SITC of Fire Detection system

Amount

SITC of Microprocessor based 4 Loops fire alarm control panel fully networkable with each loop capable of taking 125 devices, 1/4 VGA display character alpha-numeric liquid crystal display.The panel shall be soft addressable type. The panel shall be able to give pin point location of all fire/fault conditions. Further, the panel must be able to automatically switch off respective control switches when ever any alarm is triggered The panel shall have in built rectifier, provision for external & internal printer (if required),Loop cards, LCD unit to indicate Fire/Fault Signal with address and analog output, complete in all respects, having 10000 event memory, integral SMF lead acid batteries with sealed cells of 24 V capable of running for a minimum of 2 hours with integral battery charger complete as required. (Make: Siemens Cerberus Pro / Securiton / Bosch).

SITC of EN -54 standard VDS/LPCB Approved Addressable Multi sensor Detector (optical smoke as well as heat ) with inbulit / additional isolator and integral LED status indicator with 360 degree viewing angle Detector shall commumcate 3 danger levels for differentiated alarm activation and high tolerance to dust dirt temperature fluctuation and air currents Detector should have unquie address for communication and assigned through panel with Mounting Base as rqequired with the protection category of IP40 (Approved Make: Honeywell / Bosch / Seoutron / Siemens).

SITC of Intelligent Addressable EN Standards & VDS Approved Heat (Fixed Temp + ROR Temp) Detector with Base & Necessary accessories for fitting, J.B etc. (Approved Make: Siemens Cerberus Pro/ Securiton / Bosch).

SITC of Intelligent Addressable EN Standards & VDS Approved Manual Call Point with Necessary accessories for fitting, J.B etc. (Approved Make: Siemens Cerberus Pro/ Securiton / Bosch).

SITC of EN Standards & VDS Approved Loop Powered Sounder cum Strobe with necessary accessories for fitting, J.B etc. (Approved Make: Siemens Cerberus Pro/ Securiton / Bosch).

SITC of Intelligent signal processing unit having Voltage free NO contact which would be connected in series with magnetic coil of AHU power supply unit. In case of Fire, the voltage free contact would close the circuit to isolate the power supply of AHU. (Approved Make: Siemens Cerberus Pro / Securiton / Bosch).

SITC of Response Indicator. (Approved Make: Siemens Cerberus Pro / Securiton / Bosch).

Supply & Laying of 1.1KV grade 2 Nos. 1.5 sq.mm PVC insulated flexible FRLS copper Cable (Make: Finolex / Technoflex / MEM / KEI) for Looping in PVC (Approve Make) conduit including Supply & Fixing of 20 mm complete with all accessories.

Supply & Laying of OFC for networking with PVC (Approve Make)conduit including Supply & Fixing complete with all accessories

SITC of Repeater Panel (VDS / UL approved) which will act as an add-on device for remote display of FACP status information of the FDA opearating front releated to the detectors and detectors zones.event messages are displayed via lED collective indicators.Display and opeartion of sections zones with in a building.Individual configurationof the sections and zones to be opearated and displayed via the floor reapeter terminal.Possible to display alarms,pre-alarms,technical messages,faults, isolations from the entire system. Acknoledgement and restting of events (Make: Siemens / Honeywell).

TERMS & CONDITIONS

(i) Rate should be quoted inclusive of all applicable taxes and Duties etc including GST. (ii) All materials, equipments & accessories must conform to relevant IS / IEC specifications. (iii) Necessary manufacturer's warranty certificate for Fire detection and Alarm system will have to be submitted during delivery of the material. (iv) The Fire detection and Alarm system must be warranted at least for 15 months from the date of Delivery / 12 months from the date of commissioning whichever is earlier.

MAM ENTERPRISE

GLYPTIC