PROVISION OF DEFICIENT OFFICERS MARRIED ACCOMMODATION 220 DUs G PLUS 62 INCLUDING DEMOLITION OF FOUR BLOCKS P Q J AND K AT NOFRA COLABA MUMBAI

Amount

SCHEDULE "A" Part - I (BUILDINGS & STRUCTURES WORKS) Total of Sch-'A' Part-I B/F

SCHEDULE "A" PART-II (SITE CLEARANCE, EXCAVATION & EARTHWORK) Total of Sch-'A' Part-II B/F

SCHEDULE "A" PART-III (DEMOLITION / DISMANTLING) Total of Sch-'A' Part-III B/F

SCHEDULE "A" PART-IV (INTERNAL WATER SUPPLY) Total of Sch-'A' Part-IV B/F

SCHEDULE "A" PART-V (INTERNAL ELECTRICFICATION) Total of Sch-'A' Part-V B/F

SCHEDULE "A" PART- VI (ROAD / PATHS / CULVERT) Total of Sch-'A' Part-VI B/F

SCHEDULE "A" PART-VII (SEWAGE DISPOSAL) Total of Sch-'A' Part-VII B/F

SCHEDULE "A" PART-VIII (RAIN WATER HARVESTING) Total of Sch-'A' Part-VIII B/F

SCHEDULE "A" PART-IX (GATES AND BOUNDARY WALL) Total of Sch-'A' Part-IX B/F

SCHEDULE "A" PART-X (EXTERNAL ELECTRIFICATION) Total of Sch-'A' Part-X B/F

SCHEDULE "A" PART-XI (EXTERNAL WATER SUPPLY) Total of Sch-'A' Part-XI B/F

SCHEDULE "A" PART-XII (TREATED WATER SUPPLY) Total of Sch-'A' Part-XII B/F

SCHEDULE "A" PART-XIII (FIRE FIGHTING) Total of Sch-'A' Part-XIII B/F

SCHEDULE "A" PART-XIV (CIVIL WORKS FOR DG SET AND ELECTRICAL TRENCH [OUTSIDE BUILDING]) Total of Sch-'A' Part-XIV B/F

SCHEDULE "A" PART-XV (STANDBY POWER SUPPLY [DG]) Total of Sch-'A' Part-XV B/F

SCHEDULE "A" PART-XVI (AVIATION LIGHT) Total of Sch-'A' Part-XVI B/F

SCHEDULE "A" PART-XVII (TV/ Telephone Conduits) Total of Sch-'A' Part-XVII B/F

SCHEDULE "A" PART-XVIII (HORTICULTURE AND LANDSCAPE) Total of Sch-'A' Part-XVIII B/F

SCHEDULE "A" PART-XIX (PRIME COST SUM) Provision of modern convergence and latest digital technology based fibre to house and direct to home services encompassing internet broadband, telephony, TV and CCTV services complete all as specified and directed by Engineer-in charge.

SCHEDULE "A" PART-XX (Miscellaneous Items) SITE CLEARANCE, EXCAVATION & EARTHWORK

Removing excavated material (any type) and disposing it outside Ministry of Defence Land. Note for 20.01 (i) Before quoting the tender, the bidders are advised to ascertain the distance outside MD and at which the excavated material/ debris are to be disposed off. No extra claim what-so-ever shall be entertained on this account. (ii) This item shall be considered as per the requirement at site.

DEMOLITION / DISMANTLING

Taking down PVC water tank capacity complete all as specified and directed by Engineer-in charge.

Removing demolished debris/rubbish material (except retrieved material as specified in Sch. of Credit) and disposing it outside Ministry of Defence Land. Note for 21.02 (i) Before quoting the tender, the bidders are advised to ascertain the distance outside MD and, at which the excavated material/ debris are to be disposed off. No extra claim what-so-ever shall be entertained on this account. (ii) This item shall be considered as per the requirement at site.

Taking down old u/s tube light fitting of any type and capacity from walls/ceiling etc. complete all as specified and directed by Engineer-in charge.

Taking down old u/s MCB DBs complete with MCBs, Isolator etc of any type and capacity from walls/ceiling etc. complete all as specified and directed by Engineer-in-Charge.

Taking down old u/s sub main cable of size 6 sq.mm to 50 sq.mm of any type from walls/floor/ceiling, etc. complete all as specified and directed by Engineer-in-Charge.

Taking down old u/s socket of any type and capacity from walls/ceiling etc. complete all as specified and directed by Engineer-in charge.

Taking down old u/s ceiling rose & fan regulator of any type and capacity from walls/ceiling etc. complete all as specified and directed by Engineer-in-Charge.

Taking down old u/s ceiling fan of any type and capacity from walls/ceiling etc. deposited to MES store complete all as specified and directed by Engineer-in-Charge.

Taking down old u/s changeover switch of any type complete all as specified and directed by Engineer-in-Charge.

Taking down unserviceable Kitchen Sinks of any size with all fittings complete in all respect as specified and directed by Engineer-in charge.

Taking down Water Closet of any Size / Type with all fittings complete in all respect as specified and directed by Engineer-in-Charge.

INTERNAL WATER SUPPLY

S & F Shower arm casted 190mm long light body round shape for wall mounted showers with flange complete all as specified and directed by Engineer-in-Charge. Make-Jaquar Model No : SHA-CHR-477 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F Overhead shower single flow 100 mm dia (abs cp), complete all as specified and directed by Engineer-in-Charge. Make-Jaquar Model No: OHS-CHR-1989 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F Concealed body for single lever diverter complete all as specified and directed by Engineer-in-Charge. Make - ESSCO Model No: ALE-CHR-055 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F 1.5 / L exposed parts kit of single lever diverter complete all as specified and directed by Engineer-in-Charge. Make - ESSCO Model No: APR-CHR-101055NK or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F bath spout with wall flange complete all as specified and directed by Engineer-in-Charge. Make-Jaquar Model No: Aspire SPE-CHR-101429 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S&F Chromium plated wall mixer with provision for overhead shower connection with 115 mm long bend pipe on upper side, connecting legs & wall flanges complete all as specified and directed by Engineer-in-Charge. Make-Jaquar Model No CQT-CHR-23281UPR or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F for concealed stop cock, Regular body with adjustable wall flange, size 15mm dia with spindle extensions (without exposed parts) complete all as specified and directed by Engineer-in-Charge. Make-Jaquar Model No: ALD-CHR-083CQT or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F for Exposed Part Kit of Concealed Stop Cock complete all as specified and directed by Engineer-in-Charge. Make-Jaquar Model No: CQT-CHR-23083K or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F Angular stop cock Triangular Handle complete all as specified and directed by Engineer-in-Charge. Make-Jaquar Model No: AQT-CHR-3057P or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F Auto Closing Urinal Flush Valve complete all as specified and directed by Engineer-in-Charge. Make-Jaquar Model No: PRS-CHR-077 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F Sink Cock with J Shaped (Table Mounted) complete all as specified and directed by Engineer-in-Charge. Make-Jaquar Model No: CON-CHR-359KN or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F two way bib cock with Flange complete all as specified and directed by Engineer-in-Charge. Make-Jaquar Model No: CQT-CHR-23041 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F Bib Cock with Wall Flange complete all as specified and directed by Engineer-in-Charge. Make-Jaquar Model No: CQT-CHR-23047 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F Bib Cock with nozzle complete all as specified and directed by Engineer-in-Charge. (For Washing Machine) Make-Jaquar Model No: CON-CHR-049NKN or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F Hand Shower (Health Faucet) (Abs Body) complete all as specified and directed by Engineer-in-Charge. Make-Jaquar Model No: ALD-CHR-587 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F Brass Forged Pressure Reducing Valves complete all as specified and directed. Make - ZOLOTO (Article No: 1040B HSN CDE : 84811000) or Techno-commercial equivalent in makes mentioned in Particular Specification.

a) 50mm dia

b) 32mm dia

c) 25mm Dia

S & F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. Make - ZOLOTO (HSN CDE : 84819090) or Techno-commercial equivalent in makes mentioned in Particular Specification.

a) 65mm dia

b) 80mm dia

c) 100mm Dia

S & F Loft Tank 200 Litres (minimum) virgin HDPE FDA grade material complete all as specified and as directed by the Engineer-in-Charge.

INTERNAL ELECTRIFICATION

S & F 25A shuttered socket conforming to IS: 1293-1988 for Air Conditioner complete all as specified and directed by the Engineer-in-Charge. Make: Havells SAP Code:AHFKCXW253 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F 25A SP 'C' Mini MCB for Air Conditioner complete all as specified and directed by the Engineer-in-Charge. Make: Havells SAP Code:DHFNCSPA025 or Techno-commercial equivalent in makes mentioned in Particular Specification.

Supplying and fixing of modular type Blanking plate with ISI mark and approved make, including necessary fixing arrangement complete all as specified and directed by the Engineer-in-Charge. Make: Legrand Cat No:5734 49 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F factory made not less than 1.2 mm thick sunken, 8 module modular flush sheet galvanized metal enclosure having zinc coating not less than 120 GSM, , conforming to IS 14772: 2000, having top, bottom, side and back-wall knockouts for conduit entry from any direction, suitable modular cover-plates complete all as specified and directed by the Engineer-in-Charge. Make: Legrand Cat No:6890 31 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F LVDB (Low voltage DB) for TV/Telephone suitable for IP 43, Isolated Neutral bar & Shrouded bus bar, Mechanical Impact strength IK08, factory fitted Krone TV &Tel socket, Door earthing, SPN 8 Way complete all as specified and directed by the Engineer-in-Charge. Make: IndoAsian Cat no: 811963 or Techno-commercial equivalent in makes mentioned in Particular Specification.

Supply and fix time switches astro type MicroRex analog time switches In accordance with IEC 60730-1 and 60730-2-7 Manual switching ON/automatic/OFF Hourly/daily/weekly switching dial with captive segments Clock precision: +/– 5 min for the daily time switch –10 °C to +55 °C operating temperature (Having longitude and latitude of Indian cities in memory) 250 V of 20 Amp rating with contactor fitted inside steel enclosure complete all as specified and directed by the Engineer-in-Charge. (For Street Lights & Landscape-Decorative Lights) Make: L&T Cat No: AUTS02AST00 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F LED tube light fittings decorative ultra slim linear fixture with extruded aluminium heat sink environmental friendly Energy efficient ready to use pack, 22 Watt, 4 feet, surface mounting type extruded PVC, snap on installers and domestic electronic Driver, connector block etc. with all accessories internally prewired & including connecting up with 2 core flexible copper conductor cable with suitable size & suitable for and mounting clamps PVC square box 75x75mm - 2 nos etc complete all as specified and directed by the Engineer-in-Charge.

S &F LED tube light fittings decorative ultra slim linear fixture with extruded aluminium heat sink environmental friendly Energy efficient ready to use pack, 20 Watt, 4 feet, surface mounting type extruded PVC, snap on installers and domestic electronic Driver ,connector block etc. with all accessories internally prewired & including connecting up with 2 core flexible copper conductor cable with suitable size & suitable for and mounting clamps PVC square box 75x75mm - 2 nos etc complete all as specified and directed by the Engineer-in-Charge. Make: HAVELLS Cat No: LHEXACP7UN1WO20 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S &F LED tube light fittings decorative ultra slim linear fixture with extruded aluminium heat sink environmental friendly Energy efficient ready to use pack, 10 Watt, 2 feet, surface mounting type extruded PVC, snap on installers and domestic electronic Driver, connector block etc. with all accessories internally prewired & including connecting up with 2 core flexible copper conductor cable with suitable size & suitable for and mounting clamps PVC square box 75x75mm - 2 nos etc complete all as specified and directed by the Engineer-in-Charge. Make: HAVELLS Cat No: LHEXACP7IN1W010 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F 13.5 W LED 6000 K Bulkhead designed for modern homes available in non PIR as well as PIR sensor with premium quality diffuser for glare free light and easy to install snap fit installer complete all as specified and directed by the Engineer-in-Charge. Make: HAVELLS Cat No: LHEXCGP7IN5W013 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F Skirting Light with white LED- 3 Module complete all as specified and directed by the Engineer-in-Charge. Make: Legrand Cat No: 6455 97 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F 20W LED batten with Microwave motion technology for providing an energy-efficient solution and with aluminium housing & integrated electronic driver, Made of Aluminium Extrusion with housing part in white finish & diffuser part in opal finish, High efficiency long life LED chips with lumen efficacy of 130lm/W with a viewing angle of 120°to ensure better lumen output, Powered by an integral electronic driver (SMPS based constant current supply) with Output Short-circuit protection, Surge protection & other safety test as per IS:15885 Part 2/Sec 13,Can be fixed directly into the wall/ ceiling by means of mounting clips provided with the fixture complete all as specified and directed by the Engineer-in-Charge. Make: HAVELLS Cat No: LHEDAAP7NW1W020 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S&F Energy efficient BEE five star rated ceiling fan, 1200 mm sweep high speed BLDC, including 2 module type 120W step fan regulator and connecting up including provision of three core flexible copper wire of size 23/0076 from ceiling rose to ceiling fan complete all as specified and directed by the Engineer-in-Charge. Make: HAVELLS HSN code:8414 ES Neo or Techno-commercial equivalent in makes mentioned in Particular Specification.

S&F Exhaust fan of size 230/ 250 mm sweep metal body complete with and louvers connecting up including provision of three core flexible copper wire of size 23/0.0076 from ceiling rose to exhaust fan complete all as specified and directed by the Engineer-in-Charge. (For Kitchen) Make - Havells Model Ventilair DB Neo or Techno-commercial equivalent in makes mentioned in Particular Specification.

S&F Fresh air Exhaust fan of size 230/250 mm sweep complete with and louvers connecting up including provision of three core flexible copper wire of size 23/0.0076 from ceiling rose to exhaust fan complete all as specified and directed by the Engineer-in-Charge. (For toilets) Make - Havells Model Ventil Air-DX white or Techno-commercial equivalent in makes mentioned in Particular Specification.

S&F Exhaust fan heavy duty of size 450 mm sweep metal body complete with and louvers connecting up including provision of suitable length of three core flexible copper wire of size 23/0.0076 from ceiling rose to exhaust fan complete all as specified and directed by the Engineer-in-Charge. (For pump house/Substation) Make - Havells Model Turbo Force SP or Techno-commercial equivalent in makes mentioned in Particular Specification.

S&F of 1000 mm x 100 x 2 mm thick Ladder type hot dip galvanised cable trays including supports made with hot dip galvanised perforated sheets, structural angles, rods, anchor fasteners, nuts, washers etc. complete all as specified and directed by the Engineer-in-Charge.

S&F of 600 mm x 100 x 2 mm thick mm thick Ladder type hot dip galvanised cable trays including supports made with hot dip galvanised perforated sheets, structural angles, rods, anchor fasteners, nuts, washers etc. complete all as specified and directed by the Engineer-in-Charge.

S&F of 450 mm x 100 x 2 mm thick Ladder type hot dip galvanised cable trays including supports made with hot dip galvanised perforated sheets, structural angles, rods, anchor fasteners, nuts, washers etc. complete all as specified and directed by the Engineer-in-Charge.

S&F Ekinox³ TPN DB-VTPN DPX³ 160 MCCB DB's As per IEC 61439-3 Suitable for Flush Mounting and Surface Mounting With 250 A Copper Bus bar for each phase With 2 Neutral bar, 2 Earth bar and Cable ties for Cable management Fully insulated bus bar & shrouded Neutral bars, Improved Pan assembly for ease of installation, Pre-fitted masking sheet, Reversible Door for IP 43 & IP 54 DB's, With provision for DPX³ 160 MCCB as incomer and SP/TP MCB's as outgoing, VTPN DB 6 way complete all as specified and directed by the Engineer-in-Charge. Make: LEGRAND Cat No. 5077 46 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F ISI marked MCB having breaking capacity Icn = 10 kA, conforming to IS/IEC 60898-1-2002, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, 25A, SPN MCB 'B' curve complete all as specified and directed by the Engineer-in-Charge. Make: LEGRAND Cat No: 4086 16 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F ISI marked MCB having breaking capacity Icn = 10 kA, conforming to IS/IEC 60898-1-2002, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, 40A, FP MCB 'B' curve complete all as specified and directed by the Engineer-in-Charge. Make: LEGRAND Cat No: 4087 00 or Techno-commercial equivalent in makes mentioned in Particular Specification.

M & L for earthing complete with galvanised steel earth plate electrode of 60 cm x 60 cm x 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strip of size 32x6 mm as earth lead, by means of bolts, nuts, check nuts and washers of galvanised iron or steel, galvanized iron pipe of 40 mm diameter, connected to earthing test point, all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. complete all as specified and directed by the Engineer-in-Charge. (Internal Electrification- 10, Fire Fighting - 2, External Water Supply - 2, External Electrification - 16)

S & F modular type 1 module RJ 11 telephone socket with shutter including galvanized sheet metal box, recess mounted all complete all as specified and directed by the Engineer-in-Charge. Make: Legrand Cat No: 5734 26 or Techno-commercial equivalent in makes mentioned in Particular Specification.

BLANK

BLANK

BLANK

BLANK

BLANK

BLANK

S & F modular type 1 module TV socket including galvanized sheet metal box, recess mounted complete all as specified and directed by the Engineer-in-Charge. Make: Legrand Cat No: 5734 25 or Techno-commercial equivalent in makes mentioned in Particular Specification.

BLANK

BLANK

BLANK

BLANK

BLANK

S & F Energy Meter Din rail mounted single phase 20A with two module, direct measurement having backlite LCD display with power & consumption indicators LED complete all as specified and directed by the Engineer-in-Charge. (For Servant quarter)

M & L for 1.1 KV grade aluminium conductor, XLPE insulated unarmoured cable confirming to IS-7098 (Part-I) 1988 having stranded aluminium compact shaped conductors as per Cl. 2 of IS-8130 : 1984, PVC inner sheath and PVC type ST-2 outer sheath confirming to IS-5831 : 1984, including necessary clamping/dressing with cable ties and termination complete of size 4 core x 25 sqmm (from tap-off box to floor DB) all as specified and directed by Engineer-in-Charge.

EXTERNAL ELECTRIFICATION

M & L for 1.1 kV grade copper conductor, XLPE insulated armoured cable conforming to IS 7098 (Part 1): 1988, having stranded copper compact shaped conductors as per Cl. 2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanised steel strip/wire and PVC Type ST-2 outer sheath conforming to IS 5831: 1984, including necessary clamping / dressing with cable ties and termination complete including suitable size of lugs, gland etc. all as specified and directed by engineer- in- charge.

a) 4.0 core 25 mm² (for lifts)

b) 4.0 core 10 mm²

c) 4.0 core 6 mm²

BLANK

BLANK

Main Panel-1 Supply, installation, commissioning and testing of Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, cabling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. all complete as specified and directed.

Main Panel-2 Supply, installation, commissioning and testing of Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. all complete as specified and directed.

Common Area Service Panel-1 Supply, installation, commissioning and testing of Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. all complete as specified and directed.

Common Area Service Panel-2 Supply, installation, commissioning and testing of Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. all complete as specified and directed.

Car Charging Panel Supply, installation, commissioning and testing of Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. all complete as specified and directed.

Lift Panel Supply, installation, commissioning and testing of Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. all complete as specified and directed.

Pressurization Panel Supply, installation, commissioning and testing of Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. all complete as specified and directed.

S & F Bollard light, Height: 500mm, Dimension: Tr.130 x 500,Fixing: Over Ground, IP Rating: IP 65,Lamp Type: 9W LED ,Light Colour : Warm White complete all as specified and directed by Engineer-in-Charge. Make : K-LITE ID: 6952 (Ritu Bollard-L2) or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F Spike light, Fixing: Over Ground, IP Rating: IP 65, Dimension : 72 x 117 x 430, Lamp Type: 1X3W Led Light, Colour : Warm White complete all as specified and directed by Engineer-in-Charge. Make : K-LITE ID: 6998/99 (Trioscape Spike-L3) or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F KL-8184 Two Way Connector (IP 67), 2 Way Connector (L3) complete all as specified and directed by Engineer-in-Charge. Make : KL-8184 or Techno-commercial equivalent in makes mentioned in Particular Specification

S & F Wall recessed light, Fixing: Wall, IP Rating: IP 65, COD : 126 x 71 x 83 Lamp Type: 3W LED Light, Colour : Warm White complete all as specified and directed by Engineer-in-Charge. Make : K-LITE ID: 2756 (Sudo Mini - Grid Frame-L4) or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F Flexible LED strip light, FIXING: Mounted Wall, IP RATING: IP 65, Dimension : 5m / Roll LAMP TYPE:6W/M LED Light, Colour :Warm White complete all as specified and directed by Engineer-in-Charge. Make : K-LITE ID:7945 12V 2835 (L5) or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F Non-Waterproof power supply,12V, Wattage : 12V dc 2.5A 30W Power unit (L5) complete all as specified and directed by Engineer-in-Charge. Make: KL-8249 or Techno-commercial equivalent in makes mentioned in Particular Specification

S & F Wall Washers, Fixing: Column, IP RATING: IP 65, Dimension : Ø200 x 75 LAMP TYPE: 6X3W LED, LIGHT COLOR : OVER GROUND complete all as specified and directed by Engineer-in-Charge. Make : K-LITE ID: 4090 (In-Ground Luminaire-L6) or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F of 2 Way Connector, Wattage : IP68 2 Way Connector (L6) complete all as specified and directed by Engineer-in-Charge. Make : KL-8160 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F Post Top Light, Height: 3.0M, Fixing: Over Ground, IP rating: IP 65, Dimension: Ø590 x 450, Lamp type: 45 W LED Light, Colour : Warm White complete all as specified and directed by Engineer-in-Charge. Make : K-LITE ID: 5340 (Double Standard-L1A) or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F Cyclo Aluminium Lighting Pole, Ht.4000 (L1A) complete all as specified and directed by Engineer-in-Charge. Make : KP-4365 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F Foundation Bolt, 4 Nos of M16 x 300 mm bolt with 2 Nuts & 2 Washer (L1A) complete all as specified and directed by Engineer-in-Charge. Make : KP-9204 or Techno-commercial equivalent in makes mentioned in Particular Specification

S & F Post top Light, Height: 9.0M,Fixing: Over Ground, IP Rating: IP 65 Lamp type: 2x60W LED Light, Colour :Warm White complete all as specified and directed by Engineer-in-Charge. Make : K-LITE ID: KP-7234 (Recta Polar Lighting Ploe-L1) or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F Foundation Bolt, 4 Nos of M20 x 500 mm bolt with 2 Nuts & 2 Washer (L1) complete all as specified and directed by Engineer-in-Charge. Make :KP-9206 or Techno-commercial equivalent in makes mentioned in Particular Specification.

Supply, installation, testing and commissioning of sandwich type (3P4W,100%N), bus bar trunking system complete with two runs of 25 mm X 3mm aluminium earthing strip and accessories all as specified and directed. The bus bar trunking system shall conform to the following technical specifications: i] System details : The Bus bar Trunking System shall be suitable for operational Voltage of 415V / 690V / 1000V with supply frequency of 50Hz / 60Hz, minimum insulation voltage of 1100V & impulse withstand voltage of 8kV & higher. ii]Standards : The Bus bar Trunking System shall be designed to comply in accordance with the following international standards, IEC 61439 – Part 1 : Low voltage switchgear & control gear assembly- General rules IEC 61439 – Part 6 : Bus bar Trunking Systems (busways) IEC 60529 : Degree of protection IS 8623 – Part 2 : Specification for Low Voltage Switchgear & Control gear Assemblies IS 1893 – Part 1 : Criteria for Earthquake Resistant Design of Structures IEEE 693:2005 : High Seismic Qualification Level Wherever required and specified, the Bus bar Trunking System shall conform to Fire Rating of 600 deg C for 2 Hours. Bus bar Trunking System should also have Seismic Zone-5, Flame Propagation and Fire Resistance certification.

iii]General : The Bus bar Trunking System shall be of sandwich construction, non-ventilated and natural cooled design. It shall be possible to mount the Bus bar Trunking System in any orientation without affecting the current rating. iv]Bus bars : 1] The bus bars should be made of high conductivity electrical grade Aluminium (>60% IACS) 2] Purity of Aluminium conductor should not be less than 99.6% 3] Aluminium bus bars should be Tin plated at the joint area to avoid oxidation 4] Where an earth conductor is required, it shall be possible to provide internal earth conductor of the same high conductivity material as the phase conductors and at least of 50% cross section of the phase conductor. Provision for mounting external earth strip to be provided on both side of bus duct if required. 5] It should be possible to provide a 200% Neutral where specified in BOQ v] Insulation : 1] Each bus bar shall be individually insulated by means of Class-F Insulation, if it is multilayer insulation then each layer must have temperature withstand capacity of 155 deg C (Class-F) as well as breakdown voltage of minimum 6kV. 2] Mica insulation is not allowed which can’t be wrapped completely on conductor edges 3] The insulation should be UL certified 4] Insulation must be Halogen free & RoHS compliance

vi] Housing : 1] The housing shall be made with 1.6mm thick electro-galvanized sheet steel of superior grade with Epoxy powder coating to withstand stringent site conditions; e.g. Humid, Costal, Acidic, etc 2] Enclosure must be dust & vermin proof and Provision for mounting external earth strip should be available on Bus duct. 3] IP rating of indoor bus duct must be IP-54 / IP-55 & Outdoor bus duct should be IP-65 / IP-66 plus canopy should be provided for protection of Bus duct from direct sunlight & heavy rains. 4] Enclosure must be powder coated from both sides (internal & external) vii] Joints : 1] The joint design shall have inbuilt provision of absorbing expansion & contraction of 12mm per joint during operation. 2] The joint insulation must be of single piece moulded design of thermoset material for longer life and higher temperature withstand & better insulation property. 3] The joint construction must allow +/- 3mm adjustment at the time of installation, for ease of adjusting to site measurement variations. 4] Stopper arrangement must be provided at every joint to prevent excessive insertion of conductors while jointing 5] The joint bolt must be insulated with a bolt insulator. The bolt insulator must be of moulded one piece. 6] The joint design shall have inbuilt provision to prevent excessive insertion of bus duct which can damage the bolt insulator. 7] The bus bar ends shall not have holes or slots at the joints to avoid reduction in cross section area which will lead to temperature increase. The electrical continuity shall be through pressure plates, achieving a high contact area of joint cross section and expansion capability. 8] It shall be possible to install and remove the joints without disturbing the adjacent feeder section 9] Joint set should have insulators with temperature withstand capacity of class-F

viii] Plug-in Unit / Tap off units : 1] Plug-in Units must be type tested design from NABL accredited laboratory for tests like, Thermal cycling test, Temperature rise test, Short time withstand voltage, Mechanical operations, Impulse withstand voltage, Clearance & Creepage, Mechanical impact and ingress protection test 2] Plug-in unit must achieve IP-54 protection & IK10 mechanical impact 3] Plug-in Units must have interlocks with Bus duct, door and MCCB for human safety 4] Bus duct interlock – a) When the MCCB in the Plug-in unit is in ‘ON’ position, the operator should not be able to open the door. b) MCCB can’t be switched ON even when Plug-in Box is mounted on Bus duct; it is possible only if interlock plate is engaged with feeder 5] Door interlock – a) Door can’t be opened when MCCB is ON b) MCCB can’t be switched ON until door is completely closed c) Door defeat feature should be available to use in case of emergency 6] The design of plug-in units shall be such that, the Earth conductor shall be of ‘First-Make’ ‘Last-Break ’type. 7] It should be possible to mount Plug-in Unit even when Bus duct is in live condition but while insertion MCCB must be in OFF condition 8] The Plug-in unit will be suitable for accommodating MCCBs or other accessories, as required. The Plug-in unit should allow the flexibility of accommodating different reputed MCCB makes, to be mutually agreed depending on the tender requirements. 9] Plug-in Unit must be operated using side handle without MCCB ROM, and provision of Padlocking must be provided for human safety 10] Plug-in Unit must have Lifting provision for ease of handling and Guide pin for ease of installation 11] LED indicator must be provided on Plug-in Unit door which will glow once MCCB is switched ON 12] Plug-in units should be plug-in type up to 400A & Bolt-on Type from 630A 13] It should be possible to offer Bolt-on Type Tap-off Box for 100A & higher ratings to withstand vibration due to crane movement, heavy machines in industries

ix] Testing : 1] The bus duct shall be type tested at a reputed test laboratory (certified by ASTA or ERDA) for the tests as per IEC-61439 Part-1 (Low voltage switchgear & control gear assembly- General rules) & Part 6 (Bus bar trunking systems & bus ways) 2] Short circuit testing of bus duct should be for duration of 1 Sec. Neutral & Earth conductor should also be tested for 60% short circuit rating of phase conductor 3] Degree of ingress protection (IP rating) shall also be tested at any reputed independent laboratory as per IEC-60529 4] Bus duct tested for maximum severe Seismic condition of Zone-5 as per IS 1893-2002 and High Seismic Qualification Level as per IEEE 693-2005. Seismic testing done in severe most combination and orientation (Horizontal + Vertical installation along with Plug-in box in live condition)

A] Supply & fix 415V/690V/1000V Sandwich construction Bus bar trunking system with Multilayer Class-F insulation and; Conductors : Aluminium Rating : 1250A Configuration : 3P4W IP Rating : IP54 Enclosure : GI 1.6mm thickness Impulse Withstand Voltage : 8kV Paint Shade : RAL7032 Epoxy Powder Coating

a) Straight Run Feeder IP54

b) Flange End (fabrication cost only)

c) Horizontal Bend/Vertical Bend (fabrication cost only)

d) Reducer (fabrication cost only) 1250 to 1000 A

e) Plug-in Point (fabrication cost only)

f) Vertical Spring Hanger/Fix hanger (1 No per Floors per Riser)

g) Tinned Copper Braided Flexibles -360mm (with Hardware - Nuts and Bolts)

h) GI Earthing Strip - 25x3 (with Hardware - Nuts and Bolts)

j) Shaft Cantilever angle support with C Channel for Vertical spring or Rigid hangers

k) End feed Panel without switchgear (Suitable for ACB) - Al Bus bar Arrangement

l) Complete with Aluminium bus bar or Cu Flexible with provision for rotary handle mechanism with bottom Cable entry and top Bus duct outgoing provision. 1250 Amp 4P 50kA MDO MTX 1.5G for EFU

B] Supply & fix 415V/690V/1000V Sandwich construction Bus bar trunking system with Multilayer Class-F insulation and; Conductors : Aluminium Rating : 1000A Configuration : 3P4W IP Rating : IP54 Enclosure : GI 1.6mm thickness Impulse Withstand Voltage : 8kV Paint Shade : RAL7032 Epoxy Powder Coating

a) Straight Run Feeder IP54

b) Plug-in Point (fabrication cost only)

c) Vertical Spring Hanger/Fix hanger (1 No per Floors per Riser)

d) Reducer (fabrication cost only) 1000 to 800 A

e) GI Earthing Strip - 25x3 ( with Hardware - Nuts and Bolts )

f) Shaft Cantilever angle support with C Channel for Vertical spring or Rigid hangers

C] Supply & fix 415V/690V/1000V Sandwich construction Bus bar trunking system with Multilayer Class-F insulation and; Conductors : Aluminium Rating : 800A Configuration : 3P4W IP Rating : IP54 Enclosure : GI 1.6mm thickness Impulse Withstand Voltage : 8kV Paint Shade : RAL7032 Epoxy Powder Coating

a) Straight Run Feeder IP54

b) Plug-in Point (fabrication cost only)

c) Vertical Spring Hanger/Fix hanger (1 No per Floors per Riser)

d) End Cover

e) GI Earthing Strip - 25x3 ( with Hardware - Nuts and Bolts )

f) Shaft Cantilever angle support with C Channel for Vertical spring or Rigid hangers

g) Plug-in Box 16A -100A with Mechanical Interlocking suitable for L&T MCCB but without Switchgear (standard size)(Tap off Box on Each Floor)

h) L&T Make 63 Amp 4P 50kA TM MCCB for PIB

j) Tool Kit

Supply, installation, testing and commissioning of free-standing indoor semi-compartmentalised cubical type 120 kVAr APFC CAPACITOR BANK made out of 2.0 mm thick CRCA sheet and built upon rigid framework, having MPP type capacitor with 7% aluminium wound reactor units type tested in accordance with IS 16636 : 2017 with contactor switching, IP 4X protection and including air system provided by axial flow fan or centrifugal fan, control wiring with FR-LSH copper wires complete all as directed by Engineer-in-Charge.

The APFC Capacitor Bank shall comprise of the following : (i) 250 A, 415 V, Ics = Icu = 36 kA, 50 Hz, TP MCCB with adjustable overload settings, adjustable short-circuit settings, adjustable earth - fault settings, current limiting type double break rotor active type, instantaneous protection and microprocessor based trip unit - 01 Nos. (ii) High performance microprocessor based APFC relay with auto/ manual switch option - 01 Nos. (iii) 3-Phase power analyser with in-built digital VAF meter, phase indicating LED lamps (R, Y, B), step indicating LED lamps, ON /OFF push buttons, timer, CT - 500/5 A, Cl1.0, 15 VA - 01 Nos. (iv) MPP capacitor of 120 (3 X 10 + 2 X 20 + 1 X 50) kVAr (v) 10 kVAr - 03 STEPS (a) 40 A, 415, Ics = 100 % Icu = 36 kA, 50 Hz TP MCCB with fixed magnetic settings and adjustable thermal settings - 03 Nos. (b) 3P, 10 kVAr power contactor, 415 V, 50 Hz 230 VAC coil - 03 Nos. (c) 7 % detuned reactor, 3-Ph, 10 kVAr, 440 V, 50 Hz - 03 Nos.

(vi) 20 KVAr - 02 STEPS (a) 50 A, 415, Ics = 100 % Icu + 36 kA, 50 Hz TP MCCB with fixed magnetic settings and adjustable thermal settings - 02 Nos. (b) 3P, 20 kVAr power contactor, 415 V, 50 Hz 230 VAC coil - 02 Nos. (c) 7 % detuned reactor, 3- Ph, 20 kVAr, 440 V, 50 Hz - 02 Nos. (vi) 50 VAr - 01 STEPS (a) 100 A, 415, Ics = 100 % Icu = 36 kA, 50 Hz TP MCCB with fixed magnetic settings and adjustable thermal settings - 01 Nos. (b) 3P, 50 kVAr power contactor, 415 V, 50 Hz 230 VAC coil - 01 Nos. (c) 7% detuned reactor, 3-Ph, 50 kVAr, 440 V, 50 Hz - 01 Nos. NOTES : (i) The Panel shall be completely Ethernet communication ready to communicate with Energy Management System. (ii) The bidder shall furnish dimensional drawings of the items offered, indicating all the fittings, dimensional tolerances, typical GADs etc. with details of insulation at each point and core construction, etc. for approval of the Garrison Engineer. (iii) The bidder shall initiate the Garrison Engineer of the routine tests in accordance with IEC IS 16636 : 2017 in the OEM factory in presence of a representative nominated by the Garrison Engineer before dispatch.

EXTERNAL WATER SUPPLY WATER FEEDING LINE [From Fresh water Pump Room To Service Tank]

S & F GI C-class pipe with hot deep galvanised supports, hot deep galvanised Nut- Bolts , PVC insulated U- Clamps, and all other necessary fittings and accessories also complete two coat of painting complete all as specified and directed by the Engineer-in-Charge.

a) 250 mm dia

b) 200 mm dia (For External Water Supply - 20, For Treated Water Supply - 10)

Supply, Installation, Testing, Commissioning end line strainer for +ve suction of 250 mm dia complete all as specified and directed by Engineer in charge. MAKE: Zoloto HSN code: 84818030 or Techno-commercial equivalent in makes mentioned in Particular Specification.

Supply, Installation, Testing and Commissioning of double flange Ball type NRV of 150 mm dia complete all as specified and directed by engineer in charge. MAKE: Zoloto HSN code: 84813000 or Techno-commercial equivalent in makes mentioned in Particular Specification.

Supplying, Installing, Testing and Commissioning of cast iron double flange butterfly valve of approved make complete all as specified and directed by the Engineer-in-Charge. MAKE: Zoloto HSN code: 84818030 or Techno-commercial equivalent in makes mentioned in Particular Specification.

a) 250 mm dia

b) 200 mm dia (For External Water Supply - 8, For Treated Water Supply - 1)

c) 100 mm dia

M & L for 1.1 kV grade 4.0 core 16 sqmm copper conductor, XLPE insulated armoured cable conforming to IS 7098 (Part 1): 1988, having stranded copper compact shaped conductors as per Cl. 2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanised steel strip/wire and PVC Type ST-2 outer sheath conforming to IS 5831: 1984, including necessary clamping / dressing with cable ties and termination complete all as specified and directed by Engineer-in-Charge.

Pump Panel-1 Supply, installation, commissioning and testing of Panel of suitable size, factory made, CPRI type tested, outdoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. all complete as specified and directed BUSBAR CHAMBER 630 Amps uniformly rated, continuous duty, 415 V AC, 3 Phase and full size Neutral Aluminium (Throughout the length) bus bars with colour coded heat shrink sleeves supported on SMC type grip supports, 25 KA for 1 sec. INCOMING a) 1 nos. 630 amps 4 pole MCCB with TM based release for complete LSIG protections and suitable for 415V, 50 Hz, A.C Supply and having Ics = Icu= 25 KA. The MCCB shall be complete as per technical specifications. b) Three nos. phase indicating light through protected by 2 amps MCB’s. - 1 set, Electronic Digital Load Manager with ready RS485 communication port and MODBUS protocol. - 1 set and 3 nos.

SCADA AUTOMATION OF WATER SUPPLY

Supply, Installation Testing & Commissioning of Indoor type Programmable Logic Controller based Pump and Valve Automation, Protection and communication Panel suitable for control and/or monitoring 08 nos. Pumps, 12 nos. Motorised Valves ( +02 Spare), 08 nos. Solenoid Valves, 08 nos, Pressure Transmitters, 05 nos. Ultrasonic Level Sensor, 32 nos. level switches. The panel should be of suitable size fabricated from 2.0 mm thick CRCA sheet and properly powder coated with angle iron supports not less than 40x40x5mm. The Panel should comprise the following items: (a) Water Level Sensing & Display (b) Pump On/Off (c) Auto priming (d) Operation of Motor Actuated Butterfly Valves (e) Automatic Toggling of Pumps (f) Auto Change Over In Case of Pump Failure (g) Single Phasing Prevention (h) Manual Mode Operation (all connected sub systems including all valves (in pump houses and connected buildings / overhead tanks) and pumps from the PLC based Control Panel. The PLC based Panel shall consist of the following sub systems (i) 02 Nos. Current transducers / energy meters with inbuilt mod bus communication port (Make: RISHABH/ CONZERVE/ ADEPT/ L&T) (ii) 01 No. PLC with following specifications: a). Suitable .Digital inputs/ outputs and analog inputs b). 4 serial ports supporting open communication protocol, 01 No. Ethernet port

Supply, Installation Testing & Commissioning of Indoor type Programmable Logic Controller based Pump and Valve Automation, Protection and communication Panel suitable for control and/or monitoring 20 nos. Motorised Valves (+02 Spare), 40 nos Magnetic Level sensor (10 Nos. Tanks 4 Levels Each Tank). The panel should be of suitable size fabricated from 2.0 mm thick CRCA sheet and properly powder coated with angle iron supports not less than 40x40x5mm. .The Panel should comprise the following items: (a) Water Level Sensing & Display (b) Pump On/Off (c) Auto priming (d) Operation of Motor Actuated Butterfly Valves (e) Automatic Toggling of Pumps (f) Auto Change Over In Case of Pump Failure (g) Single Phasing Prevention (h) Manual Mode Operation (all connected sub systems including all valves (in pump houses and connected buildings / overhead tanks) and pumps from the PLC based Control Panel. The PLC based Panel shall consist of the following sub systems (i) 02 Nos. Current transducers / energy meters with inbuilt mod bus communication port (Make: RISHABH/ CONZERVE/ ADEPT/ L&T) (ii) 01 No. PLC with following specifications; a). Suitable .Digital inputs/ outputs and analog inputs b). 4 serial ports supporting open communication protocol, 01 No. Ethernet port c). Programming software based on IEC to facilitate building of custom built function blocks d). Expandable up to 192 DI / DOs

Supply, Installation, Testing & Commissioning of pressure Transmitter with following specification including necessary power pack for supply of DC :Power supply: 10-36 V DC, Process connection: G ½, “Enclosure: whether proof IP 65, Process temperature: -30 to 120 Celsius, Accuracy: 0.25 % complete all as specified and directed by engineer in charge. (For External Water Supply - 4, For Treated Water Supply - 4)

Supply, Installation, Testing & Commissioning of direct acting type release solenoid valve for air release during priming; with following specifications: Size: 10 mm/15mm Pressure rating: 10 kg / sq. cm. Type: Normally closed (For External Water Supply - 4, For Treated Water Supply - 4)

Supply, Installation, Testing and Commissioning of Float type Point Level Sensor with the following specifications; Type: Magnetic Magnet: Ring type Switch: Reed Switch (Epoxy sealed) Connecting Cable: Teflon (For External Water Supply - 20, For Treated Water Supply - 20)

Supply, Installing, Testing and Commissioning of Ultrasonic Level Transmitter Range : 0-5 meters Accuracy : 0.5 % minimum Supply Voltage : 24V DC Output : 4-20 mA Ultrasonic Frequency:75 kHz burst, rep. rate 96 ms Delay at Power-up: 1.5 seconds Temperature Effect: Uncompensated: 0.2% of distance/°C & Compensated: 0.02% of distance/°C Resolution: 1.0 mm Output Response Time: 100 ms to 2300 ms Minimum Window Size: 20 mm Environmental Rating: Leak proof design is rated IEC IP67; NEMA 6P Operating Conditions: Temperature: –20 °C to 70 °C (–4 °F to 158 °F) Maximum relative humidity: 100% Indicators Green Power On LED: Indicates power is ON. Red Signal LED: Indicates target is within sensing range, and the condition of the received signal Teach/Output indicator (bicolour Amber/Red): Amber – Target is within taught limits; Flashing Amber – Target is outside taught window limits; Red – Sensor is in TEACH mode (For External Water Supply - 3, For Treated Water Supply - 2)

Supply, Installation, Testing & Commissioning of Motor Actuated Butterfly Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 150 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq. cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos. For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater In built blue tooth transceiver with capability of pairing with any android based smart phone to download logged data. Mounting :Direct on valve

Supply, Installation, Testing & Commissioning of Motor Actuated Butterfly Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 100 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq. cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos. For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater In built blue tooth transceiver with capability of pairing with any android based smart phone to download logged data. Mounting :Direct on valve

Supply, Installation, Testing & Commissioning of Motor Actuated Butterfly Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 80 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq. cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos. For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater In built blue tooth transceiver with capability of pairing with any android based smart phone to download logged data. Mounting :Direct on valve

Supply, Installation, Testing & Commissioning of Motor Actuated Butterfly Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 65 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq. cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos. For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater In built blue tooth transceiver with capability of pairing with any android based smart phone to download logged data. Mounting :Direct on valve

Supply & Fixing 2 x 1.5 sq. mm PVC sheathed and PVC insulated, armoured, FRLS, Copper cable multi stranded complete all as specified and directed by engineer in charge. (For External Water Supply - 45, For Treated Water Supply - 45)

Supply & Fixing 4 x 1.5 sq. mm PVC sheathed and PVC insulated, armoured, FRLS, Copper cable complete all as specified and directed by engineer in charge. (For External Water Supply - 325, For Treated Water Supply - 325)

Supply & Fixing 6 x 1.5 sq. mm PVC sheathed and PVC insulated, armoured, FRLS, Copper cable complete all as specified and directed by engineer in charge. (For External Water Supply - 900, For Treated Water Supply - 900)

Supply & Fixing 5 pair 0.5 sq. mm PVC sheathed and PVC insulated, armoured, FRLS, Copper cable complete all as specified and directed by engineer in charge. (For External Water Supply - 250, For Treated Water Supply - 250)

Supply & Fixing 6F Single mode Optical Fibre cable to be pulled over head and duly fastened/attached to a messenger wire or a stay wire of gauge either with the required clamps of suitable size not more than 3 feet apart or with a web between the OFC and messenger wire suitable capacity and length along with endplates at both ends of the suspended cable i) 6F Single mode OFC suitable for outdoor networking applications (1) 6 Fibres type single mode, wavelength 1310, Attenuation 0.38/km (2) Outer jacket of HDPE sheath if required (3) Jelly Field Core (4) Wrapped with Corrugated Steel Tape (5) Armoured with a pair of Steel Wire for rigidity (6) Anti Termite and rodent repellent (7) Water Proof and moisture resistant with proper splicing to panels.

BLANK

S & F 150 mm dia. socket and spigot ends ductile iron pipe, "K9 Class" ISI marked with rubber type gasket joint (tyton joint best quality ISI mark) complete all as specified and directed by Engineer-in-Charge. (Fresh Water - 100, Treated Water - 1000)

M & L for insertion of CI/DI lSI marked tee 150x150x150mm bore for tapping including cutting in position existing CI/DI main pipe line of size 150 mm dia. complete all as specified and directed by Engineer-in-Charge. (Fresh Water - 1, Treated Water - 1)

M&L for construction of brick masonry valve chamber in repair of size 1200mm x 1200mm x 1000mm (internal dimension) above ground level 30 mm with PCC foundation using PCC 1:4:8 type D-2 using 40 mm graded stone aggregate over 15 cm thick hardcore, 23 cm thick brick wall built in cement and sand mortar 1:4, 15 cm thick internal and external plaster including top floor in cement and sand mortar 1:3, finished even and smooth, without using extra cement, 10 mm thick mild steel plate cover on 50 mm x 50 mm x 6 mm MS angle iron frame embedded in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) coping having rectangular hinged opening of size with locking arrangement & handle made out of 25 cm dia MS round bar, hold fast etc, applying one coat of red oxide primer and two coats of synthetic enamelled paint to all steel surfaces and earth work in any type of soil including disposal of surplus soil to a distance not exc. 50 mtr complete all as specified and directed by engineer in charge. (Fresh Water - 2, Treated Water - 2)

M&L for shifting and refixing of 02 Nos existing Pumps of capacity upto 15 HP and 01 Nos of existing pump panel and accessories complete all as specified and directed.

M&L for construction of brick masonry valve chamber in repair of size 0.9m x 0.9m x 1.0 mtr (internal dimension) above ground level 30 mm suitable for any size motor butterfly valve/ sluice valve, 15 cm thick foundation using PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) over 15 cm thick hardcore, 23 cm thick brick wall built in cement and sand mortar 1:4, 15 cm thick internal and external plaster including top floor in cement and sand mortar 1:3, finished even and smooth, without using extra cement, 10 mm thick mild steel plate cover on 50 mm x 50 mm x 6 mm MS angle iron frame embedded in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) coping having rectangular hinged opening of size with locking arrangement & handle made out of 25 cm dia MS round bar, hold fast etc, applying one coat of red oxide primer and two coats of synthetic enamelled paint to all steel surfaces and earth work in any type of soil including disposal of surplus soil to a distance not exc. 50 mtr complete all as specified and directed by engineer in charge.

TREATED WATER SUPPLY WATER FEEDING LINE [From Treated water Pump Room To Service Tank]

Supply, Installation, Testing, Commissioning end line strainer for +ve suction of 200 mm dia complete all as specified and directed by engineer in charge. MAKE: Zoloto HSN code: 84818030 or Techno-commercial equivalent in makes mentioned in Particular Specification.

Supplying, Installing, Testing and Commissioning of cast iron double flange butterfly valve of approved make complete all as specified and directed by the Engineer-in-Charge. MAKE: Zoloto HSN code:84818030 or Techno-commercial equivalent in makes mentioned in Particular Specification.

a) 150 mm dia

b) 80 mm dia

Supply, Installation, Testing and Commissioning of double flange Ball type NRV of 100 mm dia complete all as specified and directed by engineer in charge. MAKE: Zoloto HSN code:84813000 or Techno-commercial equivalent in makes mentioned in Particular Specification.

Pump Panel-2 Supply, installation, commissioning and testing of Panel of suitable size, factory made, CPRI type tested, outdoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. all complete as specified and directed BUSBAR CHAMBER 150 Amps uniformly rated, continuous duty, 415 V AC, 3 Phase and full size Neutral Aluminium (Throughout the length) bus bars with colour coded heat shrink sleeves supported on SMC type grip supports, 25 KA for 1 sec. INCOMING a) 1 nos. 150 amps 4 pole MCCB with TM based release for complete LSIG protections and suitable for 415V, 50 Hz, A.C Supply and having Ics = Icu= 25 KA. The MCCB shall be complete as per technical specifications. b) Three nos. phase indicating light through protected by 2 amps MCB’s. - 1 set, Electronic Digital Load Manager with ready RS485 communication port and MODBUS protocol. - 1 set and 3 nos.

M & L for 1.1 kV grade 4.0 core 10 sqmm copper conductor, XLPE insulated armoured cable conforming to IS 7098 (Part 1): 1988, having stranded copper compact shaped conductors as per Cl. 2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanised steel strip/wire and PVC Type ST-2 outer sheath conforming to IS 5831: 1984, including necessary clamping / dressing with cable ties and termination complete all as specified and directed by Engineer-in-Charge.

BLANK

BLANK

S&F cast iron Air valves with single air outlet, conforming to IS 14845 of size 50mm dia. bore and fixing in DI water supply mains of 150 mm dia. complete all as specified and directed by Engineer-in-Charge.

FIRE FIGHTING

HYDRANT SYSTEM

Supplying, Installing, Testing and Commissioning of cast iron double flange butterfly valve of approved make complete as specified and directed by the Engineer-in-Charge. MAKE: Zoloto HSN code: 84818030 or Techno-commercial equivalent in makes mentioned in Particular Specification.

(a) 250 mm dia

(b) 200 mm dia

(c)150 mm dia

(d) 100 mm dia

(e)80 mm dia

(f) 50 mm dia

Supply, Installation, Testing and Commissioning of cast iron double flange Ball type NRV complete as specified and directed by the Engineer-in-Charge. MAKE: Zoloto HSN code: 84813000 or Techno-commercial equivalent in makes mentioned in Particular Specification.

(a) 200 mm dia

(b) 150 mm dia

(c)100 mm dia

(d) 80 mm dia

M & L for PN 1.6 rated CI 'Y' -type strainer for suction conforming to IS: 907- 1984 with SS filter screen and flange drilling standard end connection conforming to IS: 1538- 1993 and necessary accessories for suction side of fire pumps all complete as specified and directed by the Engineer-in-Charge. MAKE: Zoloto HSN code: 84818030 or Techno-commercial equivalent in makes mentioned in Particular Specification.

(a) 250 mm dia

(b) 100 mm dia

(c)80 mm dia

S&F 100mm Dia Bronze Compact Pressure Reducing Valve (Screwed) complete all as specified and directed by the Engineer-in-Charge. MAKE: Zoloto HSN code: 84811000 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F of orifice plate made out of 6 mm thick SS 304 with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 FM approved and UL listed complete all as specified and directed by the Engineer-in-Charge.

Supply and fix branch pipe with nozzle of 20 mm dia gun metal for hose reel conforming to IS 8090 complete all as specified and directed by the Engineer-in-Charge.

Supply and fix Automatic air release valve 50mm dia suitable for domestic water with 50mm gun metal stop valve complete all as specified and directed by the Engineer-in-Charge. (For Hydrant System - 6, For Sprinkler System - 3)

M & L for 1.1 kV grade copper conductor, XLPE insulated armoured cable conforming to IS 7098 (Part 1): 1988, having stranded copper compact shaped conductors as per Cl. 2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanised steel strip/wire and PVC Type ST-2 outer sheath conforming to IS 5831: 1984, including necessary clamping / dressing with cable ties and termination complete all as specified and directed by Engineer-in-Charge.

(a) 4CX16 SQ.MM. CU ARM.XLPE CABLE

(b) 4CX10 SQ.MM. CU ARM.XLPE CABLE

SPRINKLER SYSTEM

Supplying, Installing, Testing and Commissioning of cast iron double flange butterfly valve of approved make complete all as specified and directed by the Engineer-in-Charge. MAKE: Zoloto HSN code: 84818030 or Techno-commercial equivalent in makes mentioned in Particular Specification.

(a) 100 mm dia

(b) 150 mm dia

FIRE PUMPS

I. Ground Floor Pumps a. High pressure zone Pumps

BLANK

BLANK

b. Low pressure zone Pumps

BLANK

BLANK

Supply, Installation, Testing & Commissioning of Non-clog wet pit submersible pump with motor having 200 LPM capacity @ 2.0 kg/cm2 total discharge pressure. (1W +1S) and automatic float control arrangement complete with delivery gate & check valve, control panel, anti vibrator etc. complete all as specified and directed by Engineer-in-Charge. (Pump room sump pump-Dewatering pump)

II. Service Floor Pumps

BLANK

BLANK

CONTROL PANEL FOR FIRE PUMPS

Fire Pump Panel-1 Supply, installation, commissioning and testing of Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 75 mm x 75 mm x 6 mm, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. all complete as specified and directed BUSBAR CHAMBER 1250 Amps uniformly rated, continuous duty, 415 V AC, 3 Phase and full size Neutral Aluminium (Throughout the length) bus bars with colour coded heat shrink sleeves supported on SMC type grip supports, 50 KA for 1 sec. INCOMING a) 1 no. 1250 A, 4 pole ACB with TM based release for complete LSIG protections and suitable for 415V, 50 Hz, A.C Supply and having Ics = Icu= 50 KA. The ACB shall be complete as per technical specifications. b) Three nos. phase indicating light through protected by 2 amps MCB’s. - 1 set, Electronic Digital Load Manager with ready RS485 communication port and MODBUS protocol. - 1 set and 3 nos.

Fire Pump Panel-2 Supply, installation, commissioning and testing of Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 75 mm x75 mm x 6 mm, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. all complete as specified and directed BUSBAR CHAMBER 400 Amps uniformly rated, continuous duty, 415 V AC, 3 Phase and full size Neutral Aluminium (Throughout the length) bus bars with colour coded heat shrink sleeves supported on SMC type grip supports, 50 KA for 1 sec. INCOMING a) 1 nos. 400 amps 4 pole MCCB with TM based release for complete LSIG protections and suitable for 415V, 50 Hz, A.C Supply and having Ics = Icu= 25 KA. The MCCB shall be complete as per technical specifications. b) Three nos. phase indicating light through protected by 2 amps MCB’s. - 1 set, Electronic Digital Load Manager with ready RS485 communication port and MODBUS protocol. - 1 set and 3 nos.

Supply, installation, testing and commissioning of Emergency Start / Stop Push Button station weather proof type for Booster pump at terrace level including earthing with 12 HP Star-Delta starter complete all as specified and directed by the Engineer-in-Charge.

FIRE ALARM & PUBLIC ADDRESS FAVA SYSTEM

Supply, installation, testing & commissioning of Microprocessor based 10-loop panel, True Peer-to-Peer Networkable Addressable Integrated Main Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 event plus 1000 alarm log history events, QWERTY keypad for programming. The panel shall have degrade mode. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop. Each loop shall have a capacity of minimum 300 analog addressable devices. The panel shall work in degrade mode in case of CPU failure. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition. The panel shall be complete with Integrated 8 channel Digital Voice Evacuation System Controller capable of broadcasting Evacuation Messages on same peer-to-peer Network and Fire Fighters Telephone TWO way Communication System capable of supervising all the speaker circuits with adequate zone control and accessories. Failure of fire alarm CPU shall not result in failure of voice alarm controller complete all as specified and directed by the Engineer-in-Charge. Note: The fire alarm panel shall be serviceable by any system integrator Approvals : UL listed & FM Approved

Supply, installation, testing & commissioning of Microprocessor based 10-loop panel, True Peer-to-Peer Networkable Addressable Sub Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 event plus 1000 alarm log history events, QWERTY keypad for programming. The panel shall have degrade mode. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop. Each loop shall have a capacity of minimum 300 analog addressable devices. The panel shall work in degrade mode in case of CPU failure. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition complete all as specified and directed by the Engineer-in-Charge. Note: The fire alarm panel shall be serviceable by any system integrator Approvals : UL listed & FM Approved

Supply, installation, testing & commissioning of Network Repeater Panel with minimum 8 inch touch screen display with control keypad complete all as specified and directed by the Engineer-in-Charge.

Supply, installation, testing & commissioning of Gas leak Detector in Kitchen with necessary power supply complete all as specified and directed by the Engineer-in-Charge.

Supply, installation, testing & commissioning of Addressable Relay Module for Third Party Outputs. The relay module shall provide DPDT contact rated at 24V DC, 2A at resistive load. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance complete all as specified and directed by the Engineer-in-Charge.

Supply, installation, testing & commissioning of Addressable Monitor Module for Third Party Inputs. The monitor module shall monitor potential free contacts. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance complete all as specified and directed by the Engineer-in-Charge.

Supply, installation, testing & commissioning of Isolator Module for Isolating short / dewired / loose circuits with automatic resetting arrangement. Isolator Base can also be proposed, however in that case needs to be considered with each detector & module. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance complete all as specified and directed by the Engineer-in-Charge.

Supply, installation, testing & commissioning of 24VDC power supply unit for sounder cum strobes. The unit shall have in built battery charger & sufficient back of 24 hours in stand by & 30 mins in alarm condition. The power supply unit shall be monitored by fire alarm panel complete all as specified and directed by the Engineer-in-Charge.

Supply, installation, testing & commissioning of Addressable Fire Fighter's Telephone Jack with suitable interface module for two way communication between Remote Fire Fighter & Fire Command Center complete all as specified and directed by the Engineer-in-Charge.

Supply, installation, testing & commissioning of Fire Fighter's Telephone Handset for two way communication between Remote Fire Fighter & Fire Command Center complete all as specified and directed by the Engineer-in-Charge.

M & L for low smoke zero halogen (LSOH) flame retardant fire alarm cable, 2 core, 1.5 sqmm conforming to BS 7629-1, BS 6387 & BS EN 50200 and rated for 500V, having plain annealed stranded copper conductor with primary insulation tape and secondary insulation of high performance silicone rubber, earth/drawn electrostatic screen of aluminium fire barrier and type LTS3 outer sheath conforming to BS 7655 suitable for operating temperature range -30°C to 70°C and minimum bending radius being 6 times the overall diameter, RED in colour, including laying termination and ferruling complete all as specified and directed by Engineer-in-Charge.

VOICE ALARM SYSTEM EQUIPMENT

Supply, installation, testing & commissioning of UL Listed Digital Audio Amplifier capable of processing of 8 class B speaker line output and total of 300 W at 70.7 VRMS output along with necessary enclosures. The Digital Audio Amplifier shall be fully monitored for fault and alarm reporting complete all as specified and directed by the Engineer-in-Charge. "In case of fire a pre-recorded shall be broadcast on affected floor, one floor below & two floors above the affected floor"

Supply, installation, testing & commissioning of 240W power Amplifier for high power speakers. The sufficient size of PA rack shall be considered to mount power amplifiers complete all as specified and directed by the Engineer-in-Charge.

Supply, Installation, Testing and Commissioning of UL Listed 2W Multi-Tap (0.25W; 0.5W; 1W; 2W), Ceiling Mount Speakers. The speakers shall be of same make as that of the Control Panel & Amplifiers. They shall be compatible with supplied Amplifiers and shall work on 70.7Vrms complete all as specified and directed by Engineer-in-Charge.

Supply, Installation, Testing and Commissioning of 10W Multi-Tap (5W; 10W), Wall Mount speakers. The speaker shall be compatible with supplied Amplifiers and shall work on 70.7Vrms complete all as specified and directed by Engineer-in-Charge.

S & F PA Rack for Power Amplifiers complete all as specified and directed by the Engineer-in-Charge. Note: Contractor shall furnish the size of rack as per amplifier qty.

BLANK

PRESSURIZATION SYSTEM

1. Pump Room Ventilation

Supply, fabrication, installation and testing of Axial Flow fans with properly supported on MS structure necessary spring isolators with squirrel cage TEFC, 415± 10% volts, 50 cycles, 3 phase AC power supply, IP55, S1 duty, IS325, class F insulation direct driven motor, Fans shall be safely stored an made lifting, shifting, assembly, making necessary arrangement for mounting. Star delta starter panel with on off push button, on/off/trip indicators, manual reset overload relays, armoured cabling with proper tray supports from starter panel to fan motor Starter panel should be provided with auto manual toggle switch & facility to operate on remote signal. Necessary earthing, smoke & fire detector providing signal to starter panel, related control cabling shall be part of starter panel as approved by consultants & clients and complete all as specified and directed by the Engineer-in-Charge.

(a) Fresh Air Fan 7500 CFM @ 40 MMWG

(b) Exhaust Air Fan 10000 CFM @ 40 MMWG

Supply, installation and testing of GI Ducting complete all as specified and directed by the Engineer-in-Charge.

(a) 22 Gauge (For Pump Room Ventilation - 200, For Staircase Pressurization - 800, For Lift well Pressurization - 300)

(b) 24 Gauge (For Pump Room Ventilation - 150, For Staircase Pressurization - 400, For Lift well Pressurization - 150)

Supply, fabrication, installation and testing the flexible connections constructed of fire resistant resin double sleeve as per the approved shop drawings complete all as specified and directed by the Engineer-in-Charge. (For Pump Room Ventilation - 4, For Staircase Pressurization - 8, For Lift well Pressurization - 6)

Supply, Fabrication and Installation of GI Bird screen at Fan Inlet as per approved drawing complete all as specified and directed by the Engineer-in-Charge. (For Pump Room Ventilation - 2, For Staircase Pressurization - 8, For Lift well Pressurization - 6)

Supply and Installation of powder coated grill with damper as per approved drawing complete all as specified and directed by the Engineer-in-Charge. (For Pump Room Ventilation - 4.5, For Staircase Pressurization - 12, For Lift well Pressurization - 3)

BLANK

Supply, fabrication, installation and testing of Isolator Box near Fan complete all as specified and directed by the Engineer-in-Charge.

Supply, fabrication, installation and testing of Electrical Power Cable for Fan,3C x 4 Sq mm Copper Armoured Cable complete all as specified and directed by the Engineer-in-Charge. (For Pump Room Ventilation - 120, For Staircase Pressurization - 450, For Lift well Pressurization - 325)

M & L for MS Fabrication Work for Fan and Duct support complete all as specified and directed by the Engineer-in-Charge. (For Pump Room Ventilation - 350, For Staircase Pressurization - 4500, For Lift well Pressurization - 4500)

2. Staircase Pressurization

Supply, fabrication, installation and testing of Axial Flow fans with properly supported on MS structure necessary spring isolators with squirrel cage TEFC, 415± 10% volts, 50 cycles, 3 phase AC power supply, IP55, S1 duty, IS325, class F insulation direct driven motor, Fans shall be safely stored an made lifting, shifting, assembly, making necessary arrangement for mounting. Star delta starter panel with on off push button, on/off/trip indicators, manual reset overload relays, armoured cabling with proper tray supports from starter panel to fan motor Starter panel should be provided with auto manual toggle switch & facility to operate on remote signal. Necessary earthing, smoke & fire detector providing signal to starter panel, related control cabling shall be part of starter panel as approved by consultants & clients and complete all as specified and directed by the Engineer-in-Charge.

(a) 13400 CFM @ 50 MMWG

(b) 10700 CFM @ 50 MMWG

BLANK

Supply, fabrication, installation and testing of Isolator Box near Fan complete all as specified and directed by the Engineer-in-Charge.

3. Lift well Pressurization

Supply, fabrication, installation and testing of Axial Flow fans of 17000 CFM @ 50 MMWG with properly supported on MS structure necessary spring isolators with squirrel cage TEFC, 415± 10% volts, 50 cycles, 3 phase AC power supply, IP55, S1 duty, IS325, class F insulation direct driven motor, Fans shall be safely stored an made lifting, shifting, assembly, making necessary arrangement for mounting. Star delta starter panel with on off push button, on/off/trip indicators, manual reset overload relays, armoured cabling with proper tray supports from starter panel to fan motor Starter panel should be provided with auto manual toggle switch & facility to operate on remote signal. Necessary earthing, smoke & fire detector providing signal to starter panel, related control cabling shall be part of starter panel as approved by consultants & clients and complete all as specified and directed by the Engineer-in-Charge.

BLANK

Supply, fabrication, installation and testing of Isolator Box near Fan complete all as specified and directed by the Engineer-in-Charge.

Supply & fix Fire Extinguisher Dry Chemical Powder (ABC) type 6 kg capacity : (IS 15683) complete all as specified and directed by the Engineer-in-Charge.

Supply & fix Fire Extinguisher CO2 type - 4.5 kg capacity light weight, squeeze grip type : (IS 15683) complete all as specified and directed by the Engineer-in-Charge.

Supply & fix Fire Extinguisher Mechanical Foam (AFFF) type - 9 Litres capacity : (IS 15683) complete all as specified and directed by the Engineer-in-Charge.

LIFTS

Design, Fabrication, Supply, Installation, Testing & Commissioning of following Electric Traction Type fully automatic Machine room Elevator with Closed loop AC variable voltage & variable frequency drive unit suitable for operation on 415V, 3 Phase, 50 Hz. AC supply, having speed of 4.0 m/sec., power operated centre opening type car & landing doors, electro-magnetic brake system, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, emergency light, intercom suitable for hook up to building EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fire man's switch at Main Landing floor and secondary recall floor, digital car position indicator in car, Hall lanterns with Up & Down indication at all floors, light fixtures, ventilation fan, landing sill, main beam in Machine Room for machine mounting, pit ladder etc. complete with all accessories and with Automatic Rescue Device (ARD) complete with dry maintenance free sealed batteries as required etc., and as under: - Elevator No. : A to F (1 to 6) Capacity - 20 passengers (1360 Kgs) Speed - 4.0 m/sec Rise - 199.20 m (Approx.) No. of stops - 63 No. of regular openings - 62 (Floor - G,1~54,56~62) No. of controlled openings - 1 (Floor - 55) Shaft size - 2400 mm x 2700 mm (W x D) Car size - As per IS/NBC (Tentative Car size: 1700 mm W x 1800 mm D) Car Interior - Stainless Steel Hairline Finish (Grade 304) with minimum panel thickness of 1.5 mm

Hand rail- SS mirror finish on rear & side wall of suitable size & length as per OEM recommendation Mirror- Suitable size as per OEM recommendation Car Ceiling- CD 41 - SS hairline finish, with LED ceiling light fitting as per OEM recommendation. Pit depth - 5500mm (Approx.) Overhead - 8600mm (Approx.) Door Size: 1000 mm (Wide) x 2400 mm (High) Car Doors: Automatic Power operated, 2-Panel centre opening horizontal sliding Stainless Steel Hair line finish (Grade 304), minimum panel thickness -1.5 mm Landing doors : 2-Panel centre opening horizontal sliding Stainless Steel Hair line finish (Grade 304), minimum panel thickness - 1.5 mm Operation - Full Destination Control System with / without attendant, group operation control for Six (06) lifts. ARD for emergency operation Hall Lanterns with Gong for all landings in Lobby Car Position indicator over Car door / at a suitable height on Front return panel Destination Control Keypad (Input terminals) - 04 on All floors Hidden Car operating panel for Fire Emergency and Attendant Operation 25 mm Recess for Flooring by Others and Floor weight provision Registered Call Display indicators on Car Door Columns 3-Way Built-in Intercom Facility suitable to hook up with building EPABX Software integration (with BMS & FAS System) Handrails on all sides. Ceiling interior and light fixture shall be in scope of vendor Multi beam Full height Infra Red protection for Door Opening & Closing On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE.

Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. Controller: Closed Loop A.C. variable voltage & variable frequency with harmonic arrestors to limit Total Harmonic Distortion below 5% Power- 415 V, 3 phase, 50 Hz, 4 wires system. Narrow Door frames of same finish as Landing doors on each landing Should have regenerative drives to save electricity Note: Additional load of 300kg shall be considered for Interior Designing. Operation / Grouping: Destination Control System (Full) Other General Requirements Battery operated Emergency Light, Fan and Alarm Bell Audio & Visual Indication inside Car for Overload, ARD operation and Fireman operation Fireman Switch in Ground Floor and Secondary Recall Floor Automatic rescue device suitable to operate for minimum 03 times without recharging (Access Hatch on Car top and False ceiling to be consider for each lift for emergency rescue) All Landing doors to have 01 Hour Fire resistance rating. Oil buffers, Adjustable Roller guides, Cast Iron Filler weights for Counterweight, Solid 'T' Section machined Guide rails for Car & Counterweight

Ascending Car Over speed protection (ACOP) and Uncontrolled Car movement protection (UCMP) Earthquake operation with Primary and Secondary wave seismic sensors Retainers for cables, suspension ropes, counterweights and other moving parts to prevent displacement and entanglement with elevator parts inside hoist way in case of building sway and earthquake. Door nudging operation, Next landing operation, No Correction run function Auxiliary controller for Destination control system Braille symbols on buttons and special button on Destination Keypad for voice guidance for use by specially abled users Car Door mechanical interlock Cable provision for CCTV and PA system In case of controlled openings, Car buttons & DCS keypads shall be operational under key operation, attendant operation and / or under fireman's operation Minimum 02 Blowers in Car to ensure 20 air changes per hour, with auto switch off if no call is made for 90 seconds. Self Levelling - ±5 mm , Stopping Accuracy - ±5 mm Elevator ceiling height – min. 2600mm. (Clear Car Internal height below False Ceiling) Adequate design of car required for reducing noise level and vibration due to piston effect (such as aerodynamic car, double isolation, etc.) One elevator in the Group to be designated as Fireman Elevator Steel channels for mounting Rail brackets and Wire Grills inside shaft Initial inspection by lift manufacture. Passenger Elevator as described above.

Design, Fabrication, Supply, Installation, Testing & Commissioning of following Electric Traction Type fully automatic Machine room Elevator with Closed loop AC variable voltage & variable frequency drive unit suitable for operation on 415V, 3 Phase, 50 Hz. AC supply, having speed of 4.0 m/sec., power operated centre opening type car & landing doors, electro-magnetic brake system, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, emergency light, intercom suitable for hook up to building EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fire man's switch at Main Landing floor and secondary recall floor (if specified), digital car position indicator in car & at all floors with up / down direction, light fixtures, ventilation fan, landing sill, main beam in Machine Room for machine mounting, pit ladder etc. complete with all accessories and with Automatic Rescue Device (ARD) complete with dry maintenance free sealed batteries as required etc., and as under: - Elevator No. : SL-1 Capacity - 20 passengers (1360 Kgs) Speed - 4.0 m/sec Rise - 199.20 m (Approx.) No. of stops - 63 No. of regular openings - 62 (Floor - G,1~54,56~62) No. of controlled openings - 1 (Floor - 55) Shaft size - 2400 mm x 2700 mm (W x D) Car size - As per IS/NBC (Tentative Car size: 1500 mm W x 2100 mm D) Car Interior - Stainless Steel Hairline Finish (Grade 304) with minimum panel thickness of 1.5 mm

Hand rail- SS mirror finish on rear & side wall of suitable size & length as per OEM recommendation Mirror- Suitable size as per OEM recommendation Car Ceiling- CD 41 - SS hairline finish, with LED ceiling light fitting as per OEM recommendation. Overhead - 8600mm (Approx.) Door Size: 1200 mm (Wide) x 2400 mm (High) Car Doors: Automatic Power operated, 2-Panel Telescopic opening horizontal sliding Stainless Steel Hair line finish (Grade 304), minimum panel thickness-1.5 mm Landing doors : 2-Panel Telescopic opening horizontal sliding Stainless Steel Hair line finish (Grade 304), minimum panel thickness-1.5 mm Operation - Microprocessor based single automatic push button / Duplex full collective control with / without attendant in group control for two elevators. ARD for emergency operation Gong for all landings in Lobby Car Position indicator over Car door / at a suitable height on Front return panel Hall buttons on all landings Car operating panel - 01 No. inside Car 25 mm Recess for Flooring by Others and Floor weight provision 3-Way Built-in Intercom Facility suitable to hook up with building EPABX Software integration (with BMS & FAS System) Handrails on all sides. Ceiling interior and light fixture shall be in scope of vendor Multi beam Full height Infra Red protection for Door Opening & Closing On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE

Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. Controller: Closed Loop A.C. variable voltage & variable frequency with harmonic arrestors to limit Total Harmonic Distortion below 5% Power- 415 V, 3 phase, 50 Hz, 4 wires system. Narrow Door frames of same finish as Landing doors on each landing Should have regenerative drives to save electricity Note: Additional load of 300kg shall be considered for Interior Designing. Operation / Grouping: Full Collective- Duplex with Service Lift SL-2 Other General Requirements Battery operated Emergency Light, Fan and Alarm Bell Audio & Visual Indication inside Car for Overload, ARD operation and Fireman operation Fireman Switch in Ground Floor and Secondary Recall Floor (if specified) Automatic rescue device suitable to operate for minimum 03 times without recharging (Access Hatch on Car top and False ceiling to be consider for each lift for emergency rescue) All Landing doors to have 01 Hour Fire resistance rating. Oil buffers, Adjustable Roller guides, Cast Iron Filler weights for Counterweight, Solid 'T' Section machined Guide rails for all lifts

Ascending Car Over speed protection (ACOP) and Uncontrolled Car movement protection (UCMP) Earthquake operation with Primary and Secondary wave seismic sensors Retainers for cables, suspension ropes, counterweights and other moving parts to prevent displacement and entanglement with elevator parts inside hoist way in case of building sway and earthquake. Door nudging operation, Next landing operation, No Correction run function, Anti-nuisance feature, Car Call Cancellation feature Braille symbols on car and landing buttons Car Door mechanical interlock Cable provision for CCTV and PA system In case of controlled openings, Car & Hall Buttons shall be operational under key operation, attendant operation and / or under fireman's operation Minimum 02 Blowers in Car to ensure 20 air changes per hour, with auto switch off if no call is made for 90 seconds. Self Levelling - ±5 mm , Stopping Accuracy - ±5 mm Elevator ceiling height – min. 2600mm. (Clear Car Internal height below False Ceiling) Adequate design of car required for reducing noise level and vibration due to piston effect (such as aerodynamic car, double isolation, etc.) One elevator in the Group to be designated as Fireman Elevator Steel channels mounting Rail brackets and Wire Grills inside shaft Initial inspection by lift manufacture. Service Elevator as described above.

Blank

Blank

Blank

Blank

Design, Fabrication, Supply, Installation, Testing & Commissioning of following Electric Traction Type fully automatic Machine room Elevator with Closed loop AC variable voltage & variable frequency drive unit suitable for operation on 415V, 3 Phase, 50 Hz. AC supply, having speed of 4.0 m/sec., power operated centre opening type car & landing doors, electro-magnetic brake system, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, emergency light, intercom suitable for hook up to building EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fire man's switch at Main Landing floor and secondary recall floor (if specified), digital car position indicator in car & at all floors with up / down direction, light fixtures, ventilation fan, landing sill, main beam in Machine Room for machine mounting, pit ladder etc. complete with all accessories and with Automatic Rescue Device (ARD) complete with dry maintenance free sealed batteries as required etc., and as under: - Elevator No. : FL-1 Capacity - 20 passengers (1360 Kgs) Speed - 4.0 m/sec Rise - 199.20 m (Approx.) No. of stops - 63 No. of regular openings - 62 (Floor - G,1~54,56~62) No. of controlled openings - 1 (Floor - 55) Shaft size - 2650 mm x 2700 mm (W x D) Car size - As per IS/NBC (Tentative Car size: 1500 mm W x 2100 mm D) Car Interior - Stainless Steel Hairline Finish (Grade 304) Flooring - 6 mm Thick Stainless Steel Chequered Plate Pit depth - 5500mm (Approx.)

Hand rail- SS mirror finish on rear & side wall of suitable size & length as per OEM recommendation Mirror- Suitable size as per OEM recommendation Car Ceiling- CD 41 - SS hairline finish, with LED ceiling light fitting as per OEM recommendation. Overhead - 8600mm (Approx.) Door Size: 1100 mm (Wide) x 2400 mm (High) Car Doors: Automatic Power operated, 2-Panel Center opening horizontal sliding Stainless Steel Hair line finish (Grade 304), minimum panel thickness - 1.5 mm Landing doors : 2-Panel Center opening horizontal sliding Stainless Steel Hair line finish (Grade 304) on Ground Floor and MS Painted Finish on all other floors, minimum panel thickness - 1.5 mm Operation - Microprocessor based single automatic push button / Simplex full collective control with / without attendant ARD for emergency operation Gong for all landings in Lobby Car Position indicator over Car door / at a suitable height on Front return panel Hall buttons on all landings Car operating panel - 01 No. inside Car 3-Way Built-in Intercom Facility suitable to hook up with building EPABX Software integration (with BMS & FAS System) Ceiling interior and light fixture shall be in scope of vendor Full height Infra Red protection for Door Opening & Closing

Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. Controller: Closed Loop A.C. variable voltage & variable frequency with harmonic arrestors to limit Total Harmonic Distortion below 5% Power- 415 V, 3 phase, 50 Hz, 4 wires system. Narrow Door frames of same finish as Landing doors on each landing Should have regenerative drives to save electricity Note: Operation / Grouping: Full Collective- Simplex Other General Requirements Battery operated Emergency Light, Fan and Alarm Bell Audio & Visual Indication inside Car for Overload, ARD operation and Fireman operation\ Fireman Switch in Ground Floor and Secondary Recall Floor (if specified) Automatic rescue device suitable to operate for minimum 03 times without recharging (Access Hatch on Car top and False ceiling to be consider for each lift for emergency rescue) All Landing doors to have 01 Hour Fire resistance rating. Oil buffers, Adjustable Roller guides, Cast Iron Filler weights for Counterweight, Solid 'T' Section machined Guide rails for all lifts

Ascending Car Over speed protection (ACOP) and Uncontrolled Car movement protection (UCMP) Earthquake operation with Primary and Secondary wave seismic sensors Retainers for cables, suspension ropes, counterweights and other moving parts to prevent displacement and entanglement with elevator parts inside hoist way in case of building sway and earthquake. Door nudging operation, Next landing operation, No Correction run function, Anti-nuisance feature, Car Call Cancellation feature Braille symbols on car and landing buttons Car Door mechanical interlock Cable provision for CCTV and PA system In case of controlled openings, Car & Hall Buttons shall be operational under key operation, attendant operation and / or under fireman's operation Minimum 02 Blowers in Car to ensure 20 air changes per hour, with auto switch off if no call is made for 90 seconds. Self Levelling - ±5 mm , Stopping Accuracy - ±5 mm Elevator ceiling height – min. 2600mm. (Clear Car Internal height below False Ceiling) Adequate design of car required for reducing noise level and vibration due to piston effect (such as aerodynamic car, double isolation, etc.) Initial inspection by lift manufacture. Fire Elevator as described above.

ORGANIC WASTE CONVERTER

Supply, Installation, Testing & Commissioning of Waste Collection System complete all as specified and as directed by Engr-in-Charge as follows:

a) Fabrication, supplying and installation of 90 min fire rated (UL label 10B) type of gravity chutes system having robust construction independent for dry and wet waste of minimum Ø 600 MM with lntake Hoppers at every floor level for the subject project as per BS 1703:2005 and NFPA. The gravity Chutes shall be made up of acceptable material as per codes and most importantly look upon the safety issue in buildings. It should be 1.2 mm thick stainless Steel SS 430 with Chute doors on each floor of size as per OEM recommendations suitable to withstand for 90 min in case of fire (inside or outside the Chute). It should be provided with a usable link at lower end fire rated door fitted on roller. In case of fire, in the garbage room, the link will fuse & the roller will slide the door & will lock & will not allow the entry of fire in the chute. Garbage Chute should be "Dry" & "Wet" garbage separate collection. The chutes shall be provided with Structural steel frames for Floor level supports and suitable number of Fire Fighting Sprinklers at every Ievel shall be provided for keeping discharge constant irrespective of changing inlet pressure as per building height and strictly as per OEM. The System shall be provided with pre-assembled Cleaning Brush so designed to clean vertical cylindrical height of garbage chute installed at the top of the chute. This shall be operated by control panel provided above the topmost intake of the chute. A stiff nylon brush shall be automatically lowered and raised in the chute to by using electric motor. Hard bristles of specially designed brush scraps and cleans internal surface of chute should be there. It should have the arrangement of spraying of water from the top with detergent from top during cleaning. Nylon brush shall have wetted parts which shall be made of stainless steel. High strength galvanized 5 mm Ø steel wire rope shall be used for longevity. It shall also be provided with Start position sensors. Overshooting position sensors should be there for uppermost as well as lowermost position. In case of over travel of brush either at lower or uppermost position, systems trip the working .The electrical panel shall be provided with Fault indicators, Thermal protection, Overload protection and Single phasing preventer for motor. Control panel shall be PLC (Programmable logic controller) driven to ensure accurate operation with minimum or no failure. Auto / manual operation switch should be there. There should be a minimum 2 minutes of cleaning cycle every day. Water and disinfectants shall spray during cleaning cycle. Potable Water, Soap (Liquid Soap), Commercial Phenyl (White), preferable pH 7 Value, as disinfectant. PVC Sch 40 piping shall be used along the length of the chute.

b) Supplying, installation, testing and commissioning of 1 Fully automated Organic Waste composter of capacity 500KG per day equipped with a churning system to crush and mix the waste matter and having heating system to optimize the performance of microorganism and to accelerate the composing process. The composter shall have outside housing material made of MS with powder coating. The OWC shall be capable of volume reduction of up to 70 to 80%. The OWC shall be having a separate door for input waste and another separate door for getting out compost. The item includes dual blade waste Shredder of size 1m x 1m x 600mm complete having capacity of 2 HP and shredding capacity up to 200 kg per hour and a Bagging machine for packaging etc. complete as per approved design (quantity = 1 no.)

c) Supplying, installation, testing and commissioning of electrically operated compact size Shredders of capacity 650KG per day, having multiple number of high carbon steel blades to shred the bulky waste into small, consistent particles. The material size shall be reduced using a pusher system. The particle size shall be determined by the screen mesh hole size, ranging from 40 to 100mm. Shredder should be able to shred waste like household waste, kitchen waste, park waste, Plastic products, plastic bottle, plastic frame, plastic block, plastic can. Shredder will be installed below the chutes at 1st floor.

d) Closed type, Inclined Belt conveyor for transfer of Shredded Wet Waste from Container to Automatic Converter. The conveyer shall be 400mm width, enclosed type, material SS304, drive pulley with 125mm dia x 500mm lg machined and rubber lagged 6 mm thick; Conveyer speed = 22 mtr/m; motor capacity = 3 hp motor with 1440 rpm 3 phase IP 55 squirrel cage induction motor, one screw conveyer with bagging unit etc. complete as per approved design. (quantity = 14 metre approx.)

e) Annual Comprehensive Maintenance during DLP Routine / preventive maintenance and preparation of Pneumatic waste collection, transportation and processing & disposal system for dry & wet waste including breakdown & maintenance for defect liability period including repair and replacement of worn out items, hardware & updating of software etc. complete with minimum down time, as per Schedule attached including Cleaning of all Equipments, Plant room, vertical pipes, horizontal pipes and all other equipments procured under the original work & other items procured under this work in schedule manner as required / directed by Engineer in Charge. Including attending complaints related to the system. Electricity, water required to operate & maintain the system shall be made available free of cost.

AVIATION LIGHT

S& F of Aviation yellow painted die-cast aluminium alloy housing, built-in 75VA step up transformer, heat resistant, clear thick glass and accessories.as per ICAO-ANNEX 14 complete all as specified and directed by the Engineer-in-Charge. Make: BAJAJ Luminaire Type: BJAOL 1 with Neon Lamp Product No: 20075 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S& F of Aviation yellow painted die-cast aluminium alloy housing, red coloured polycarbonate dome and accessories as per ICAO-ANNEX 14 complete all as specified and directed by the Engineer-in-Charge. Make: BAJAJ Luminaire Type: BJAOL 2 BC Product No: 24973 or Techno-commercial equivalent in makes mentioned in Particular Specification.

S & F weather- proof PVC junction box of size 139 mm x 119 mm x 70 mm, having IP 65 protection for outdoor installation fixed with 4 way bakelite cable terminals including 03 Nos. of polyamide gland with check nuts fixed on poles with flat aluminium clamps, nuts, bolts, washers, etc. complete all as specified and as directed by engineer- in- charge.

LIGHTNING PROTECTION

TIER I- AIR TERMINATION Supply, Installation, Testing & Commissioning of 1 metre Vertical Aluminium Air terminal of dia 15mm to meet the requirement of IS/IEC 62305.Tested for Electrical, Mechanical, Environmental test and should have Impulse current withstand capability of 100KA (Class H)and as per IEC 62561-1&2 complete all as specified and as directed by the Engineer-in-Charge.

Supply, Installation, Testing & Commissioning of Aluminium Air terminal base for dia15mm,1 meter long Air terminal to meet the requirement of IS/IEC 62305 .Tested for Electrical, Environmental test and should have Impulse current withstand capability of 100KA (Class H)and as per IEC 62561-1&2 complete all as specified and as directed by the Engineer-in-Charge.

Supply, Installation, Testing & Commissioning of 25x3mm Aluminium Tape Conductor with fixing accessories and should be tested for electrical resistivity test , Tensile strength, Environmental Test (salt spray & humidity test) to meet the requirements of IS/IEC 62305 and IEC 62561-1&2 complete all as specified and as directed by the Engineer-in-Charge. (Air Termination - 950, Down Conductor/Ring Conductor - 2550)

Supply, Installation, Testing & Commissioning of Aluminium Square Tape Clamp for Cross connection and T connection of 25x3mm Aluminium Tape should be tested for electrical resistivity test ,Environmental Test (salt spray & humidity test),Mechanical test and Impulse current withstand capability of 100KA (Class H)to meet the requirements of IS/IEC 62305 and IEC 62561-1&2 complete all as specified and as directed by the Engineer-in-Charge. (Air Termination - 320, Down Conductor/Ring Conductor - 300)

Supply, Installation, Testing & Commissioning of U bolt rebar to Cable Clamp should be tested for Environmental Test (salt spray & humidity test),Contact resistance test and Impulse current withstand capability of 100KA (Class H)to meet the requirements of IS/IEC 62305 and IEC 62561-1&2 complete all as specified and as directed by the Engineer-in-Charge. (Air Termination - 14, Down Conductor/Ring Conductor - 210, Testing/Disconnecting Link - 14)

Supply, Installation, Testing & Commissioning of 50sq mm Green/Yellow PVC insulated Copper cable with terminal Lug, should have Each stranded of 1.7 mm diameter as per requirements of IS/IEC 62305 and IEC 62561-2:2012 complete all as specified and as directed by the Engineer-in-Charge. (Air Termination - 14, Down Conductor/Ring Conductor - 210, Testing/Disconnecting Link - 14)

Supply, Installation, Testing & Commissioning of Bi-metallic Connector should be tested for Environmental Test (salt spray & humidity test), Contact resistance test ,Mechanical test and Impulse current withstand capability of 100KA (Class H)to meet the requirements of IS/IEC 62305 and IEC 62561-1&2 complete all as specified and as directed by the Engineer-in-Charge. (Air Termination - 14, Down Conductor/Ring Conductor - 210)

TIER II - DOWN CONDUCTORS / RING CONDUCTORS Supply, Installation, Testing & Commissioning of Moisture inhibiting compound to meet the requirements of IS/IEC 62305 complete all as specified and as directed by the Engineer-in-Charge.

TIER III - TESTING / DISCONNECTING LINK Supply, Installation, Testing & Commissioning of Test link should be tested for Environmental Test (salt spray & humidity test),Contact resistance test, Mechanical test and Impulse current withstand capability of 100KA (Class H)to meet the requirements of IS/IEC 62305 and IEC 62561-1&2 complete all as specified and as directed by the Engineer-in-Charge.

TIER IV - EARTHING SYSTEM Supply, Installation, Testing & Commissioning of maintenance free Earthing system comprising of 250micron copper bonded earth rod 3 mtr x 3/4" Dia long Earth electrode, inspection pit with polymer lid is load rated to 5000kg and suitable for general to heavy duty, copper rod to tape clamp and 25Kg of Earth Enhancing compound whose resistivity is less than 0.12 as per IEEE 80-2013 & IS 3043-2018 for normal soil condition . The compound shall be free from carbon and graphite and conductive in nature and should accommodate 60% of its volume. The rod should be threaded on both ends and all component should be tested as per IEC 62561 complete all as specified and as directed by the Engineer-in-Charge. Note: 3m length shall vary depending upon soil resistivity.

Supply, Installation, Testing & Commissioning of 25x3mm Copper Tape Conductor with fixing accessories and should be tested for electrical resistivity test , Tensile strength, Environmental Test (salt spray & humidity test) to meet the requirements of IS/IEC 62305 and IEC 62561-1&2 complete all as specified and as directed by the Engineer-in-Charge.

Supply, Installation, Testing & Commissioning of Copper Square Tape Clamp for Cross connection and T connection of 25x3mm Aluminium Tape should be tested for electrical resistivity test ,Environmental Test (salt spray & humidity test),Mechanical test and Impulse current withstand capability of 100KA (Class H)to meet the requirements of IS/IEC 62305 and IEC 62561-1&2 complete all as specified and as directed by the Engineer-in-Charge.

HOT WATER SUPPLY

Supply and Fixing water heater storage type electric, capacity 15 Litres, BEE 5 star rated, Rated power input-2000W,Rated Voltage & frequency-230 V, 1Phase, 50 Hz AC, Rated Input Current-8.69 A, Energy Efficiency feature-Energy saving high density PUF insulation, Geyser protection from water splash-IPX4 technology to protect electrical parts from water splash, No, Net contents-1 N storage electric water heater , 1 N user manual , 1 N multi-function safety valve , 2 N fasteners & 2 N flexi pipes complete all as specified and as directed by the Engineer-in-Charge. Make: Havells Product No: Monza DX GHWAMGTWH025, HSN Code:8516 or Techno-commercial equivalent in makes mentioned in Particular Specification.

BLANK

CIVIL WORKS FOR DG SET AND ELECTRICAL TRENCH (OUTSIDE BUILDING)

M & L for reinforced concrete pipes, class NP-3, laid and jointed complete with collars for the size of 250mm dia complete all as specified and directed by Engineer-in-Charge.

M & L for construction of fly-ash brick masonry inspection chamber of size 750mm x 750 x 750mm (Internal dimensions) with PCC foundation 1:4:8 type D-2 using 40mm graded stone aggregate,150mm thick & 150mm wide offsets around over 10mm thick hard core, 200mm thick fly-ash brick masonry walls built in CM 1:6, 100mm thick PCC 1:2:4 type B1 coping finished even and smooth rendering 100 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in hard/Dense soil 6 mm thick MH sheet cover fixed on 25mm x 25mm x 6mm thick angle iron frame with hold fasts embedded in PCC Coping with locking arrangement, mild steel handle and painting to steel surface with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50m etc. complete all as specified and directed by Engineer-in-Charge.

STANDBY POWER SUPPLY (DG)

Supply, installation, testing and commissioning of silent DG Set, conforming to IS: 10002- 1981, complete with Diesel Engine of suitable BHP & AC Brushless SPDP alternator, conforming to IS: 13364- 1992, mounted on a common base frame & coupled through a flex disc complete with platform, control panel having meters, sound-proof canopy as per CPCB norms, etc. of capacity 400 kVA with inbuilt AMF panel complete all as specified and directed by Engineer-in-Charge. [a] Engine: Multi cylinder, in-line, 4 stroke, radiator cooled engine, well designed air handling system with dry type, heavy duty, replaceable paper element air cleaner with restriction indicator, air to air after cooling, optimised turbocharger for increased altitude, Inline fuel pump with class H electronic governing, spin on fuel filter, standard integral set-mounted radiator system, designed and tested for 50°C ambient temperature, full flow spin on lube oil filter, electrical starter motor with soft start engagement feature, battery charging alternator with 1 x 24 or 2 X 12 V DC dry type battery. [b] Alternator: Brushless type, screen protected, revolving field, self-excited alternator, conforming to IS/IEC 60034-1 3-phase reconnectable winding with 12 terminals brought out for connection, dedicated winding specially designed for single operation, impregnation on all wound components for better mechanical strength

[c] Control Panel: Manufactured with 14/16 gauge CRCA sheet and powder coated for weather-proof and long lasting finish. The control panel consists of the following parts: [i] Controller: Aluminium bus bars with suitable capacity with incoming/outgoing terminals [ii] Indicating lamps for ‘Load ON’ and ‘Set Running’ [iii] Instrument fuses duly wired and ferruled [iv] MCCB 600 Amps of suitable rating with overload and short circuit protections [d] Microprocessor based generator set monitoring and control system including an intuitive operator interface that allows for complete generator set control as well as system metering, fault annunciation, configuration and diagnostics, LED backlit LCD display with tactile feel soft-switches & generator set status LED lamps, remote START-STOP [e] Engine Metering: Oil pressure, engine temperature, starting battery voltage, engine running hours [f] AC Alternator Metering: L-L voltage and L-N voltage, current (phase and total), kVA (phase and total) and frequency [g] Engine Protection: Low lube oil pressure, high/low coolant temperature, battery over/under/weak volts, fail to crank/start, sensor failure, cranking lockout, low fuel level

[h] AC Alternator Protection: Over/under voltage, over/under frequency, loss of AC sensing. [i] Data Logging: Engine hours, control hours and up to 5 recent fault codes [k] 24 V DC operation [l] Silencer: Critical grade silencer suitably optimized to meet stringent noise emission latest standards of MoEF / CPCB [m] Mounting Arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. [n] Base frame with integral fuel tank is provided with drain plug, air vent, inlet and outlet connection, level indicator and provision for cleaning (h) Civil works:- All civil works related to foundation, installation of panel and equipment & depth of foundation shall be minimum 300mm with ant vibration pads, or as recommended by manufacturers. Cable from DG set to AMF panel, AMF panel to main panel will be measured under relevant schedule. Note:-The fuel for final testing of 12 hours shall be supplied by the contractor and cost deemed to be included in the above offer. All other necessary equipments like resistance load strip heater of suitable capacity/rating and any other items required for final testing shall be provided by the contractor without any extra cost to department.

GENERATOR AUTO SYNCHRONIZING, AUTO LOAD SHARING AND LOAD BASED START/STOP PANEL(400 KVA +400 KVA) Supply, installation, commissioning and testing of Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, cabling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. all complete as specified and directed by Engineer-in-Charge. (installed for 1000KVA TR main panel ) BUSBAR CHAMBER : 2000 Amps uniformly rated, continuous duty, 415 V AC, 3 Phase and full size Neutral Aluminium (Throughout the length) bus bars with colour coded heat shrink sleeves supported on SMC type grip supports, 50 KA for 1 sec.

SIGNAGE

M & L for Photo Luminescent (Night Glow) Way Finding Ceiling Hug Sign 4 mm ACP Sheet (Aluminium Composite panel) Clouding with 1.5”x1”x1.5mm MS Frame coated spray paint Photo luminescent film Base Colour Green Text Colour Off White Text Size 75mm and Vinyl Graphics mounted directly using 3M Self Adhesive tapes /Hanging with SS Stards CAPED SS Wire screws complete as all specified and directed by engineer- in- charge.

(a) 350mmx200mm

(b) 500mmx200mm

(c) 600mmx300mm

(d) 600mmx400mm

M & L for 525mmx500mm Photo Luminescent (Night Glow) Photo Luminescent Floor Level 4 mm ACP Sheet (Aluminium Composite panel) Clouding with 1.5”x1”x1.5mm MS Frame coted spray paint Photo luminescent film Base Colour Green Text Colour Off White Text Size 75mm, 35mm and Vinyl Graphics mounted directly using 3M Self Adhesive tapes / with SS CAPED screws complete as all specified and directed by engineer- in- charge.

M & L for 450mmx750mm Photo Luminescent (Night Glow) Staircase Number Plate 4mm ACP Sheet (Aluminium Composite panel) Clouding with 1.5”x1”x1.5mm MS Frame coted spray paint Photo luminescent film Base Colour Red Text Colour Off White Text Size 75mm and Vinyl Graphics mounted directly using 3M Self Adhesive tapes / with SS CAPED screws complete as all specified and directed by engineer- in- charge.

M & L for 850mmx375mm Photo Luminescent (Night Glow) Photo Luminescent Escape Signage 4 mm ACP Sheet (Aluminium Composite panel) Clouding with 1.5”x1”x1.5mm MS Frame coted spray paint Photo luminescent film Base Colour Red Text Colour Off White Text Size 75mm and Vinyl Graphics mounted directly using 3M Self Adhesive tapes / with SS CAPED screws complete as all specified and directed by engineer- in- charge.

M & L for Photo Luminescent (Night Glow) Photo Luminescent Refuge Signage 4 mm ACP Sheet (Aluminium Composite panel) Clouding with 1.5”x1”x1.5mm MS Frame coted spray paint Photo luminescent film Base Colour Green Text Colour Off White Text Size 75mm and Vinyl Graphics mounted directly using 3M Self Adhesive tapes / with SS CAPED screws complete as all specified and directed by engineer- in- charge.

(a) 350mmx550mm

(b) 400mmx700mm

M & L for 450mmx250mm Photo Luminescent (Night Glow) Photo Luminescent Floor Indication Board Signage 4 mm ACP Sheet (Aluminium Composite panel) Photo luminescent film Base Colour Green Text Colour Off White Text Size 75mm, 35mm and Vinyl Graphics mounted directly using 3M Self Adhesive tapes / with SS CAPED screws complete as all specified and directed by engineer- in- charge.

M & L for 600mmx400mm Photo Luminescent (Night Glow) Photo Luminescent Floor Plan with Location of Wet Riser/Hydrant Signage 4 mm ACP Sheet (Aluminium Composite panel) Clouding with 1.5”x1”x1.5mm MS Frame coted spray paint Photo luminescent film Base Colour Green Text Colour Off White Text Size 45mm, 35mm and Vinyl Graphics mounted directly using 3M Self Adhesive tapes / with SS CAPED screws complete as all specified and directed by engineer- in- charge.

DUSTBIN

Supply only plastic mobile containers for solid waste collection 120 litre, class 'A' as per IS 12402 with foot pedal operated lid with the quantity of following colours: (Green Combo - 21, Blue Combo - 21, Yellow Combo - 21)

Supply 5 LTR plastic Pedal splash dustbin (green) complete as all specified and directed by engineer- in- charge.

Supply 5 LTR plastic Pedal splash dustbin (blue) complete as all specified and directed by engineer- in- charge.

Supply plastic utility dustbin 5 LTR (yellow) complete as all specified and directed by engineer- in- charge.

SAFETY NET

Providing & fixing of Fall Arrest Safety Net all around the building at 6th floor level as per IS-11057:19841, Fabricated from ISI marked polypropylene ropes (IS-5175:1992) in knitted mesh of overall outer size 6mtx4mt. Having outer tie cord 12mm thickness and inner rope thickness 4mm tied on a grid of 100mm x 100mm with overlay shade net of 2mm dia. knitted at a square grid of 25mm size (weight of shade net should be minimum 50 gram per sqm.). These safety net should be tied / connected with the MS frame fixed to the building through 6mm thick MS plate along with dash fasteners M10 x 100 (Hilti / fisher / worth) as base of structure fixed with 50x50mm MS square pipe with minimum 2 coats of zinc oxide primer complete in all aspects. This base frame should be at the interval of 3mt or complete all as per Architectural drawings, as specified and as directed by the Engineer-in-Charge.

HORTICULTURE AND LANDSCAPE

[A] HORTICULTURE DEVELOPMENT Site preparation M&L for Clearing grass and removal of the rubbish outside MOD land complete all as specified and as directed by Engr-in-Charge.

Grass Areas M&L for Trenching in ordinary soil up to a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling within a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water complete all as specified and as directed by Engr-in-Charge. ( Good earth and manure are measured and paid seperately)

M&L for Rough dressing the trenched ground including breaking of clods complete all as specified and as directed by Engr-in-Charge.

M&L for Fine dressing of the ground complete all as specified and as directed by Engr-in-Charge.

M&L for Spreading of sludge, dump manure and/or good earth in required thickness complete all as specified and as directed by Engr-in-Charge. (Good earth and manure are measured and paid separately)

M&L for Mixing earth and sludge or manure in the required proportion complete all as specified and as directed by Engr-in-Charge. ( Good earth and manure are measured and paid separately)

Blank

M&L for Topiary cutting/shaping of plant removing of cut materials, cleaning, hoeing of plants complete design hoeing of trees (Topiary) watering, manure including the cost of all material etc. complete all as specified and as directed by Engr-in-Charge.

Earthwork in Mounds, Sweet Earth filling and Manure Supplying and stacking of good earth at site all as specified and as directed by Engr-in-Charge. (Good Earth measured in stacks will be reduced by 20% for voids)

Supplying and stacking of well decayed cattle manure at site complete all as specified and as directed by Engr-in-Charge. (cattle manure measured in stacks will reduced by 8% for voids)

[B] TREES and PALMS M & L The Trees and Palms sapling shall be healthy, vigorous specimen, well shaped, properly branched and well established, of the height specified. The tree sapling shall be planted in the positions demarcated, supporting it with a straight stout stake of bamboo, watered etc. The cost includes digging of pits & carting away soil 1.0M X 1.0M X 1.0M for a tree complete as per specifications.

(a) Azardirachta indica (Height-3m above bag, Caliper-60mm, Multi-branching)

(b) Delonix Regia (Height-3m above bag, Caliper-70mm, Multi-branching)

(c) Ficus racemosa (Height-3m above bag, Caliper-60mm, Multi-branching)

(d) Ficus infectoria (Height-3m above bag, Caliper-60mm, Multi-branching)

(e) Lagerstroemia indica (Height-3m above bag, Caliper-60mm, Multi-branching)

(f) Plumeria alba (Height-3m above bag, Caliper-60mm, Multi-branching)

(g) Polyalthia longifolia (Height-3m above bag, Caliper-60mm, Multi-branching)

Supply and planting of shrubs: The shrubs shall be healthy, vigorous specimens, well shaped, heavily branched (wherever applicable), densely foliated, well established and of specified height. The planting of shrub sapling shall be done in positions demarcated, with bamboo supports wherever necessary, watering etc. The cost also to include digging of pits 0.45M X 0.45M X 0.45M for shrubs complete as per specifications.

Large Shrubs (a) Hibiscus rosa sinensis (Height-1.8m above bag, Caliper-1m, Bushy, Multi-branching)

(b) Ficus black prince (1800mm High hedge) (Height-1.8m above bag, Caliper-0.75m, Bushy, Multi-branching)

(c) Tecoma gaudichaudi (Height-1.8m above bag, Caliper-0.75, Bushy, Multi-branching)

Medium Shrubs (a) Casuarina equastifolia (750mm High Hedge, Height-0.6m above bag, Caliper-0.75, Bushy, Multi-branching)

(b) Cassia biflora ( Height-0.75m above bag, Caliper-0.6, Bushy, Multi-branching)

(c) Ficus King bush ( 600mm high hedge, Height-0.75m above bag, Caliper-0.6, Bushy, Multi-branching)

(d) Ficus panda (600mm high hedge, Height-0.75m above bag, Caliper-0.6, Bushy, Multi-branching)

(e) Hamelia patens (600-750mm high hedge, Height-0.75m above bag, Caliper-0.6, Bushy, Multi-branching)

(f) Tabernae Montana coronaria'var' (900mm high hedge, Height-0.75m above bag, Caliper-0.6, Bushy, Multi-branching)

(g) Rhaphis excelsa (7500mm high hedge, Height-0.75m above bag, Caliper-0.6, Bushy, Multi-branching)

Small Shrubs (a) Yucca aloifolia ( Height-0.45m above bag, Caliper-0.3, Bushy, Multi-branching)

Bamboos Supplying bamboos as per approval and direction of Engineer-in-Charge. Bambusa ventricosa (Height-1m above bag, Caliper-0.6m, Minnimum 5 canes/plant)

PALMS & CYCADS Supplying palms & cycads as per approval and direction of Engineer-in-Charge. Royestonia regia (Height-3.5m above bag, Caliper-200mm, Minnimum 58 fronds/plant))

GROUND COVERS Supply and planting of ground covers and grasses: Gr. Covers and grasses shall be healthy and of specified variety. The planting of ground covers and grass saplings shall be done in positions demarcated, with watering etc. The cost also to include laying of garden soil to the required slope and preparing the planting base complete as per specifications and per approval and direction of Engineer-in-Charge. Roheo gold (Height 0.15m above bag, Caliper-0.15m, bushy, multi-branching)

[D] PAVER AREA FOR PARKING WORK Providing and fixing 18-20mm thick Granite stone (of any type) work (table rubbed and polished) flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) complete all as specified and directed by Engineer-in-Charge.

M&L for providing and laying 75 mm thk grass paver blocks of size 600 mm x 400 mm, over sub base of 40 mm thk sand bedding and 230 mm thk soling and on compacted earth all complete as per the drawing. Rate inclusive of cost of all materials, miscellaneous consumables, labours ,transportation of material to all required locations by approved means , tools, plant and machinery, hire and fuel charges and all other incidental charges etc., all required as per specifications, drawings and as directed by Engineer-in-Charge. The item rates shall hold good for work at all Levels ,lead, lifts, Heights, Depths etc.

FURNITURE

Manufacture & Supply of Almirah Large Steel 1/2H X 1/2S, complete all as specified and shown on drawing No. FD/E6/MAP/18.

Manufacture & Supply of Almirah Steel Medium, complete all as specified and shown on drawing No. FD-1032.

Manufacture & Supply of Hard Bed steel, complete all as specified and shown on drawing No. FD/E6/MAP/08(R).

Manufacture & Supply of Table Bed Side, complete all as specified and shown on drawing No. FD/E6/MAP/15(R).

Manufacture & Supply of Teapoy Verandah, complete all as specified and shown on drawing No. FD/E6/MAP/17.

Manufacture & Supply of Bath Stool PVC, complete all as specified and shown on drawing No. FD/E6/MAP/07.

Manufacture & Supply of Receptacle PVC, complete all as specified and shown on drawing No. FD/E6/MAP/13.

Manufacture & Supply of Ladder Aluminium 8' Long, complete all as specified and shown on drawing No. FD-1025.

Manufacture & Supply of Shoe Rack Steel, complete all as specified and shown on drawing No. FD/E6/MAP/02(R).

Manufacture & Supply of Chair Verandah, complete all as specified and shown on drawing No. FD/MAP-II/06.

Manufacture & Supply of Chair Computer complete all as specified and shown on drawing No. FD/E6/MAP/01.

Manufacture & Supply of Charpoy Folding IP with hard top, complete all as specified and shown on drawing No. FD-388(R).

Manufacture & Supply of Charpoy IP Hard top, complete all as specified and shown on drawing No. FD/MAP-II/01.

Manufacture & Supply of Chair Writing (Officers), complete all as specified and shown on drawing No. FD/E6/MAP/12.

Manufacture & Supply of Table Computer, complete all as specified and shown on drawing No. FD/E6/MAP/03.

Manufacture & Supply of Bin Soiled Lenin Large, complete all as specified and shown on drawing No. FD/E6/MAP/09.

Manufacture & Supply of Table dressing gents with mirror, complete all as specified and shown on drawing No. FD/E6/MAP/16.

Manufacture & Supply of Chair Dining (Officers), complete all as specified and shown on drawing No. FD/MAP-II/04.

Manufacture & Supply of Hat Stand with mirror, complete all as specified and shown on drawing No. FD-233.

Manufacture & Supply of Sofa 5 Seater Cushioned, complete all as specified and shown on drawing No. FD/MAP-II/02.

Manufacture & Supply of Side Board, complete all as specified and shown on drawing No. FD-1112.

Manufacture & Supply of Table Writing, complete all as specified and shown on drawing No. FD-275.

Manufacture & Supply of Table Dining 6 Person, complete all as specified and shown on drawing No. FD/MAP-II/03.

Manufacture & Supply of Table dressing Ladies including stool, complete all as specified and shown on drawing No. FD/MAP-II/07.

Manufacture & Supply of Table Centre, complete all as specified and shown on drawing No. FD-274.

Manufacture & Supply of Teapoy, complete all as specified and shown on drawing No. FD-382.

Manufacture & Supply of Peg Table, complete all as specified and shown on drawing No. FD-384.

MANNING & OPERATION OF LIFTS

Manning & Operation of fully automatic electrically operated passenger lifts of any make, type installed in the subject project as per schedule given above by placing 2 lift operators in 2 shifts of 8 hrs including Sundays and holidays (0600 hrs to 1400 hrs, 1400 hrs to 2200 hrs) including taking care of all lifts from any pilferage or damage etc (Total 9 Nos lifts) and 01 lift operator at night including Sundays & holidays during 60 months:-

(a) 11 months after completion of work

(b) 11 months after completion of BOQ item No. 41.02 here-in-before

(c) 11 months after completion of BOQ item No. 41.03 here-in-before

(d) 11 months after completion of BOQ item No. 41.04 here-in-before

(e) 11 months after completion of BOQ item No. 41.05 here-in-before

(f) 05 months after completion of BOQ item No. 41.06 here-in-before

COMPREHENSIVE MAINTENANCE OF LIFTS

Comprehensive maintenance and repairs of fully automatic electrically operated passenger lifts of any make and 20 Passengers installed in the subject project as per BOQ item Nos. 28.01 to 28.04 given here-in-above (Total 6 Lifts) comprising of all devices and accessories through out 12 months on all days including holidays for period of 03 years after expiry of defects liability period as shown below and all as specified and directed by Engineer-in-Charge

(a) 1 year after expiry of defects liability period

(b) 1 year after completion of BOQ item No. 42.02 here-in-before

(c) 1 year after completion of BOQ item No. 42.03 here-in-before

Comprehensive maintenance and repairs of fully automatic electrically operated passenger lifts of any make and 20 Passengers installed in the subject project as per BOQ item Nos. 28.05 to 28.08 given here-in-above (02 Lifts) comprising of all devices and accessories through out 12 months on all days including holidays for period of 03 years after expiry of defects liability period as shown below and all as specified and directed by Engineer-in-Charge

(a) 1 year after expiry of defects liability period

(b) 1 year after completion of BOQ item No. 42.06 here-in-before

(c) 1 year after completion of BOQ item No. 42.07 here-in-before

Blank

Blank

Blank

Blank

Comprehensive maintenance and repairs of fully automatic electrically operated passenger lifts of any make and 20 Passengers installed in the subject project as per BOQ item Nos. 28.13 to 28.16 given here-in-above (01 Lift) comprising of all devices and accessories through out 12 months on all days including holidays for period of 03 years after expiry of defects liability period as shown below and all as specified and directed by Engineer-in-Charge

(a) 1 year after expiry of defects liability period

(b) 1 year after completion of BOQ item No. 42.14 here-in-before

(c) 1 year after completion of BOQ item No. 42.15 here-in-before

(iv) The rate quoted under this Sch A shall be deemed to include for materials and labour required for comprehensive maintenance including repairs. (v) The work covered under Sch A will be ordered on the contractor by the respective Garrison Engineer on every year through a separate works order for the lifts installed in their area at the rate quoted by the contractor till completion of three years comprehensive maintenance. (vi) This contract shall be operative for the period of three years after expiry of defect liability period only for the purpose of comprehensive maintenance. (vii) In case of non function of Lift recovery shall be effected after the defect is noticed or notified either in writing or through a social media message by GE or his rep in terms of PS clauses mentioned in the tender.

MANNING AND OPERATION OF WATER SUPPLY INSTALLATIONS, FIRE FIGHTING AND DG SET INSTALLATIONS

Manning and Operation of water supply installation consisting of electricity operated pump sets (for fresh water, treated water and for firefighting) of different capacities including operation of SCADA system for automatic operation of Water supply pumping & distribution and DG Set of Subject project as per given in respective schedule including Sundays and holidays by one FGM and one Valveman in each shift and maintenance of log book, taking care of pumps/valves/overflow of tanks and other minor repairs and leakages daily in two shifts from 0600hrs to 1400hrs and 1400hrs to 2200hrs including Sundays/holidays all as specified and directed for 60 months.

(a) 11 months after completion of work

(b) 11 months after completion of BOQ item No. 43.02 here-in-before

(c) 11 months after completion of BOQ item No. 43.03 here-in-before

(d) 11 months after completion of BOQ item No. 43.04 here-in-before

(e) 11 months after completion of BOQ item No. 43.05 here-in-before

(f) 05 months after completion of BOQ item No. 43.06 here-in-before

Note for item No 43.01 – The rate quoted shall be deemed to be include the following - (i) The shift time shall be first shift from 0600hrs to 1400hrs. second shift from 1400hrs to 2200hrs. third shift from 2200hrs to 0600hrs (ii) The contractor has to apply for entry pass, for the labours to be employed against the work, from Naval Police with valid documents and shall submit Police verification of labours after receipt of work order through GE (iii) Operator must be skilled & must have knowledge of operation & maintenance of Pump Sets, DG Sets, Panel and controlling valves etc. (iv) Valve Man must be semi skilled & must have knowledge of controlling valves etc. (v) Consumable stores such as cotton waste, Grease including tools required shall be provided by the contractor. (vi) Operator must ensure cleanliness of Pump Sets/DG Sets/Panels and Pump house bldg. (vii) The rate quoted by the contractor shall be inclusive of Life insurance for the tradesmen employed by him in case of untoward incident such as injuries, fracture or casualty while on duty. (viii) Carrying out minor repairs viz recharging MCCBs, priming of Pumps, repair to pipe lines as directed. (ix) Inform the JE/ AGE (E/M) in charge of any electric faults, water supply failure, Diesel requirement for Gen Sets and any other mishappenings.

(x) Any major repair Machineries, replacement of batteries and filling of Diesel for Gen Set will be carried out by the MES (xi) Any other work, not specifically mentioned above, but ordered by the Engineer-in-Charge for the smooth functioning of Pump House for supply of water have to be carried out without any extra cost. Rates quoted shall be deemed to be included accordingly. (xii) Rates quoted shall be inclusive for Relief staff to the persons employed in shifts. (xiii) After issue of work order, contractor has to submit the list of employees including reserve alongwith relevant documents to the Engineer-in-Charge. (xiv) Payment to employees shall be done by Aadhaar linked bank account only and it shall not be less than minimum fair wages as per act in vogue. The contractor shall submit proof to Principal employer (GE) before claiming any payment. (xv) Contractor has to submit proof of payment of EPF subscription made by him alongwith RAR failing which RAR will not be progressed for payment. (xvi) The rates quoted by the contractor shall be deemed to be included provision of all latest labour laws/regulations including all relevant taxes as applicable. (xvii) Contractor shall quote the rates considering their monthly leaves, reliever etc as per labour laws and nothing extra shall be paid on account of the above. In case of absence of staff/tradesman from duty. Payment of that shift of detailed tradesman /staff will not be paid. In addition of that a penalty of Rs 2000/- per shift per person will be recovered from contractors dues. Also in case of long absence (more than one week) of staff/tradesmen, the penalty shall be recovered including Sundays & Holidays if any. The contractor shall have no claim on the account any penalty of Rs 2000/- per shift per person to be recovered.

COMPREHENSIVE MAINTENANCE OF WATER SUPPLY INSTALLATIONS, FIRE FIGHTING AND DG SET INSTALLATIONS

(01) Comprehensive maintenance and repair/replacement of W/S, F/F & DG Set installations consisting of all pumps, valves, starters, panels, cables, controls, scada items, wiring. fittings & fixtures, detectors, sprinklers, pipes, hydrants etc all inclusive of the items of works under the respective works schedules of this project of Sch 'A' item Part-XI, Part-XII, Part-XIII Part-XV, BOQ items 25.00 to 25.38, BOQ items 26.00 to 26.13, BOQ items 27.00 to 27.104 BOQ items 35.00 to 35.05 through out 12 months on all days including holidays for a period of 03 years after expiry of defects liability period as shown below and all as specified & as directed by Engineer-in-Charge.

(a) 1 year after expiry of defects liability period

(b) 1 year after completion of BOQ item No. 43.12 here-in-before

(c) 1 year after completion of BOQ item No. 43.13 here-in-before

Notes: (i) Rates quoted under the above comprehensive maintenance shall be for all kind of materials. components, parts, major or minor as the case may be and including labour complete. (ii) All kind of preventive and periodical checks & calibrations shall be carried out for all plants, machineries as per manufacturer's recommendations and standard operating procedures of OEMs. (iii) Periodical/schedule 'B' checks of DG sets consisting of replacement of engine oil, filters & other items shall be measured & paid separately under relevant BOQ item. (iv) Non-rectificationof Defects/Breakdowns - All major/minor repairs as required under this schedule will be carried out by the contractor after intimation by MES staff of contractor/site engineer (a) Within 48 hrs - for electrical faults like MCCBs, MCB, wiring, cabling, pnels, switches, controls, sensors, SCADA controls etc.

(b) Within 96 hours - for pumps valves, motors, DG Sets & other mechanical faults. Non-rectification of defects beyond above stipulated time period would be dealt with panel recovery as per following:- (c) Per pump per day (W/S or F/F) = Rs 5000 (d) Per DG Set per day + Rs 10,000 (e) SCADA sensors or controls per day = Rs 2000 (f) In case the defects are not rectified by contractor beyond a reasonable time of 10 days & the concerned plant remains unserviceable, the department shall be at liberty to undertake the necessary repairs under its own arrangement and the repair cost as produced by GE plus penal recovery charges as per above rates (since the dos of defect plus one) until completion shall be recovered from contractor as penal charges. (v) The penal recovery conditions & clauses as per note (iv) above shall be applicable even during the DLP period of 2 years after completion besides the period of 3 years of paid AMC.

COMPREHENSIVE MAINTENANCE OF EXTERNAL ELECTRIC SYSTEM

(01) Comprehensive maintenance and repair/replacement of complete external electrical system beyond BEST substation comprising of all items under Sch 'A' item Part-X and BOQ items 24.00 to 24.67 through out the 12 months on all days including holidays after expiry of defects liability period as shown below and all as specified & directed :-

(a) 1 year after expiry of defects liability period

(b) 1 year after completion of BOQ item No. 43.19 here-in-before

(c) 1 year after completion of BOQ item No. 43.21 here-in-before

Notes: (i) Rates quoted under the above comprehensive maintenance shall be for all kind of materials, components, parts, major or minor as the case may be and below labour complete. (ii) The repair/rectification of electrical breakdown shall be carried out urgently. (iii) Non-rectiifcation of defect hading to disruption of electric supply in part or full of building shall be dealt with penal recovery from contractor as per following:- (a) Non-rectification beyong 24 hours of reporting by department - Rs 24000 per day or pro-rata as the case may be. (b) In case of non-rectification beyond 48 hours and in case of breakdown of electric supply in part or whole of the project bldg. the department will be at liberty to carry out the repairs under its own arrangements and penal recovery shall be made on contractor as per the repair cost produced by GE concerned plus the pro-rata penal charges until the date of repairs since the time of defect.

PERIODICAL CHECK & MAINTENANCE OF DG SETS:

Material and labour for schedule 'B' check as per the period in months or as per hours of operaton 250/300 hourly maintenance, whichever is earlier, as per the periodicity specified by the OEM, for the 2x400 KVA DG Sets under this project that would require complete change of engine oil, lube oil filter, fuel filters, belts etc all as specified in OEM maintenance manual and as specified & as directed. (The daily or fortnightly check as applicable shall be deemed to be included in the manning & operation). (Note: 1.This item will be operated for entire 5 years i.e. DLP of 2years + 3 years of AMC)

COMPREHENSIVE MAINTENANCE OF BUILDINGS INCLUDING POLISHING OF FURNITURE

Comprehensive maintenance and repairs including replacement of materials of Buildings & Structures in Sch 'A' Part I and connected services of Internal water supply works covered under Sch 'A' part IV, BOQ SI No 22.01 to 22.24, Internal Electrification works covered under Sch 'A' part V, BOQ SI No 23.01 to 23.38, Fire Fighting works covered under Sch 'A' part XIII, BOQ SI No 27.001 to 27.104, TV/ Telephone conduits covered under Sch 'A' Part XVII and Horticulture and landscape covered under Sch 'A' Part XVIII, BOQ SI No 39.01 to 39.39 through out 12 months on all days including holidays for period of 03 years after expiry of defects liability period as shown below and all as specified and directed by Engineer-in-Charge.

(a) 1 year after expiry of defects liability period

(b) 1 year after completion of BOQ item No. 44.02 here-in-before

(c) 1 year after completion of BOQ item No. 44.03 here-in-before

STRUCTURAL HEALTH MONITORING SYSTEM (SHMS)

Supply, installation, testing and commissioning of following Items of SHM System complete all as specified and as directed by Engineer-in-Charge

a) Pressure Cell with SDI-12 Interface Unit Model No (EPS-30V-I)

b) Strain Gauge (Longitudinal & Transverse) with SDI-12 Interface Unit Model No (EDS-20V-E)

c) Thermistor Model No (ETT-10TH)

d) Strain Gauge with SD-12 Interface Unit Model No (EDS-20V-E)

e) Tilt meter with JB (2:1) Model No (EAN-93M) .

f) Tilt meter with Data logger Model No (ESDL-30MT) Note: Cost of Data SIM shall be borne by the contractor

g) Triaxial Ground Accelerometer Model No (EADA-350F) .

h) Automatic weather station Model No (EAWS-101)

j) Global Navigation Satellite System (on the top of pylon) Model No (EGNSS-101) including the following:-.

i) Receiver station with geodetic antenna

ii)Base station with choke ring antenna Model No (EGNSS-101)

k) Settlement points in raft Model No (EPS-12)

l) Settlement point (Prism target) Model No (ERT-10P2) .

m) Accessories

i) 4 Core cable for Pressure cell, Strain Gauge & Thermistor Model No (CS-1303)

ii) 6 Core cable, for SDI-12 Bus cable Model No (CS-0703)

iii) Junction box for Strain Gauge & Thermistor Model No (EJB-1-1)

iv) Junction box for TILT METER Model No (EJB-2-1)

v) Indicator for VW sensors Model No (EDI-54V)

MANNING AND OPERATION OF SHM SYSTEM

Manning and operation of the Web Based Data Monitoring (WDMS) with trained manpower during 60 Months after completion of the work as described below. (i) 1 No SHM System trained Engineer with knowledge of operation of SHM System, Remote data acquisition and handling with ability to provide meaningful interpretation of the data in Client friendly format. (ii) Acquisition of data twice in day (iii) Transmission of data once a day (iv) Monthly WDMS charges cover the cost of data sim, partial cost of software which is processing data (numerically & graphically), Triggering valve configuration/alerts, firmware updates from time to time

(a) 11 months after completion of work

(b) 11 months after completion of BOQ Item No. 46.02 here-in-above.

(c) 11 months after completion of BOQ Item No. 46.03 here-in-above.

(d) 11 months after completion of BOQ Item No. 46.04 here-in-above.

(e) 11 months after completion of BOQ Item No. 46.05 here-in-above.

(f) 5 months after completion of BOQ Item No. 46.06 here-in-above.

COMPREHENSIVE MAINTENANCE OF SHM SYSTEM

Comprehensive maintenance comprising of routine, preventive & breakdown maintenance of SHM System, comprising of all devices and accessories through out 12 months on all days including Sundays & holidays for a period of 03 years after expiry of Defects Liability Period (i.e. 24 months after certified completion of main work) all as specified and directed and as shown below:

(a) 1 year after expiry of defect liability period.

(b) 1 year after completion of the BOQ Item No. 47.02 here-in-before

(c) 1 year after completion of the BOQ Item No. 47.03 here-in-before

Rds Project ltd.