PROVISION OF DEFICIENT 16 UNIT MD ACCN FOR STUDENT OFFRS MAJOR AND ABOVE AT MILIT GIRINAGAR, PUNE

Schedule 'A' Part - I BUILDINGS & STRUCTURES This Schedule contains Sl item No. 1.01 to 1.03 which are not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only. The tenderer is required to quote their rates in Column 6.

Lumpsum price worked out by the contractor for Construction of block of 16 unit Married Accommodation for Student Officers, Major and above, Ground + four storey's including Servant quarters, Car parking, Officers Water Tank, Servat Water Tank and Fire Water Tank with RCC framed structure in permanent specification including all fittings and fixtures complete all as specified and as shown on drawings.

Lumpsum price worked out by the contractor for Construction of Septic tank of 100users in Brick Masonry including all fittings and fixtures complete all as specified and as shown on drawings.

Lumpsum price worked out by the contractor for Soakage well of 3.60metre dia and 4.50metre deep including all fittings and fixtures complete all as specified and as shown on drawings.

Lumpsum price worked out by the Contractor for "SITE CLEARANCE AND DEVELOPMENT” as listed in Schedule ‘A’ Part - II representing _______% ___________ percent Above / Below the lumpsum price of `16,21,225.77 inserted by the MES in Schedule ‘A’ Part - II

Lumpsum price worked out by the Contractor for “ROAD / PATH / CULVERT” as listed in Schedule ‘A’ Part - III representing _______% ____________ percent Above / Below the lumpsum price of `33,49,087.43 inserted by the MES in Schedule 'A' Part - III

Lumpsum price worked out by the Contractor for “AREA DRAINAGE” as listed in Schedule ‘A’ Part - IV representing __________ % ___________________ percent Above / Below the lumpsum price of `29,98,768.40 inserted by the MES in Schedule ‘A’ Part - IV

Lumpsum price worked out by the Contractor for “SEWAGE DISPOSAL” as listed in Schedule ‘A’ Part - V representing _______ % _______________ percent Above / Below the lumpsum price of `3,11,217.28 inserted by the MES in Schedule ‘A’ Part - V

Lumpsum price worked out by the Contractor for “SECURITY FENCING AND GATE” as listed in Schedule ‘A’ Part - VI representing ______% _____________ percent Above / Below the lumpsum price of `10,49,959.23 inserted by the MES in Schedule ‘A’ Part - VI

Lumpsum price worked out by the Contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - VII representing __________% _______________ percent Above / Below the lumpsum price of `4,79,654.18 inserted by the MES in Schedule ‘A’ Part - VII

Lumpsum price worked out by the Contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - VIII representing ______ % _________________ percent Above / Below the lumpsum price of `59,60,802.28 inserted by the MES in Schedule ‘A’ Part - VIII

Lumpsum price worked out by the Contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - IX representing ______ % _________________ percent Above / Below the lumpsum price of `3,59,558.62 inserted by the MES in Schedule ‘A’ Part - IX

Lumpsum price worked out by the Contractor for “EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - X representing ______ % _________________ percent Above / Below the lumpsum price of `9,30,503.59 inserted by the MES in Schedule ‘A’ Part - X

Lumpsum price worked out by the Contractor for “LIGHTENING PROTECTION” as listed in Schedule ‘A’ Part - XI representing ______ % _________________ percent Above / Below the lumpsum price of `1,90,266.60 inserted by the MES in Schedule ‘A’ Part - XI

Lumpsum price worked out by the Contractor for "FIRE FIGHTING” as listed in Schedule ‘A’ Part - XII representing ________ % ___________________ percent Above / Below the lumpsum price of `8,23,765.50 inserted by the MES in Schedule ‘A’ Part - XII

Lumpsum price worked out by the Contractor for “DG SET” as listed in Schedule ‘A’ Part - XIII representing _______ % ______________ percent Above / Below the lumpsum price of `59,161.35 inserted by the MES in Schedule 'A' Part - XIII

Lumpsum price worked out by the Contractor for “LIFT” as listed in Schedule ‘A’ Part - XIV representing __________ % ___________________ percent Above / Below the lumpsum price of `50,84,424.20 inserted by the MES in Schedule ‘A’ Part - XIV

Schedule 'A' Part - XV This Schedule is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6. This Schedule constitutes Sl. Item Nos. 16 to 59

INTERNAL WATER SUPPLY S&F, two way bib tap, cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed.

S&F, angular valve cast copper alloy screwed down high pressure with chromium plated fancy type screwed both ends for iron pipe or for unions of 15mm bore complete all as specified and directed.

M&L for 15mm bore dia brass chromium plated WHB mixer for mixing hot & cold water screwed down for iron pipe including central hole basin mixer with popup waste system with 450mm long braided hoses and fixed complete all as specified and directed.

INTERNAL ELECTRIFICATION S&F, decorative wall light fixture metalic body single head wall light suitable for 15/20 watt maximum wattage including WW bulb complete all as specified and directed.

S&F, foot light 4 module 5-9 watt with robust designed assembly plates smug fit on the wall dust free glossy finish complete all as specified and directed.

M&L for sheet metal enclosure MCB DBs VTPN, 6 way 415V, with 250Amp rated copper bus bar, double door, IP 43, suitable for 160Amp, MCCB 25 kA as incomer as per IEC 61439-3, suitable for flush mounting complete all as specified and directed.

S&F, MCCB 4 pole, 415V, AC, 'C' curve, adjustable type, 160Amp with breaking capacity 36KA complete all as specified and directed.

M&L for sheet metal enclosure MCB DBs VTPN, 4 way 415V, with 250Amp rated copper bus bar, double door, IP 43, suitable for 160Amp MCCB 25 kA as incomer as per IEC 61439-3, suitable for flush mounting and surface mounting complete all as specified and directed.

S&F, MCCB 4 pole, 415V, AC, 'C' curve, adjustable type, 100Amp with breaking capacity 36KA complete all as specified and directed.

S&F, MCB TPN 415 V, AC, 'C' curve, adjustable type, 63Amp with breaking capacity 36KA complete all as specified and directed.

S&F, polycarbonate based three phase / single phase meter box durable weather resistant enclosure for electric meters secure electrical housing for residential electric meter box complete all as specified and directed.

S&F, TV socket 1 module complete all as specified and directed.

S&F, telephone socket 1 module complete all as specified and directed.

S&F, inner and outer modular cover plate of 1/2 module complete all as specified and directed.

S&F, DWC pipe heavy duty minimum 50mm dia of required length for protection of cables complete including necessary mild steel clamps, nuts, bolts fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F, 60Watts LED new generation energy saving and environmental friendly long life LED building light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having bottom opening separate driver compartment with IP66 protection and impact resistance of IK08 complete all as specified and directed.

EXTERNAL WATER SUPPLY M&L for construction of valve chamber having dimension 900 x 900 x 900mm with PCC 1:4:8 type D2 for foundation, brick work wall in cement mortar 1:4, PCC 1:2:4 type B1 for copping, rendering plaster in CM 1:4, 15mm thick including provision of mild steel steel top cover 3mm thick with brazing of MS flat of size 45 x 4mm at edges and in diagonal and angle iron base frame of 45 x 45 x 5mm, painting with two coats of synthetic enamel paint over a coat of red oxide primer and locking arrangement including necessary excavation earth work complete all as specified and directed.

Supply, install, testing & commissioning, monoblock centrifugal submersible Pump sets 10HP, electric driven with motor and pump including coupling and foundation plate complete assembly suitable for 415V 3 phase 50Hz, PCC foundation complete and head and discharge as per directed by Engineer-in-Charge. (a) 3 core 4 sqmm submersible flat copper cable not less than 10RM with sealant tape. (b) DOL starter ML1.5 - 01 No. (c) Necessary reducer, short piece flanged connections etc.

EXTERNAL ELECTRIFICATION Supplying, installing, testing & commissioning of AC 3 phase 50Hz 200KVA capacity energy efficient level-III transformer step down, plinth mounted outdoor type 22000/433 volts (at NO load), all as per IS-1180 Part-I, copper wound, oil immersed, naturally cooled with external cooling tubes, core type, delta connected on primary (HV) side and star connected on secondary (LV) side in accordance with vector symbol DYN-11 (vector group-4) with neutral brought on secondary (LV) side & having tapping's in equal steps of 2.5% from (+) 5% to (-) 7.5% on primary side by means of hand operated off load tap changing gear, so

as to change / correct LT voltage on secondary side including provision of all necessary / standard fittings, PCC foundation required as per site mainly comprising of: (a) One cable box on primary H.V side having cable glands suitable for 185Sqmm 3 core XLPE 22KV HT cable (consisting of 03 No porcelain HT bushings with brass / gun metal bushing rods complete with nuts and washers).

(b) One cable box on secondary (LV) side consisting of 04 No porcelain bushings with GM bushing rods complete with GM nuts and washers with one No cable gland suitable for reception of outgoing LT PVC sheathed armoured cables of size 300sqmm 3.5 core. (c) Oil conservator with filter type, drain valve and oil level gauge. (d) Dehydrating breather with first fill of dehydrating agent. (e) Explosive vents.

(f) Thermometer pocket on tank cover. (g) One No 100mm dia dial type thermometer vapour pressure type having range 0-120 degree centigrade with temperature reading pointer, maximum temperature indicator and resetting device.

(h) Rating plate with terminal markings. (j) Two earthing terminals on tank / tank cover to facilitate fixing of 32 x 6 mm GI earth strip. (k) Oil level gauge. (l) Oil drain and filter valves. (m) Oil filler hole with cap / plug with connections complete. (n) Lifting lugs. (o) Air relief valve plug. (p) Four plan solid cast steel detachable rollers.

(q) First fill of fresh oil conforming to relevant IS and tested upto 40KV dielectric strength. (r) Extra bushing for neutral outside the LT cable box for providing independent earthing for neutral. (s) Provision of 02 No danger boards 250 x 200mm size made out of 1.6mm thick mild steel plate, vitreous enamelled white with letters, figures of voltage and conventional skull and bones in signal red colour, one at HT side and other on LT side. (t) Any other fittings / accessories so as to conform the whole transformer to IS-1180.

Supply, fix, testing & commissioning of air break gang operated switch, triple pole for transformation installation mechanically operated outdoor type with all fittings / accessories mounted on and including 22 KV HT porcelain insulators and steel channel frame GI operating rod 25mm dia of suitable length with operating mechanism worked from ground level, vertically operated including locking arrangement for operating handle, with and including stainless stell lock with 7 levers complete, suitable for current rating of 400Amp HT 22KV working pressure, commissioning and testing complete all as specified and directed.

S&F, drop out fuse unit expulsion type for outdoor air break gang operated switch, single pole, mounted on and including insulators for 22 KV working pressure, fixed to and including MS channel with nuts, bolts, washers etc., synthetic bounded fuse carrying tube complete withline taps and suitable for current carrying capacity upto 25 Amps only, complete all as specified and directed.

Supply, fixing & connecting HT 22KV outdoor non linear resistor type lightning arrestors with mounting accessories complete fixed on cross arms of 2 pole structure and connected with approximate size of ACSR conductor as over head HT conductor, with 22KV HT empire tape insulation with all fittings, transmission class, including connections to earthing with aluminium strip 32 x 6mm PVC insulated, having discharge capacity of 65KA and suitable for working pressure of HT 11 KV complete all as specified and directed.

Supply, laying, jointing, testing & commissioning cable XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) earthed system 22000 Volts grade with stranded aluminium conductor of size 185 sqmm 3 core complete all as specified and directed.

S&F, 4mm dia GI wire mesh 50 x 50mm, made up into mattresses or cages, lapped, wired and laid in position, including fixing up with suitable nuts, bolts washers etc., and reinforced with suitable MS flat iron complete all as specified and directed. Note: Cost of mild steel flat iron and angle iron supports will be measured and paid separately.

S&F, cable jointing kit 22 KV grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3core XLPE armoured aluminium conductor cable of size 185sqmm complete all as specified and directed.

S&F, cable jointing kit 22 KV grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3core XLPE armoured aluminium conductor cable of size 185sqmm complete all as specified and directed.

S&F, weather proof street light junction box of size 140 x 140 x 95mm depth including MCB SP 6Amp 'C' curve and connecting terminals 4way and fixing with street light poles (steel) using necessary mild steel clamps, nuts, bolts washers of suitable size etc., including fixing arrangement complete all as specified and directed.

Supplying and laying of 80mm bore DWC pipe ISI marked along with all accessories confirming to IS 14930, Part-II complete with fitting and cutting, jointing etc., in trench / open for LT UG cable protection complete all as specified and directed.

Supplying and laying of 50mm bore DWC pipe ISI marked along with all accessories confirming to IS 14930, Part-II complete with fitting and cutting, jointing etc., in trench / open for LT UG cable protection complete all as specified and directed.

Supplying and laying of 25mm bore DWC pipe ISI marked along with all accessories confirming to IS 14930, Part-II complete with fitting and cutting, jointing etc., in trench / open for LT UG cable protection complete all as specified and directed.

M&L for road cutting upto 45cm width and depth 60 to 75cm for laying GI pipe light grade / hume pipe for cable protection including returning filling in and making good the disturbed portion to match with the existing roads by cement / bitumen complete all as specified and directed.

S&F, cable route indicator made out of CI circular disc engraved embossed HT/LT cable, 100mm dia, 10 mm thick fixed on mild steel round bar of 10mm thick 60cm long duly painted with primer and synthetic enamel paint. Indicator shall be embedded in PCC block of size 400 x 400 x 400mm and indicator shall be 20cm above the ground level complete all as specified and directed.

S&F, pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 150mm height, 150mm dia for 11000volts grade complete all as specified and directed.

S&F, aluminium strip insulated 32 x 6mm for lightening arrester connected from top of two pole structure to GI strip earthing lead above ground level complete all as specified and directed.

Supply, fabricate, install, connect, test & commissioning, outdoor type dust and vermin proof LT electrical panel board, 1100 volts, 50Hz AC supply, fully compartmentalised for cable chamber and busbar chambers with adequate space made out of 3mm thick CRCA sheet for load bearing like all over body, front and back cover with hinges and aldrops with DC locks CRCA powder coated and 2mm thick mild steel sheet for non load bearing and portions, complete with one coat of powder coating including suitable angle iron / flat iron frame work / supports bottom 50 x 50 x 6mm mild steel channel as base and chamber for metering equipment complete suitable for

mounting following switch gear items internally connected with suitable capacity aluminium strip / rods insulated and connection wirings with FRLSH copper conductor complete mounted on PCC pillars foundation, arrangements for bus bar trunking system, cable connection using new lugs complete with danger notice all as specified and comprising of the following:- Note: Getting of approval for panel board drawing from Engineer-in-Charge is necessary before fabrication. (a) LED/Neon indicator bulb in RYB Colour - 01 Set. (b) 04 Nos aluminium bus bar 600 Amps with chamber.

(c) Digital multi functional meter for showing Amp (upto 400 Amp) and Voltage (upto 500 voltage) with suitable CT & PT. (d) MCCB 4 Pole, 415 V, 400Amp, 50KA - 01 No. Outgoing: (e) MCCB 4 pole, 415 V, 160Amp, 36KA - 03 No. (f) MCCB 4 pole, 415V, adjustable type, 100Amp with breaking capacity 25KA - 01 No. (g) MCCB 4 pole, 415V, adjustable type, 63Amp with breaking capacity 16KA - 01 No. (h) Suitable cable gland for cable.

Supply, fabricate, install, connect, test & commission, outdoor type dust & vermin proof LT electrical panel board, 1100volts, 50Hz AC supply, fully compartmentalised for cable chamber and busbar chambers with adequate space made out of 3mm thick CRCA sheet for load bearing like all over body, front and back cover with hinges and aldrops with DC locks CRCA powder coated and 2mm thick mild steel sheet for non load bearing and portions, complete with one coat of powder coating including suitable angle iron / flat iron frame work / supports bottom 50 x 50 x 6mm mild steel channel as base and chamber for metering equipment complete suitable for mounting following

switch gear items internally connected with suitable capacity aluminium strip / rods insulated and connection wirings with FRLSH copper conductor complete mounted on PCC pillars foundation, arrangements for bus bar trunking system, cable connection using new lugs complete with danger notice all as specified and comprising of the following:- Note: Getting of approval for panel board drawing from Engineer-in-Charge is necessary before fabrication. (a) LED/Neon indicator bulb in RYB colour - 01 Set. (b) 04 Nos aluminium bus bar 200 Amps with chamber.

(c) Digital multi function meter for showing Amp (upto 100Amp) and Voltage (upto 500 voltage) with suitable CT & PT. (d) MCCB 4 pole, 415V, 100Amp, 36KA - 01 No. Outgoing: (e) MCCB 4 pole, 415V, adjustable type, 63Amp with breaking capacity 16KA - 02 No. (f) MCCB 4 pole, 415V, adjustable type, 40Amp with breaking capacity 16KA - 04 No. (g) Suitable cable gland for cable.

FIRE FIGHTING S&F, hose reel of 20mm dia and 30meter length conforming to IS 5132 complete all as specified and directed.

Supply and installation of 15m long, 63mm dia Reinforced Rubber Lined (RRL) hose conforming to IS 363 Type A with stainless steel instantaneous couplings conforming to IS 903 complete with male and female coupling complete all as specified and directed.

S&F, mild steel flanged pipe 80mm nominal bore heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer complete all as specified and directed.

S&F, mild steel cabinet 750 x 600 x 450mm approximately to enclose fire brigade inlet connections fabricated from 16gauge sheet with full front glass door and locking arrangement painted and mounted on masonry platform complete all as specified and directed.

S&F, addressable manual call point break glass type with alarm LED complete all as specified and directed.

Supply, install, testing & commissioning, monoblock pump set suitable for 415V 3 phase of capacity not less than 10HP and pump head and flow rate as per directed by Engineer-in-Charge, with necessary fixing arrangements including foundation plate and PCC foundation with following accessories complete all as per specification and directed: - (a) 3 core 4sqmm submersible flat copper cable - not less than 10 RM with sealant tape. (b) DOL starter ML1.5 - 01 No. (c) Necessary reducer, short piece flanged connections.

S&F, fire alarm sounders / sirens electronic type horizontal single stage continuous normal operation for at least 50 minutes with sound level 65 DB to 120 DB measured at 1.5 meter with sound output variation of + 5 DB for 500meter range complete all as specified and directed.

DG SET Supplying, installing, testing and commissioning diesel engine driven generating set 415V, 3Phase, 4 wire as per BS 5514/IS-10002 complete with Automatic Mains Failure (AMF) panel of capacity continuous rating 40 KVA conforming to CPCB IV+ norms at NTP conditions with acoustic enclosure considering all derating factors and comprising of the following:-

(a) ALTERNATOR: Closed type regulated with brushless self excitation 415V, 3 Phase, 4 wire, 50 Hz, 0.8PF 1500RPM with voltage variation plus or minus 2.5% of rated voltage from no-load to full-load anti vibration mounted drip proof type with class 'F' insulation, steel ball / roller bearings at both ends of the alternator shaft with necessary controls as recommended by the manufacturer confirming to BS-5000/IS-4772 capable of supplying unbalanced load, alternator make as specified in tender documents.

(b) ENGINE: Multi / cylinder compression ignited, heavy duty, turbocharged, compact diesel engine water cooled through radiator with water pump hydraulic governing mechanism, all as per BS-5514/IS-3046, 1500 RPM class A1 governing / control gauges. RPM/Hours meters suitable for generating application and capable of giving an output of 40KVA for coupled alternator under NTP conditions, complete with following:- (i) Flywheel with housing and mesh protection. (ii) Flexible coupling set directly mounted to engine and alternator with coupling guard. (iii) Air-cleaner dry type with vacuum indicator.

(iv) Fuel pump FIP/CRDI and fuel piping 15mm mild steel pipe with bends, flanges. (v) Fuel filter with water separator and filter element. (vi) Lubricating oil filter with filter element. (vii) DC heavy duty starter 24Volt. (viii) Maintenance free DC batteries 180AH, 24 Volts. (ix) Engine over speed, stop / trip switch. (x) Radiator with fan, thermostat. (xi) Dynamo / Alternator for battery charging. (xii) Corrosion inhibitor coolant. (xiii) Engine control panel electronic digital display type consisting of battery voltage indicator lubricating oil temperature and pressure gauges, coolant water temp gauge RPM indicator cum hour meter.

(xiv) Safety controls for alarm due to high water temperature (HWT) and low lubricating oil pressure (LLOP). (xv) Any other devices / accessories recommended / supplied by the manufacturers as standard equipment. Engine as specified in tender documents.

(c) The engine and alternator will be coupled, aligned and mounted on a specially designed common base frame fabricated from MS channels of suitable cross sectional area and length with bottom drilled holes suitable for and including supplying and fixing anti vibration pads, make Dunlop / Polybond of required size and numbers as recommended by the OEM for mounting of 40 KVA DG set.

(d) Indoor automated mains failure panel fabricated from CRCA sheet, self supporting of appropriate size suitable for unmanned operation of DG set including necessary contactors and bypassing arrangements, manually operated on-load change over 63Amps with all type of indicators and remote controlled operation of DG set and including necessary wiring between DG set and AMF panel inside GI pipe 40mm dia.

(e) Diesel tank of adequate capacity for 24hours continuous run on full load with calibrated scale (fuel level indicator) dip stick, fuel inlet / outlet, air vent drain plug and inlet arrangement for direct filling, including suitable size gate valve in outlet, tank to be fitted at suitable height. (f) Acoustic encloser with canopy cover to be provided as per CPCB norms. (g) PCC/RCC foundation complete as per OEM design.

(h) Documents: Three sets of following documents: -Maintenance and operation manuals for engine and alternator, spare parts catalogue, warranty / test certificates, schematic diagrams of control panels. (j) Miscellaneous items: List of tools and two years normal maintenance spares as per OEM recommended lists, duly prices item wise. (k) On load change over switch 63Amps 415volt, 4 pole - 01 No. Note: (i) Contractor shall satisfactorily conduct load tests of DG set for 12hour including run on 10% overload for 1hour.

Please Enable Macros to View BoQ information

Compatibility Report for BOQ_89100 corrected by me.xls

Run on 5/17/2020 18:00

The following features in this workbook are not supported by earlier versions of Excel. These features may be lost or degraded when opening this workbook in an earlier version of Excel or if you save this workbook in an earlier file format.

Significant loss of functionality

Any effects on this object will be removed. Any text that overflows the boundaries of this graphic will appear clipped.

Excel 97-2003

One or more cells in this workbook contain data validation rules which refer to values on other worksheets. These data validation rules will not be saved.

Excel 97-2003

Minor loss of fidelity

Some formulas in this workbook are linked to other workbooks that are closed. When these formulas are recalculated in earlier versions of Excel without opening the linked workbooks, characters beyond the 255-character limit cannot be returned.

One or more objects in this workbook such as shapes, WordArt, or text boxes may allow text to overflow the object boundaries. Earlier versions of Excel do not recognize this option and will hide overflowing text.

Excel 97-2003