Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-AOC | ₹3.5 L | L1 | Accepted-AOC L1 |
| 2 | L2₹3.6 LRejected-AOC | ₹3.6 L | L2 | Rejected-AOC L2 |
| 3 | L3₹3.6 LRejected-AOC | ₹3.6 L | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | ISHU TRADERS AND COMPANY L3 | AMBA ENTERPRISES L2 | SUYASH IMPAX L1 |
|---|---|---|---|---|---|---|
| 1.00PART-A | ||||||
| 2.00Carriage of following line materials for 11 kv/LT line from Store Center, Lalitpur to the Site of work including measuring weiging loading unloading at both ends and proper stacking at safe site. | ||||||
| 3.00 | 11 KV COMPOSITE POLYMER PIN INSULATOR | 230 | No | 690 ₹814.20 | 460 ₹542.80 | 460 ₹542.80 |
| 4.00 | 11 KV Cross Arm Clamp for 11M STP | 3 | No | 9 ₹10.62 | 6 ₹7.08 | 6 ₹7.08 |
| 5.00 | 11 KV POLYMER DISC INSULATOR (T&C) 45 KN | 124 | No | 372 ₹438.96 | 248 ₹292.64 | 248 ₹292.64 |
| 6.00 | 11 KV STAY LOOP INSULATOR | 50 | No | 150 ₹177 | 100 ₹118 | 100 ₹118 |
| 7.00 | 11 KV V-TYPE STEEL CROSS-ARM 65X65X6 MM | 59 | No | 177 ₹208.86 | 118 ₹139.24 | 118 ₹139.24 |
| 8.00 | A.C.S.R. WEASEL CONDUCTOR | 12,546 | M | 11,918.7 ₹14,051.52 | 31,365 ₹37,010.70 | 62,730 ₹74,021.40 |
| 9.00 | DANGER BOARD WITH CLAMP FOR 11 KV LINE | 46 | No | 138 ₹162.84 | 92 ₹108.56 | 46 ₹54.28 |
| 10.00 | DISC FITTING 45KN (T&C) | 81 | No | 243 ₹286.74 | 162 ₹191.16 | 162 ₹191.16 |
Tender Value
₹3.6 L
EMD Value
₹3,600
Closing Date
22 Aug 2025, 12:00 pmClosed
Superintending Engineer, EDC, Lalitpur
Behind of LIC Office, Elite Crossing, Jhansi Road, Lalitpur
Construction of Line and Substation for giving Service Connection to HighSchools
2025_DVVNL_1063253_1
05/EDC(L)/2025-26
Open Tender
Electrical Works
120 days
Lalitpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,180
Superintending Engineer, EDC, Lalitpur
₹3,600
21 Jan 2026
6 Aug 2025
22 Aug 2025
6 Aug 2025
22 Aug 2025
6 Aug 2025
PART-A
Carriage of following line materials for 11 kv/LT line from Store Center, Lalitpur to the Site of work including measuring weiging loading unloading at both ends and proper stacking at safe site.
11 KV COMPOSITE POLYMER PIN INSULATOR
11 KV Cross Arm Clamp for 11M STP
11 KV POLYMER DISC INSULATOR (T&C) 45 KN
11 KV STAY LOOP INSULATOR
11 KV V-TYPE STEEL CROSS-ARM 65X65X6 MM
A.C.S.R. WEASEL CONDUCTOR
DANGER BOARD WITH CLAMP FOR 11 KV LINE
DISC FITTING 45KN (T&C)
EARTH ROD 2540X20 MM
G.I.WIRE 4/6/8 SWG
Gaurding Angle 50x50x5x2500 mm
GAURDING ANGLE CLAMP
LT PIN CLAMP FOR PCC POLE
M.S. DROPPER CHANNEL 100X50X5X2028 MM
M.S. Top Channel I00x50x5x2240 mm
MS T-OFF CHANNEL 100X50X5X1300 MM
NUTS & BOLTS
PCC POLE 8.5 MTR.LONG
STAY SET 16X1800
STAY WIRE 7/10 SWG
11KV STAY CLAMP
STONE PAD 300X300X75MM
STP Pole 11 Mtr.
T/F BASE ANGLE 65X65X6X2028 MM
25 KVA 11/0.4 KV TRANSFORMER NEW
16KVA T/f New
11 KV Cross Arm Clamp for PCC Pole 8.5 M
11 KV DP Clamp for PCC Pole 8.5 Mtr
11 KV F Clamp for PCC Pole 8.5 Mtr Long
TOP CHANNEL/DROPPER CHANN. HOLDING CLAMP
EYE BOLT WITH NUT
LUG. ALU.150 SQ.M.M.
FUSE SET 11 KV
G.I.BARBED WIRE
NUMBER PLATE WITH CLAMP , N&B
SE. ALUM. WINDING WIRE 14 SWG
11KV F-CLAMP FOR STP POLE
CROSS ARM HOLDING CLAMP FOR STP
11KV TPMO
PART-B
Erection of the following supports after making of pits as per RESSPO norms & filling of pits by concrete of ratio 1:4:8 (cement brick balast & sand). Fitting of all accessories as cross arm, top channel, bracing angle, pin insulator, disc insulator, danger board, number plate, barbed wire & clamps etc. Plinthing of support above 300mm ground level by concrete of ratio 1:4:8 (cement brick balast & sand) will be done at the time of erection of pole. Painting of PCC Pole structure as per RESSPO norms also (all type of paints, red oxide primer, nut, bolts & grouting material etc. will be provided by contractor).
11 KV COMPOSITE POLYMER PIN INSULATOR
11 KV Cross Arm Clamp for 11M STP
11 KV POLYMER DISC INSULATOR (T&C) 45 KN
11 KV STAY LOOP INSULATOR
11 KV V-TYPE STEEL CROSS-ARM 65X65X6 MM
A.C.S.R. WEASEL CONDUCTOR
DANGER BOARD WITH CLAMP FOR 11 KV LINE
DISC FITTING 45KN (T&C)
EARTH ROD 2540X20 MM
G.I.WIRE 4/6/8 SWG
Gaurding Angle 50x50x5x2500 mm
GAURDING ANGLE CLAMP
LT PIN CLAMP FOR PCC POLE
M.S. DROPPER CHANNEL 100X50X5X2028 MM
M.S. Top Channel I00x50x5x2240 mm
MS T-OFF CHANNEL 100X50X5X1300 MM
NUTS & BOLTS
PCC POLE 8.5 MTR.LONG
STAY SET 16X1800
STAY WIRE 7/10 SWG
11KV STAY CLAMP
STONE PAD 300X300X75MM
STP Pole 11 Mtr.
T/F BASE ANGLE 65X65X6X2028 MM
25 KVA 11/0.4 KV TRANSFORMER NEW
16KVA T/f New
11 KV Cross Arm Clamp for PCC Pole 8.5 M
11 KV DP Clamp for PCC Pole 8.5 Mtr
11 KV F Clamp for PCC Pole 8.5 Mtr Long
TOP CHANNEL/DROPPER CHANN. HOLDING CLAMP
EYE BOLT WITH NUT
LUG. ALU.150 SQ.M.M.
FUSE SET 11 KV
G.I.BARBED WIRE
NUMBER PLATE WITH CLAMP , N&B
SE. ALUM. WINDING WIRE 14 SWG
11KV F-CLAMP FOR STP POLE
CROSS ARM HOLDING CLAMP FOR STP
11KV TPMO
AMBA ENTERPRISES (BID ID -5470919)
ISHU TRADERS AND COMPANY (BID ID -5470884)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid