Construction of proposed Vertical Extension (Third Floor) of K-7 Commercial Complex at Kalinga Nagar, Bhubaneswar.

Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stony earth, earth mixed with boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge.

Additional cost for Extra lift or 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general.

Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.

Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.

Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge.

R.C.C. work of M-25 for foundation having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.

R.C.C. work of M-25 for plinth beam having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.

R.C.C. work of M-25 for column and beam having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

R.C.C. work of M-25 for lintel having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

R.C.C. work of M-25 for roof slab having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

R.C.C. work of M-25 for staircase having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.

Third Floor

R.C.C. work of M-25 for wall having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

R.C.C. work of M-25 for chajja having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.

Third Floor

Fourth Floor

Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Brick work in superstructure with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Brick work in superstructure with flyash bricks of size 25x12x8cm in cement mortar (1:4) with best quality bricks having crushing strength not less than 75 Kg/cm2 imersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge.

Third Floor

Fourth Floor

Providing full body glazed vitrified tile flooring tile of premium grade 10mm thick conforming to IS 13756 of 600mmx1200mm coloured / printed series (homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.

Third Floor

Supplying, fitting and fixing of full body glazed vitrified tiles in skirting of premium grade 10mm thick conforming to IS 13756 of 600mmx1200mm coloured / printed series (homogeneous) of approved quality, colour of approved quality and size in dadoes in all floors at all heights and riser of steps on 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted Epoxy grout to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge.

Third Floor

Providing 60cmx60cm size special plain/printed series ceramic floor tiles of premium grade of approved make having thickness 7mm to 8mm, conforming to IS 13755 for ceramic tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient, grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as directed by the Engineer-in-charge.

Third Floor

Providing 30cmx60cm size special plain/printed series edge cut ceramic wall tiles of premium grade of approved make having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge.

Third Floor

Providing leather finish granite flooring of approved quality and size in staircase floors, kitchen platform including edge moulding etc in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing lapato finish granite flooring of approved quality and size in steps and landing including edge moulding etc in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all material

Third Floor

s, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.

Ground Floor

First Floor

Second Floor

Third Floor

Providing 20mm thick and above 0.40 Sqm size granite tile cladding of approved quality, colour and size in walls in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the granite including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge.

DOOR PROFILES - SINGLE GLAZED- Providing and fixing Door profile 60x35 having Glass thickness 8mm, toughened Glass Aluminium - material Maximum panel width: 1200mm, Make : Ozone / Dorma • Frame colour: Black Anodized • Single door frame sizes to allow for flush door 35mm • Single glazed systems • Aluminium grade – 6063T6 • Sound insulation capacity of 32 - 34 dB Providing Door Hardware- 'OZ-2BB-FP-SL 5X3X3 BM Two ball bearing flush hinge • Dimension: 5X3X3inch • Ø Barrel diameter: 12mm • Door types: non-rebated security • Loading capacity: 60kg/pair OGH-OFS-11 25X625MM BM Offset Pull Handle OMC-22-K2N-N2 70MM BM Cylinder • Size: - 70mm • One Side Key & Other Side Knob OZML-DL1-30mm BM Narrow Style Mortise Lock NSK-980 E TA BM Rack and Pinion Door Closer with Hold Open Function and Adjustable closing force EN 2-4 OZ-CFB-DP 300 SS Concealed DC-Flush Bolt • Length -300 mm, Bolt.Dia-10mm • Material: - SS 304 • Projection- 25x30 mm

Providing and fixing Anodized System Aluminum three track Sliding glazed windows of TOSTEM / NCL ALLURO / ALUMIL make suitable for 2.4 KPA windload with 50mm visible aluminium section width in the centre interlock. The system offered must be ride-in system with two glass panels moving inside the channel without any external overhung along with a provision for mesh panel on the third track .The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Texguard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. All Slider doors & windows will be centre locking with integrated Anti-lift in slider panel. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 72 mm +/- 3 mm The bottom frame must use a subframe and no direct grouting will be permitted on bottom frame directly . All glasses will be 5-6mm clear toughened. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. 3 track 2 / 4 Glass panel

Providing and fixing Anodized System Aluminum top hung windows of TOSTEM / NCL ALLURO / ALUMIL make using easy clean hinges with fixed part having cut outs on glass for exhaust provision , suitable for 2.4 KPA windload. The extruded aluminium sections should be made from Grade 6063- T5 & Anodized with Texguard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 72 mm +/- 3 mm. All glasses will be 5mm frosted toughened. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa.

Supplying, fitting and fixing of M.S window grills ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge.

Supplying, fitting and fixing of MS openable door with 35 x 35 x 6mm size M.S. angle frame as chowkath and 30x30x5mm Ms frame for shutter with 25x6mm flat fabricated to proper size of door opening with 16 gauge CR sheet including fixing clamps for door frames and hinges for fixing shutters and aldrop with tower bolt etc. complete for all floors including cost, conveyance, taxes of all materials, labour, T&P etc.required for the work etc. complete in all respect as per direction of Engineer-in-charge.

Supplying, Fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification buffing polishing etc with cost conveyance taxes of all materials labour T&P etc required for the complete in all respect.

Supplying fitting and fixing in position 32mm thick flush door with teak wood beading and 1mm thick sunmica to both side pasted with adhessive including fixing of fixtures like Godrej make Mortice lock having model no 4492, Godrej make Door closure having model no 5959, 100mm hinges Godrej model no 4365, stopper including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge.

Providing and fixing in position 28mm thick WPC shutters of approved size to WPC door frames with hinges, handles, tower bolt etc complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge

Third Floor

Fourth Floor

Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished

item of work as directed by the Engineer-in-charge.

Providing and applying 2 coats of 1mm thick elastomeric cementitious waterproofing coating Brushbond RFX of Fosroc Chemicals Tested to ASTM D4060, ASTM D4541, ASTM D638, ASTM C836. with Adhesion to concrete : >1N/mm2 for waterproofing structures like roof slabs, sunken slabs, chajjas, tunnels, water tank etc. after proper surface preparation and soaking the surface with water prior to application complete as specified and directed by the Department at all levels.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 3mm thick aluminium composite panel The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi‐metallic contacts all complete required to perform as per specification and drawing. As specified, as per the approved shop drawings and as directed by the Engineer‐in‐charge.

Providing and fitting TATA circular/square/rectangular Structural steel work welded in built up sections, trusses and framed work including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer and anti corrossive paint 2 coats etc complete as per the approved drawing & design and direction of engineer-in-charge.

Supply & fixing of 12.mm thick Multiwall Clear/Bronze Polycarbonate Sheet of “Polygal / Ultra Lite” make with standing seam on both sides & double tooth snap on locking system, having EPDM/ Rubber Gasket, Dow Corning make weather silicon sealant to make it water proof including all accessories, handling, wastage, transportation, etc. all complete as per the approved Drawing, design and direction of Engineer in charge.

Supplying fitting and fixing in position toilet patrtition & door of 12mm thick of Merino indrustries limited (ZMS Nylon Series) of approved quality and as per drawing & design with all necessary aluminium "u" Channel, "F" Channel, aluminium door stopper channel, aluminium top rail, nylon coat hock, nylon privacy thumb turn, nylon door knob, nylon hinge with cover, nylon adjustable foot, rubber door stopper, ss screw 304 G & P.V.C wall plugs etc including cost of all materials, labour, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge.

Third Floor

Fourth Floor

Providing and fixing Glass Reinforced Concrete (G.R.C) Screens in approved size, pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 – 4 Kg per Sq. Ft. and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’ or equivalent. The material casting should take place in FRP Molds. The fixing of Screens should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and

Third Floor

Fourth Floor

cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge.

Third Floor

Fourth Floor

Finishing inside wall surface with powder wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Finishing outside wall surface with powder wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge.

Third Floor

Fourth Floor

Providing and painting internal surface two coats with plastic emulsion paint over a coat of water based primer of approved quality and approved shade in all floors at all height by making the surface of wall smooth including cost, coveyance, loading and unloading of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.

Painting to external surface of building with two coats of weather coat over a coat of water based primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.

Providing and painting two coats with synthetic enamel paint over a coat of zinc oxide primer of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.

Dismantalling and removal of old RCC from beam, column, roof slab,self, chajja etc including stacking of servicable material and removal of debries to an unobjectionable area within 50 mtr lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge

Dismantling brick or stone masonry in cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead including cost of all material, labour, conveyance, loading and un-loading, royalties, sundries, tools and plants, etc., complete as per the direction of the Engineering-in-charge/Consultant.

Dismantling grading concrete including stacking the useful materials for reuse and removing the debris within 50m lead including cost of all material, labour, conveyance, loading and un-loading, royalties, sundries, tools and plants, etc., complete as per the direction of the Engineering-in-charge/Consultant.

Dismantling and removing sheet roofing including removal of frame, J or L hooks, fastening and stacking the same for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge

Dismantling steel sections, grill etc including stacking the useful materials for reuse and removing the debris within 50m lead including cost of all material, labour, conveyance, loading and un-loading, royalties, sundries, tools and plants, etc., complete as per the direction of the Engineering-in-charge/Consultant.

Providing and fixing rolling shutters of approved make, made of 80x1.25mm laths interlocked together through their entire length and jointed at the by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs grade no 2. and M.S. top cover 1.25mm thick for rolling shutter. Fixing of shutter with lugs of 15x 6mm in 15cmx10cmx10cm cement concrete blocks of 1:2:4 (1cement:2 coarse sand:4 graded stone aggregate) including cost of all materials, labour,T&P etc complete as per direction of Engineer in charge.

Providing and injecting chemical emulsion for pre - constructional antitermite treatment as per IS specification and creating a chemical barrier in bottom and sides of foundation trenches, top-surface of plinth filing junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and cables etc. complete using approved quality of chemical emulsion of requisite quantity prescribed by the manufacturer as directed by the Engineer-in-charge including cost of all materials and labour taxes etc. complete. (Measurement should be taken as per plinth area and indemnity bond for warranty for 10 years to be furnished)

Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge.

Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted European water closet of Hindware make having cat no 20087 or equivalent type of approved make including supply of matching P/S trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge.

Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware counter top wash hand basin of size 49cm dia of Hindware make having cat no 10052 or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge.

Supplying and fixing urinal of hindware make having cat no 60022/60023 or equivalent type of approved make including all fittings like 450mm long connection pipe of Jaquar make having cat no ALD 803B, waste pipe etc of approved make etc complete as per PH specification and direction of the Engineer-in-charge.

Supplying and fixing granite urinal division plate of approved size and 20mm thick including concrete grouting and edge moulding etc complete as per PH specification and direction of the Engineer-in-charge.

Supply all materials, labour,T&P for fitting and fixing of dual flush ceramic cistern of hindware make sleek essence or equivalent type of approved make complete with all parts and internal fitting

s of approved make with ISI mark and supplying of necessary brackets, screws etc 32mm dia flush bend, 15mm dia 450mm long PVC water connecting pipe of jaquar make having cat no ALD 803AB with CP or brass union nuts at each end as per PH specification all complete as per direction of Engineer-in-charge.

Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar Cat. No.-FLR 5053N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized 15mm dia Concealed Stop cock of Jaquar Cat. No.-FLR 5083NK or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized CP Soap case of Jaquar Cat. No.-ACN-1131N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized CP towel ring square of Jaquar Cat. No.-ACN-1121N or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized CP towel rail - 24" of Jaquar Cat. No.-ACN-1111SM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labor T&P for fitting and fixing in all floors' fixed type glass mirror of size 600mm x 450mm best INDIAN make of 4 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized 15mm dia pillar cock of Jaquar Cat. No.-FLR 5015 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-FLR 5041N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD 573 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-ACN-1171N or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized CP toilet paper holder of Jaquar cat. No.-ACN1153S or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Supplying all materials, labour, T&P and fixing standard sized CP robe hook of Jaquar Cat. No.-ACN 1191N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Providing and fixing 6L step can in stainless steel of Kohler make having cat no K-17531T-ST etc complete as per PH specification and direction of the engineer in charge

Providing all materials, labour,T&P and fittings and fixing of urinal valve auto closing system with built in control cock Jaquar Cat. No.-PRS 077 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.

Providing and fixing circular type stainless steel grating with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge

Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe SDR11 confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed)

15 mm dia

20 mm dia

25 mm dia

32 mm dia

Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe S-80 confirming to IS 13592 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance of all materials all complete as per PH specification and direction of Engineer-in-charge.(Non Concealed)

40mm dia

50mm dia

Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge.

75mm dia

110mm dia

Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge.

110mm dia Single Junction with door

110mm dia Double Junction with door

110mm dia Cowl

110mm dia Plain Bend

110mm dia SWR Door Bend

125mm x 110mm Gulley Trap

110mm dia Tee with door

110mm dia Single Junction without door

110mm dia Socket plug

110mm dia Pipe clip

110mm dia Coupler

75mm dia Plain Bend

Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Ball Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge.

25mm Dia

32mm Dia

40mm Dia

50mm Dia

Supplying all materials, labour, T&P and fitting and fixing of UPVC NRV valve of 50mm Dia confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials,

transportation charges from store to site etc all complete as per the direction of Engineer-in-charge.

Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.

Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.

Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 20mm & 10mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge.

Supplying all materials,labour and T&P for constructing Inspection chamber of size 750x750x450mm with R.C.C. top slab in M25 mix with foundation concrete (1:2:4 ) inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, 12mm. thick out side plaster (1:3),brick work with flyash bricks with crushing strength not less than 75kg/sqcm. in cement mortar (1:3) finished smooth complete as per specification and direction of Engineer-n-charge.

Supplying all materials, labour, T&P and fittings and fixing of 2000 ltr Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately)

Providing and fixing in position false ceiling Gypsum board ceiling as per the pattern and design at two levels with tray pattern and cornice to have diffused lighting arrangement made from 12.5mm tk Fire line Gypsum board fixed with main G.I frame channels all along the wall shall be provided. The frame work to be suspended with G.I flats or adjustable M.S rod from intermediate channels using nuts and bolts as recommended using rawls plugs 12.5 mm dia bolts and soft cleat 27mmx 37mmx25mm. Arrangements are to be made to accommodate light fixtures, curtain rails by forming recessed channels which shall be done with jointing compound and paper tape .Ceiling to be leveled and free from cracks . Items to be completed in all respect to the architect's approval .Openings to be made in the ceiling as per architect 's approval to accommodate lighting fixtures. Opening in the ceiling are to be tied with perimeter channel complete with the cost of all labour and material i/c painting with acrylic emulsion painting of two coats with primer coat .

Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with DuneSupreme (Bevelled Tegular) Edge Tiles With Armstrong 15mmExposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , suitable for Green Building application, with Recycled content of 44%. The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68Kgs/M2 & minimum pull out strength of 100 Kgs.. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. The Tile & Grid system used together should carry a 30 year warranty.To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres.

Providing and fixing in position False ceiling Calsium Silicate board and a ceiling as per the pattern and design made from 12mm tk Calsium Silicate board fixed with main G.I frame channels all along the wall shall be provided. The frame work to be suspended with G.I flats or adjustable M.S rod from intermediate channels using nuts and bolts as recommended using rawls plugs 12.5 mm dia bolts and soft cleat 27mmx 37mmx25mm. Arrangements are to be madeto accommodate light fixtures, curtain rails by forming recessed channels which shall be done with jointing compound and paper tape .Ceiling to be levelled and free from c

racks . Items to be completed in all respect to the architect's approval .Openings to be made in the ceiling as per architect 's approval .to accommodate lighting fixtures.Opening in the ceiling are to be tied withperimeter channel complete with the cost of all labour and material i/c painting with acrylic emulsion painting of two coats with primer coat and hardware asper drawing and specification and direction of Engineer-in-charge or consultant.

Providing, fitting & fixing of premoulded decorative corner beading of GRC. Having cross sectional dimension 112x80mm and fixing the same by providing PVC plug, screw, cornice adhesive, fevicol etc complete in all respect as per direction of Engineer-in-charge.

Providing and fixing Jute make Chess pattern Roller blinds with pelmet of Dreamie brand as per the approved shade and design alongwith all the accessories including cost, conveyance, loading, unloading, taxes of all materials, cost of all labour sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge.

Supply Installation Testing Commissioning of Structural steel like threadrod, u clamp, bullet, anchor fastner, angle,channel etc as required to make the system complete.

Providing and putting in position column/ wall paneling as per approved drawing made out of 12mm thick BWR ply over framing with 1mm thick approved colour laminate including cost of all materials, labours, T&P etc required for the work complete in all respect as per the direction of the engineer-in-charge.

Providing partition of full height partly Glazed partition for in other area as per drawing with Aluminium frame 50x25 mm with 1.5mm thickness intermediates, verticals and horizontal (600mmx600mm) as shown in drawing and shall be fixed to floor, ceiling, walls etc. with suitable size of screws, plugs including making good to damages, with the cost of applying a coat of primer to exposed faces of the timber and fixing 6 mm thk .BWR ply both sides of approved make and quality confirming to IS 710 over the frame work with screws at adequate intervals and fixing 1.0 mm thk Laminate both sides on ply (suede finish) with adhesive and 12mm thick glass with 3mm film etching to be fixed with Dorma patch fittings at glazed portion including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. (Payment will be made as per height below the false ceiling)

Providing partition of low height (1200mm) partition as per drawing with Aluminium frame 50x25 mm with 1.5mm thickness intermediates, verticals and horizontal (600mmx600mm) as shown in drawing, and shall be fixed to floor ceiling, walls etc. with suitable size of screws, plugs including making good to all damages, with the cost of applying one coat of primer to exposed faces of the timber and fixing 6mm thk. water proof ply over the frame work on both sides with screws at adequate intervals and fixing 1.0mm thick laminates over it on both sides of approved colour and make to partition ,paneling as per drawing and fixing with suitable adhesive and 12mm thick glass with 3mm film etching to be fixed with Dorma patch fittings, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of EIC.

Supplying fitting and fixing in position wallpaper of dreamz / flow / icon of Marshall or equivalent make as per approved pattern and size to the internal surface of wall or partition including cost, conveyance, loading, unloading, taxes of all materials, cost of all labour sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge.

Costomise wall paper

Printed wall paper

Primery point

Secondary point

Call bell point

Wall bracket fan point specification same as above.

Exhaust fan point specification same as above.

Ceiling fan point consisting of modular regulator of Legrand make model name Myrius or equivalent on existing switch board

Supply and fixing of 6Amp plug with 6amp switch on existing board (Modular type ISI marked)

Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch, phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. (convinient power)

Supply and fixing of ISI marked modular type 2nos 6Amp plug with switch on suitable size of metal box and modular cover in front on surface or recess including all conection.

Supply and fixing of ISI marked modular type 1nos 6Amp plug with switch and 1nos 16Amp plug with switch on suitable size of metal box and modular cover in front on surface or recess including all conection.

Supply and fixing of modular metal box on surface or recess with suitable size of modular cover in front including providing an fixing of ISI marked 16Amp plug with switch with all conection.

Supply& fixing of Modular type 25 Amp one way switch and socket outlet for AC point with metal box and modular cover.

Recessed/surface extra lead submain wiring alongwith earth wire with the folowing size of PVC insulated single core multistrand coper conductor of ISI marked conforming to IS 694/1990 in 20mm dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required exceeding to Long point in 2x1.5sqmm + 1x1.5sqmm.

2 x 2.5 sq.mm. + 1 x 1.5 sq.mm.

2 x 4.0 sq.mm. + 1 x 1.5 sq.mm.

2 x 6.0 sq.mm. + 1 x 2.5 sq.mm.

Supply Installation Testing Commissioning of Microprocessor based Conventional 4 Zone fire alarm contorl panel with 2 nos of battery complete set. (Agni/System Sensor)

Supply Installation Testing Commissioning of Conventional Smoke detector With mounting Base and all accessories. (Agni/System Sensor)

Supply Installation Testing Commissioning of Conventional Hooter With mounting Base and all accessories. (Agni/System Sensor)

Supply Installation Testing Commissioning of Conventional Manual Call Point With mounting Base and all accessories. (Agni/System Sensor)

2 x 10.0 sq.mm. + 1 x 4.0 sq.mm.

Supply Installation Testing Commissioning of 2 X 1.5 Sqmm Copper flexible cable with 20 mm pvc conduit, C clamp,bend, tee etc to make the system complete. (Polycab/ Havells)

SITC of ISI marked (IS:2878) Fire Extinguisher , Carbon-di-oxide type capacity 4.5 Kg. with all accessories. (Fireshield/Armour)

SITC of ISI marked (IS:2878) Fire Extinguisher, ABC type capacity 6 Kg. with all accessories. (Fireshield/Armour)

4 x 2.5 sq.mm. + 2 x 2.5 sq.mm.

4 x 4.0 sq.mm. + 2 x 2.5 sq.mm.

4 x 6.0 sq.mm. + 2 x 2.5 sq.mm.

Wiring- Wiring to light points/fan point/exhaust fan point/Call bell point with 1.5-sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non metalic PVC flexible condute with 6Amp, 250V Modular Switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.

4 x 2.5 sq.mm. + 2 x 2.5 sq.mm.

4 x 4.0 sq.mm. + 2 x 2.5 sq.mm.

4 x 6.0 sq.mm. + 2 x 2.5 sq.mm.

Submains- Recessed/surface submain wiring alongwith earth wire with the following size of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in required dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required.

4 x 10.0 sq.mm. + 2 x 4.0 sq.mm.

4 x 16.0 sq.mm. + 2 x 10.0 sq.mm.

Supply, delivery, installation, testing & commissioning of L.T. indoor floor/ wall mounted type distribution boards made out of reputed company IP 43 - #IK 09 with metal door having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge.

3&1/2 core x 185 sqmm A2XFY

3&1/2 core x 150 sqmm A2XFY

CONTROL PANELS : Supply, delivery, installation, testing & commissioning of L.T. Indoor floor / wall mounted type Distribution Board made out of 2 mm thick CR sheet metal cubicle with front side hinges glass door for every meter compartment, the cabinet have a common bus bar, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp & vermin proof powder coated; having hinged door and compartmental arrangement for each equipment & busbar chamber on the top of the panel; having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-Charge. All MCCB shall confirm to IEC- 60947 and IS-13947. MCCB shall comply with the isolation function requirement of IEC-60947-2 section 7.1.2 to be marked as suitable for isolation / disconnection to facilitate safety of person in use. All MCCB have Ics=100% Icu and the overload setting should be from 0.7 to 1 times of Ir for thermal magnetic release and for microprocessor release the overload Settings: 0.4 to 1 times of Ir. Manually closing mechanism should be accommodated in a Moulded housing of robust and vermin-proof construction. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open) . The tripping devices shall be ambient temperature compensated type. The insulating case shall be made of high strength heat resistant and flame retardant thermosetting insulating material.

4 core x 16 sqmm A2XWY

Earthing with G.I. Earth Plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required and as per the direction of Engineer in charge.

Providing and fixing of 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing of 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 4.00 mm dia hard drawn bare copper wire on surface or in recess for loop earthing as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

22 watt LED extruded aluminium batten for continuous operation and available in 4ft run length, suitable for surface, wall & conduit mounting (with accessories) similar to make ‘Signify’ Cat no. BN021C LED22S complete.

12 watt LED extruded aluminium batten available in 2ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting (with accessories) similar to make ‘Signify’ Cat no. BN 021 LED12S 6500 compl

Inverter type 9 watt LED Bulb on existing holder of approved make

12 watt LED slim profile surface mounted downlight similar to make ‘Signify’ Cat no. SM250/260 LED12S complete.

6 watt pressure die cast housing LED bulkhead with IP66 protection and IK09 impact resistance suitable for surface and wall mounting applications similar to make Signify Cat no. WT202W LED6S complete.

36 watt SmartGlow is an intelligent office lighting recessed luminaire with built in PIR occupancy sensor offering flexibility of auto switching off when the space is not occupied similar to make Signify Cat no.RC383B P LED 36S complete.

6 watt Ultra sleek recessed downlight for low height false ceiling in square profile similar to make Signify Cat no. DN495 LED6S complete.

MAIN PANELS : Incoming: MCCB: 1 No 400A (36kA) 4P thermal magnetic(TM) release with ROM & spreader links. SPD: 1No 50kA 4P T1+T2. MCB 'C': 1 No 63A 10kA 4P. CHANGE OVER SWITCH: 1 no

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, Ceiling Fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. Canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required similar to make Crompton Cat no. Energion HS - 5 Star BEE complete.

Supply, delivery, installation, testing & commissioning of single phase 400mm sweep wall mount fan similar to make Crompton Cat no. WM Hiflo Wave Plus complete.

Supply, installation, testing & commissioning of metal Exhaust Fan 300mm sweep similar to make ‘Crompton’ cat no Trans Air 12" complete.

Cable Laying: Supply, laying & testing of following size of PVC insulated, PVC sheathed, round armoured aluminium conductor power cable of 1100 volt grade laid on surface of wall / column / existing RCC / stone ware / masonry cable trench / cable trey / through G.I. pipe / hume pipe as the case may be, including cost of saddles / clamps / markers etc but excluding the cost of G. I. pipe / hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge.

Supply, delivery, installation, testing & commissioning of plastic Ventilation fan 150mm sweep similar to make Crompton cat no Brisk Air Neo 6" complete.

400A 4P On Load Change Over Switch. Outgoing : Busbar: 2 SET, 4Nos 500 Amp Copper Strips. (CD=1.6A/sqmm). MCCB: 3 No 250A (36kA) 4P thermal magnetic(TM) with ROM & spreader links for 3rd Floor DB, AC DB & Spare. MCCB: 2 No 100A (25kA) 4P thermal magnetic(TM) with ROM & spreader links for Solar & Spare. Instruments: 1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CT's.

Supplying and fixing Call bell suitable for single phase, 230 volts, complete as required. as per the direction of Engineer-in-charge

Supply and fixing circular / hexagonal G.I. box for ceiling fan hook, of internal dia 140 mm, 75 mm height, top lid of 1.5 mm thick G.I. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the G.I. box by means of 3.3 mm dia round headed screws, one lock at the corners. Hook shall be made of 10 mm dia galvanised M.S. bar bent to shape as per standard drawing.

OUTDOOR KIT

1.0 TR ( Compact Cassette )

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, Ceiling Fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. Canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required similar to make Crompton Cat no. Energion HS - 5 Star BEE complete.

Supply, delivery, installation, testing & commissioning of single phase 400mm sweep wall mount fan similar to make Crompton Cat no. WM Hiflo Wave Plus complete.

Supply, installation, testing & commissioning of metal Exhaust Fan 300mm sweep similar to make ‘Crompton’ cat no Trans Air 12" complete.

Supplying and fixing Call bell suitable for single phase, 230 volts, complete as required. as per the direction of Engineer-in-charge

Supply and fixing circular / hexagonal G.I. box for ceiling fan hook, of internal dia 140 mm, 75 mm height, top lid of 1.5 mm thick G.I. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the G.I. box by means of 3.3 mm dia round headed screws, one lock at the corners. Hook shall be made of 10 mm dia galvanised M.S. bar bent to shape as per standard drawing.

3RD FLOOR DB. Incoming: MCCB: 1 No 250A (25kA) 4P thermal magnetic(TM) release with ROM & spreader links. CHANGE OVER SWITCH: 1 no 250A 4P On Load Change Over Switch.Outgoing: Busbar: 1 SET, 4Nos 320 Amp Copper Strips. (CD=1.6A/sqmm). MCCB: 2 No 160A (25kA) 4P thermal magnetic(TM) with ROM & spreader links for Fire fighting DB & Spare. MCCB: 3 No 63A (25kA) 4P thermal magnetic(TM) with ROM & spreader links for Lift DB & Spare. MCB 'C' 10 Nos 32A 10kA 4P for TPN BDB (Light/ Computer) & Spare. MCB 'C' 5 Nos 40A 10kA 4P for TPN BDB (Power) & Spare. MCB 'C' 4 Nos 63A 10kA 2P for Power Cercuit. Instruments: 1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CT's.

REFNUT/Y-JOINT

Supply, Installation, testing and comissioning of copper Y-joints

WIRELESS REMOTE CONTROLLER

Supply, Installation, testing and comissioning of wireless remote controller for Cassette AC

Cassette Pannel

INSTALLATION OF VRF OUTDOOR UNIT

LIFT Distribution Board. Incoming : 1 No 63A (16kA) 4P thermal magnetic release MCCB with ROM & Spreader links. Busbar : 1 SET, 4Nos 80 Amp, 500V Electrolytic Copper Strips. (CD=1.6A/sqmm). Outgoing : 2 Nos 40A 4P RCCB (300mA) for Lift motor & spare. 2 Nos 25A 2P RCCB (30mA) for lift car control panel & spare. 3 Nos 6A/10A SP MCB 'C' (10kA) for lift car light & spare. Complete duly factory wired as per SLD. Instruments: 1 Set of LED type RYB phase indicating lamps with control fuses & 1no Multi Function meter with required CT's

8way SPN BDB. Incoming : 1 no of MCB 'C' 32A (10kA) 2P. Outgoing: 6 nos of 6-32A SP MCB 'C'.

4way TPN BDB for Light/ Computer. Incoming : 1 no of 32A 4P MCB 'C'. Outgoing: 12 nos of 6-32A SP MCB 'C'.

4way TPN BDB for Raw Power. Incoming : 1 no of 63A 4P MCI. Outgoing : 12 nos of 6-32A SP MCB.

Cable Laying. Supply, laying & testing of following size of PVC insulated, PVC sheathed, round armoured aluminium conductor power cable of 1100 volt grade laid on surface of wall / column / existing RCC / stone ware / masonry cable trench / cable trey / through G.I. pipe / hume pipe as the case may be, including cost of saddles / clamps / markers etc but excluding the cost of G. I. pipe / hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge.

Cable termination: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required complete as per the direction of Engineer-in-charge.

INSTALLATION OF VRF INDOOR UNIT

34.9 mm O.D (wall Thickness-1.2 mm) (Insulation: 19 mm)

Earthing. Earthing with Copper Earth Plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required as per the direction of Engineer-in-charge.

28.6 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm)

22.2 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm)

19.1 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm)

15.9 mm O.D (wall Thickness-1.0 mm) (insulation : 19 mm)

12.7 mm O.D (wall Thickness-0.8 mm) (insulation : 13 mm)

32mm dia

40 mm dia

300 mm width x 50 mm depth x 1.6 mm thickness

450 mm width x 50 mm depth x 1.6 mm thickness

Fittings & Fixtures: Supply,installation, testing & commissioning of following types of light fixtures directly on wall / ceiling of building with all accessories such as drivers, lamps cover etc complete assembly including supply of all accessories and making connection from the suitable point outlet complete as per the direction of Engineer-in-charge.

VARIABLE REFRIGERANT FLOW/VOLUME SYSTEM. Air Cooled Type Variable Refrigerant Flow System based on 100% Inverter Scroll Compressor with linear capacity control, IPM Technology, VET Technology, PWM overmodulation control, unique HIC circuit, self diagnostic auto check, auto restart, built in Auto Phase Reversal & Auto Bye Pass functions, Inverter start technology complete with R410A refrigerant based Outdoor & Indoor units, wired / wireless / central remote controllers, refrigerant connectors & joints, copper refrigerant piping, control & transmission wiring, condensate drain piping and other accessories as required and detailed in the specification. VRF OUTDOOR UNITS : Modular type low noise outdoor condensing units, comprising of own made Low Pressure Shell type Inverter based Multi Valve Scroll Compressor housed in a separate fire protected enclosure, 6 Pole Motor, Induction type Heater, Suction Gas Cooled Compressor Motor, Accumulator, Blue fin treated condenser coil for corrosion resistant, BLDC condenser fan motor, high ESP and low noise aerodynamic condenser fan, MAKE- MITSUBISHI ELECTRIC,HITACHI, BLUESTAR, CARRIER, TRANE

INDOOR UNIT. Supply,installation,testing and commissioning of 4-way VRF Cassette Type Indoor ceiling mounted unit equipped with cordless remote , synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, drain pan, drain pump, cassette grill, insulation, necessary supports, vibration isolation etc, suitable for operation on 230 V ± 10%, 50 Hz single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire. All indoor Units should have force shut option to connect with fire alarm adaptor, so that the unit automatically stops in case or fire. The cooling capacity of indoor unit will be at air inlet conditions of 27 degree C DBT and 19 degree C WBT.

REFRIGERANT PIPING. Supply, Installation, testing and comissioning of Interconnecting refrigerant copper pipe work with closed cell nitrile rubber tubular insulation class "O" type between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported with MS hanger/tie rod/ gripple support.Refer tender specification for detail description.

Liquid Line: 19.1 mm O.D (wall Thickness-1.0 mm) (insulation : 13 mm)

Liquid Line: 15.9 mm O.D (wall Thickness-1.0 mm) (insulation : 13 mm)

TRANSMISSION & CONTROL WIRING

Liquid Line: 12.7 mm O.D (wall Thickness-0.8 mm) (insulation : 13 mm)

Liquid Line: 9.5 mm O.D (wall Thickness-0.8 mm) (insulation : 13 mm)

Liquid Line: 6.4 mm O.D (wall Thickness-0.8 mm) (insulation : 13 mm)

CONDENSATE DRAIN PIPING. Supply, installation, testing and commissioning of Rigid heavy class PVC piping with minimum 6 mm nitrile rubber insulation over the pipes ,complete with fittings, supports,U trap arrangement ,clean plug and accessories for units as per specifications and technical specification.

Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch, phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. (convinient power)

Supply and fixing of ISI marked modular type 2nos 6Amp plug with switch on suitable size of metal box and modular cover in front on surface or recess including all conection.

Supply and fixing of ISI marked modular type 1nos 6Amp plug with switch and 1nos 16Amp plug with switch on suitable size of metal box and modular cover in front on surface or recess including all conection.

Supply& fixing of Modular type 25 Amp one way switch and socket outlet for AC point with metal box and modular cover.

Recessed/surface extra lead submain wiring alongwith earth wire with the folowing size of PVC insulated single core multistrand coper conductor of ISI marked conforming to IS 694/1990 in 20mm dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required exceeding to Long point in 2x1.5sqmm + 1x1.5sqmm.

2 x 2.5 sq.mm. + 1 x 1.5 sq.mm.

2 x 4.0 sq.mm. + 1 x 1.5 sq.mm.

CABLE TRAY FOR REFRIGERANT PIPING. Supply,Installation, testing and commissioning of following size of perforated hot dip galvanized G.I cable tray with perforations not more than 17.5%, in convenient sections, joined with connectors, suspended from ceiling with G.I suspenders including bolts and nuts, etc. for carrying refrigerant pipe in outdoor application as required.

4 x 2.5 sq.mm. + 2 x 2.5 sq.mm.

Supply, Installation, testing and fixing of control cum transmission wiring in 25 mm dia PVC Conduit between indoor and outdoor units.(1.5 Sqmm X 2 Core - Copper)

4 x 6.0 sq.mm. + 2 x 2.5 sq.mm.

MS FRAME FOR OUTDOOR UNIT

Supply, delivery, installtion, testing and commissioning of indoor floor mounted type distribution boards for common area made out of high quality polycarbonate (shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant, having high impact, made of halogen and silica free recyclable material), UV resistant, having high grade gasket made of polyurethane, should withstand glow wire test at 9600C, should be flame retardant, the cabinate should have test certificate in accordance with IEC 60 439-1 (IS8623), IEC 60 439-2, CPRI (ASTA) (Party should submit copy of all test certificates during offer submitting) The panel should have hinged door with provision for cable entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete including necessary civil / fabrication work as required as per the direction of Engineer-in-charge. All MCCB shall confirm to IEC- 60947 and IS-13947. MCCB shall comply with the isolation function requirement of IEC-60947-2 section 7.1.2 to be marked as

Supply and Erection of MS base frame duly applied with red-oxide primer & followed by black enamel paint for mounting of outdoor units.

Supply, Installation, testing and fixing of control cum transmission wiring in 25 mm dia PVC Conduit between indoor and outdoor units.(1.5 Sqmm X 2 Core - Copper)

4 x 6.0 sq.mm. + 2 x 2.5 sq.mm.

MS FRAME FOR OUTDOOR UNIT

suitable for isolation / disconnection to facilitate safety of person in use. All MCCB have ics=100% icu and the overload setting should be from 0.7 to 1 times of Ir for thermal magenetic release and for microprocessor release the overload Settings: 0.4 to 1 times of Ir. Manually closing mechanism should be accommodated in a Moulded housing of robust and vermin-proof construction. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open) . The tripping devices shall be ambient temperature compensated type. The insulating case shall be made of high strength heat resistant and flame retardant thermosetting insulating material.

Supply, delivery, installation, testing & commissioning of L.T. indoor floor/ wall mounted type distribution boards made out of reputed company IP 43 - #IK 09 with metal door having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge.

3&1/2 core x 150 sqmm A2XFY

Main Distribution Board. Incoming: MCCB: 1 No 250A (25kA) 4P thermal magnetic(TM) with ROM & spreader links. Outgoing: Busbar : 1 SET, 4Nos 320 Amp Copper Strips. (CD=1.6A/sqmm). 3 nos 80A 16kA 4P MCCB with ROM spreader links for 22 HP ckt & Spare. 3 nos 63A 16kA 4P MCCB with ROM spreader links for 18 HP out door unit, Indoor DB & Spare. 1 nos 40A 16kA 4P MCCB with ROM spreader links for 10 HP out door unit. Instruments: 1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CT's.

10-Channel Mixing Console,Max. 4 Mic / 10 Line Inputs (4 mono + 3 stereo),1 Stereo Bus,1 AUX (incl. FX),“D-PRE” mic preamps with an inverted Darlington circuit,1-Knob compressors,High-grade effects: SPX with 24 programs,24-bit / 192kHz 2in / 2out USB Audio functions

4 core x 10 sqmm A2XWY

All-in-one camera, microphone, and speaker system,Newly developed SoundCap Eye™,4K Camera with Smart Framing,One-USB connection to start the collaboration,Engineered Adaptive echo canceller and Noise reduction,Hexa-microphone Beamforming,90 dBSPL (1 m) Embedded Speaker

65" 4K UHD(3840 X 2160) resolution Android LED display with built in 2.4 Ghz Wifi, 1.1 Ghz Built in Quad core processor, 2 GB DDR3 RAM, 16 GB Memory, built in,Double Core Mali 600 MHz GPU,with HDR 10, Dolby Audio, Built in Wifi and Cromecast, HDMI CEC, HDMI ARC, Built-in BluetoothVer.4, 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB X 2, RJ45 X 1, Headphone Out x 1, SPDIF,Out x 1,

3&1/2 core x185 sqmm A2XFY

Supply of HDMI , USB & Cat6 Cable for Connectivity

Supply of 2 Core 1.5 Sq.MM Flexible Speaker Cable as per site with 25 mm PVC pipe

12U Equipment rack

Installation , testing & Commissioning of the system

Supply and installation of IP Based PoE Phone, 2 SIP accounts, 2 line keys, 3-way conferencing, 3 XML programmable context-sensitive soft keys, Dual-switched 10/100 mbps ports, integrated PoE, HD audio on speakerphone and handset. Make: Grandstream, NEC, Mitel

SITC of Cat6A I/O with Dual Face plate: Cat6A Tool less Information outlet for Data & Voice. Cat6 U/UTP RJ45 socket with built in crimping mechanism with capability of retermination without refreshing the wires. Toolless RJ45 Information outlet with insertion cycle (in & out) upto 2500 times (I/O) along with front side Label holder and transparent shutter. The Information Outlet connector shall be of gold/nickel, thickness of gold > 0.8 μm. The connectors shall be compatible as per IEEE 802.3bt standard for POE++ application. The PVC material of Face plate should complie ABS /UL94-V-O certified. Make: Systimax, Legrand, Panduit.

DBl for 2 nos outdoor cercuit upto 22HP. Incoming : MCCB: 1 No 80A (16kA) 4P thermal magnetic(TM) with ROM & spreader links. Outgoing: 3 nos 40A/63A 10kA 4P MCB 'C' for Outdoor Unit & Spare. 1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CT's

2x 300W at 8Ω,2x 500W at 4Ω,Class-D amplifier engine with a custom LSI,Flexible onboard PEQ, crossover, filters, delay, and limiter functions

SITC of 24 port Cat 6A 19" Modular Toolless Patch Panel (loaded) enable all possible combinations of the various types of cable (UTP, FTP, SFTP) mounted on the same panel by using various toolless connector blocks/modules. Have a metal structure enabling them to be durably fixed to the uprights of the 19” chassis and assuring automatic grounding between toolless RJ-45 connectors, the panel, and the 19” uprights of the enclosure. Include rear cable support with plastic cable guides to hold cable without need for cable ties. Include quick mounting system to mount the panel into the 19” rails without use of cage-nuts. These may be used to secure the connections of wifi access points, IP cameras, servers, or other critical devices. Front Removal IO's option for maintenance and trouble shooting with 6 Different Colours Labels for Labelling & Identification of Individual Ports. Tested and guaranteed under dual circuit IEEE PoE++ more than 90W for up to 2500 on-load connections / disconnections. Make: Systimax, Legrand, Panduit.

DB for 18HP Out door unit. incoming/ outgoing : MCB 'C': 1 No 63A (10kA) 4P.

SITC of CAT6A UTP 26 AWG Patch cord with cross separator , Manufactured from stranded wires for longer flex-life , Minimum length of 1m, and maximum length of 5m Conforming to the following standards like Smoke density: Series IEC 61034 / IEC 61034-2, EN 61034-2, IEC 60754/IEC 60754-2, EN 60754-2, IEC 60332-1/60332-1-2, UL VW-1 with tensile strength >50N, Number of Insertion upt

o 2500 Duty Cycle. Make: Systimax, Legrand, Panduit

SITC of 24 Port Layer 2 PoE+ Switch having 24 x 10/100/1000 Mbps Ethernet PoE+ ports with 4 x 1/10Gig SFP+ ports ,1 x RJ45 port console port ,Switching Capacity 128 Gbps , Throughput 96 Mpps ,MAC Address 16k , Switch should support IEEE 802.3af (15.4W) & IEEE 802.3at (30W). Total PoE power: 370W or above , Switch should support DHCP server/relay/client, DHCP snooping/option82 , Switch should support Console, Telnet, SSH v1/2, HTTP, HTTPS, SNMP v1/v2/v3, RMON , TFTP, FTP, SFTP, NTP, ZTP, SPAN, RSPAN,Switch should support support ICMPv6, DHCPv6, ACLv6 ,IPV6 Telnet ,Temperature 0°C -50°C ,Power Supply AC: 100-240V. Make: Digisol, Cisco, HP

SITC of 19" Rack mountable cloud managed Internet Gateway having user configurable LAN/WAN ports 8 x 10/100/1000 Mbps BaseT Ports with 2 x 1Gbps SFP Ports supporting minimum 9 WAN Ethernet Interface. The Gateway should minimum support simultaneously internet user of 1000 clients. Should minimum support 2.5 Gbps Internet Bandwidth. The Gateway should support L3 Routing features like Static, RIPng, OSPFv3. Gateway Level customised Web/URL filtering with L7 Deep Packet Inspection and real time application and user level access control involving access, denial, monitoring, logging and reporting at gateway level. Make-Ruijie, Cisco, Digisol

SITC of Dual band 802.11ax 4X4:4 WiFi6 Dual Band Access Point. Complying PoE+ for power, 6 Gbps aggregate wireless throughput, 2.5 Gbps RJ45, and 2.5 Gbps SFP wireline ports with inbuilt on premise virtual controller as well cloud based controlling and administration of WiFi systems. Make: Grandstream, Ruije, Cisco

DB for 10HP Out door unit. incoming/ outgoing : MCB 'C': 1 No 40A (10kA) 4P

SITC of Cat6A I/O with Single Face plate: Cat6A Tool less Information outlet for Data & Voice. Cat6 U/UTP RJ45 socket with built in crimping mechanism with capability of retermination without refreshing the wires. Toolless RJ45 Information outlet with insertion cycle (in & out) upto 2500 times (I/O) along with front side Label holder and transparent shutter. The Information Outlet connector shall be of gold/nickel, thickness of gold > 0.8 μm. The connectors shall be compatible as per IEEE 802.3bt standard for POE++ application. The PVC material of Face plate should complie ABS /UL94-V-O certified. Make: Systimax, Legrand, Panduit

1mtr Length

2mtr Length

Remote Conference Dante Processor, Ether1- Dante Audio/Dante Control, Remote Control, WebUI, PoE+,Ether2/Ether3 Corporate Network, Remote Control, SIP, Web UI,USB USB2.0, Network Class, Web UI, Fixed IP,Audio I/O Dante 16in/16out,USB USB2.0, Audio Class 1.0, Input: 2 ch, Output: 2 ch @48 kHz,Mic Input XLR balanced, Input 2 ch,AUX RCA unbalanced (Line Level), Input: 2 ch, Output: 2 ch,Speaker Out RCA unbalanced (Line Level), Output: 2 ch,Bluetooth Version Bluetooth 4.2,Supported Profiles HFP (1.6), A2DP, AVRCP,Supported Codec CVSD, SBC, mSBC,Wireless Output Class2,Maximum Communication Distance 10 m (32.8 ft) Radio Frequency (Operational Frequency) 2,402 to 2,480 MHz,Maximum Output Power (EIRP) 4.0 dBm (2.5 mW),SIP Call Handling Dial, Answer, Hold, Resume,,Forwarding, Do not disturb, Call ID, Voice Mail Notifications ,Call Bridging Supports Bridging SIP, USB, BT and AUX Calls. Join, Split, Hold, Resume, 5+1 Lines: Up to 2 SIP calls, 1 U

SB call, 1 Bluetooth Call, 1 AUX, plus the user,Codecs G.711, G.722HD, G.729ab, G.726,DTMF Support RTP event, SIP in-band, SIP info package Security SRTP Support (RFC 1889), IETF SIP support(RFC 3261 and companion RFCs),Sampling Rate 48 kHz,Bit Depth 24 bit,Latency 8 [ms] (Dante In to USB Out, includes signal processing),Frequency Response 20 Hz – 20 kHz

LAN ports equipped with PoE supply: 8(1-8),LAN/SFP combo ports: 2(9, 10) (The LAN port and SFP slot are exclusively used),PoE supply is compliant with IEEE 802.3at, and can supply up to 30W to all PoE ports,In-build RADIUS server for advanced security management

3.5” full-range speaker unit,Low-profile design facilitates installation in limited ceiling spaces,Direct support for low-impedance or high-impedance connections,Built-in carrying band increases safety during installation,Anti-drop tab mechanism provide secure temporary positioning during installation,Double-threaded speaker clamp screws for speedy tightening, Transformer Taps -100V , 15 W, 7.5 W, 3.8 W, 1.9 W,70V 15 W, 7.5 W, 3.8 W, 1.9 W ,SPL Sensitivity (1W; 1m on axis) 87 dB SPL (Half-space:2π) ,Peak (Calculated) - 106 dB SPL (Calculated, 1m) ,I/O connectors Euroblock (4 pin) × 1 (input: +/-, loop-thru: +/-)

Branch Distribution Board ( 4 way TPN DB). Incoming: 1 no of 16A 4P MCB 'C'. Outgoing: 12 nos of 6-10A SP MCB as per SLD.

Branch Distribution Board (8way SPN DB). Iincoming: 1 no of 32A 2P MCB 'C'. Outgoing : 6 nos of 6-10A SP MCB as per SLD

SITC of 10KVA Parallel UPS system with IGBT based inverter system, true online double conversion system, inbuilt isolation transformer & automatic phase sequence corrector of 3ph in put to 3 ph output,415V, with built in BMS with battery back up up to 30 minutes with MS Rack for battery Housing, DC cable 7 Mtr with SFU and links for installation (Battery required: 12V, 100AH, 34 Nos) protection for fault by OL,UV,EF,GF,OC,Ph. LOAD OF OT,ICU). Make: APC, Vertive, Delta

Branch Distribution Board (4way SPN DB). Incoming: 1 no of 16A 2P MCB 'C'. Outgoing : 2 nos of 6-10A SP MCB as per SLD

Supply and installation of IP Based PoE Phone having 4.3" TFT Colour Display, 4 SIP accounts, 10 line keys, 3-way conferencing, 5 XML programmable context-sensitive soft keys, Dual-switched 10/100/1000 mbps ports, integrated PoE,WiFi(Dual Band 801.11AC) HD audio on speakerphone and handset. Make: Grandstream, NEC, Mitel

Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-Light IR Fixed Lens Bullet Camera, 1/2.8" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, triple stream at various resolution & Frame Rates, Min. Illumination required 0.007 lux (color), 0 Lux IR On, 2 IR LEDs, Smart IR with upto 50m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265, H.264 & MJPEG , Fixed Lens 2.8mm, Field of View FoV H:90°, V:62°, BLC, HLC, WDR, 3DNR, White Balance - Auto/Manual, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 4 Privacy Mask, 8 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 2-Way Audio Full Duplex Line IN/Out, 256GB SD card support, Alarm: 1In/1out, PoE (802.3 af) and 12V DC, Max 5W, IP 66/67 & IK10 with Die Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T compliant, UL/CSA 62368-1, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS (EN63000)/NDA compliant. Make-Honeywell(Series 35), Pelco, Axis

Supply and Installation of 32Ch 4K Network Video Recorder 8 sata , Up to 12 Megapixels resolution recording,Remonte Connection 128, SSynchronous Playback16CH, RAID0, RAID1, RAID5, RAID10. Supported, RS-232, RS-485, Keyboard, Front panel: 2 × USB 2.0, Rear panel: 1 × USB 3.0,ALARM IN/OUT-16/4, Incoming bandwidth-320Mbps or 200Mbps (when RAID is enabled),2HDMI/2VGA. Make- Honeywell (Series 35), Axis, Bosch

SITC of Surveliance 10 TB HDD. Make:- WD, Segate, Equipvalent

SITC of 55" UHD IPS Commercial Digital Display for Small Size Discussion & Chambers: Brightness (440 nits or higher), Dynamic Contrast Ratio (Dynamic MCI (Hz)):1000000:1), 1000000:1, Static (Panel) Contrast Ratio-1200:1, Response Time (G to G)-8 ms, Refresh Rate.-60 Hz, Life span (hrs)-30,000, Speaker (Sound Output):10W + 10W, Speaker System: 2.0 ch, DVB-T2/C Broadcasting System, Commercial Smart UX, webOS version (webOS 6.0), BIS Certification with 3 years onsite warrenty. Make: Samsung, Panasonic, LG

Intallation & commissioning with civil foundation for 100 kVA DG Set, 4 nos earthing, unloading & shifting, statutary (Electrical) approval, standard testing, silencer extension as per PCB rule.

Supply, installation and commissioning of vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 16mm rod tapered to 10 mm aluminium rod : Meets the technical specification according to DIN EN 50164-2 (VDE 0815 part 202). Meets the requirement of VDE0185/305(IS/IEC 62305) 3Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. OBO Type No. 101 VL3000 ( 5401 98 9 ). Accessories : System consist of Fang Fix with base and clamp, on the top air terminal is erected. OBO Type No. F-FIX 16 ( 5403 20 0 ). Fang fix clamp made of SS, lightning tested for 100 KA 10/350 micro sec waveform. 16 KG stone of 365 mm diameter, high level of stability. Quick and easy mo

unting of interception rod using anchors.Concrete, frost-resistant, can be stacked.OBO Type No. F-FIX S16 ( 5403 22 7 )

Supply, installation and commissioning of 10 mm dia solid, round conductor with 250 micron copper coating for using as Air-terminal and structural down conductors in case of structurally utilized concrete columns especially for highly corrosive areas, (i.e., projects / building near sea-shore). The conductors being copper coated can be connected with all accessories such as Cu (Copper), and SS (Stainless steel).

Supply, installation and commissioning of UL Listed & CPRI tested maintenance free, Low carbon copper coated earth rod of 3 metre electrode having diameter of 25 mm with copper coating thickness of 250micron tested as per IEC 62561-2 & is provided with universal clamp made of SS to connect rod with flat conductor. Earth conductivity enhancing compound shall be of 50 kg/pit tested as per IEC 62561-7, TCLP tested. The above arrangements shall be provided with heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system.

Design, supply, installation, testing & commissioning on Grid connected roof top solar PV (photo voltaic) power plant which includes Solar PV Modules (Mono crystaline), Inverters, MMS suitable for 180 kM wind speed, AC DB, DC DB, Lighting arrestor, earthing, cabling and Net metering. The scope also includes maintenance & PV module cleaning for a period of 5 years.

SITC of Centrifugal type Boosting Fire pump of capacity 900 LPM @ 35 M. head with Class-A Insulation, 50 Hz.,415 V, Three Phase Induction Motor , 2880 RPM, complete with all associated accessories.(Kirloskar/ Lubi/ KSB)

SITC of common control panel for Electrical motor driven pump.Automatic Starter Panel for all the boosting fire pumps, complete in all respect. (Havells/BCH)

SITC of Wiring of power cabling as required for establishing automation of the pumping system. (Polycab/Havells) .

SITC of SS Hydrant Valve / Landing valve, of 63 mm NB size, type-A, single headed , oblique type, as per IS :5290/93.(Fireshield/Armour)

SITC of SS short branch pipe with 63 mm male inlet and 19 mm outlet nozzle, as per IS:903. (Fireshield/Armour)

SITC of ISI marked RRL Fire Hose fitted with SS male & female coupling complete by GI wire binding, size: 63 mm NB and 15 meter long each.(Fireshield/Armour)

SITC of MS Hose Box single door for RRL Hose of suitable size to accommodate 1no. of 30 mtr long fire hose and a branch pipe, wall mounted type.(Fireshield/Armour)

Swinging pattern wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 19 mm dia. and 30 mtrs. long with self closing shut-off nozzle. (Fireshield/KK FIRE/Atasee)

SITC of C. I. Butterfly valve as per IS:5321 with matching flange .(Kartar/Sant)

SITC of C. I. Check valve as per IS:5321 with matching flange .(Kartar/Sant)

Distribution Panel for Indoor Unit. Incoming : MCCB: 1 No 63A (16kA) 4P thermal magnetic(TM) with ROM & spreader links. Outgoing: Busbar : 4 Nos 80A, 500V Electrolytic copper strips. 3 nos 32A 10kA 4P MCB 'C' for 4 way TPN BDB. 2 nos 32A 10kA 2P MCB 'C' for 8 way SPN BDB. 3 nos 20A 10kA 2P MCB 'C' for 8 way SPN BDB. 1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CT's

SITC of 25mm NB Ball valve with all accessories.(SKM Plus/Kartar)

SITC of 15mm NB Ball valve with all accessories. (SKM Plus/Kartar)

SITC of Heavy grade MS Pipe as per IS: 1239 with ms bend,flange,nut bolt,gasket etc and two coat of red oxide primer and color to make the system complete.(Jindal/Tata)

SITC of 2-Way fire brigade inlet with all accessories. (Fireshield/Armour)

SITC of Pressure Gauge with connector and all required to complete system. (H Guru/GL Guru)

SITC of Pressure Switch with connector and all required to complete system. (Indifoss/Danfoss)

SITC of Air release valve with connector and all required to complete system. (Kartar/Drp)

Design, supply, installation, testing & commissioning on Grid connected roof top solar PV (photo voltaic) power plant which includes Solar PV Modules (Mono crystaline), Inverters, MMS suitable for 180 kM wind speed, AC DB, DC DB, Lighting arrestor, earthing, cabling and Net metering. The scope also includes maintenance & PV module cleaning for a period of 5 years.

SITC of Structural Steels like ms angle,anchor fastner,tie rod,universal clamp.u-bolt,bullet,nut washer,channel etc as required to complete system.

100 mm Dia

80 mm Dia

65 mm Dia

50 mm Dia

40 mm Dia

32 mm Dia

25 mm Dia