PROVN OF WORK SERVICES AT MES OFFICE, MOTIVATION HALL AND BASKET BALL AT 4 AFSB VARANASI UNDER GE (AF) GORKAHPUR

Amount

Demolition of cement concrete (unreinforced) in ground floors and roof and paving not exceeding 15 cm thickness (below or above ground level) .complete all as specified and directed

Dismantling mild steel work of any description not otherwise provided for any position complete all specified by Engineer-in-Charge.

Erection and fixing only basket ball court poles including embeding in concrete in concrete and scewing etc complete all as specified and directed

M&L for cement concrete type C-2, 1:3:6(40mm graded aggregate) as in mass concrete complete all as specified and as directed

M&L for cement concrete, 40mm thick type B-0,1:2:4 (12.5mm graded aggregate) and finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed

M&L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed.

Material and laabour for Acrylic Sport flooring (Synthetic) in 8 Layers (1 Layer Fiber Mash + 1 Layer of Primer + 2 Layer of resurfacer + 2 Layer of Cushions + 2 Layer Colour + 1 Layer marking) for new concrete surfaces of basket ball court floor Complete all as specified and directed by Engr-in Charge

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 500m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes including laying cable etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed .

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point in soft / soil complete all as specified and directed .

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .

Demolition of cement concrete (reinforced) in RCC column ( reinforcement cut as required to facilitate demolition) complete all as specified and directed

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed .

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed

M&L for PCC (1:4:8) Type D-2 using( 40mm graded stone aggregate ) as in foundations, filling and mass-concrete compete all as specified and directed.

M&L Brick work with subclass 'B' bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed

M&L for RCC Nominal mix type B1 (1:2:4) using (20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, lintel band etc basement slabs, under- reamed piles and mass concrete complete all as specified and directed.

M&L for RCC Nominal mix type B1 (1:2:4) using (20 mm graded stone aggregate) as in lintel over 1.5m span complete all as specified and directed.

Formwork to flats rough finish surface of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, lintel band and similar work; vertical or to batter complete all as specified and directed.

Formwork to flat rough finish surface of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

All as per item no 23 above ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed .

M&L Rendering 15 mm thick in CM 1:4 on fair faces of brick or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions (WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed.Make :- Dr Fixit Pidiproof LW+ or equivalent in specified make

M&L Rendering 10 mm thick in CM 1:6 on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for two coats of oil bound distember on new plaster walls surfaces over a coat of primar over 3mm thick wall care putty after complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified and directed.

M&L Washing rubbing down and stoping of distempered and painted surfaces of wall incuding cornices etc and applying one coat of cement base paint white or tinted complete all specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc.15 cm thick, spread, levelled and rammed including watering complete all as specified and directed

M&L for 100 mm thick cement concrete Type B-2 (1:2:4) using( 40mm graded stone aggregate ) as in sub base of floor compete all as specified and directed.

M&L for 25 mm thick cement concrete type B0 (1:2:4) using 12.5 mm stone aggregate as in sub base of floor tile all as specified and directed by Eng-in-Charge.

M&L for rendering 10mm thick in CM 1:3 CM for dado / skirting on brick work finished fair and smooth for receiving tiles in vertical surfaces all as specified and directed

M&L 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes neat cement slurry with 3.00 kg of cement per sqm complete all as specified and directed by.

S&F Vitrified ceramic tiles double charged coloured 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white, ivory or coloured cement to match. Complete all as specified and directed.

S&F Vitrified ceramic tiles double charged coloured 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white, ivory or coloured cement to match. Complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in wooden texture / brick finished wall tile cement to match complete all as specified and as directed

M&L for steel work in tubular post/trusses including special shaped washer, hollow section, angle iron, flat iron for fixed independently connecting purlin, rafters, MS plate as reqd forming holes bolted and welded attachment and curved shaped by welding making jointless by filling including cutting etc conforming to IS 1161-1979 grade St-240 including work as directed by Engr-in - Charge complete all as specified and directed.

S&F for pre-painted galvatume aluminium zinc coated GI based corrugated, steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roofing covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall and making eaves gutter, fixed with gutter self tapping screws complete all as specified and directed

M&L for preparation of previously untreated steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and appiying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F PVC (SWR) 110mm dia pipes single socketed in any length with rubber joints fixed to walls completed all as specified

S&F PVC (SWR) 110mm dia pipe bends any radius complete all as specified and directed .

S&F mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed .

M&L PCC (1:3:6) type C1 as holdfast block, door frame filing, coping, bedblock etc complete all as specified and directed

Taking down chowkat or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from frames). complete all as spd.

S&F 12 mm thick frosted toughened glass door shutter with SS frame mounted over approved Glass Hinges in single leaf including hardware's like, one number floor mounted SS bush of approved make, with Air Force etchig logo, stainless steel fitting, Stainless steel handle 300 mm long (two No each door), locking arrangement, top patch and bottom patch with stainless steel heavy duty pivot of approved make. The glass shutter shall be grounded Notes : (i) Builder hardware, patchs, pivot, bush, Air Force etching logo, Stainless steel fitting, SS handle, locking arrangement of approved make shall deem to be included in quoted rates. (ii) Floor door spring and stopper shall be measured under respective of this schedule.

M&L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed

M&L Floor door stopper of aluminium alloy body and tongue, powder coated with hard drawn steel spring, (oerall length of cover plate) 140 mm complete all as specified and directed .

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated aluminium ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F 5mm figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed .

SF Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed .

S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L providing and fixing Gypsum Board 12mm thick in ceiling and jointless compound finished comfixed with screw as per manufacturers instructions complete all as specified and directed .

M&L for two coats of oil bound distember on ceilings surfaces over a coat of primar over 3mm thick wall care putty after complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed .

M&L cement concrete 1:3:6 type C2 (40mm graded stone aggregate) in 75 mm thick level coarse complete all as specified and directed

M&L chequered cement concrete tiles 20cm x 20cm x 25mm with grey cement and pigments including 20 mm thick screed bed or bedding layer of mortar for laying floor finishes in cm 1:6, set, jointed and pointed in neat cement slurry in floors complete all as specified

S&F sheet glass shelf assembly consisting of 5.50mm thick glass shelf 12 cm wide with chromum plated bracket guard and railing 60cm long all as specified.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 30cm deep and getting out in soft loose soil

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft loose soil complete all as specified and as directed

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at a level n exc. 1.5 m above the starting point in soft / loose soil complete all as specified and directed .

M&L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

M&L for RCC Nominal mix type B1 (1:2:4) using (20 mm graded stone aggregate) as in chhajja complete all as specified and directed.

Formwork to chhajjas, troughs and similar items including edges rough finished surfaces of cocrete flat complete all as specified and directed

M&L for preparation of new plaster surfaces of wall and applying three coats of White washing complete all as specified and directed.

M&L for Hardcore of broken stone aggregate of gauge exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed

M&L Machine cut kota stone slab flooring 20-25mm thick over 1:6 cement screed 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (joint thickness not to exceed 1mm) complete all as specified and directed .

M&L pre polished Kota stone slab 20-25mm thick in, skirting laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete

S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified as directed

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed

S&F for framed work as in steel doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe-290 Gde-165 complete all as specified and directed

S&F for mild steel, plain, black sheet of thickness of steel in 1.25mm for steel doors and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed .

M&L for 75 mm PCC 1:3:6 type C-2, using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement concrete surface even and smooth including forming construction joint 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and as directed

S&F Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and directed .

M&L for PCC (1:2:4) type B-1 using (20mm graded stone aggregate) as holdfast block, door frame filing, coping, bedblock, chamfered anlge throating etc including necessary form work and finishig the the exposed surfaces complete all as specified and directed

M&L for 40mm thick cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor / paving laid in panels, surface finished even and fair without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:6 on fair faces of brick wall or concrete surfaces , surface finished even and smooth without using extra cement complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for point wiring with two single core 1.5 sqmm cable (nominal area) stranded copper conductor, PVC insulated unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with modular metal flush box, 1.6 mm thick of suitable size and modular white cover plate with frame of suitable module and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly complete all as specified and directed for following :- (a) One light, fan, bell point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on independent board complete all as specified and directed .

(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch complete all as specified and directed .

All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size as a power point complete all as specified and directed .

S&F Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge.

M&L Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

M&L Modular Socket outlet Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed by Engineer in charge.

M&L for Modular Switch piano, flush type single pole, one way 16 Amp all as specified and directed..

S & Fix ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed .

Taking down old and u/s light fittings conventional type from wall surface / ceilling or any position and making good the disturbed surfaces all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make - havells, bajaj, phillips

Supply and fixing wall mounted, downlighting picture focus lights, suitable for illuminating pictures and dispalys, warm white , 10 W 4000K lumen, 220V AC, including coonecting up with three core copper wire of suitable size complete all as directed.Make - havells, phillips

Supply and fixing Decorative wall light, including 9 W LED, warm light, 220V AC including wiring with copper cable of suitable size complete all as specified and directed.

Supply and fixing ceiling mounted focus lights LED 14 W, 220 V AC to be fixed on ceilings for focusing of displays, including wiring with copper cable of suitable size complete all as specified and directed.

Supply and fixing in repairs factory made epoxy powder coated distribution board SPN 12 ways single door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.Make :Indo asian Or eqvt make of Havells/Legrand/HPL

Supply and fixing factory made epoxy powder coated distribution board SPN 8 ways single door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.Make :Indo asian Or eqvt make of Havells/Legrand/HPL

Taking down carefully unserviceable MCCB, MCB SP/SPN/Isolator of any rating/size complete all as specified and directed .

Supply and fixing MCB single pole 240 volt 'C' curve 10 KA 5 to 32 Amps capacity all as specified and directd.

Supply and fixing MCB single pole and neutral (SPN) 240 volt 'C' curve 10 KA, 40 to 63 Amps capacity all as specified.

Supply and fixing Sheet metal Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp complete all as specified and directed .

Taking down old and u/s submain wiring of 2/3 runs of any sizes from any position including, making good disturbed surface of wall ceiling etc all as directed.

M&L for concealed submain wiring using two single core PVC insulated, unseathed FRLS multi stranded copper conductor cable of size 4.0 Sqmm of voltage rarting upto and including 1100 volts drawn in and including concealed PVC conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, FRLS multi stranded copper conductor of size 4 qmm as earth continuity conductor all as specified and directed. (Note : Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit)

Taking down ceiling fan/wall mounted fan by unscrewing nut , bolts, disconnection of electric cable from ceiling rose, ceiling cable end, removing blades , of any sweep and make and deposit to MES Store all as specified and directed.

Supply and fix in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed .

Supply & Fixing ceiling fan 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush less direct current (BLDC) motor, class of insulation : B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service Value ( CMM/W) minimum 6.00, Air delivery minimum 210 CMM 350 RPM ( tolerance as per IS : 374 - 2019), THD less than 10 % ,electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V , 50 Hz, single phase AC supply, earthing etc including necessary connection with ceiling rose with 3 core 1.0 Sqmm PVC insulated round flexible cable and including writing MES No all as specified and as directed.

Shifting of Split type ACs of any capacity (Indoor Unit as well as Outdoor Unit) to nearby location not more than 15m away including removal/cutting and reconnecting by welding of suction and discharge copper tubing and re-filling of gas. Note : Rate quoted shall be exclusive of refilling of Gas

S&F hanging mounting bracket plate stand for mounting of Outdoor Unit of Air conditioner using fasteners complete all as specified and directed by Engr-in-Charge

Supply and fix suction and discharge copper tubing pipe 3/8" and 5/8" for split type AC including provision of insulation on tubing all as specified and directed. Note:- To be measured beyond 3 meter only complete all as specified and directed .

S & F drain pipe for removal of water through AC of size 15 mm required at site all as specified and directed.

Supply and refilling of Refrigerant gas for split type Air conditioner incl checking leakage complete all as specified and directed by Engrs-in-charge..

M&L earthing complete with galvanised steel earth plate 600X600X6.3 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.5 m below GL) connected with Galvanised earth lead wire 4.00mm as earthing leads by means of bolts, nuts, check nuts and washers beside Welding / brazing at all joints as shown on drawings and including excavation, earth work. GI pipe light grade 40 mm bore for protection of GI earth strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed.

Supply and fix exhaust fan made of Steel body complete with blades, frames and louvres , 380 mm sweep, single phase, 230 Volts AC, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing, including writing MES No.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed .

M & L for sand cushioning for under ground cable with locally available sand for protection of cable 8cm before laying cable and 15cm deep over the cable including spreading and consolidations, complete. (Note-Punned thickness ie 18 mm will be measured and paid)

Supplying & Laying Sub Class `B’ bricks, old size, kiln burnt, laid with axis of brick perpendicular to the axis of the cable, for protection of cable all as specified and directed by Engineer-in-Charge.

Material and Labour for boring, holes for inserting of 40/80 mm bore GI pipe under the road/hard standing or any other location not less than 1200 mm deeep complete all as specified and ditected.

M&L for 40 mm Tube, 'light grade', galvanised, with all fitting, laid in trenches for passing cable over the drain and connections upto the required fitting.

Dua Construction (BID ID -3114615)

M/S DEEKSHA CONSTRUCTION (BID ID -3114880)

M/s R.S. Enterprises (BID ID -3115773)

Shiva Builders (BID ID -3114608)

R.J.Enterprises (BID ID -3114518)