FOR CONSTRUCTION OF TOILET AND OTHER MSIC CIVIL WORK AT SDO OFFICE SIDHUALI (RURAL) AND SDO OFFICE SIDHUALI (URBAN) DISTRICT SITAPUR

Amount

Excavation in foundation in ordinary soil (Loam clay or sand) including lift upto 1.5 mtr. and lead upto 30 m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation trenches or in to the plinth and removal and disposal of surplus earth as directed by the Engineer-in-Charge upto a distance of 30 m from the foundation trenches.

Local sand filling in plinth including supply of necessary quantity of local sand outside the UPPCL permises including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work.(Local from approved local quarry)

Earth filling under floors I/C cost of earth when obtained from out side board's area including its carriage I/C watering, ramming in 20 cm. layers & dressing of earth etc. all complete.

Concrete with 4 cm. gauge 1st class brick ballast (Class 150) coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and T&P etc. required for proper completion of work.

Ist class brick work in 1:6 cement & coarse sand (F.M. 1.8 to 2.5) mortar in foundation & plinth including supply of all materials, labour and T&P etc. required for proper completion of work.

Ist Class brick (class 150) work in 1:6 cement & coarse sand (FM1.8 to 2.50) mortar but in supper structure but for wall of one brick thick including supply of all materials, labour T&P etc required for proper completion of work.

Cement concrete with 2 cm. gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) & cement in proportion 4:2:1 including supply of all materials, labour, side shuttering if required and T&P etc. required for proper completion of work.

RCC work with cement approved coarse sand (F.M. 1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3 in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.

RCC work with cement approved coarse sand (F.M. 1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3 in slab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . (CSI No. 5.24)

TMT/Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping and binding wire include. (Steel shall be arranged by the contractor)

Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor.

6 mm. thick plaster with 1:3 cement & coarse sand including labour, materials & T&P etc. required for proper completion of the work.

12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.

12 mm thick plaster rough surface with cement mortar consisting of one part of cement & six part of coarse sand(1:6), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.

One priming coat and two coat oil bound distemper on new work including supply of all materials,labour and T&P etc. required for proper completion of the work.

As in item 13.08 but for every coat on previously old oil bound distemper surface. (two coat)

Applying BIRLA PUTTY or equivalent putty on new or previousaly birla putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.(CSI No.13.21)

Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.22)

3mm thick floating coat of Neat cement finish over roof & walls including supply of materials, labour and T&P etc. required for proper completion of work (cement consumtion 0.044 bag/Sq.m.

Supply and fixing of 110 mm dia PVC pipe 4 Kg./ Sq.cm for water supply mains & rain water pipe of Tirupati or equi. Make with special such as Tee, bend, socket, elbow etc. including cutting of pipe where necessary and including excavation of trenches for laying the pipe line of approved size (600 x 900 mm) and including its back filling after testing the pipe line , watering, ramming etc complete including disposal of surplus earth from the sides upto 100 mtr as per direction of Engineer incharge as required for proper completion of work.

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface, complete with 14 SWG copper earth continuity wire,GP Box ,piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect, as directed .

Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc, complete in all respect.

Wiring Point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface,complete with 14 SWG copper earth continuity wire , GP Box and piano type switch and socket etc. complete in all respect

Wiring point for exhaust fan with 2.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface complete with14 SWG copper earth continuity wire, 15 A piano type switch & ceiling rose on 3 mm.thick henolic laminated backelite sheet etc, complete in all respect.

S/F Batten/Angle Holder/Ceiling rose of approved quality complete in all respect .

Supply and Laying 6 mm thick white glazed tiles of size 450x300 mm in skirting / dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete,including supply of all materials, labour and T&P etc. completion required for proper completion of the work.

Supply and Laying 8 mm thick white glazed floor tiles of Somany, Johnson or equivalent make, of size 300x300 mm, laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc. completion required for proper completion of the work.

Providing and Fixing 16 mm dia PVC Pipe PPR Plumbing System, Non Resting, Anti Microbial, PPR Pipe PN 16/SDR, ISI Marked including supply of all material, labour and T&P etc. required for proper completion of work

Providing and Fixing 25 mm dia PVC Pipe PPR Pipe PN 16/SDR, ISI Marked including supply of all material, labour and T&P etc. required for proper completion of work

Providing and Fixing 25 mm dia PVC full way gate valve, ISI Marked including supply of all material, labour and T&P etc. required for proper completion of work

P/FBRASS BIB COCK, 15 mm dia (200 gms) ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

Supply and fixing P.V.C. cistern Hindustan or equivalent make 10 litres. Capacity complete with all accessories (Low level) including all materials, labour and T&P etc. complete.

Providing and fixing 100 mm dia PVC "P" or "S" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.) (CSI No. 27.24)

Supply and fixing Syntex or equivalent make water storage tank including all materials, labour and T&P etc. required for the proper completion of the work.

Providing and fixing flat back 465 mm.x 355 mm x 265 mm. size lipped front urinal basin of white glazed earthern ware first quality (Hindutan, Neycer make) I.S.I. marked including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.05)

Providing and fixing white glazed earthen ware W.C. "Orissa" Pan Hindustan make of size (58×44)cm including supply of all materials, labour and T&P etc. required for proper completion of the work.

Providing and fixing 450x300 mm wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindustan,Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work.

Supply and fixing of Bajaj Fresh/Exhaust fan including cost of all materials, labour, T&P etc. for proper completion of the work.

Providing and fixing 100 mm dia C.P. grating over Nahani Trap or drain holes including cost of all materials, labour and T&P etc. required for proper completion of the work.

Supply and fixing Nahani Trap India make of heavy approved quality complete with C.P. brass grating, Nahani Trap laid over base cement concrete 1:6:12 including cost of cement supply of all materials, labour and T&P etc. required for proper completion of the work.

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metres. (CSI No. 15.01)

Repair to plaster or pointing in patches including removal of old plaster racking out joints to 1 cm.(3/8") depth,watering the area and then replastering or reappointing with the same mortar or proportion of mortar as the existing surface including supply of all materials, labour and T&P etc. required for proper completion of the work . (CSI No. 20.02)

Repair to 2.5 cm (1") cement concrete floor in patches including up to 10 cm.(4") depth renewing 8 cm.(3") base concrete consisting of one part cement, 4 parts aproved coarse sand and 8 parts of 4 cm.(1.5") gauge brick ballast as in C.C.floor consisting of one part cement 2 parts approved coarse sand and 4 parts approved stone grit including supply of all materials.labour and T&P etc. required for proper completion of the work. (CSI No. 20.03)

Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20)

Same as in item 13.17 but for each coat of water proof cement paint. on previously treated surface. (CSI No. 13.19)

Engaging of labour for misc. civil works with required T&P

Note :- 1 GST Will paid only extra as applicable. 2 Quantity of individual item may increase or decrease to any extent as per site condition 3 Dismantling item work if recovery required it deducted from contractor bill’s 4 All the item rates including labour cess, no extra payment shall be done.

M/s V.S. Constrcution

M/S ANSH CONSTRUCTION AND DESIGN GROUP

M/S G.K.TRADERS