Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.2 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹35.9 L+₹2.9 L (8.71%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹36.0 L+₹2.9 L (8.82%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹36.8 L+₹3.7 L (11.3%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹46.1 L+₹13.1 L (39.6%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS PIN-913862 C/o 56 APO
Certain repair to security wall and fencing under AOR of AGE B/R Dett A under GE 862 EWS
2022_MES_534561_1
GER-29/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS
As per tender documents
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹80,000
Yes
6 Sept 2022
29 Jun 2022
29 Jul 2022
29 Jun 2022
27 Jul 2022
13 Jul 2022
Amount
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed.
M&L for stone walling of random rubble masonry, uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar (1:6), complete all as specified and directed.
M&L for stone walling of random rubble masonry (except stones, using old unserviceable stone after cleaning), uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar (1:6), complete all as specified and directed.
M&L for extra over stone walling of any type of stone for hammer dressing to face stones and dressing of face beds with maximum depression on face from straight edge held against the dressed surface n exc 40 mm and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.
M&L for rendering 20 mm thick on stone masonry surface on wall in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick on brick work or concrete surfaces on wall in cement mortar (1:4), mixed with WPC as per manufacture's instruction and finished the surface even even and smooth without using extra cement complete all as specified and directed Engr-in-Charge. (Note: WPC will be measured and paid for separately)
Supply only integral water proofing compound complete all as specifed and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over and including a coat of alkali resistand primer complete all as specified and directed.
M&L for preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and as directed by GE.
M&L for preparation of new plastered wall surfaces applying two coats of exterior weather coat paint of Appex ultima of Asian paints or its equivalent over an including a coat of alkali resistant paint complete all as specified and as directed by GE.
M&L for preparation of old plastered wall surfaces applying two coat of exterior emulsion weather coat paint ( Appex ultima of Asian paints or its equivalent) complete all as specified and as directed by GE.
S&F for pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions after dismantling of plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern in wall cladding complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for mild steel TMT bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as in stirrups, spacers and binders including binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for rainforced cement concrete (1:2:4) type B-1 (20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns and the like after demolition of reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground) complete all as specified and directed
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground as post embedded in concrete, brick work, masonry work etc complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance n exc 50m and making good surface in any type of soil complete all as specified and directed.
M&L for PCC type C2 (1:3:6), using 40 mm graded stone aggregates as in sub base, foundation filling and mass concrete of post complete all as specified and directed.
S&F for mild steel angle iron posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. (Note :- Size of angle shall be as per standard drgs).
S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) after dismantling of old unserviceble barbed wire complete all as specified and directed.
S&F for galvanised iron chain link fencing with 3.8mm to 4mm dia wire mesh size 50 X 50 x 3mm (as per sample approved by GE) after dismantling of old unserviceble chainlink fencing of any type complete all as specified and directed.
S&F for mild steel flat iron for securing chain link fancing with post/struts and fixed with nuts/bolts and similar item conforming to FE-410- (Gde-E-250) quality complete all as specified and directed.
S&F for mild steel round bars 10mm dia for securing chainlink fencing etc fixed to fencing posts complete all as specified and directed by Engineer-in-Charge as per Fe-410S or O after taking down old unserviceable round bars.
M&L for preparation of new or previously untreated steel surfaces any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for brick work using old size bricks sub class 'B', straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed.
S&F for concertina coil 1050 mm dia, 56 loops, 2.5mm core wire heavy galvanised (wire-275 GSM & strip-200 GSM), tensile strength of wire 1400-1500 N/Sqmm, weight 14.63 Kg/coil, stretchable length 12M inlcuding securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc after dismantling of old concertina coil of any type complete all as specified and directed.
S&F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and also fastening conforming to Fe-290 Gde E-165 after taking down of old mild steel frame work of any type and any locations complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level complete all as specified and directed.
S&F for polythene film 150 micron thick laid over and including a coat of bitumen primer @ 0.30 to 0.50 kg/sqm complete all as specified and directed.
M&L for flexural design mix cement concrete work in pavement/hard-standing of minimum flexural strength 40 kg/per square centimetre in field using 400 kg (minimum) of cement per cubic metre, thickness of concrete 25 cm or less all as specified and directed.
M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primeed and sealed with sealing compund grade-A thickness of concrete slab 250mm including providing 20mm dia mild steel dowel bars 50cm long (25cm in each slab) with ferrules, spaced at 300mm cetners, including boring formwork and preformed filler for dowels complete all as specified and directed.
M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound complete all as specified and directed.
M&L for 100mm thick PCC (1:4:8), type D-2 using 40mm graded stone aggregates as in sub base and mass concrete complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block (coloured) of any shape and size approved by EIC, ISI marked (IS:15658-2006) 80mm thick, M-40 grade (Heavy Traffic), in paths and hardstanding, with grey cement, laid tightly over & including 25mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern as approved by GE, complete after dismantling of old unserviceable interlocking pavor block of any type with protection all as specified and directed.
M&L for plain cement concrete type B-1 (1:2:4), (using 20 mm graded stone aggregates) in kerbs or mud stops rounder, chemferred on edges complete all as specified and directed.
M&L for plain cement concrete type C-2(1:3:6), (using 40 mm graded stone aggregates) in surface channels and drains complete all as specified and directed.
Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
M/S SV CONSTRUCTIONS
M/s Anil Engineers & Builders
M/S Narinder Pal Choudhary
CHAND CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .