Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
1 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE (WEST) JALANDHAR CANTT
KABIR ROAD JALANDHAR CANTT
REPAIR REPLACEMENT OF BUILDING SECURITY LIGHT OF OTM ACCN AND MD ACCN UNDER GE (W) JRC
2026_MES_798303_1
GE/JAL(W)-19/2026-27
Open Tender
Civil Works
Item Rate
335 days
JALANDHAR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (WEST)
₹40,000
Yes
12 Nov 2026
12 Nov 2026
8 Dec 2026
12 Nov 2026
1 Dec 2026
26 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M&L in repair for point wiring with PVC insulated, unsheathed cable single core multistranded copper conductor FRLSH cable 1.5 sqmm size, 1100V grade, drawn into and including PVC rigid concealed conduit medium grade (ISI marked) including PVC unsheathed cable single core copper FRLSH conductor 1.5 Sqmm as continuous earth wire and including pressed MS sheet sunken box 1.6 mm thick with 3 mm thick laminated bakelite sheet all as specifiedand directed.
(a)One light / fan / call bell point controlled by one, one way switch. | 25 | Point | - | - |
| 2 | Supply & fixing in repair switch piano flush button type single pole one way 6 Amps all as specified. | 25 | Each | - | - |
| 3 | Supply & fixing in repair ceiling roses surfaces bakelite two three terminals 65 x 50 mm all as specified. | 415 | Each | - | - |
| 4 | S&F SITC of high-quality integrated LED Street Light with a minimum system lumen of4750 Lm and system wattage not exceeding 45W with a nominal efficiency 105 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI >70. The housing should be of non-corrosive high-pressure die-cast aluminum with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with PF > 0.95. Lifetime of 50K hours @L70. The Luminaire should have Powered by integral, Isolated LED electronic driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Surge Voltage protection upto 4 kV. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/ULaccredited lab to verify above parameters including bracket and fixing clamps etc and connecting electricalconnections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed. | 200 | Each | - | - |
| 5 | S&F of SITC of high-quality integrated LED Street Light with a minimum system lumen of 6600 Lm and system wattage not exceeding 60W with a nominal efficiency 110 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI >70. The housing should be of non-corrosive high-pressure die-cast aluminum with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with PF > 0.95. Lifetime of 50K hours @L70. The Luminaire should have Powered by integral, Isolated LED electronic driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Surge Voltage protection upto 4 kV.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters including bracket and fixing clamps etc & and connecting electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed. | 150 | Each | - | - |
| 6 | S&F SITC of high-quality LED Flood Light with a minimum system lumen of 6000 Lm and system wattage not exceeding 50 W with a nominal efficiency 120 lumen/watt. CCT of 5700K with CRI >70. The housing should be of pure polyester powder coated die-cast aluminum with high efficiency LEDs as lighting source. The fitting should have PC reflector for maximum output and PC Lens for symmetric distribution & tempered protective Toughened Glass with IP66 protection and impact resistance of IK07 with PF > 0.95. Lifetime of 50K hours @L70. The Luminaire should have Powered by integral, Isolated LED electronic driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Surge Voltage protection upto 6 kV.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters and connecting electricalconnections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete as directed. | 25 | Each | - | - |
| 7 | S&F SITC of high-quality LED Flood Light with a minimum system lumen of 12000 Lm and system wattage not exceeding 100 W with a nominal efficiency 120 lumen/watt. CCT of 5700K with CRI >70. The housing should be of pure polyester powder coated die-cast aluminum with high efficiency LEDs as lighting source. The fitting should have PC reflector for maximum output and PC Lens for symmetric distribution & tempered protective Toughened Glass with IP66 protection and impact resistance of IK07 with PF > 0.95. Lifetime of 50K hours @L70. The Luminaire should have Powered by integral, Isolated LED electronic driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Surge Voltage protection upto 6 kV.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters and connecting electricalconnections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete as directed. | 40 | Each | - | - |
| 8 | Supply and fixing of new generation, post top, energy saving spun aluminium landscape luminaries with high power 40W LED , IP65 protection suitable for Pole dia 76mm pole complete with all accessories. Luminaire shall be made of pressure die cast/spun aluminium housing with high transmission clear diffuser, corrosion resistant powder coated finish, high efficiency LED driver with surge protection, minimum system efficacy 100 lm.W, CCT 3000K/4000K/6500k, CRI > 80, operating voltage 140-270 V AC complete all as directed. | 30 | Nos | - | - |
| 9 | M & L for LED TURIN BOLLARD gardern light fitting with post 10 Watt WHITE/WARM Luminaire ,Unique concept LED Bollard in IP 66 rating and connecting electrical from cable using PVC insulated and overall sheathed flexible copper conductor of size 0.75 mm 3 core including making of suitable size of platform PCC as per manufacturer design with nuts, bolts & washers ,incl provn on incoming and outgoing supply for light fitting in platform with PVC med grage pipe/bend and all necessary connection complete all as specified and directed. | 30 | Each | - | - |
| 10 | Supply and laying XLPE insulated , armoured electric cable heavy duty with aluminium conductor , 1100 volts UG cable of size 3 Core 10 Sqmmm. | 150 | RM | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.23 MB
BOQ_895550.xls
BOQ • 0.27 MB
TenderDocuments19.pdf
Tender Documents • 0.81 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .