CERTAIN B/R MAINT SERVICES TO KOLHAPUR AND SATARA MIL STN , REPAIR/ MAINT OF WATER SUPPLY WKS, EXTERNAL ELECTRIFICATION WKS AND PROVIDING SERVICES FOR MANNING AND OPERATION OF MAIN PUMP HOUSE INCL DISTRIBUTION AT KOLHAPUR MIL STN UNDER GE (N) PUNE

Amount

Taking down chowkats or frames not exc.1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed

All as per Srl Item No. 1 above but exc. 1.5 sq. m but n exc 4 sqm each complete all as specified and directed

Taking down shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and directed

S&F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock/ strike plate, complete all as specified and directed .

S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock/ strike plate, complete all as specified and directed .

Supply and fix for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including 30mmx 4mm thick 2nd class hard wood plain cover fillets on all sides complete all as specified and as directed

M&L for 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, plain, chamfered or rounded, fitted with cut and initred beads for securing glass with stiles and rails for window and ventilators as specified in SSR Part-I section-8 clause 8.24(b) complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down and refixing in same opening of shutter exc 1 Sqm and n.exc 2 Sqm each after necessary repairs complete all as specified and as directed.

M&L PCC 1:3:6 Type C1 using 20 mm graded agg as in filling of chowkats, window bed blocks etc. complete all as specified and directed.

S&F aluminium anodised barrel tower bolts 200 mm long of extruded section fixed with stainless steel screws complete all as specified and directed.

S&F aluminium anodised handles 150 mm long of extruded section for door fixed with stainless steel screws complete all as specified and directed.

Supply and fix for 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube etc complete all as specified and directed .

Supply and fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, with particle board core complete all as specified and as directed.

S&F of stainless steel butt hinges 75 mm size with mild steel hinge pin bright polished fixed with CP screws complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed, 150mm long complete all as specified and directed .

S&F aluminium, anodised, cast type door handle 125mm size complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Supply and fix for 12mm thick gypsum board in ceiling with screws as per manufacturer's instructions including anodised aluminium snap grid 605mm X 605mm frame work as in false ceiling including hangers 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40X3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Taking out old unserviceable wire net of any description from metal frame i.e. steel windows, ventilators, verandah frame by taking out old flat iron flats and removing the same from site and supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average with of aperture 1.40mm fixed with and including flat iron fillets 12mm & 3mm size, with nut & bolts as specified and as directed.

All as per Item No. 21 above but from wooden frame with and including wooden beads 2nd class hard wood n.exc 3.00 sq cm cross section.

Demolition of stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, aprons etc. complete all as specified and directed

M&L for machine cut kota stone slab in flooring 20 to 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including screed bed 20mm thick in CM (1:6) all as specified and directed.

M&L for machine cut cudappah stone slab 20-25mm thick, laid over & including 15mm thick cement mortar 1:4 screed base, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 30mm thick, rough dressed sand stone (Shahabad stone) slab flooring, laid dry but jointed and pointed in cement mortar 1:3 complete all as specified and as directed.

Material and labour for 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Material and labour for machine pressed precast cement concrete coloured glossy interlocking paver block any shape and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.

Material and labour for glossy chequered machine pressed precast cement concrete tiles prepolished, of aproved colour and design chemically treated for antifungal of size 30cmx30cmx25mm thick in floor, set, jointed and pointed in neat cement slurry with grey cement and pigment complete all as specified and as directed.

Material and labour for screed bed 15mm thick in cement mortar (1:6) finished even and fair complete all as specified and as directed.

Taking down aluminium chowkats or frames wth shutters (without taking out shutters from the frame) exc 1.5 sqm and n.exc 4.00 sqm each including hold fasts (unit rate shall be inclusive of demolition of cement concrete blocks for embedding hold fasts) complete all as specified and directed

S&F powder coated aluminium single leaf, two panels, openable door, half glazed on top using 5.5mm thick tinted glass panes fixed with PVC rubber bidding and glazing clips and bottom both side prelaminated particle board 12mm thick fixed with glazing clips, alongwith supplying and fixing aluminium body hydraulically regulated door closer, designation No 2 universal type, suitable for shutter width 701 to 850mm of weight between 36 to 80 kg ,door lock, handle, hanged on aluminium door floor spring, pivots etc etc using aluminium sections etc all as specified and directed. Note :- Catalogue numbers of Jindal or equivalent company. (i) Top-19528 (ii) Middle-19575 (iii) Bottom-19530 (iv) Vertical-19526 (v) Glazed clips section No. 19381 and 19352 (vi) Interlock (20939) (vii) Handle (20602).

Taking out old rusted/unsv, Mild steel work such as steel windows/ ventilators complete including necessary cuttings in brick walls all as directed.

S&F Aluminium anodised powder coated louvered ventilator using rectangular tube of size 63.5 x 52 x1.5mm thick with provision of exhaust fan opening with adjustable louvers using ‘Jindal” aluminium section or equivalent make as specified including glass 4mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed

S&F aluminium Powder coated three track sliding window with two shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing, handle, locks, PVC rubber lining etc complete all as specified and as directed. Catalogue numbers of Jindal company or equivalent make as given in Appx A . Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604, all as specified and directed.

S&F aluminium anodized two track sliding window with shutter of of 4mm thick float glass ordinary quality , including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified & directed. Note :- Catalogue numbers of Jindal or equivalent make as given in Appx A. :- bottom – 20956, top/ vertical – 20966, Handle – 20606, Interlocking – 20605, Top and bottom – 20604

M&L for mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters; walk ways, railings frame work of water tanks and similar wors conforming to Fe-290. Gde E-165 complete all as specified and directed.

S&F in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aparture 1.40mm fixed with flat iron /wooden fillets, stainless steel wire staples with nut & bolts etc. complete all as directed.

M/L for preparation of new steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide comple all as specified and as directed.

M&L for hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L for 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed .

M&L for 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed .

Dismantling of plain or corrugated steel sheeting any gauge thickness, incl nainital or similar pattern as in eaves board etc. complete all as specified and directed

S&F of Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F of Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

M&L for coloured Non skid ceramic tiles of size 300 mm x 300mm x 7 to 8 mm thick in floors, etc, colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles , over and including 15mm thick screed bed in CM (1:4) all as specified and directed.

M&L for coloured Non skid ceramic tiles of size 400 mm x 400mm x 7 to 8 mm thick in floors, etc, colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles , over and including 15mm thick screed bed in CM (1:4) all as specified and directed.

M&L for coloured Non skid ceramic tiles of size 600 mm x 600mm x 7 to 8 mm thick in floors, etc, colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles , over and including 15mm thick screed bed in CM (1:4) all as specified and directed.

M&L for coloured glazed ceramic tiles of size 300 x 200 x 7 mm thick in vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match over & including 10mm thick backing coat in CM 1:3 complete all as specified & directed.

Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick plain cement concrete, 1:3:6, type C-2, using 40mm graded stone aggregate as in path/plinth protection, laid in alternate bays including finishing the surfaces even and smooth without using extra cement all as specified & as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fix for mild steel work in tubular trusses for structural work including special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes conforming to IS: 4923-1997 fixed with angle cleats or other connecting plates complete all as specified and as directed.

S&F rolled mild steel Fe-410-W(Gde-E-250) quality-A, as in roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

S&F rolled mild steel sections Fe-410-W(Gde-E-250) quality-A, as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified and directed

S&F mild steel plates Fe-410 W(Gde E-250) Quality A (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment complete all as specified and directed

S & F in repairs Vitreous China wash down water closet pan (Pedestal pattern), white with ‘P’ or ‘S’ trap including connection to drain or outgoing pipe and to PVC flushing pipe, antisyphonage pipe,10 litres capacity PVC flushing cistern low level , valve less, symphonic action type complete with inlet ball valve, float and handle with brackets and plastic water closet seat cover, white, closed pattern with recessed bottom cover and mild steel chromium plated hinge all as specified and directed.

S&F in repair Vitreous china squatting pan Orissa pattern wash down water closet white of size 580x440 mm, with integral foot rests complete with PVC P or S trap, PVC flushing cisternl 10 liters capacity , valve less, symphonic action type complete with inlet ball valve, float and handle including brackets for flush tank, 32mm dia PVC flush pipe, PVC connection 450mm long and 15mm dia to flushing cistern/ sanitary fittings with PTMT nuts of length 450mm and all necessary fittings, inlet, outlet pipe connections, including concrete bedding etc. complete all as specified and directed

S&F in repairs wash hand basin vitreous china white (flat back) of size 550x400mm including , CI bracket, 15mm dia polythene connection , 32mm dia., chromium plated (CP) waste coupling chain and plug waste fitting union and 32mm dia PVC waste pipe 90cm long etc. complete all as specified, and all necessary inlet outlet connections complete all as specified and directed.

Supply and fix in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, 32mm dia PVC flush pipe and connections to pipes, making good the disturbed surfaces complete all as specified and as directed.

Taking up or down carefully 15 mm bore steel tubing and connections complete all as specified and directed.

Taking up or down carefully 20 mm bore steel tubing and connections complete all as specified and directed.

Supplying and laying of CPVC pipes outer diameter 16mm SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of CPVC pipes outer diameter 20mm SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Fixing only 15 mm bore GI tubing 'medium grade' galvanised, including cleaning for refixing with and including supply and fix new necessary fittings such as bends, elbows, tees, unions, short pieces, caps & plugs etc to walls and ceiling or laid in floors all as specified and as directed. NOTE: Serviceable pipe obtained from dismantling shall be re used.

Fixing only 20 mm bore GI tubing 'medium grade' galvanised, including cleaning for refixing with and including supply and fix new necessary fittings such as bends, elbows, tees, unions, short pieces, caps & plugs etc to walls and ceiling or laid in floors all as specified and as directed. NOTE: Serviceable pipe obtained from dismantling shall be re used.

S&F in repairs PVC floor trap 75 mm dia with CP grating fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

M&L in repairs for CI Nahani trap 75mm dia of outlet with CP grating, jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified & directed.

S&F in repairs PVC (SWR) soil, waste and vent pipes, 110 mm bore, in any length , single socketed, jointed with rubber ring joints/adhesive, fixed to wall, with PVC clamps, ISI marked complete all as specified and directed NOTE:(i)The measurement of pipes shall be net as fixed between the fittings including short lengths, without any allowance for cutting and waste or for the portions of pipes entering the sockets of the adjacent pipe or fitting.(ii) Fittings and accessories such as bends, branches, sockets etc. shall be measured and paid separately.(iii) Rates include for all necessary extra joints, cutting and waste.

All as per Srl item No.70 above but 75 mm bore.

S&F in repairs PVC (SWR) bends, 110mm bore, any radius complete all as specified and directed.

S&F in repairs PVC (SWR) bends, 75 mm bore, any radius complete all as specified and directed.

S&F in repairs PVC(SWR) reducers 110 x 75mm bore complete all as specified and directed

S&F in repairs PVC (SWR) P trap 110/110 mm bore complete all as specified and directed

Material and labour in repairs for PVC (SWR) gully trap 125/ 110mm setting and jointing with solvent cement complete all as specified and as directed.

S&F in repairs PVC (SWR) branch piece single (single Y) junction, for 110 mm bore pipes complete all as specified and directed.

S&F in repairs PVC (SWR) vent cowl of 110mm bore complete all as specified and directed.

M/L Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, depth of embedded portion of hold fast or lugs mesured from the face of the jamb into the wall, n exc half brick complete all as specified and directed by Engr-in-Charge.

M&L Cutting chases, pinning in, making good to facings where required in stone, concrete block walls, and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelve, lintels etc and cutting chases for concealed water tubing or concealed conduct wiring etc and making good cutting n exc 10 cm girth complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore two way bib tap chromium plated cast copper alloy long body with wall flange complete all as specified and directed

S&F in repairs chromium plated Brass long body bib cock with wall flange 15mm bore complete all as specified and directed. Make :- Cat No.CON107KN of Jaguar Continental or equivalent as approved by GE. Note :- If Cat No. is revised, equivalent cat No. from latest catalogue shall be considered.

S&F in repairs Bib taps fancy type cast copper alloy, chromium plated for 15 mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected.

S&F in reparis 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms)complete all as specified and as directed.

S&F in repair 15mm bore Stop valve of PTMT any colour high pressure with wall flange screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed

S&F in repair chromium plasted brass stopcock fancy type (concealed type) screwed both ends high pressure for 15mm bore iron pipe or ferrule complete all as specified

S&F in repairs pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete all as specified and directed.

S&F in repairs of 40mm bore waste coupling of PTMT (half or full threaded) minimum weight 60gms complete all as specified and as directed.

S&F in repairs of 32mm bore waste coupling of PTMT (half or full threaded) minimum weight 45gms complete all as specified and as directed.

S&F in repair of chromium plated shower rose fancy type 125mmx125mm with or without swivel any size, including fixing to steel pipe or union, complete all as specified and as directed by Engr-in-Charge.

S&F in repair of fancy type chromium plated Shower arm 15mm size, casted, minimum 190mm long, flat shape for wall mounted showers with flange complete all as specified and directed.( Make:Jaquar, Cat part No. SHA-483 or equivalent of make as per Appx A as approved by GE)

S&F in repairs chromium plated jet spray for WC with 100cm long PVC pipe including necessary GI fitting as required like toe, nipple all as specified and as directed (Make : Cera or equivalent as approved).

Supply and fix in repairs for chromium plated, overhead shower 200X200mm square shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system, Cat No.OHS-35497 of make Jaquar or equivalent of make as per Appx A as approved by GE) complete all as specified and as directed.

Supply and fix in repairs for corner glass shelf of size 250mm radius and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.

S&F in repairs shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as specified and directed

S&F in repairs chromium plated single towel rail 600mm long including built in side brackets, Cat No. AQN 7711 of make Jaquar ' QUEEN'S Series or equivalent of make as per Appx A as approved by GE complete all as specified and directed.

S&f in repair PVC waste pipe 32mm dia for WHB complete all as specified and directed.

S&f in repair PVC waste pipe 40mm for Kitchen sink complete all as specified and directed.

Supply and fix in repairs for grating round 140mm size of PTMT (minimum weight 50gms) complete all as specified and as drected.

Supply and fix for stainless steel sink made of Stainless Steel, 1mm thick with drainage board made of 1mm thick sheet, with plug, washers and waste coupling, waste pipe, including bedding in cement mortar to dwarf wall or cast iron cantilever brackets and connecting union to pipe, over all size 915 mm x 460 mm with bowl size 410mm X 330mm X 160mm all as specified and directed.

Supply and fix in repair for stainless steel plate rack of size 24 inch x 36 inch x 10 inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed. Make – Blue Star Silver Shine Cat No.SSKPR-312 or equivalent from Nirali/ Jain Brothers Sanitation Pvt Ltd (Jayna )/ Prayag as approved by GE.

Dismantling 500 litres capacity PVC water tanks all as specified and as directed.

Dismantling 1000 litres capacity PVC water tanks all as specified and as directed.

M&L HDPE rotational molded polyethylene water storage tank of 500 liters capacity, ISI marked, (cylindrical, vertical with closed top) hosted and fixed ,with and including float valve 20mm, ball brass valve, high pressure with polythene float and fly nut hoisted and fixed in position all as specified in SSR Part-I.

M&L HDPE rotational molded polyethylene water storage tank of 1000 liters capacity ,ISI marked, (cylindrical, vertical with closed top) hosted and fixed ,with and including float valve 20mm, ball brass valve, high pressure with polythene float and fly nut hoisted and fixed in position all as specified in SSR Part-I.

Dismantling old plywood, prelaminated particle board / boarding, cupboard shelves or similar items of any description, fixed in any position with screws all as specified and directed .

Material and labour for 12mm thick plywood, grade BWP, type BB, number of ply 7 Nos, ISI marked fixed with fevicol and screws for working table/ storage almirah, wall panelling to the size and pattern including fixing on walls, floors etc. complete all as shown on drawing and as directed.

M&L for 18mm thick plywood BWR grade, type BB, number of ply 9 Nos fixed with screws for cupboard to the size and pattern as directed.

Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.

S&F in repairs 100mm extruded brass handles, fabricated type polished complete all as specified and directed.

M/L 2nd class hard wood Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area n exc 3 sq cm complete all as specified and directed.

Supply and fix in repair, magnetic catch, heavy duty and connected plate to shutters and frame complete all as specified and as directed.

Supply and fix for 40 mm dia cupboard knob fixed with nut, screw and washer of mild steel bright finished complete all as specified and as directed.

S&F for continuous (piano) hinges, mild steel, bright finish with 30mm wide flaps (when open) and fixed with full threaded steel screws complete all as specified and directed.

Material and labour for cutting holes in brick built in cement mortar/ walls of cement concrete and making good in cement mortar 1:3 or cement concrete (1:2:4) type B1 (using 20mm graded broken stone aggregate) as required, superficial area n.exc150 Sqcm complete all as specified and as directed.

Supply and fix in repairs, 25mm bore aluminium powder coated fancy type decorative type curtain rod as per sample kept in GE (N) Pune office complete all as specified and as directed.

S&F in repairs aluminium powder coated fancy type decorative brackets suitable for 25 mm dia curtain rod (minimum projection from wall 75 mm ) fixed to wall including drilling, rawl plug, screws etc complete all as specified and as directed as per sample kept in the GE office.

Dismantling single layer Mangalore pattern or similar tiles in roofing including ridge tiles complete all as directed.

M&L for roof tiles Mangalore pattern 'AA' Grade interlocking at side joints, laid dry complete all as specified and directed

All as per Srl item No. 119 above but except tiles.

M&L for ridge or hip tiles to suit Mangalore pattern roofing bedded and jointed in CM 1:6 complete all as specified and directed

Dismantling wooden boarding any description fixed in any position fixed with nails complete all as specified and directed.

M&L for 2nd Class HW weather boarding, clean sawn, plain or feather edged, thickness 20mm and fixed with 30mm laps complete all as specified and directed.

M&L filleting in any position and to any shape in CM 1:3 including all mitres, stops etc. section of fillet exc 25 and n.exc 50.00 Sqcm complete all as specified and directed.

Demolition of brickwork or stone/block masonry, built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed.

Material and labour for precast solid cement concrete block masonry exc.10cm width using solid blocks of PCC design mix grade C5 set in cement mortar (1:6) complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered external surfaces of walls and applying two coats of cement base paint of approved brand all as specified and as directed.

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for laying pipe line, laying/ taking out of underground cable/ pole/ stays foundation etc. and getting out in soft/ loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed.

Removing of excavated material (soil) to distance not exc.50metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Taking up or down 25 mm bore steel tubing with all fittings and connections complete all as directed.

Taking up or down 40 mm bore steel tubing with all fittings and connections complete all as directed.

Taking up or down 50 mm bore steel tubing with all fittings and connections complete all as directed.

Taking up or down 80 mm bore steel tubing with all fittings and connections complete all as directed.

Taking up or down 100 mm bore steel tubing with all fittings and connections complete all as directed.

Relaying only of 25mm dia GI tubes any grade in trenches after cleaning or rerunning the old screw threads with replacement of unserviceable fittings and fixtures complete all as directed. (Note: Materials obtained from Item taking up or down here-in-before)

Relaying only of 40mm dia GI tubes any grade in trenches after cleaning or rerunning the old screw threads with replacement of unserviceable fittings and fixtures complete all as directed. (Note: Materials obtained from Item taking up or down here-in-before)

Relaying only of 50mm dia GI tubes any grade in trenches after cleaning or rerunning the old screw threads with replacement of unserviceable fittings and fixtures complete all as directed. (Note: Materials obtained from Item taking up or down here-in-before)

Supply and laying for 15mm dia galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed.

Supply and laying for 20mm dia galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed.

Supply and laying for 25mm dia galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed.

Supply and laying for 40mm dia galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed.

Supply and laying for 50mm dia galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed.

Supply and laying for 80mm dia galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed.

Supply and laying for100mm dia galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed.

Supply and fix for 15mm dia gun metal gate valve with iron wheel head screwed both ends, ISI marked, fixed to GI pipe including removal of old unserviceable valve complete all as specified and as directed.

Supply and fix for 20mm dia gun metal gate valve with iron wheel head screwed both ends, ISI marked, fixed to GI pipe including removal of old unserviceable valve complete all as specified and as directed.

Supply and fix for 25mm dia gun metal gate valve with iron wheel head screwed both ends, ISI marked, fixed to GI pipe including removal of old unserviceable valve complete all as specified and as directed.

Supply and fix for 40mm dia gun metal gate valve with iron wheel head screwed both ends, ISI marked, fixed to GI pipe including removal of old unserviceable valve complete all as specified and as directed.

Supply and fix for 50mm dia gun metal gate valve with iron wheel head screwed both ends, ISI marked, fixed to GI pipe including removal of old unserviceable valve complete all as specified and as directed.

Supply and fix for 80mm dia gun metal gate valve with iron wheel head screwed both ends, ISI marked, fixed to GI pipe including removal of old unserviceable valve complete all as specified and as directed.

Supply and fix for 100mm dia gun metal gate valve with iron wheel head screwed both ends, ISI marked, fixed to GI pipe including removal of old unserviceable valve complete all as specified and as directed.

Supply and fix for 20mm dia gun metal non return valve horizantal/ vertical type screwed both ends, ISI marked, fixed to GI pipe including removal old unserviceable valve complete all as specified and as directed.

Supply and fix for 25mm dia gun metal non return valve horizantal/ vertical type screwed both ends, ISI marked, fixed to GI pipe including removal old unserviceable valve complete all as specified and as directed.

Supply and fix for 40mm dia gun metal non return valve horizantal/ vertical type screwed both ends, ISI marked, fixed to GI pipe including removal old unserviceable valve complete all as specified and as directed.

Supply and fix for 50mm dia gun metal non return valve horizantal/ vertical type screwed both ends, ISI marked, fixed to GI pipe including removal old unserviceable valve complete all as specified and as directed.

Supply and fix for 80mm dia gun metal non return valve horizantal/ vertical type screwed both ends, ISI marked, fixed to GI pipe including removal old unserviceable valve complete all as specified and as directed.

Supply and fix for 15mm dia PVC float valve, ISI marked, high pressure with PVC float nut complete for iron pipe including removal old unserviceble valve complete all as specified and as directed.

Supply and fix for 20mm dia PVC float valve, ISI marked, high pressure with PVC float nut complete for iron pipe including removal old unserviceble valve complete all as specified and as directed.

Supply and fix for 25mm dia PVC float valve, ISI marked, high pressure with PVC float nut complete for iron pipe including removal old unserviceble valve complete all as specified and as directed.

Material and labour for attending the emergent complaint and repairs to leakage/ damage GI pipe of size 15 mm to 20 mm bore including carrying out minor repairs etc as required to make the system in order/ functional and necessary excavation ,returning filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified and as directed. Note: (i) Rate inclusive of jointing of and earth work (ii) GI fittings will be measured and paid seperately under relevant items).

Material and labour for attending the emergent complaint and repairs to leakage/ damage GI pipe of size 25 mm bore including carrying out minor repairs etc as required to make the system in order/ functional and necessary excavation ,returning filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified and as directed. Note: (i) Rate inclusive of jointing of and earth work (ii) GI fittings will be measured and paid seperately under relevant items).

Material and labour for attending the emergent complaint and repairs to leakage/ damage GI pipe of size 40mm to 50 mm bore including carrying out minor repairs etc as required to make the system in order/ functional and necessary excavation ,returning filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified and as directed. Note: (i) Rate inclusive of jointing of and earth work (ii) GI fittings will be measured and paid seperately under relevant items).

Material and labour for attending the emergent complaint and repairs to leakage/ damage GI pipe of size 80mm bore including carrying out minor repairs etc as required to make the system in order/ functional and necessary excavation ,returning filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified and as directed. Note: (i) Rate inclusive of jointing of and earth work (ii) GI fittings will be measured and paid seperately under relevant items).

Supply only GI union of size 100 mm dia.

Supply only GI union of size 80 mm dia.

Supply only GI union of size 50 mm dia.

Supply only GI union of size 40 mm dia.

Supply only GI union of size 25 mm dia.

Supply only GI union of size 20 mm dia.

Supply only GI union of size 15 mm dia.

Supply only GI Socket/ reducer of size 100 mm dia.

Supply only GI Socket/ reducer of size 80 mm dia.

Supply only GI Socket/ reducer of size 50 mm dia.

Supply only GI Socket/ reducer of size 40 mm dia.

Supply only GI Socket/ reducer of size 25 mm dia.

Supply only GI Socket/ reducer of size 20 mm dia.

Supply only GI Socket/ reducer of size 15 mm dia.

Supply only GI nipple heavy duty of size 100 mm dia.

Supply only GI nipple heavy duty of size 80 mm dia.

Supply only GI nipple heavy duty of size 50 mm dia.

Supply only GI nipple heavy duty of size 40 mm dia.

Supply only GI nipple heavy duty of size 25 mm dia.

Supply only GI nipple heavy duty of size 20 mm dia.

Supply only GI nipple heavy duty of size 15 mm dia.

Supply only GI Elbow/ Tee equal/ Tee reducer of size 100 mm dia.

Supply only GI Elbow/ Tee equal/ Tee reducer of size 80 mm dia.

Supply only GI Elbow/ Tee equal/ Tee reducer of size 50 mm dia.

Supply only GI Elbow/ Tee equal/ Tee reducer of size 40 mm dia.

Supply only GI Elbow/ Tee equal/ Tee reducer of size 25 mm dia.

Supply only GI Elbow/ Tee equal/ Tee reducer of size 20 mm dia.

Supply only GI Elbow/ Tee equal/ Tee reducer of size 15 mm dia.

Supply only GI bend heavy duty both side threaded of size 100 mm dia.

Supply only GI bend heavy duty both side threaded of size 80 mm dia.

Supply only GI bend heavy duty both side threaded of size 50 mm dia.

Supply only GI bend heavy duty both side threaded of size 40 mm dia.

Supply only GI bend heavy duty both side threaded of size 25 mm dia.

Supply only GI bend heavy duty both side threaded of size 20 mm dia.

Supply only GI bend heavy duty both side threaded of size 15 mm dia.

Supply and fix for in line pressure boosting pump electrically operated 240 volts, 50 Hz fixed to 15/ 20 mm dia conforming to Model No. PB 88 of Make Wilo or equivalent of make Kirloskar/ KSB/ Crompton/ Grandfosc as approved including necessary electrical connections, GI fittings and removal of old unserviceable one complete all as specified and as directed.

Supply and fix for in line pressure boosting pump electrically operated 240 volts, 50 Hz fixed to 20/ 25 mm dia conforming to Model No. PB 200 of Make Wilo or equivalent of make Kirloskar/ KSB/ Crompton/ Grandfosc as approved including necessary electrical connections, GI fittings and removal of old unserviceable one complete all as specified and as directed.

Burning out unserviceable/ leakage lead joint in position, including removing old lead, necessary excavation of soils, returning filling and removal of accumulated water by using pump of 80mm dia pipe complete all as directed. Note : (i) Rate inclusive of earth work (ii) Lead joint will be measured and paid seperately under relevant items.

Burning out unserviceable/ leakage lead joint in position, including removing old lead, necessary excavation of soils, returning filling and removal of accumulated water by using pump of 100mm dia pipe complete all as directed. Note : (i) Rate inclusive of earth work (ii) Lead joint will be measured and paid seperately under relevant items.

Material and labour for run lead joint in spigot and socket pipes and fittings of size 80 mm dia including necessary caulking the spun yarn as required complete all as specified and as directed.

Material and labour for run lead joint in spigot and socket pipes and fittings of size 100 mm dia including necessary caulking the spun yarn as required complete all as specified and as directed.

Supply and fix for 100mm dia cast iron sluice valve with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos including removing of old unserviceable valve complete all as specified and as directed.

Supply and fix for 80mm dia cast iron sluice valve with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos including removing of old unserviceable valve complete all as specified and as directed.

Supply and fix for 100mm dia cast iron body and brass gate heavy duty non return valve, ISI marked, (NRV) both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos including removing of old unserviceable valve complete all as specified and as directed.

Supply and fix for 80mm dia cast iron body and brass gate heavy duty non return valve, ISI marked, (NRV) both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos including removing of old unserviceable valve complete all as specified and as directed.

supply and fix for 100mm dia cast iron foot valve, ISI marked, both end flanged with nut bolt washers and rubber gasket conforming to IS 4038, installation, testing complete all as specified and as directed.

supply and fix for 80mm dia cast iron foot valve, ISI marked, both end flanged with nut bolt washers and rubber gasket conforming to IS 4038, installation, testing complete all as specified and as directed.

supply and fix for 50mm dia cast iron foot valve, ISI marked, both end flanged with nut bolt washers and rubber gasket conforming to IS 4038, installation, testing complete all as specified and as directed.

Taking up or taking down CI/ DI pipe of size 100 mm and connections including cleaning for refixing or removal to store complete all as directed.

Supply, laying, jointing and testing of 100mm bore ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, class K-9, with cement mortar lining in inner side as per IS:8329/2000 (latest revision) and other relevant standards and metallic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint (rubber gasket joint) in any length with inside cement mortar lining laid in trenches complete all as specified an as directed. Note : Excavation and earth work shall be measured and paid separately under relevant item.

Material and labour for connecting pieces one end flanged and other end socket or spigot and bell mouth pieces one end flanged other end tapering as bell mounth, DI Bends tapers, Tees, pieces (Single or double branch) any type and angle/ radius and straight connecting pieces for DI Pipe upto 100 mm bore complete all as specified and as directed.

Material and labour for connecting pieces one end flanged and other end socket or spigot and bell mouth pieces one end flanged other end tapering as bell mounth, CI Bends tapers, Tees, pieces (Single or double branch) any type and angle/ radius and straight connecting pieces for CI Pipe upto 100 mm bore complete all as specified and as directed.

Material and labour for construction of brick masonry valve pit, one brick thick wall using old size bricks in cement mortar (1:4) on 100mm thick PCC (1:4:8) type D2 (40mm graded broken stone aggregate) in foundation, rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS sheet valve pit cover, welded with 40X5mm flat iron frame alround including provision of hinges, handle and locking arrangement and 40 x 40 x 6mm angle iron frame fixed on top of valve pit by means of holdfast 150mm long, embedded in PCC 1:2:4 type B1 (20mm graded broken stone aggregate) block of size 230 x 200 x 100 mm, applying two coats of anti-corrosive paint over a coat of red oxide zinc chrome primer after preparation of all exposed to steel surfaces including necessary earth work in soft/ loose soil and demolition of old unserviceable valve pit of size 900 X 900 X 900mm (internal dimension) complete all as specified and as directed.

All as per serial item No.218 here-in-before but valve pit of size 750 X 750 X 900mm (internal dimension).

All as per serial item No.218 here-in-before but valve pit of size 450 X 450 X 450mm (internal dimension).

Material and labour for taking out pumping sets from foundation, disconnecting the water and electric connnection and transporting to work shop, opening the pump for inspecting all parts to identify defective parts, cleaning/ servicing & greasing including refixing and replacement of unserviceable ball bearings for drive end and non drive end, gun metal bushes, worn out gland packing, gland nut bolt & replacement of damaged foundation bolts, reassembling of pumping set and transporting back to pump house, installing, connecting with water & electric connection and testing for performance for pump of capacity 10 HP complete all as directed.

Material and labour for taking out electric motor by disconnecting from terminal & pump coupling, foundation complete removing of motor, carrying to workshop and return after opening motor removing burnt copper wire, cleaning all parts thoroughly rewinding motor with same gauge and same No. of turns of super enamelled copper wire including insulating materials like varnishing, heating etc and replacement unserviceable ball bearings, terminal plate, foundation bolts and reassembling the electric motor by connecting with pump and electrical connections testing on completion for motor capacity of 10.0HP complete all as directed.

Supply and fix for DOL starter (conforming to IS 13947-4) 415 volts 50 Hz 3 phase for electric motor of capacity upto 3 HP including removal of old unserviceable one complete all as specified and as directed. Make : L&T/ Siemens/ ABB as approved.

Supply and fix for DOL starter (conforming to IS 13947-4) 415 volts 50 Hz 3 phase for electric motor of capacity upto 5 HP including removal of old unserviceable one complete all as specified and as directed. Make : L&T/ Siemens/ ABB as approved.

Supply and fix for fully automatic star delta starter FASD in sheet metal enclouse 415 volts, 50 Hz, 3 Phase for electric motor suitable for 10.0/12.5 HP capacity including removal of old unserviceable starter complete all as specified and as directed. Make : L&T/ Siemens/ ABB as approved.

Material and labour for brass impeller set suitable for any type and make of centrifugal/ monoblock pump of capacity 10.0 HP including removal of old unserviceable one complete all as specified and as directed. Make: Kirloskar/ KSB/ Becon/ Crompton Greaves as approved.

Material and labour for stainless steel pump shaft including stainless steel sleeves suitable for centrifugal/ mono block pump set for capacity of pump 10.0 HP including removal of old unserviceable one of complete all as specified and as directed. Make: Kirloskar/ KSB/ Becon/ Crompton Greaves as approved.

Material and labour for disconnect the electric cable from panel and taking out the unserviceable/ burnt out submersible/ openwell pump set from the bore with the help of chain pully and tripard of and transporting to work shop for carrying out rewinding the motor with same gauge and same No. of turns of with water proof PVC insulated copper wire of existing guage and size to achieve the specified/ required RPM including taking out old unserviceable winding wire, cleaning/ repairing damaged slots and also replacement of impellers, bearings, thrust bearings, gun metal bushes and NRV as per existings of pump and testing on completion to the motor and for smooth function for submersible pump set in bore well of capacity 3.0 HP complete all as specified and as directed. Note: Submersible cable, rope will be measured and paid seperately under relevant items.

All as per serial item No.228 here-in-before but for submersible pump set in bore well of capacity 5.0 HP.

Supply only submerssible copper conductor mutistraned cable of size 2.5 Sq mm 3 core with necessary connections from motor to starter complete all as specified.

Supply only submersible copper conductor mutistraned cable of size 4 Sq mm 3 core with necessary connections from motor to starter complete all as specified.

Supply only nylon rope 8/12 mm dia with necessary locking arrangements complete all as specified.

Material and labour for disconnect the electric cable from panel and replaced the worn out contactor for 10 HP capacity starter in FASD starter and lugs and connecting copper wire complete all as specified and as directed. Make: L&T/ Siemen/ ABB/ Legrand as approved.

Material and labour for disconnect the electric cable from panel and replaced the worn out relay for 10 HP capacity starter in FASD starter and lugs and connecting copper wire complete all as specified and as directed. Make: L&T/ Siemen/ ABB/ Legrand as approved. Make: L&T/ Siemen/ ABB/ Legrand as approved.

Supply and fix PVC lids/ cover heavy duty for service tank including necessary locking arrangements of capacity up to 500 litres including removal of old unserviceable cove complete all as specified and as directed.

Supply and fix PVC lids/ cover heavy duty for service tank including necessary locking arrangements of capacity 1000 litres including removal of old unserviceable cover complete all as specified and as directed.

Supply and fix for water level indicator cum controller device for OH resevoir tank of 15 metres stagging showing 8 stage of water storage with necessary multi standard copper conductor cable alongwith water level sensor including removal of old unserviceable one complete all as specified and as directed. Make : Press Corporation/ Autocon as approved.

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized iron earth strip of size 32 x 6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm with one handle for lifting made out of 8mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 40mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I . (Note: GI earth strip and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)

Material and labour for attending the emergent complaints for unserviceable/ break down/ fault of water supply pump sets of any capacity including carrying out minor repairs in electrical supply system in control panel and motor teriminals etc after finding the fault as required to make the pump set in order to functional complete all as specified and as directed. (Note : (i) Rate inclusive for minor items like fuse wire, copper cable etc . (ii) Major items like starter, contractor etc will be measured and paid separately under relevant item.)

M&L for brick work with sub-class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 including demolition of existing brick work complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick or concrete surfaces finished even and fair complete all as specified and as directed.

S&F MS plain black sheet 3mm thick as in chamber cover welded to M S angle iron & flat iron frame work ,with necessary hinges and locking arrangement including applying two coats of synthetic enamel paint over a coat of red oxide primer including demolition of existing MS work complete all as specified and as directed .

Material and labour for machine pressed precast cement concrete interlocking paver block any shape and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 in floor/ pavement laid over and including 30mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.

Supply,installing, testing and commissioning indoor type LT panel of suitable size, padestal mounted, CPRI approved factory made totally enclosed, dust and vermin proof, double leaf shutter in front and rear side made of 3.00 mm thick CRCA sheet and 50x50x6mm size angle iron frame work, duly fabricated and having proper locking arrangement in both front and rear door and painted with powder coating paint and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC (1:2:4) type B1 (using 20mm graded broken stone aggregate) plat form all round the panel board complete with the following items housed in:- (i) 150 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/ DMC insulator bus bar support (Square/ round ) insulators of suitable size and good insulation resistance. (ii) On load change over Switch TPN of capacity 100 Amps - 01 No (in coming) (iii) MCCB 4 pole 100 Amps, rotary handle, adjustable thermal magnetic relay breaking capacity 36 KA at 415 volts Ics=100% Icu - 01 No (in coming)

Checking the fault in the LT distribution cable of any size and length at any location with fault detector machine and fixing only LT straight through cable joint kit (LT) and LT UG cable of required length after determining the fault location and testing complete all as specified and as directed by Engineer- in-Charge. Note:-(i) Fault detector machine and other equipment shall be arranged by the contractor within one hour of complaint received. (ii) Supply only Cable jointing kit and M & L for LT UG cable, Excavation & Earth work shall be measured and paid separately under relevant items.

Supply only LT cable jointing kit 1100 volt grade cable for straight through heat shrinkable type, tubular sleeve version joint kit complete with jointing material and accessories suitable for XLPE/ PVC armoured aluminium conductor cable of size not exceeding 16qmm 4/ 3.5 core complete all as specified.

All as per Serial item No.246.00 here-in-before but for cable of size from 25Sqmm and not exceedinh 50Sqmm 3.5 core.

All as per Serial item No.246.00 here-in-before but for cable of size from 70Sqmm and not exceeding 150Sqmm 3.5 core.

Checking the fault in HT cable of any size and length at any location, 11000 Volts AC system with fault detector machine and inserting HT straight through cable joints kits after determining the fault location and testing complete all as directed by Engineer-in-Charge. Note : (i) Fault detector machine and other equipment shall be arranged by the contractor. (ii) Supply only HT Cable jointing kit, Excavation & Earth work shall be measured and paid separately under relevant items.

Supply only cable jointing kit 11 KV (Earthed) grade cable for straight through cold shrinkable type joint complete with jointing material and accessories suitable for XLPE armoured aluminium conductor cable of size from 70 Sqmm and not exceeding 95Sqmm 3 core.

Material and labour for cable end jointing kit 11 KV (Earthed ) grade cable for outdoor termination cold shrinkable type joint complete with jointing material and accessories suitable for HT XLPE armoured aluminium conductor cable of size for 70Sqmm and not exceeding 120Sqmm 3 core complete all as specified and as directed.

Supply and laying 40mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection complete all as specified and as directed.

All as per item No. 252 here-in-before but 50mm outer dia.

All as per item No. 252 here-in-before but 63mm outer dia.

All as per item No. 252 here-in-before but 77mm outer dia.

Taking down existing unservicable UG cable of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified. Note :- Excavation, earth work and cable protection shall be measured and paid separately under relevant items.

Supply, laying, testing and commissioning of LT UG cable XLPE sheathed PVC insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volts grade with brass cable glands, clamps etc laid in trenches/ surface of wall/ in GI pipe along with pole for connection to MCCBs/ OH lines including making good damaged surfaces as required of size 120Sqmm 3.5 core complete all as specified and as directed. Note: Excavation, earth work, cable protection, GI pipe shall be measured and paid separately under relevant items

All as per Serial item No.257.00 here-in-before but for cable of size 95 Sqmm 3.5 core.

All as per Serial item No.257.00 here-in-before but for cable of size 70 Sqmm 3.5 core.

All as per Serial item No.257.00 here-in-before but for cable of size 50 Sqmm 3.5 core.

All as per Serial item No.257.00 here-in-before but for cable of size 35 Sqmm 3.5 core.

All as per Serial item No.257.00 here-in-before but for cable of size 25 Sqmm 4.0 core.

All as per Serial item No.257.00 here-in-before but for cable of size 16 Sqmm 4.0 core.

Laying only LT UG Cable of any description and size (Serviceable cable obtained from taking down of cable here-in-before), laid in trenches/ surface of wall/ in GI pipe along with pole for connection to OH lines including brass cable glands mild steel flat iron clamps and testing complete all as specified and as directed. Note :- (i) Earthwork, cable protection, GI pipe will be measured and paid separately under relevant item. (ii) Cost of shifting of cables at work sites as ordered is deemed to be included in the quoted unit rate.

Supply, laying, testing and commissioning HT XLPE cable, insulated, screended, PVC bedded, galvanised steel strip or wire armoured, electic power cable, heavy duty, with stranded aluminium conductor, conforming to IS : 7098 (Part II), 11 KV "E" grade, laid in pipe/ ducts/ trenches/ under floor/ under road, of size 95 Sqmm 3 core complete all as specified and as directed. Note: Excavation, earth work, cable protection shall be measured and paid separately under relevant items including reusing of old HT cable cover obtaining after exavation.

Supply and fix in repair for aluminium lugs duly crimped at end termination of transformer/ LT distribution panel connected with various sizes of LT cable including all allied works such as disconnecting cable from supply site, removing from gland, making equal length of each core of cable and refixing the same with new metal gland for cable of size up to 35 Sqmm 3.5 core complete all as specified and as directed. Note: (i) Each job includes 04 Nos aluminium lugs at one end termination, insulating material and 01 No metal gland etc.

All as per Serial item No.266.00 here-in-before but for cable of size 50 Sqmm 3.5 core.

All as per Serial item No.266.00 here-in-before but for cable of size 70 Sqmm 3.5 core.

All as per Serial item No.266.00 here-in-before but for cable of size 95 Sqmm 3.5 core.

All as per Serial item No.266.00 here-in-before but for cable of size 120 Sqmm 3.5 core.

All as per Serial item No.266.00 here-in-before but for cable of size 185 Sqmm 3.5 core.

All as per Serial item No.266.00 here-in-before but for cable of size 240 Sqmm 3.5 core.

Supply and fix for insulator pin type of size 100 mm height, 65 mm dia for 1100 Volt grade, porcelain, vitreous, white, brown or green including one galvanized MS spindle, two GI washers and one GI nut including removing of old unserviceable insulator complete all as specified and as directed.

Supply and fix for insulator shackle type of size 75mm height, 90mm dia for 1100 Volt grade, porcelain viterous, white, brown or green including galvanised mild steel straps of size 31x3mm, washers , insulator bolts of size 12mm and nuts including removing of old unserviceable insulator complete all as specified and as directed.

Supply and fix for insulator pin/ post type porcelain, vitreous, brown insulator including one galvanishing MS spindle, nuts and washers of 150mm height, 150 mm dia for 11000 volt grade and fixing to the structure and binding of conductor including removal of unserviceable one from the HT 2 pole/ 4 pole structure complete all as specified and as directed.

Supply and fix for alkathine PVC pipe for bus/ jumper connection as insulating material at 4 pole/ 2 pole structure in the area complete all as specified and as directed.

Material and labour for stringing and fixing in position of ACSR conductor in OH line 3 phase 4 wire/ 1 phase 2 wire of any size as per site requirement including provision of aluminum binding wire complete including removal of old unserviceable ACSR conductor complete all as specified and as directed.

Supply and fix for HT Aluminium ferrules/ lugs of suitable size with chromium plated nut bolts for connection of GOD/ DO/ cable end jumpers including removal of unserviceable one complete all as specified and as directed.

Labour only for repair to HT 11 KV, 4/6/8 pole structure of 11 metres height steel poles including replacement of all perished ACSR conductor (ferret) of horizontal bus bar and down conductors for GOD system on structure, jumpering and binding with aluminium conductor to the post insulators/ pin insulators and providing PVC sleeves to the down conductor with colour code R, Y & B, replacing all rusted nuts and bolts on the above pole structure complete all as directed.

All as per Serial item No.279.00 here-in-before but for two pole structure.

Supply, install, fixing, commissioning and testing of air break gang operated triple pole switch out door type of capacity 200 Amps AC mechanically operated mounted on polymer bases insulators and steel frame with operating mechanism worked from ground level complete with locking arrangements including pad locks with key complete suitable for 11KV, HT, 50 Hz including taking down old unseviceable one complete all as specified and as directed.

Supply, install, fixing, connecting and testing of polymer based drop-out fuse set (set of 3 Nos), mounted on insulators with steel frame 200 Amps capacity, siutable for 11KV, HT system, out door type, including expulsion fuse carriers and fuse element upto 25 Amp including taking down old unserviceable one complete all as specified and as directed.

Supply and fix for lightening arrestor non linear resistor type conforming to IS 3070 (part-3) 1993 complete, line discharge class-3, nominal discharge current 10KA (peak), 12KV rated system, voltage peak value high current impulse of 4/10 micro Sec. wave shape 100 KA (peak) assembly suitable for 11 KV, long duration discharge class-II with insulation level 28/75 KV and mounted on hot dip galvanized steel structure including all clamps, nuts, bolts and washers and connecting to earth with 4 mm dia GI wire including removal of existing unserviceable one complete all as specified and as directed.

Material and labour for danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20cm x 15cm size complete all as specified and as directed

Taking out the unserviceable and perished panel board doors/ body from the panel board, replace with same size made out of CRCA sheet of 2 mm thick duly fabricated, welded including the door hinges and having proper locking arrangement to the existing LT panel doors by means of replacing the door hinges and making doors operatable including two coats of synthetic enamel paint over a coat of red oxide primer with spray painting to match with existing colour complete all as specified and as directed Note : (i) T&P as required shall be arranged by the contractor such as welding machine etc.

Material and labour for preparation of feeder pillar/ out door LT panels at various places, old decorated surfaces by scraping rusts, cleaning of dust and applying two coats of synthetic enamel paint with spray painting complete all as specified and as directed.

Supply and fix for MCCB, TPN, 415 Volts, adjustable thermal magnetic release type, 400 Amps with breaking capacity 50 KA, Ics = 100% Icu with suitable fixing arrangements in the panel with refixing the existing cable including removal of old unserviceable item complete all as specified and as directed.

Supply and fix for MCCB, TPN, 415 Volts, adjustable type, 250 Amps with breaking capacity 36 KA, Ics = 100% Icu with suitable fixing arrangements in the panel with refixing the existing cable including removal of old unserviceable item complete all as specified and as directed.

Supply and fix for MCCB, TPN, 415 Volts, adjustable type, 200 Amps with breaking capacity 25 KA,Ics = 100% Icu with suitable fixing arrangements in the panel with refixing the existing cable including removal of old unserviceable item complete all as specified and as directed.

Supply and fix for MCCB, TPN, 415 Volts, Adjustable type, 160 Amps with breaking capacity 25 KA, Ics = 100% Icu with suitable fixing arrangements in the panel with refixing the existing cable including removal of old unserviceable item complete all as specified and as directed.

Supply and fix for MCCB, TPN, 415 Volts, fixed type, 100 Amps with breaking capacity 18 KA with suitable fixing arrangements in the panel with refixing the existing cable including removal of old unserviceable item complete all as specified and as directed.

Supply and fix for MCCB, TPN, 415 Volts, fixed type, 63 Amps with breaking capacity 18 KA with suitable fixing arrangements in the panel with refixing the existing cable including removal of old unserviceable item complete all as specified and as directed.

Trimming of tree branches around over head electric lines and cleaning 3 metres from the line, removing cut materials ( tree branches) from site and stacking properly where directed, girth of branch ( where cutting take place) not exc. 50 mm complete all as specified and as directed.

All as per Serial item No.293 here-in-before but for girth exc. 50 mm but not exc. 100 mm.

All as per Serial item No.293 here-in-before but for girth exc. 100 mm but not exc. 150 mm.

Cutting unaxious green growth and wild grass by manual labour or by machine at electrical installation premises, around pole along the boundary fencing and clearing off the shrubs, vegetation grass, bushes, plants and saplings grown below HT lines and all sub-stations in the area and clearing the rubbish material from the site of work and deposting where directed not exc. 100 metres from the starting point complete all as specified and as directed . Note:- The item shall be operated maximum 3 times in the entire period of the Contract and the measurement will be taken every time independently for payment.

Material and labour for 80mm bore galvanised steel pipe light grade laid in trenches/ wall/ pole as in protection of UG cable including taking out/ down old unserviceable pipe all as specified and directed of following sizes.

All as per Serial item No.297 here-in-before but for 50mm bore.

All as per Serial item No.297 here-in-before but for 40mm bore.

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized strips earth lead of size 32x6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm with one handle for lifting made out of 8mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 40mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and (Contd....)

including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I including taking out old unserviceable earthing. (Note: GI earth wire and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)

Providing services for daily maintenance, manning & operation of Water Supply Installation at Kolhapur main water supply Pump House comprising with pumping set 10 HP - 03 Nos, electric driven AC 3 phase 415 volts, electric panels, sluice valve for pumping and supply of potable water during supply hrs, including chlorination by Bleaching Dozer or manually by deploying minimum ONE ORERATOR (Valveman cum Pump-Attendant) (Semi Skilled) daily in TWO SHIFTS PER DAY (Morning and Evening ) (8 Hour Per Shift) including Sundays and Holidays, complete all as specified and as directed by Engineer-in-Charge

NOTES :- (a) The term ‘Daily Operation’ includes minor maintenance like General Cleaning, Cleaning of Machines, Equipments, pumps and Hourly Reading, Recording of Each installation. Log Sheet(s) will be provided by the Contractor to all Equipments of each pump set set wise in Standard Proforma to make Record in consultation with Engineer-in-Charge. (b) Protective clothing as per IS and safety instructions are to be provided by the contractor and will be continuously in use of the Operator on duty. No extra payment shall be made to the contractor for the same. (c) The operator should have responsible for controlling valves and confirm the supply of water reached to the end point. (d) SHIFT DUTIES (TIMMINGS) (i) Morning Shift : 0600 Hours to 1400 Hours (ii) Evening Shift : 1400 Hours to 2200 Hours (Note :– Minimum 01 Operator (Valveman cum Pump-Attendant) per shift)

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

SHRIYA CONSTRUCTION

shrilaxminarayan constructions

GULMOHAR CONSTRUCTION