MTPS I - Civil Circle - Construction of Security room with rest room for the use of Security guards in the FODPH area in 169W road side near compound wall at MTPS I

Amount

Earthwork excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders with an initial lead of 10m and lift of 2m including all labour charges, all lead & lift, Head load lead, disposing the earth away from the site with a lead of 2km, all labour charges, all T & P’s etc., complete as directed by the Engineer at site.

Providing P.C.C.1:4:8 using 40mm size downgraded HBG stone jelly as per standard specifications and as directed by the Engineer at site including cost of all materials, labour charges, curing, all leads, lifts etc., complete.

Providing Brick work in CM1:5 using 2nd Class ground moulded chamber burnt Bricks as directed by the Engineer at site including cost of all materials, all labour charges, all leads & lifts, disposing of debris, all T&P's, curing etc., complete.

Providing Plain Cement Concrete 1:2:4 using 20 mm downgraded HBG metal for flooring, plinth beam including cost of all materials, labour, lead, lift, all T&P’s, curing etc., complete.

Providing centering and shuttering with necessary strutting arrangements for the sides, end soffits for RCC slabs, lintels, beams as directed by the Engineer at site including cost of all required materials and conveyance of materials to site, all labour charges, lead, lift etc., complete.

Supplying and fabrication of RTS/MS rods for reinforcement to the damaged sunshades as directed by the Engineer at site including cost of rods, binding wire, labour charges, leads, lifts and T&P's etc., complete

Providing RCC 1:1.5:3 mix using 20mm downgraded HBG stone jelly as per standard specifications and as directed by the Engineer at site including cost of all materials, labour charges, curing, all leads, lifts etc., complete.

Supplying, laying and joining of PVC pipes of required withstanding pressure conforming to ISI specification including dismantling of damaged AC pipes, fixing of PVC pipes with required specials, dismantling Brickwork, concrete where ever necessary and fixing of PVC pipes to the walls with necessary GI clamps, plugs, and screws, making good the dismantled portion to original condition with necessary brickwork and plastering with cement mortar mixed with water proofing compound where ever necessary including cost of PVC pipes, PVC specials, all labour charges, scaffolding charges, fixing the pipe with walls using G.I.clips & clamps, all safety appliances, all lead, lift, etc., complete as directed by the Engineer at site.

110 mm dia (OD) PVC pipe for rain water down fall pipe (4 Kg/ cm2)

50mm dia (OD) PVC pipe for overflow pipe from overhead tank (4 Kg/cm20

Plastering with CM 1:5, 12mm thick for brick work inner surfaces of all walls including cost of all materials, scaffolding charges, Labour charges, curing, Lead, Lift, T&P etc., complete

Plastering with CM 1:3, 10mm thick for all ceiling surfaces, including cost of all materials, scaffolding charges, Labour charges, curing, Lead, Lift, T&P etc., complete

Supplying and fixing of new G.I.pipes of medium class (B class) G.I. Pipe conforming to IS 1239 as directed by the Engineer at site including cost of all materials, specials, fixing the above with walls with galvanized iron clips, all lead and lifts, scaffolding, safety appliances, dismantling of worn out GI pipes etc., complete.

32 mm dia GI 'B' class pipe

25 mm dia GI 'B' class pipe

Supplying and fixing of gun metal gate valve of ISI make (Heavy Duty) as approved by the Engineer at site including cost of all materials, T&P's labour charges for fixing etc., all leads and lifts etc., complete.

32mm dia (Heavy Duty) Gun Metal gate valve of ISI make.

25 mm dia (Heavy Duty) Gun Metal gate valve of ISI make.

Supplying and fixing of Laminated PVC door with frame with panelled door shutters hollow type with 200x20mm panels with 1 mm wall thickness for panels and styles and top and bottom rails of suitable size with 2mm wall thickness suitably reinforced using MS angle/ Flats including cost of necessary Aluminium hinges and other furniture fittings including cost of transporting, lifting and fixing, cost of all materials, labour charges including fixing, lead, lift etc., complete.

Supplying and fixing of M.S.Door / MS Window of shutter frame & stiffeners of using MSA 35X35X6MM panelled with M.S.Steel shutter of 18 gauge for M.S Door and bottom shutter of window and top shutter of window fixed with 4mm thick glass and fixing with outer frame of size MSA 35X35X6mm as directed by the Engineer at site including cost of all materials, labour, lead, lift charges etc., complete.

Providing floor finish with stain free nano polished vitrified tiles of approved make, colour and quality of 600x600x8mm over 10mm thick Cement mortar 1:3 bedding and pointing with same coloured cement in all floors for Bath and Toilet, cutting chase in walls wherever required, cost of all materials, labour charges lead, lift, curing, T&P etc., complete

Dadooing the walls with ceramic glazed tiles of approved make, colour and quality and size 305x305x6mm over 10mm thick CM 1:3 bedding and pointing with same coloured cement in all floors for Bath, toilet for a height of 2.40m and above kitchen platform including cutting chase in walls wherever required, finishing neat including cost of all materials, labour, lead, lift, curing etc., complete

Supplying & fixing of white colour Oriya type Indian water closet 580mm x 440mm with ‘P’ or ‘S’ trap of approved make and quality including cost of water closet with all accessories, labour charges, lead, lift, etc., complete as directed by the Engineer at site.

Supplying and Fixing the urinals lipped mouth porcelain flat back urinal with all accessories such as 32mm dia Bell mouth PVC connection, 15mm dia G.M wheel value, 15mm dia ‘B’ Class waste water pipe, 15mm dia nylon connection, 15mm dia brass nipple etc., as per standard specifications and as directed by the Engineer at site including cost of all materials, labour charges, lead, lift T&P, curing, etc., complete.

Refilling with excavated soil (other than sand) complying with standard specification for filling in foundation and basement as per standard specifications and as directed by the Engineer at site including cost of all materials, labour charges, lead, lift, etc., complete.

Supplying and filling of 40mm HBG stone jelly as directed by the Engineer at site including cost of all materials, labour charges, lead, lift, etc., complete.

Supplying and fixing of readymade RCC Jolly 30/50 mm thick for ventilator, including cost of all materials, all labour charges for fixing the jolly & finishing the sides neatly, all leads and lift etc., complete.

Supplying and fixing of ventilating pipe of 110mm dia PVC rigid pipe with pressure 4kg/cm2 with PVC cowl of approved quality to the required height including cost of materials, labour charges, lead, lift, etc., complete.

Supplying and fixing of wash hand basin of size 550x400mm with all accessories such as cast iron brackets, 32mm dia CP waste coupling rubber plugged chain, 32mm dia B class GI waste pipe, 15mm dia GM wheel valve, 15mm dia nylon connection,15mm dia brass nipples, 15mm CP pillar tap of approved make and quality as directed by the Engineer at site including cost of all materials, all labour charges, all lead & lift, cement mortar, transporting charges etc., complete

Supplying and fixing of PVC Sintex water tank 1000 litres capacity of ISI (or) equivalent make of approved quality including cost of all materials, labour charges, lead, lift and complete.

Providing and placing in position of screed Cement Concrete in CC1:1.5:3 using 12 mm downgraded metal for floor finishing, roofing etc., including cost of all materials, labour, lead, lift, all T&P’s, curing etc., complete.

Wiring with 2x1.5 sqmm (22/0.3) & 2x4sq mm (56/0.3) PVC insulated SC unsheathed cu. Conductor of 110v grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection for making good of concealed portion with suitable color of PVC concealed light point -9 points and fan point -2 points.

Supplying and fixing of WT bulk head fitting with guard (Philips / Bajaj / CG / K.lite) suitable for incandescent lamp with 100w bulb cost of cables, lead, lift etc., complete.

Supplying and fixing of 4 ft x 40 Watts box type single fluorescent fitting with copper choke and condenser with TW round blocks on wall / ceiling with ISI mark a per specifications and as directed bythe Engineer incharge at site including flu tube with PVC unsheathed copper leads from terminals to the fitting cost of cables, lead, lift etc., complete.

Supplying and fixing of 1200mm (48”) AC ceiling fan (CG/Bajaj/Usha) completed with 300mm down rod on the existing clamp cost of cables, lead, lift etc., complete.

Supplying and fixing of three phase watt hour meter 400 v 50HZ unbalanced load 4 wire 50Ams including cost of all accessories required for fixing of meter, cost of cables, lead, lift etc., complete.

Supplying and fixing of AC Exhaust fan 300mm (12") sweep heavy duty confirming to IS Specifications with all required accessories like switch box, switches including cost of all accessories required for fixing of meter, cost of cables, lead, lift etc., complete.

White washing with two coats of white cement for inner wall surfaces, ceiling surfaces including cost of all materials, scaffolding, Labour, Lead, Lift etc., complete.

Colour washing with two coats of Cement paint over a coat of white cement for the exterior surfaces including cost of all materials, scaffolding, Labour, Lead, Lift etc., complete

Painting with two coats of enamel paint of approved quality and colour including cost of all materials, brushes, lead, lift, all safety appliances etc., complete.

UNIVERSAL ENGINEERING