SPECIAL REPAIR TO HARD STAND NEAR MAIN GATE FOR VEHICLE PARKING AND PROVN OF CERTAIN SANCTION WORKS AT MIL STN MT ABU UNDER AGE (I) UDAIPUR

Amount

Material and labour for surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil all as specified.

Material and labour for demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site ofm work as directed by the Engr-in-Charge.

Material and labour demolition of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc., complete all as specified.

Material and labour for Excavation in trenches n. exc. 1.5 M wide and n. exc. 1.5 M in depth & getting out in hard soil.

Material and labour for excavating in post holes (or similar holes) each n.exc0.5cum, getting out in hard rockl, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm thick and removing surplus soil to a distance n.exc.50m and making good surface, complete all as specified.

Material and labour plain cement concrete 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate) as in foundation filling and mass concrete complete all as specified.

M&L Cutting holes in brick walls built in cement or lime mortar depth of hole exceeding half brick thick but not exceeding one brick thick for inserting hold fasts,roof slab etc and making good dismatled portion in cement mortar (1:3) or cement concrete(1:2:4) type B-1 as required.

M&L for plain cement concrete type B-1, 1:2:4 (using 20 mm graded aggregate) in hardstanding and similar work etc including necessary formwork all as specified & directed

Material and labour for Forming 10mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A and thickness of concrete 100 to 150mm thick

M&L for Providing precast cement concrete type B-1, 1:2:4 (using 20 mm graded aggregate) in cover slabs and similar articles with plain faces USING ANGLE IRON MOULD FOR MAKING COVER SLAB with set in CM 1:6 and all as specified & directed

M&L cement concrete in Fdn filling incl mass concreting PCC (1:4:8) type D-2 using 40mm graded stone agg.

M/L damp proof course 40mm thick in plain cement concrete(1:2:4) type B-0 including necessary formwork and mixed with water proofing compound.

Returning, filling in incl spreading leveling, watering and well ramming in layer n.exc 25cm in layer in soft/loose soil.

Removing excavated material (soil) n.exc 50 meter and depositing where directed at a level n.exc 1.50m above the starting point.

M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15cm thick, water and rammed to a true surface.

M&L 75mm thick PCC as in sub base 1:4:8 type D-2 (using 40mm graded stone aggregate) all as specified.

M & L for 50 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished surface complete. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with partical board core, supplying & fixing in frame at site as per specification & drawing

Supply and fixing of M.S angle Iron door frame, grills/framed guard bars and similar work etc conforming to Fe.290.Gde-E-165

Supply and fixing roof trusses(framed ) trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee,angle, channel or flat section) including distances pieces cleats etc fixed in position conforming to Fe-410(Gde 250) complete all as specified and directed.

Supply and fixing steel work in tublar truss including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade st 240 etc confirming to fe-410-W (Gde-E-250) quality-A all as specified as directed.

S & F 0.50 mm thick galvalume aluminium zinc coating AZ-150 GI based corrugated steel coloured having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws at every alternate corrugation as specified etc.

M&L for machine pressed precast concrete interlocking paver block rubberised any shape & size conforming to IS- 15658 - 2006 of 60 mm thickness M-35 Grade with grey cement & pigment including 40 mm thick sand cushoining under paver block etc. complete all as specified.

S&F rolled mild steel sections conforming to Fe-290, Gde E-165 as framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc., complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including hand made sliding bolt, handle, either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165,all as specified and directed.

S&F butt hinges 100mm long stainless steel fixed with AI Frame

M&L Aluminium anodised, barrel tower bolts of extruded section and fixed 200mm long.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed .

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 etc complete all as spd and diredted.

M&L for keyed ponting to random rubble, uncoursed or brought up to course in CM 1:4 etc. complete all as spd and diredted.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 M mean radius built in CM 1:6.

Material and labour for 10 mm rendering in cement mortar (1:6) on other than fair faces of brick wall surfaces finished even and smooth without using extra cement.

Material and Labour for 15mm thick rendering on fair faces of brick work, concrete surfaces or stone walls in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions, finished even and fair, complete all as specified. Note : WPC shall be measured and paid separately.

Material and Labour for 15mm thick rendering on fair faces of brick work, concrete surfaces or stone walls in cement mortar 1:6, surface finished even and fair, complete all as spd.

Material and labour for 5 mm rendering in cement mortar (1:4) on other than fair faces of concrete/ceiling surfaces finished even and smooth without using extra cement.

Supply only liquid water proofing compound, ISI marked complete all as specified and directed.

M&L preparation of new surfaces of plaster or unplastered, & applying three coat of white washing on walls.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint. all as specified & directed.

M&L preparation of new surfaces of plaster or unplastered, & applying three coat of white washing on ceiling.

M&L, preparation of new or untreated steel surfaces of any description over 10cm in width or girth not otherwise described priming with red oxide and two subsequent coat of synthetic enamelled paint all as specified.

Supply and fixing in repair vitreous china semi pedestal pattern (anglo Indian type) water closet pan white colour with and including PVC white seat cover.

Supply and fixing in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S&F in repairs Jet spray for EWC including hinges. (Make-Jaquar Essco/Prayag/Coronet/Plummber)

Supply and fixing of PVC valve-less syphonic action type low level flushing cistern,10 litre capacity,white with inlet/outlet,ball valve,float and handle including brackets. complete.

Supply and fixing of cast iron (sand cast) soil,waste and vent pipe 100 mm bore, any length with or without ear with cement joint,fixed to walls.

Supply and fixing of CI bend 100 mm bore with oval accessories door.

Supply and fixing of CI Tee or single branch piece 100 mm bore with oval access door.

Supply and fixing of CI vent cowl 100 mm size.

Supply and fixing of SGSW gully trap 150 X 100 mm size square or round mouthed type ;P'

Supply and fixing of 100 mm CI Nahani trap with PTMT gratings(minimum weight 250 gm) including jointing to waste pipe fixed in cement concrete(1:2:4) type B1 all as specified and directed.

Supply and fixing of stop valve cast copper alloy,chromium plated,fancy type concealed type of size 15 mm bore. (Make-Jaquar Essco/Prayag/Coronet/Plummber)

Supply and fixing of bib tap cast copper alloy,chromium plated, fancy type of size 15 mm bore.(Make-Jaquar Essco/Prayag/Coronet/Plumber)

Supply and fixing of gun metal gate valve with iron wheel head,screwed both ends for iron pipe and fixed of size 20 mm bore.(Make-Zoloto/Leader/NMC)

Supply and fixing of rotational moulded HDPE water storage tank 500litre capacity, White weight not less than 18 kg (cylindrical vertical with closed top) Tripple layers, ISI marked, hoisted and fixed in position complete.

Supply and fixing of PTMT float valve,high pressure with polythene float and fly nut,screwed for iron pipe or brass ferrule of size 20 mm complete.(Make-Prayag/Polytuf)

Supply and fixing of chromium plated tubular towel rail 20 mm dia, 60 cm long 'D' type.

Material and labour for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over & including 15mm screed bed layer in CM 1:6 all as specified & directed.

Material and labour for glazed ceramic coloured tiles of size 300x450mmx7mm thick on vertical surfcaes such as skirtings,dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm backing plaster in CM 1:6 all as specified & directed. complete.

S&F of GI water tubing,medium grade with fittings,fixed to wall and laid in floor of size 15mm bore

S&F of GI water tubing,medium grade with fittings,fixed to wall and laid in floor of size 20mm bore

S&F of GI water tubing,medium grade with fittings,fixed to wall and laid in floor of size 25mm bore

Supply and fixing vitreous china wash hand basin, white, flat back of size 550X400 mm including bracket.

Supply and fixing pillar taps cast copper alloy with capstan heads, chromium plated,fancy type of size 15 mm bore screwed down high pressure screwed for 15mm iron pipe and fixed. (Make-Jaquar Essco/Prayag/Coronet/Plumber)

M&L form work to sides and soffits of roof beam/Lintel rough finished surface of concrete.

M&L for mild steel TMT bars 8 mm dia and over cut to length bent to shape as required incl cranking, bending, spirally for hooping for columns hooking ends and binding with and incl mild steel wire not less than 0.9mm dia.

Ditto- all as per above item but 5 to 10mm dia as in stirrups & links etc.

M&L for reinforced cement concrete (nominal mix) type B1, 1:2:4 ( 20mm graded stone aggregate ) as in lintel, roof band,.Beams, cantilevers lintels over 1.5m span

M&L for reinforced cement concrete (Nominal mix) type B1, 1:2:4 ( 20mm graded stone aggregate ) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) and flat all as per specified and directed

Haritwal traders

Choudhary Traders and Engineers