MAINTENANCE/REPAIR AND REPLACEMENT OF CI/GI PIPE AT VARIOUS INSTALLATIONS OF WATER SUPPLY UNDER AGE E/M WS AT GE(U) E/M MEERUT CANTT

Amount

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes, laying of pipe and cables etc. but not exceeding 10 sqm on plan including dressing/trimming sides and levelling/grading & ramming bottom of excavation and getting out in soft/loose soil complete all as specified.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations, laying of pipe and cables etc or for shafts, well cess pits, manholes,pier holes not exceeding 10 sqm on plan ,.including dressing/trimming sides and levelling/grading & ramming bottom of excavation and getting out in hard/dense soil complete all as specified.

Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

S&F 200mm nominal bore , Cast iron pipes with spigot and socket ends centrifugally cast , class LA, in any length , laid in trenches, suiatble for lead joints complete all as specified. Note: Lead Joints shall be measured and paid separately)

S&F 150mm nominal bore , Cast iron pipes with spigot and socket ends centrifugally cast , class LA, in any length , laid in trenches, suiatble for lead joints complete all as specified. Note: Lead Joints shall be measured and paid separately)

S&F 100mm nominal bore , Cast iron pipes with spigot and socket ends centrifugally cast , class LA, in any length , laid in trenches, suiatble for lead joints complete all as specified. Note: Lead Joints shall be measured and paid separately)

S&F 80mm nominal bore , Cast iron pipes with spigot and socket ends centrifugally cast , class LA, in any length , laid in trenches, suiatble for lead joints complete all as specified. Note: Lead Joints shall be measured and paid separately)

M&L Cast iron fittings for spigot socketed pipes upto 150mm nominal bore such as Bends ( any type, radius and angle) Tapers any type, ( straight , bend, increasing, decreasing or double socket etc.) Tee pieces single branch , 'Y' junction, double branch , cross ( all sockets or socket and spigot ) collars, caps and plugs (Joints and jointing materials shall be measured separately)

M&L Cast iron fittings for spigot socketed pipes 200mm to 300mm nominal bore such as Bends ( any type, radius and angle) Tapers any type, ( straight , bend, increasing, decreasing or double socket etc.) Tee pieces single branch , 'Y' junction, double branch , cross ( all sockets or socket and spigot ) collars, caps and plugs (Joints and jointing materials shall be measured separately)

M&L Cast iron fittings for flanged end pipes upto 150mm nominal bore such as Bends ( any type, radius and angle) Tapers any type, ( straight , bend, increasing, decreasing or double socket etc.) Tee pieces single branch , 'Y' junction, double branch , cross ( all sockets or socket and spigot ) collars, caps and plugs (Joints and jointing materials shall be measured separately)

M&L Cast iron fittings for flanged end pipes 200mm nominal to 300mm nominal bore Connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth (Joints and jointing materials shall be measured separately)

M&L rubber tyton joints for Spigot and socketed pipes and fittings of 200mm bore complete all as specified and directed.

M&L rubber tyton joints for Spigot and socketed pipes and fittings of 150mm bore complete all as specified and directed.

M&L rubber tyton joints for Spigot and socketed pipes and fittings of 100mm bore complete all as specified and directed.

Dismantling/ taking down flanged joint including rubber gasket, mild steel bots, nuts and washers and S&F rubber or fibre board gasket and mild steel nuts, bolts and washers suitable for 200mm nominal bore of pipe complete all as specified and directed.

Dismantling/ taking down flanged joint including rubber gasket, mild steel bots, nuts and washers and S&F rubber or fibre board gasket and mild steel nuts, bolts and washers suitable for 150mm nominal bore of pipe complete all as specified and directed.

Dismantling/ taking down flanged joint including rubber gasket, mild steel bots, nuts and washers and S&F rubber or fibre board gasket and mild steel nuts, bolts and washers suitable for 100mm nominal bore of pipe complete all as specified and directed.

Dismantling/ taking down flanged joint including rubber gasket, mild steel bots, nuts and washers and S&F rubber or fibre board gasket and mild steel nuts, bolts and washers suitable for 80mm nominal bore of pipe complete all as specified and directed.

S&F Long length CI Detachable joint complete with nuts, bolts , washers and rubber ring ( set) suitable for 200mm nominal bore CI /DI pipe complete all as specified.

S&F Long length CI Detachable joint complete with nuts, bolts , washers and rubber ring ( set) suitable for 150mm nominal bore CI /DI pipe complete all as specified.

S&F Long length CI Detachable joint complete with nuts, bolts , washers and rubber ring ( set) suitable for 100mm nominal bore CI /DI pipe complete all as specified.

S&F Long length CI Detachable joint complete with nuts, bolts , washers and rubber ring ( set) suitable for 80mm nominal bore CI /DI pipe complete all as specified.

S&F short length CI Detachable joint complete with nuts, bolts , washers and rubber ring ( set) suitable for 200mm nominal bore CI /DI pipe complete all as specified.

S&F short length CI Detachable joint complete with nuts, bolts , washers and rubber ring ( set) suitable for 150mm nominal bore CI /DI pipe complete all as specified.

S&F short length CI Detachable joint complete with nuts, bolts , washers and rubber ring ( set) suitable for 100mm nominal bore CI /DI pipe complete all as specified.

S&F short length CI Detachable joint complete with nuts, bolts , washers and rubber ring ( set) suitable for 80mm nominal bore CI /DI pipe complete all as specified.

Taking up cast iron 200mm dia water mains ( including all fittings ), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified.

Taking up cast iron 150mm dia water mains ( including all fittings ), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified.

Taking up cast iron 100mm dia water mains ( including all fittings ), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified.

Taking up cast iron 80mm dia water mains ( including all fittings ), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified.

M&L 200mm nominal bore ductile iron pipes with spigot and socketed ends , centrifugally cast(spun) , class K9, in any length , exteranlly coated with metalic Zinc Coating finished with bituminous paint and internally cement mortar lining laid in trenches/ fixed to walls or under floors etc. and testing complete all as specified of the following bore:- Note :- Excavation, earthwork and FI clamps shall be measured and paid separately)

M&L 150mm nominal bore ductile iron pipes with spigot and socketed ends , centrifugally cast(spun) , class K9, in any length , exteranlly coated with metalic Zinc Coating finished with bituminous paint and internally cement mortar lining laid in trenches/ fixed to walls or under floors etc. and testing complete all as specified of the following bore:- Note :- Excavation, earthwork and FI clamps shall be measured and paid separately)

M&L 100mm nominal bore ductile iron pipes with spigot and socketed ends , centrifugally cast(spun) , class K9, in any length , exteranlly coated with metalic Zinc Coating finished with bituminous paint and internally cement mortar lining laid in trenches/ fixed to walls or under floors etc. and testing complete all as specified of the following bore:- Note :- Excavation, earthwork and FI clamps shall be measured and paid separately)

S&F ductile iron spigot and socketed ends specials, fittings for spigot and socketed pipes for water main line such as bend any type any radius, single tapped taper, 'TEE' pieces, double branch, collar, caps, plug, Class K12, pressure rating PN16 complete all as specified and directed. (Jointing and jointing materials measured and paid separately)

M&L for Cutting of existing 80mm nominal bore cast iron pipes and reducing to required length in position for insertion of new tees, branches , etc complete all as specified and directed. Note: Fittings shall be measured and paid separately under appropriate item(s).

M&L for Cutting of existing 100mm nominal bore cast iron pipes and reducing to required length in position for insertion of new tees, branches , etc complete all as specified and directed. Note: Fittings shall be measured and paid separately under appropriate item(s).

M&L for Cutting of existing 150mm nominal bore cast iron pipes and reducing to required length in position for insertion of new tees, branches , etc complete all as specified and directed. Note: Fittings shall be measured and paid separately under appropriate item(s).

M&L for Cutting of existing 200mm nominal bore cast iron pipes and reducing to required length in position for insertion of new tees, branches , etc complete all as specified and directed. Note: Fittings shall be measured and paid separately under appropriate item(s).

M&L for Cutting of existing 250mm nominal bore cast iron pipes and reducing to required length in position for insertion of new tees, branches , etc complete all as specified and directed. Note: Fittings shall be measured and paid separately under appropriate item(s).

Repairing of leaked run lead joints by burning out lead from joints of 200mm bore of pipe in position including M&L for providing new lead joint including testing complete including necessary excavation and earthwork all as specified. ( Old retrived run lead shall not be reused)

Repairing of leaked run lead joints by burning out lead from joints of 150mm bore of pipe in position including M&L for providing new lead joint including testing complete including necessary excavation and earthwork all as specified. ( Old retrived run lead shall not be reused)

Repairing of leaked run lead joints by burning out lead from joints of 100mm bore of pipe in position including M&L for providing new lead joint including testing complete including necessary excavation and earthwork all as specified. ( Old retrived run lead shall not be reused)

Repairing of leaked run lead joints by burning out lead from joints of 80mm bore of pipe in position including M&L for providing new lead joint including testing complete including necessary excavation and earthwork all as specified. ( Old retrived run lead shall not be reused)

Repairing of leaked run lead joints by burning out lead joint from joints of 200mm bore of pipe in position including and M&L for providing new lead wool joint including testing complete including necessary excavation and earthwork all as specified.

Repairing of leaked run lead joints by burning out lead joint from joints of 150mm bore of pipe in position including and M&L for providing new lead wool joint including testing complete including necessary excavation and earthwork all as specified.

Repairing of leaked run lead joints by burning out lead joint from joints of 100mm bore of pipe in position including and M&L for providing new lead wool joint including testing complete including necessary excavation and earthwork all as specified.

Repairing of leaked run lead joints by burning out lead joint from joints of 80mm bore of pipe in position including and M&L for providing new lead wool joint including testing complete including necessary excavation and earthwork all as specified.

M&L 80mm nominal bore mild steel galvanised water tubing, medium grade with all fittings like bends, elbows, Tee, reducers, sockets, unions etc laid in trenches complete all as specfied and directed.

M&L 50mm nominal bore mild steel galvanised water tubing, medium grade with all fittings like bends, elbows, Tee, reducers, sockets, unions etc laid in trenches complete all as specfied and directed.

M&L 40mm nominal bore mild steel galvanised water tubing, medium grade with all fittings like bends, elbows, Tee, reducers, sockets, unions etc laid in trenches complete all as specfied and directed.

M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade (ISI) marked , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade (ISI) marked , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

M&L 25 mm nominal bore Mild steel galvanised water tubing , medium grade (ISI) marked , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal, 15 mm bore all as specified.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal , 20 mm bore all as specified.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 25 mm bore all as specified.

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 40mm bore pipe complete all as specified.

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 50mm bore pipe complete all as specified.

Taking out old unserviceable GI pipes, laid in trenches or under floors or fixed to walls including all fittings and disconnecting from branch connections complete all as specified and directed for 80mm bore pipe complete all as specified.

Taking down of existing unserviceable gate valve and S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 50 mm bore dia. iron pipe and fixed complete all as specified.

Taking down of existing unserviceable gate valve and S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 40 mm bore dia. iron pipe and fixed complete all as specified.

Taking down of existing unserviceable gate valve and S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore dia. iron pipe and fixed complete all as specified.

Taking down of existing unserviceable gate valve and S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe and fixed complete all as specified.

Taking down of existing unserviceable gate valve and S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 15 mm bore dia. iron pipe and fixed complete all as specified.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 15 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 15mm-142 gms.) complete all as specified.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 20mm-210 gms.) complete all as specified.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 20mm-210 gms.) complete all as specified.

Taking down of existing unserviceable PTMT Bib taps S&F Bib taps standard of PTMT any colour screwed, for iron pipe and fixed ( Minimum weight 20 mm- 125 gms complete all as specified.

Taking down of existing unserviceable Reflux valve (NRV) of any pattern and S&F Cast Iron Reflux valve (NRV) Single door pattern with Bye pass arrangement,Class PN 1.6, both end flanged, suitable for 200mm bore pipe, Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

Taking down of existing unserviceable Reflux valve (NRV) of any pattern and S&F Cast Iron Reflux valve (NRV) Single door pattern with Bye pass arrangement,Class PN 1.6, both end flanged, suitable for 150mm bore pipe, Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

Takingout old wornout gland packing rope and Supplying and filling of superior quality and suitable size of gland packing rope of various sizes of sluice valve complete all as specified. Note: Unserviceable Bolts, nuts and washers of gland plate shall be measured and apid separately.

Taking down of existing unserviceable stainless steel spindle (stem) with gunmetal Gutka (wedge) of sluice valve of 200mm bore and S&F stainless steel spindle with gunmetal Gutka including necessary cleaning of sluice valve complete all as specified.

Taking down of existing unserviceable stainless steel spindle (stem) with gunmetal Gutka (wedge) of sluice valve of 150mm bore and S&F stainless steel spindle with gunmetal Gutka including necessary cleaning of sluice valve complete all as specified.

Taking down of existing unserviceable stainless steel spindle (stem) with gunmetal Gutka (wedge) of sluice valve of 100mm bore and S&F stainless steel spindle with gunmetal Gutka including necessary cleaning of sluice valve complete all as specified.

Taking down of existing unserviceable stainless steel spindle (stem) with gunmetal Gutka (wedge) of sluice valve of 80mm bore and S&F stainless steel spindle with gunmetal Gutka including necessary cleaning of sluice valve complete all as specified.

Taking down of existing unserviceable sluice valve including rubber gaskets and mild steel bolts, nuts and washers and S&F Cast Iron sluice valve 200mm dia,Class PN 1.6 with iron wheel head both end flanged , non rising type with stainless steel spindle complete with Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

Taking down of existing unserviceable sluice valve including rubber gaskets and mild steel bolts, nuts and washers and S&F Cast Iron sluice valve 150mm dia,Class PN 1.6 with iron wheel head both end flanged , non rising type with stainless steel spindle complete with Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

Taking down of existing unserviceable sluice valve including rubber gaskets and mild steel bolts, nuts and washers and S&F Cast Iron sluice valve 100mm dia,Class PN 1.6 with iron wheel head both end flanged , non rising type with stainless steel spindle complete with Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

Taking down of existing unserviceable sluice valve including rubber gaskets and mild steel bolts, nuts and washers and S&F Cast Iron sluice valve 80mm dia,Class PN 1.6 with iron wheel head both end flanged , non rising type with stainless steel spindle complete with Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed . ( Mild steel nuts, bolts, washers, gasklets shall be deemed included in unit rate.)

Renewal of Hot drawn steel half / full threaded bolts of suitable size having hexagonal head with one 3 mm thick washer and nut of any dia and length for jointing flanged pipes / fittings complete all as specified.

Making holes/ bores in GI water mains including cutting of pipe where required for making branch connection of 25mm core for alterations or additions ( or lengthening screw on pipe to form connector) and providing clamp made out of FI 50x6mm duly fitted with GI socket and GI nipple and tightening with mild steel nuts, bolts and washers etc. complete all as specified.

Making holes/ bores in GI water mains including cutting of pipe where required for making branch connection of 20mm core for alterations or additions ( or lengthening screw on pipe to form connector) and providing clamp made out of FI 50x6mm duly fitted with GI socket and GI nipple and tightening with mild steel nuts, bolts and washers etc. complete all as specified.

Taking down of existing wornout GI union from GI pipe line and S&F GI union suiatble for 50mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI union from GI pipe line and S&F GI union suiatble for 40mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI union from GI pipe line and S&F GI union suiatble for 25mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI union from GI pipe line and S&F GI union suiatble for 20mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI union from GI pipe line and S&F GI union suiatble for 15mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI nipple from GI pipe line and S&F 150mm long GI nipple madeout of medium grade pipe of required length suitable for 50mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI nipple from GI pipe line and S&F 100mm long GI nipple madeout of medium grade pipe of required length suitable for 50mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI nipple from GI pipe line and S&F 75mm long GI nipple madeout of medium grade pipe of required length suitable for 50mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI nipple from GI pipe line and S&F 150mm long GI nipple madeout of medium grade pipe of required length suitable for 40mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI nipple from GI pipe line and S&F 100mm long GI nipple madeout of medium grade pipe of required length suitable for 40mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI nipple from GI pipe line and S&F 75mm long GI nipple madeout of medium grade pipe of required length suitable for 40mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI nipple from GI pipe line and S&F 150mm long GI nipple madeout of medium grade pipe of required length suitable for 25mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI nipple from GI pipe line and S&F 100mm long GI nipple madeout of medium grade pipe of required length suitable for 25mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI nipple from GI pipe line and S&F 75mm long GI nipple madeout of medium grade pipe of required length suitable for 25mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI nipple from GI pipe line and S&F 150mm long GI nipple madeout of medium grade pipe of required length suitable for 20mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI nipple from GI pipe line and S&F 100mm long GI nipple madeout of medium grade pipe of required length suitable for 20mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI nipple from GI pipe line and S&F 75mm long GI nipple madeout of medium grade pipe of required length suitable for 20mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI nipple from GI pipe line and S&F 150mm long GI nipple madeout of medium grade pipe of required length suitable for 15mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI nipple from GI pipe line and S&F 100mm long GI nipple madeout of medium grade pipe of required length suitable for 15mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI nipple from GI pipe line and S&F 75mm long GI nipple madeout of medium grade pipe of required length suitable for 15mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI socket from GI pipe line and S&F GI socket suitable for 50mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI socket from GI pipe line and S&F GI socket suitable for 40mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI socket from GI pipe line and S&F GI socket suitable for 25mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI socket from GI pipe line and S&F GI socket suitable for 20mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI socket from GI pipe line and S&F GI socket suitable for 15mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI Tee from GI pipe line and S&F GI equal Tee suitable for 50mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI Tee from GI pipe line and S&F GI equal Tee suitable for 40mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI Tee from GI pipe line and S&F GI equal Tee suitable for 25mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI Tee from GI pipe line and S&F GI equal Tee suitable for 20mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI Tee from GI pipe line and S&F GI equal Tee suitable for 15mm nominal bore of pipe complete all as specified.

Taking down of existing wornout GI reducer from GI pipe line and S&F GI reducer suitable for 65mmx25mm nominal bore of pipe complete all as specified.

rajendra agrawal