.BDC /23.05 P.No.129

Item No.53:-Conference Table @ 3600L x 1400D x 750HT Providing & Fixing of Main Table @ 3600L x 1400D x 750HT-made up of 18+18mm Thick MDF to p with PVC Membrane finish an dwater fall edge profile. Aluminium Anodizied finish beeding of 4mm thich is running all over the table top edge. Gable ends is Aer of oiled Shape with front edges in PVCM embrane finish and rest in Prelaminated MDF with batton structure. Gable ends should be hollow from in side for the provision of passing electrical and Datawiring.,MODESTY PANEL:-to be made of s18mm thick Prelaminated particle board with PVC edge band Access Flap:- For Wire manager 2 Nos.

Item No.54 :- Conference Table @ 1800 x 900 x 750 mm Ht.Providing &Fixing of Main Table @ 1800L x 900D x 750HT-made up of 18+18mm Thick MDF top with PVC Membrane finish and water fall edge profile. Aluminium Anodizied finish beeding of 4mm thich is running all over the table top edge. Gable ends is Aer of oiled Shape with front edges in PVC Membrane finish and restin Prelaminated MDF with batton structure. Gable ends should be hollow from in side for the provision of passing electrical and Datawiring.,MODESTY PANEL:-to be made of 18mm thick Prelaminated particle board with PVC edge bandAccess Flap:- For Wire manager 1 Nos.complete.I No.51.32 P.No.259

Item No.55 :- Providing & Arrangemnt of Mid Back, Normal Syncro Mechanism, Fixed Armrest, Gaslift for Sea the ight adjustment, Standard 5-prong/Nylon Base with Leather Upholstery I.No-51.42 P.No.260

Item No.56 :- Sofa Set 3+1+1 Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms) Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat.complete.I No.51.53 P.No.266