Drilling borewell and providing fixing of Submersible motor with other accessories and laying pipeline near Madagalli and Basavanapura in Bogadi TP Limit (Reserved for Category I contractors)

Providng fixing of Submersible motor with other acessories to existing borewell and laying pipeline near Madagalli and Basavanapura in Bogadi TP Limit

Providing Submersible Pump Set of 150mm dia suitable for bore well andconfirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary amm...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Supply and delivery at site Brand new best make PVC insulated cable ofFlat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990with ISI Mark and as per its latest amendments: 1x3x4 Sqm...

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50mm (Bwssb SR 23-24 page no 154 Vol v SOR Code13.25.1)

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50mm (Bwssb SR 23-24 page no 154 Vol v SOR Code 13.24.1)

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm(PWD SR VOL vi Electrical items Item no 35.01, Page no 15)

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LT UG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 -- 16 S...

Laying of LT UG cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff -- 2.5 to 25 Sqmm (PWD SR VOL vi Electrical items Item no...

Optical Fibre Cable (OFC) and its Accessories - HDPE/PLB Pipe 40/33 mm (PWD SR VOL vi Electrical items Item no 66.05, Page no 30)

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 32A Bakelite DP (PWD SR VOL vi Electrical items 3.14.14 page no. 10 2023-2024)

Wiring for lighting/power circuit using one of FRLS PVC insulated, 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motor upto 20 HP capacities. (PWD SR VOL vi Electrical items 5.3 page no. 14 2023-2024)

Supplying, fixing and wiring 0to100A Direct Reading AC analog type Ammeter (PWD SR VOL vi Electrical items 5.25 page no. 18 2023-2024)

Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour.32A (PWD SR VOL vi Electrical items5.5.1 page no.14 2023-2024)

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws 20" x 20...

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped ...

Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board.(PWD SR VOL vi Electrical items5.22 page no.18 2023-2024)

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor. (PWD SR VOL ...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (PWD SR VOL vi Electrical items 5.38 page no.19 2023-2024)

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.63A (PWD SR VOL vi Electrical items 5.7.3 page no.14 2023-2024)

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.65 A (PW...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GIpipe 2.5m long buried in a pit.The pit should be f...

Supplying and fixing angle iron frame work fabricated out of M.S.angle iron..and M.S.Flat......with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint.40 x ...

Earth work excavation for pipeline trenches in all kinds of soils by mechanicalmeans as per drawing and technical specifications, including setting out,construction of shoring, strutting, barricading,...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments(Page No. 117/ 10.10.7/Bwssb CSR VOL-5 SR 202...

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendment (Page No. 118/ 10.11.7/Bwssb CSR VOL-5 SR 20...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour...