Single core Electron Beam Irradiation cu

Special Eligibility Criteria

1. 1

   Supply as per Tender specification

   Confirmation required
2. 2

   Bidder should be RDSO approved vendor for ID:RDSO Item ID: 3100270.

   Document optionalConfirmation required
3. 3

   The Railway reserves the right to order bulk quantity on the approved sources, and the offers of unapproved sources may be considered only for developmental order of small quantity. The status of approval of tenderer shall be reckoned as on the date of tender opening and not thereafter, unless it is a case of downgrading/removal/suspension/banning. Minimum 80% of Net Procurable quantity shall be ordered on approved vendors. If the tendering firm(s) has been placed as developmental source in vendor directory, then offers from these firms may be considered for developmental order upto maximum of 20% of the Net Procurable Qty

   Document requiredConfirmation required
4. 4

   Where there are not more than three Indian Suppliers categorized as Approved Vendor for a particular item, developmental vendors can be considered for placement of bulk order without any q u a n t i t y restrictions. However, while considering such vendors, factors including past performance, capacity, delivery requirements, quantity under procurement, nature of item, outstanding order load etc. shall be considered in a transparent manner, subject to rates being reasonable. Quantity allocation among eligible vendors shall be based on pre decided splitting criteria. Such orders shall be treated as bulk orders.

   Confirmation required

Commercial-Compliance

1. 1

   i) In case of road delivery, the date of delivery at destination (Consignees end) shall only be treated as delivery date irrespective of F.O.R./F.O.T. condition mentioned elsewhere in the contract/tender. (ii) The bidder confirms that rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance, and such terms quoted anywhere else should be ignored. (iii) (a) Regarding MSE purchase preference firms, please refer clause 15.0 part B of Southern Railway tender conditions available under the link Public Documents->Stores/Supply. (b) Goods and service Tax: Please refer part A Para 14.0 of Southern Railway tender conditions available under the link Public Document -> Stores/Supply. (d) Tenderers are advised to refer instructions to tenders (Part A) and Tender conditions (Part B) for other terms and conditions available under the link Public Document -> Stores/Supply

   Confirmation required
2. 2

   EARNEST MONEY DEPOSIT (EMD) @ 2% of the estimated value of the tender shall be deposited by all vendors for tenders with estimated value above Rs. 25 Lakhs subject to the applicable exemptions. For the exemptions and other details please refer Para 2.0 Part A of Southern Railway Stores Tender Conditions. Bidders who are participating as traders dealers/agents are not exempted from EMD payment irrespective of their MSE Status. Such bidders shall submit the applicable EMD amount

   Document requiredConfirmation required
3. 3

   SECURITY DEPOSIT SECURITY DEPOSIT (SD) shall be 5 % of total value of contract and shall be taken from all vendors for contract value above Rs. 25 Lakh subject to the applicable exemptions. For details please refer 10.0 Part A of Southern Railway Stores Tender Conditions

   Document requiredConfirmation required
4. 4

   Please enter the percentage of local content in the material being offered. Kindly enter 0 (Zero ) for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions. For PUBLIC PROCUREMENT POLICY (Preference to Make in India ), please refer Para 16.0 Part B of Southern Railway Tender Conditions available under the mentioned link. Procurement of the item is restricted to Local suppliers with minimum local content of 20% (Class-I or Class-II Local supplier as defined in Railway Board letter no: No.2020/RS(G)/779/2/Pt.1 dated 25.09.2020) only and the vendors who do not qualify to be "Local suppliers" (i.e., "Non-Local suppliers" with local content less than 20%) should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a "Local supplier" for the tendered item participates in the tender, it does so at it's own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor

   Document requiredConfirmation required
5. 5

   Tenderers shall confirm the following declaration failing which the offer will be ignored. " I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India. I certify that this bidder is not from such a country or, if from such country, has been registered with the Competent Authority. I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. Where applicable, evidence of valid registration by the Competent Authority shall be attached."

   Document requiredConfirmation required
6. 6

   Price of finished cables quoted in this tender are based on the IEEMA Price of copper wire rods (Copper: CU) One month prior to Tender closing date. PRICE VARIATION FORMULA: 1) P = Po + MF (M2-M1) Where Po = Basic price as per Purchase order M2 = Price of copper (IEEMA) one month prior to date of Inspection. M1 = Price of copper (IEEMA) applicable one month prior to the tender closing date. 2) The price to be taken for the purpose of working out the adjustment will be that prevailing on the date 30 days prior to the: - a) Date of which said lot was offered for inspection and as indicated in the inspection note. (OR) b) Date of dispatch from firms works when the materials are to be inspected by the Consignee. The photocopy of circulars of price declaration/notified by IEEMA shall be submitted alongwith the Advance/Final Bill. 3) For every price increase or decrease of Rs.1/- Per Kg in the prices of Copper Wire Rods (Copper:CU) the amount of adjustment in price of 1 Metre cable. NOTE:- i) No adjustment in contract price will be made if the variation up or downin the aforesaid base rae of material is less than Rs. 1/- Per Metre

   Document requiredConfirmation required
7. 7

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

General Instructions

1. 1

   i). Offer validity should be minimum 120 days. ii). Firms with MSME/NSIC Certificate for subject item are requested to submit the same for eligibility towards purchase preference. iii). Tenderer should mention GST No of their firm and also HSN Code

1. 1

   Responsiveness clause:-I/We have carefully gone through the IRS conditions of contract (included and uploaded along with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". I/We hereby certify that no other sister concerns or affiliates (such as having common partner/director/promoter/owner/holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such sister concerns including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest [Para 2502 (e)], anti competitive practices [Para 2502(c)] and obligation to proactive disclosures [Para 2503]. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected, at any stage