Comprehensive repair work to OTM accn LAB ATA RA and EA and other connected items EM for 39 FAD Bharatpur

Amount

Dismantling/demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M & L of brick work with sub-class 'B' bricks, straight or curved on plan exc 6 metre mean radius as wall built in cement & sand mortar 1:6 complete all as specified and as directed.

M&L Demolition of of stone /boulder masonary , built in lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L Walling of random rubble, brought upto course well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed.

Ditto all as item no 04 above but except stone complete all as specified and as directed.

M & L for Rendering 15 mm thick in cement and sand mortar 1:4, mixed with water proofing compound as per manufacturer’s instructions, on fair faces of brick work or cement concrete surfaces including finishing the surface even and fair including taking down cement or cement lime plaster of any description from brick or stone walls complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of this schedule.

M & L for Rendering 5 mm thick on fair faces of concrete surfaces as in ceiling in cement mortar 1:3 finished even & smooth without using extra cement including taking down cement or cement lime plaster of any description from brick or stone walls complete all as specified and as directed.

M & L for Rendering 10 mm thick in cement and sand mortar 1:6, on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster of any description from brick or stone walls complete all as specified and as directed.

Supply only liquid water proofing compound ISI Marked complete all as specified and as directed.

M & L for Rendering 10 mm thick in cement and sand mortar 1:6, on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of newly plastered of walls and applying two coats of oil emulsion distempering white or tinted (copolymer based resin glue to be added for longer durability and better finish) using hand roller over one coat of water based white pigmented alkali resistant priming paint conforming to IS:109-1968, over wall Surface including all necessary arrangement for execution of work. Make : NEROLAC/DULUX/BERGER.

M&L for preparation of newly plastered surfaces of walls and applying two coats of Exterior acrylic emulsion paint over one coat of water based white pigmented exterior acrylic priming paint for external wall on external Wall Surface , complete all as specified and as directed.

Preparation of new plastered/ un-plastered surface of wall including cornices, pilasters etc and applying two coat of cement based paint using hand roller, over one coat of water based white pigmented alkali resistant priming paint conforming to IS:109-1968, of approved colour/camouflaging pattern complete all as specified and as directed by Engineer-in-Charge. Make : NEROLAC/DULUX/BERGER

Dismantling and S & F Rotational moulded polyethylene water storage tanks in triple layer, white with treaded type cover lid of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed. Notes : (i) The water storage tanks shall be 3 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water.(ii) The tanks shall be ISI marked. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.(iv) HDPE storage tanks shall be procured from the manufacturers as per Appendix “B”.)

All as per Seiral item No 15 here in before but capacity 1000 Litres complete all as specified and as directed.

S & F Ball valves 20 mm bore, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

M & L of disconnectiong existing tanks, setting aside (or lowering ir required) for repairs, cleaning etc and hoisting if required re-connecting and re-fixing in position of capacity exc. 250 ltr but not exc 500 ltr (cleaning repairing etc measured and paid separately) complete all as specified and as directed.

Cleaning and removing all scale , dirt etc form tanks and from mouths of circulating pipe etc of capacity exc 250 lts but not exc 500 ltr with gunny bags and sands cleaning with fresh water and bleaching powder complete all as specified and as directed.

M & L of disconnectiong existing tanks, setting aside (or lowering ir required) for repairs, cleaning etc and hoisting if required re-connecting and re-fixing in position of capacity exc. 500 ltr but not exc 1000 ltr (cleaning repairing etc measured and paid separately) complete all as specified and as directed.

Cleaning and removing all scale , dirt etc form tanks and from mouths of circulating pipe etc of capacity exc 500 lts but not exc 1000 ltr with gunny bags and sands cleaning with fresh water and bleaching powder complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings laid in any description and any position n.exc 15 cm thickness (below or above GL) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the remises complete all as specified and as directed.

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/path laid in panel surface finished even and fair without using extra cement complete all as specified and as directed.

M&L for 100 mm thick 1:2:4 type B-1 (using 20 mm graded stone aggrgate) finished even and smooth using extra cement complete as as specified and as directed.

M&L for 18 - 20 mm thick black machine cut granite slab (of any type) (table rubbed and polished), as in steps, jambs, pillars, window- cills, cooking platform set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab laid over and including 15 mm thick cement screed in cement and sand mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for 18-20 mm thick 595 x 595 mm kota stone slab as in flooring/steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed.

M & L for 15 mm thick machine cut kota stone slabas on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in colored cement to match the shade of marble over and including laid over 10 mm thick rendering in cement and sand mortar 1:4 on fair faces of brick work or concrete surfaces finishing rough to receive wall, tiles complete all as specified and as directed.

M&L Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished area of each tiles not exc. 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement to match the floor laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified

M&L for non skid, ceramic coloured tiles 7 to 8 mm thick (square/rectangular), area of each tile exc 0.11 sq. m but n.exc 0.18 sq. m, in floors etc. laid over 15 mm thick screed bed in CM 1:6 and set and jointed in neat slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface of size 450x350x7mm/350x250x7mm thick, laid over 15 mm thick screed bed in cement mortar (1:6) and set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed.

Dismantling of roofing corrugated, or semi-corrugated sheets or plain steel sheets in roof covering of any thickness and description complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated, semi corrugated or trapezoidal profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S & F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S & F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde-E-250) quality A complete all as specified and as directed.

S & F Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and as directed.

M & L 4 mm thick high pressure steam cured non asbestos fibre cement designer building boards fixed or laid/inserted to timber / GI / Aluminium frame work with screws in ceiling flat or sloping complete all as specified and as directed. (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed.

S & F anodised aluminium snap grid frame work of size of grid 605x605mm for false ceiling suspended and fixed complete all as specified and as directed.

S&F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F for PVC wall panelling in repair with panel of 300 mm x 6 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC ange fixed with solvent cement complete all as specified as manufacturer's Instructions complete as as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description, area exceeding 1.00 sqm and n.exc 2.00 sqm each complete all as specified and as directed.

Taking down shutters of any description, area exceeding 2.00 sqm each complete all as specified and as directed.

Taking down shutters and refixing in the same opening, of any description, area exceeding 1.00 sqm and n.exc 2.00 sqm each complete all as specified and as directed.

Taking down shutters and refixing in the same opening, after easing and adjusting of any description, area exceeding 2.00 sqm each complete all as specified and as directed.

Labour only for Resecuring or easing & adjusting, without taking down of shutters of any description n exc 1 sqm each complete all as specified and as directed.

Labour only for Resecuring or easing & adjusting, without taking down of shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.

Labour only for Resecuring or easing & adjusting, without taking down of shutters of any description area exceeding 2.00 sqm each complete all as specified and as directed.

M & L for powder coated anodised aluminium framed for doors, windows, ventilators with one or more rebates including aluminium channels for sliding shutters, jointing cleats for fixing etc complete all as specified and directed. (Thickness of powder coating not less than 50 micron).

S&F powder coated anodised Aluminium window/ ventilator shutters side hungs type with sash, aluminium section weight not less than 0.55 kg/m including necessary joining cleats, rubber neoprene packing aluminium snap beading, screws anodized aluminium fittings such as peg stay 150 mm long (1 No) suitable , type B-21 hinge 100mm long (2 No), handle (1 No) etc each leaf complete all as specified and directed. (Thickness of powder coating not less than 50 micron).

S&F powder coated anodised Aluminium door shutters with aluminium section weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, aluminium snap beading, screws anodized aluminium fittings such as 02 Nos aluminium handle each door, hinges, beading clips etc complete all as specified and directed. (Thickness of powder coating not less than 50 micron).

S&F aluminium deco grill in door and windows with weight not exceeding 1.00 Kg/Sqm including necessary arrangement for fixing etc as specified and directed.

Repairing of existing aluminium door single leaf exc 1.00 Sqm but nexc 2.0 sqm including oiling and greasing of floor springs and making the door and shutter serviceable complete all as specified.(Floor door springs where renewed shall be measured and paid separately under appropriate complete as as specified and as directed

Repairing of existing aluminium door single leafexc 1.00 Sqm but nexc 2.0 sqm including taking down all members , sheet glass of any thickness cleat , neosprene rubber beading and resecuring all sections & tightening all joints incl fixing new small cleats etc eac nexc 100 mm and refixing all members , sheet glass , aluminum cleat but new neosprene rubber beading (paid under seperate item ) and making the door and shutter serviceable , including fixing on Hinges complete all as specified.(Floor door springs, Neosprene rubber beading , Hinges Door Closer where renewed shall be measured and paid under seperate Item

S&F for 4.80 mm thick sheet glass with solar control film 25 micron reflective type sticked to glass pane ,ordinary quality and glazing with neosprene beading exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe 410-W (Gde-E-250) quality -A) complete all as specified and as directed.

S & F of 35 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F of 35 mm thick, IInd class hard wood (Bonsum/Hollock), glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.24(a) complete all as specified and as directed.

S&F of 1.00 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning upmitred angles etc as required complete all as specified and as directed.

S&F for 0.56 mm thick aluminium alloy sheeting fixed with screw on door shutter complete all as specified and as directed.

S & F factory made solid PVC moulded door shutter 28 to 30 mm thick (style) with 2 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face and 2 mm prelam PVC sheet on back face in the frame at site, as per specifications and drawing complete all as specified and as directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick one side prelam PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS Square tube of size 19x19mm. The profile shall be cut and mitred at two corners and joinery by inserting two numbers of 150mm long brakets of 15x15mm MS tube inside the 19x19mm MS tube and suitable sorched complete all as specified and as directed.

S & F of Butt hinges medium weight, cold rolled mild steel 100 mm size complete all as specified and as directed.

S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt, 200 mm long complete all as specified and as directed.

S&F MS sliding door bolt, plate type, stove enamelled, black with bright bolt not less than 12mm dia, length of bolt 300 mm, including a minimum of 6 bolts, nuts and washers, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F Mild steel pressed handles, 150 mm long, oval type, stove enamelled, black, ISI marked complete all as specified and as directed.

S & F of Butt hinges, 100mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and as directed.

S&F aluminium, anodised, 150mm long barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F aluminium, anodised handle 100mm size cast type anodised complete all as specified and directed.

Supply & fixing in repair Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete as as specified and as directed.

S&F Door closer hydraulically regulated designation No 3, univeral type, of aluminium (extruded section body) suitable for door shutters of 851 to 1000 mm in width and of weght between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair Factory made steel windows with side hung shutters including box type hinges with steel handle of MS flat 25x5mm and 2 Nos steel tower bolts, 100mm long fixed to shutter complete with and including glazing bars, dovetailed or welded and also including with one shop coat of red oxide Zinc-Chromate primer complete all as specified and as directed.

All as per Srl Item No 76 here in before but Without Glazing bar, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame or stone or concrete or bricks surrounds glazesd with putty, taking out old pins punching or drilling out, complete all as specified and as directed.

S & F Sheet glass 4 mm thick, ordinary quality & glazing with oil putty in squares n.exc 0.5 sqm in each pane including provision of glazing pins/spring clips, complete all as specified and as directed.

Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed by Engineer-in-Charge. Note: Cost of supplying wooden beads/ MS flat (as applicable) for fixing wire gauze in panels shall be deemed to be included in respective items of joinery /steel windows. However, fixing wire gauze with beads/ flat supplied with joinery/ steel window shall be deemed to be included in this item and nothing extra shall be admissible on this account.

Ditto all as per Srl Item No 80 here in before but fixed in repair complete all as specified and as directed.

S&F in repairs tower bolt Aluminum anodised of 200 mm long complete all as specified and as directed.

S&F in repair mild steel sliding bolt of any description and type of size 300mm long complete all as specified and as directed.

S&F in repair mild steel sliding bolt of any description and type of size 600mm long complete all as specified and as directed.

S&F in repair MS butt hinges medium weight cold rolled of size 100mm complete all as specified and as directed.

S&F in repair Aluminium anodised with galvanised mild steel hinge pin butt hinges of size 100mm complete all as specified and as directed.

S & F repair 150mm mild steel (Helical door spring) ordinary spring including with necessary welding work complete all as specified and as directed.

Repairing of existing aluminium door single leaf exc 1.00 Sqm but n exc 2.0 sqm including taking down all members , sheet glass of any thickness cleat , neosprene rubber beading and resecuring all sections & tightening all joints incl fixing new small cleats etc nexc 100 mm and refixing all members , sheet glass , aluminum cleat but new neosprene rubber beading (paid under seperate item ) and making the door and shutter serviceable , including fixing on Hinges complete all as specified. (Floor door springs, Neosprene rubber beading , Hinges Door Closer where renewed shall be measured and paid under seperate Item).

Ditto all as per Srl item No 88 above but door shutter but n exc 1.00 sqm complete all as specified and as directed.

Supply Only neosprene rubber beading suitable for aluminium door / window panels complete all as specified and as directed.

Supply Only Aluminium alloy Hinges 100 mm complete all as specified and as directed.

Supply only 125 mm Aluminium alloy Handle complete all as specified and as directed.

S&F EPDM rubber strip of width 2 cm suitable for 1mm to 2 mm gap , fixed with adhesive like Fevicol pasting alongwith blue tag type nails complete all as specified and as directed .

S&F Aluminium Door seal of overal size 42 mm having nylon brush of 20 mm fixed on aluminium body strip of 22 mm, fixed with screw on Aluminium door, wooden shutters or PVC shutters complete all as specified and as directed .

S&F for Rubber door seal of overall size 35 mm fixed screw on wooden or PVC Shutters complete all as specified and as directed .

Supply & fixing in repair Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.

S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size complete all as specified and as directed.

S & F in repair for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring complete all as specified and as directed.

M&L for welding in repairs exc 2.5 cm but n exc 5.0 cm in length over metal to be welded n exc 6mm thick complete all as specified and as directed.

M&L for welding in repairs exc 2.5 cm but n exc 5.0 cm in length over metal to be welded exc 9mm but n exc 20 mm thick complete all as specified and directed.

M&L for Painting to new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces, priming with pink primer (one coat) & finishing with two coats of synthetic enamel paint complete all as specified and as directed.

M&L for Painting to old wood or wood based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces,finishing with one coat of synthetic enamel paint complete all as specified and as directed.

M&L for Painting to new steel or steel based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces, priming with red oxide zinc chrome primer (one coat) & finishing with two coats of synthetic enamel paint complete all as specified and as directed.

Painting to old steel or steel based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces, finishing with one coat of synthetic enamel paint complete all as specified and as directed.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and connections, 25 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed. .

Refixing old steel GI tubing and connections in new or old position with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed.

Refixing old steel GI tubing and connections in new or old position with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed.

S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed.

S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed.

S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified and as directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm including complete all as specified and as directed.

S&F in repair Bib tap, cast copper alloy Chromium Plated fancy type/ long body with crutch or butterfly handle, screwed down, suitable for 15mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified and as directed.

S&F in repair pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shank and fly nuts, with or without lettered "Hot" or "Cold" suitable for 15mm nominal bore iron pipe, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 15 mm bore stop angle valve, cast copper alloy, chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 25 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions complete all as specified and directed.

Cutting or uprooting grass incl removing old mud phuska/ roof treatment of any thickness and description, removing rubbish off the premises, cleaning surface and preparing to receive new treatment complete all as specified and directed.

M&L for screed bed or bedding layer of cement mortar 1:4, 20 mm thick finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing surfaces for roof treatment by removing all loose gravel, dirt, oil, grease and foreign matter by jet of dry air and clean the surfaces mechanically or by grinding to make it smooth before application, repair all cracks by cutting "V" groove and fill with PMC mortar (Polymer modified cement mortar) prepared by cleaning free from dust and loose particles and apply on dry surface first coat of crack fillar using putty knife or trowel allow to dry for 4 to 6 hr, afterthat apply second coat and dry for 4-6 hrs in ratio as per manufacturers specification, provide 75 mm x 75 mm coping made out of PMC mortar as above on all joints of vertical upstands to ensure that moisture content in the prepared surface does not exceed 5% immediately before application of liquid membrane. Material incorporation & Protection be provided as Terrasheild first apply with water (ratio terrasheild : water will be 4:1) as primer with coverage area 0.1 Kg per Sqm. After 2-3 hour later, second step apply directly first coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm with roller.Spread non woven geo textile of 40 / 50 gsm with overlap of 50 mm in both direction when the surface is still tacky. After 4-6 hour later, apply third step apply directly second coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm with roller. final thickness of complete treatment should be minimum 1.0 mm. Water tank and Khurra location one additional coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm be provided. after complete application full curing minimum 7 days . Above complete application will be done authorized apllicator from Manufacturer and manufacturer's specification. .

Taking down carefully copper/aluminium point wiring (light, fan, bell,same board, independent or power) complete fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of wall, floor & ceiling etc complete all as specified and directed.

Dismantling of old U/S sub main wiring and service wire of any size complete all as specified and directed.

Dismantling of old U/S rusted main switch/DB of any size capacity complete all as specified and directed.

M&L conceled point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in PVC conduit pipe size not less than 20 mm dia with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface and making good the disturbed surfaces of wall/ceiling by means of Wall putty and matching colour of existing wall, PVCsleevel/dash fastners with cadmium plated screws including suitable size of PVC boards/ sunken box for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed for the following :-

One light point controlled by one way switch complete all as specified and directed.

One ceiling fan/wall fan/exhaust fan point controlled by one way switch complete all as specified and directed.

One 3 pin 6 Amp socket point outlet on the same board with other switches complete all as specified and directed.

One 3 pin 6 Amp socket point outlet on the independent board complete all as specified and directed.

All as per item No 126 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps switch socket outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified and directed.

S&F ceiling rose surface bakelite 50 x 40 mm three terminal ISI marked including suitable size of PVC board .

S & F Lamp holder, PVC/polycarbonate type with cord grip cap suitable for pendant fitings complete all as specified and directed.

S & F stepped type electronic fan regulator flush type 230 volt, 100 watt on the existing phenolic laminated sheet etc. complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 Amps multi purpose flush type 230 volt complete all as specified and directed.

S&F switch piano flush button single pole one way 6 Amps 230 volt grade complete all as specified and directed.

S&Fswitch, 15 Amp flush type, complete all as specified and directed.

S&F socket 3 pin 15/16 Amps flush type, complete all as specified and directed.

M&L submain wiring complete with 2X 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor and one run of 4 Sqmm copper cable for earth continuity conductor and including rigid PVC conduit with all PVC accessories fixed on concealed surface complete.

Distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt of the following DBs.

8 way SPN with 200 amps rated busbar 240 volts (double door type complete all as specified and directed..

4 Way SPN with 200Amp rated busbar 240V (Double door type)

S&F MCCB/MCB 415/240 volts fixed in DB's of the undermentioned type and rating complete all as specified and directed.

MCB TPN 63 Amps 415 volt, Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828) complete all as specified and directed.

MCB TPN 32 Amps 415 volt, Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828) complete all as specified and directed.

MCB SP 6-32 Amps, 240 volts,Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828) complete all as specified and directed.

MCB SPN 40 Amps, 240 volt,Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828) complete all as specified and directed.

Taking out old unsv T/L and Supply & fixing LED 20 watt LED tubelight fitting retro fit type with replacable rod complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified and directed.

M & L earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15 mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM sheet (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 2 Nos and with 8mm dia MS bar handle made to shape, GI pipe medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, complete all as specified in electrical plate No 3 of SSR Part I and connection to earth test point including testing on complete all as specified and directed. Note :- The cost of funnel pipe of 20 mm GI light grade pipe and protection pipe of 15mm bore GI light grade is deemed to be included in quoted unit rate.

Supply and fixing in repair of LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S & F in repair of street light GI bracket of 0.6 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole complete all as specified and directed.

S&F in repair of 35/36 watts LED street light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source with warranty option of 5 years and suitable drivers etc and connecting with 2.5 sq mm solid aluminium conductor PVC insulated twin core weather proof cable from fittings to over head lines or to the jucntion box and fixing to complete all as specified and directed

S&F in repair of modular enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of SP 25 Amps, 240 volts complete all as specified and directed.

Taking down U/S plug top and S&F new 3 pin plug top 16 amps, 230 volts, ISI marked complete all as specified and directed.

Taking down U/S plug top and S&F new 3 pin plug top 5 amps, 230 volts, ISI marked complete all as specified and directed.

M/s Gupta Traders

GANGA CONSTRUCTION

PD GUPTA AND COMPANY